Availability
Coaxial Connectors
DX Engineering Next Generation Crimp/Solder 8U PL-259 Connectors
DX Engineering proudly announces our new, ultra-high quality, PL-259 connector that is so different from previous designs that we have a Patent**! DX Engineering Next Generation Crimp/Solder 8U UHF Male Connectors are now available to build your custom coaxial cable assemblies. Engineering studies have confirmed that the absolute best RF connections for double-shielded cables like LMR-400 and DXE-400MAX are made by crimping the shield, not soldering. However, most PL-259 crimped center pins aren't large enough and don't have enough contact area, which affects reliability. DX Engineering has solved those issues with these custom-designed connectors that we introduced on DX Engineering DX Series Coaxial Cable Assemblies. These PL-259s have soldered center pins that are full length and full diameter, so they connect properly, even with worn SO-239s. DX Engineering Next Generation PL-259CS8U series connectors achieve exceptional RF performance and power handling with these features: * All silver-plated brass shell and body * Silver-plated center pin securely mounted in PTFE dielectric * Center pin accepts large conductors and scalloped-tip allows generous solder flow * Crimped shield connection provides maximum reliability for all cables * Deep, double-knurled threaded shells for secure finger tightening * Fits all RG-8U size cables with center conductors up to 10 AWG including DXE-400MAX and LMR-400 as well as RG-213U, RG-11U and many others, including Belden 7810A, 8214, 8267 and 8237, 9913 and 9913F7. * Available in packages of 6, 12 or 24 connectors NOTE: DX Engineering offers reasonably priced, professional grade cable prep and connector crimping tools for an entire range of cables and connectors. Click "More Details" and the "Suggested Parts" tab to see available related products. Now you don't have to use the same old PL-259s. These advanced-technology PL-259 connectors let you build the highest quality coaxial cable assemblies. We designed them to be strong and lightweight and they represent a landmark improvement over decades-old, unchanged connector designs. This time, new IS better! Order DX Engineering Next Generation Crimp/Solder 8U UHF Male Connectors today and take advantage of DX Engineering innovations in RF connectivity! **U.S. Patent D745849
( 231 )
$39.99
—
$114.99
DX Engineering Next Generation Crimp/Solder 8X PL-259 Connectors
DX Engineering proudly announces our new, ultra-high quality, PL-259 connector that is so different from previous designs that we have a Patent**! DX Engineering Next Generation Crimp/Solder 8X UHF Male Connectors are now available to build your custom coaxial cable assemblies. Engineering studies have confirmed that the absolute best RF connections for double-shielded cables are made by crimping the shield, not soldering. However, most PL-259 crimped center pins aren't long enough and some don't even have enough crimped contact area, which affects reliability. DX Engineering has solved those issues with these custom-designed connectors that we introduced on new DX Engineering 8XDX Series Coaxial Cable Assemblies. These PL-259s have soldered center pins that are full length and full diameter, so they connect properly, even with worn SO-239s. DX Engineering Next Generation PL-259CS8X series connectors achieve exceptional RF performance with these features: * Fits all standard RG-8X size cables including DXE-8X, LMR-240 as well as RG-59, RG-62 and many others, including Belden 9258, 8241, 1505 and 7808 series * All silver-plated brass shell and body * Silver-plated center pin securely mounted in PTFE dielectric * Center pin scalloped-tip allows generous solder flow * Crimped shield connection provides maximum reliability for all cables * Deep, double-knurled threaded shells for secure finger tightening * Available in packages of 6, 12 or 24 connectors NOTE: DX Engineering offers reasonably priced, professional grade cable prep and connector crimping tools for an entire range of cables and connectors. Click "More Details" and the "Suggested Parts" tab to see available related products. Now you don't have to use the same old PL-259s. These advanced-technology PL-259 connectors let you build the highest quality coaxial cable assemblies. We designed them to be strong and lightweight and they represent a landmark improvement over decades-old, unchanged connector designs. This time, new IS better! Order DX Engineering Next Generation Crimp/Solder 8X UHF Male Connectors today and take advantage of DX Engineering innovations in RF connectivity! **U.S. Patent D745849
( 160 )
$33.99
—
$109.99
Amphenol RF Type N Male Crimp Connectors
Amphenol RF Type N Male Crimp Connectors are precision 50-ohm RF coaxial connectors that provide a positive, secure connection for your coaxial cable. Choose one of these different versions of the Type N connectors for your applications: 172102H-2 is our two-pack of the 172102-243 which has a larger center pin ID for DXE-400MAX and LMR-400. They work for 0.405 in. coaxial cables with larger 10 AWG through 11 AWG center conductor, including DXE-8U, some RG-8U, 8214, 9913, etc. 172102-2 is our two-pack of the 172102 that has the standard center pin that fits some RG-8U and RG-213 with smaller center conductors of 12 AWG, 12.5 AWG and 13 AWG. 172100-2 is our two-pack of the 172100 with the standard center pin for RG-58, LMR-195 and RG-400 (not 400MAX) size cables. N-Type connectors are designed to satisfy the need for a durable, weatherproof, medium-size RF connector with consistent performance through 11 GHz. Amphenol RF N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical. Amphenol RF N-Type connectors have high-quality gold-plated center pins to ensure the best performance for any application. They are sold as a pair. Amphenol RF connector details: * Description: Coaxial connector, N-Male * Body Material: Brass * Body Plating: White Bronze * Body Style: Straight * Contact Material: Gold-plated brass * Maximum Frequency: 11 GHz * Dielectric: PTFE * Gender: male (Plug) * Impedance: 50 Ohms Choose the coaxial connectors you need from our wide selection of coax adapters and connectors. When you need Type- N Male connectors, Amphenol RF Type N Male Crimp Connectors are always a good choice. Order yours from DX Engineering today!
( 27 )
$16.99
—
$28.49
Amphenol RF 83-1SP-6 PL-259 Coaxial Connectors
Amphenol RF 83-1SP-6 PL-259 Coaxial Connectors are quality RF products that provide a positive, secure connection for your coax cable. This part number is for a half-dozen connectors. These superior Amphenol RF brand PL-259 connectors have a nickel-plated shell and silver-plated body and pin that make soldering and assembly a snap. They have close manufacturing tolerances you can FEEL! Tough Liquid Crystal Polymer (LCP) dielectric insulation further ensures the best performance for your application. These superior PL-259 connectors are the genuine Amphenol RF coaxial connectors you have been asking for from our selection of DX Engineering connectors. Amphenol RF 83-1SP-6 PL-259s use the standard reducers (sold separately) for DXE-8X and RG-58 cables. You asked and we listened! Order your Amphenol RF 83-1SP PL-259 Coaxial Connectors from DX Engineering and enjoy genuine Amphenol quality!
( 54 )
$68.99
Times Microwave Systems® Coaxial Connectors
Times Microwave Systems Coaxial Connectors are innovative designs of the highest quality. Using genuine LMR® connectors and tools will assure reliable connections and quality you can trust. Times Microwave Systems LMR connectors are designed to work perfectly with LMR cables, so choosing and using Times connectors and termination tools assures reliable connections and puts Times quality you can trust to work for you. Although LMR cables through LMR-400 work with just about any manufacturer's connectors, LMR-600 cable requires Times Microwave Systems coaxial connectors. Order your cable and quality Times Microwave Systems Coaxial Connectors from DX Engineering! LMR® is a registered trademark of Times Microwave Systems.
( 38 )
$5.42
—
$136.99
DX Engineering Coaxial Connectors
The DX Engineering Coaxial Connectors shown here include two-part, silver-plated PL-259 and Type-N connectors designed to be crimped or soldered to the shield and soldered to the center conductor. These connectors deliver excellent performance for HF, VHF, and UHF applications. DX Engineering's PL-259 and Type-N connectors feature silver-plated brass throughout the outer and inner conductors and use PTFE dielectric—the best RF insulator—for very low loss and high electrical breakdown strength. Also available are DX Engineering Silver-Plated Reducers, which adapt standard solder-type PL-259 and Type-N connectors for use with single-shield RG-8X and RG-58U coaxial cables. While many types and grades of coaxial RF connectors are offered on the market, DX Engineering provides only top-quality connectors with silver-plated brass bodies and PTFE dielectric. These two-part solder-style connectors fit RG-213, RG-8U, RG-8X/LMR240 and other standard 0.405 in. single-braid shield coaxial cables intended for soldering*—but not 400MAX or LMR-400 double-shield cables. These solder-shield and solder-center connectors are the preferred choice for many Amateur Radio operators installing single-braid shield coaxial cables. Order your DX Engineering Coaxial Connectors and Reducers today! *NOTE: To prevent noise issues, modern engineering practice has determined that double shield cables that have one foil and one braid should not be soldered to the braid, including DXE-400MAX and LMR-400 style cables. Those cables should be terminated with crimp shield or clamp shield style connectors, also available from DX Engineering.
( 116 )
$11.99
—
$43.99
DX Engineering Silver Plated UHF Flanged Double Female Bulkhead Connector Kits
DX Engineering Silver Plated UHF Flanged Double Female Bulkhead Connector Kits are high-quality silver-plated connector kits that provide a positive, permanently secure connection for your coaxial cable. These two-sided female connectors have superior silver-plated bodies with silver contacts that ensure the best performance for any application. Silver plated connectors conduct RF very well, even when their outer surface tarnished. Their robust mounting flange, which employs four mounting screws, means that these bulkhead connectors won't work loose like those with concentric nuts and washers. Once mounted to any panel or bulkhead using the included DXE-FSM-HWK Hardware Kit, these flanged bulkhead connectors will provide the best possible connection and stay that way… period. Additionally, unlike many common nickel-plated bulkhead connectors, our silver-plated bulkhead connectors have no air space within their midpoint. This area of solid and superior PTFE dielectric between the center conductor and body maintains constant impedance and ultimate performance. When using our Radial Plate, Tower Leg Brackets or SO-239 Mounting Brackets, our Silver Plated UHF Flanged Double Female Bulkhead Connectors are the best way to bond your coax to ground this side of Cad-Welding! It's extremely important, when this connector is used with our DXE-RADP-3 Radial Plate, to ensure the best possible connection to the radials. No more RF current can flow within the antenna than is also delivered from the radials. A bad coaxial cable shield connection to the radial plate and the radials will limit your transmissions being heard by others and their signals heard by you. The same consideration applies when connecting your coax to Tower Leg Brackets and SO-239 Mounting Brackets for grounding purposes. Details for our Silver Plated UHF Flanged Double Female Bulkhead Connector Kits: * Description: Bulkhead mount, UHF female to UHF female * Body Material: Brass * Body Plating: Silver * Body Style: Flanged Dual Female * Contact Plating: Silver * Frequency Range: DC - 500 MHz * Dielectric: PTFE * Impedance: 50 Ohms * Includes DXE-FSM-HWK hardware Use of the included DXE-FSM-HWK hardware ensures an excellent connection of the flange of the connector - and hence the shield of the coax - to the ground to which the flange is connected. Comprised of a set of four 4-40 x 1/2 in. screws, four flat washers, four star washers and four nylon locking nuts, these hardware kits will keep your flange-mount coaxial connectors in place. Made of superior grade stainless steel and tough nylon, these hardware kits will last and stay bright for decades. DX Engineering Silver Plated UHF Flanged Double Female Bulkhead Connector Kits are the finest and most convenient bulkhead connectors available. Order yours today!
( 21 )
$18.28
DX Engineering FSM-HWK Hardware Kits
DX Engineering FSM-HWK Hardware Kits mount many chassis mount connectors with a flange, especially the DXE-UHF-FDFB UHF Flanged Double Female Bulkhead Connector and other SO-239 female chassis connectors. Comprised of a set of four 4-40 x 1/2 in. screws, four flat washers, four star washers and four nylon locking nuts, these hardware kits will keep your flange-mount coaxial connectors in place. Made of superior grade stainless steel and tough nylon, these hardware kits will last and stay bright for decades. Used on chassis, radial plates (DXE-RADP-3), coaxial cable grounding brackets (DXE-CGB-150, DXE-CGB-200), these hardware kits are virtually universal for mounting flanged coaxial connectors. NOTE: Hardware requires 3/16 in. and 1/4 in. nut drivers for 4-40 Bolt Hex Head and nylon-insert lock nuts, respectively. Whether you are mounting our DXE-UHF-FDFB flanged bulkhead connector or other flanged connectors, these FSM-HWK Hardware Kits from DX Engineering are your best hardware choice!
( 7 )
$5.29
Amphenol RF UHF Male Crimp Connectors
Amphenol RF UHF Male Crimp Connectors are lightweight units that are designed to operate up to 300 MHz. The PL-259 UHF Male connector has become the de facto standard for HF and VHF transmission lines. These connectors feature brass bodies finished in bright-nickel plating. Their Phenolic dielectric material resists water absorption, while their gold or silver-plated contacts ensure low-resistance connective surfaces. The PL-259 was the original US military designation for these "UHF" connectors, named for the upper frequency limit of their use at the time. Therefore, UHF Male for PL-259 and UHF Female for SO-239 are the terms recognized around the world. When shopping for UHF connectors, be sure to consider these Amphenol RF UHF Male Crimp Connectors now available from DX Engineering!
( 30 )
$23.99
—
$52.99
Amphenol RF 112533 Solderless BNC Male Connectors
Amphenol RF 112533 Solderless BNC Male Connectors are high quality terminations for RG-8X and LMR-240 coaxial cables and their equivalents. Sold in a 4-pack, these DX Engineering AML-112533-4 BNC male crimp connectors feature nickel-plated brass bodies, gold plated center pin and Delrin dielectric. BNC connectors are widely used on HT radios and test equipment. It's always a good idea to have a few available. Order Amphenol RF 112533 Solderless BNC Male Connectors from DX Engineering!
( 23 )
$16.59
DX Engineering Chassis Mount SO-239 Coaxial Connectors
DX Engineering Chassis Mount SO-239 Connectors are 50 ohm connectors that provide a positive, secure connection for your coaxial cables to or from your radio or antenna system. DX Engineering offers high-quality Amphenol® and non-Amphenol brand SO-239 chassis mount connectors for you to choose from. Silver plated brass bodies, conductors and PTFE dielectric or glass-reinforced PBT insulation ensures the best performance for your application. SO-239 panel mount connectors are also available and all connectors come with the correct hardware. Choose the coaxial connectors you need the most from our selection of DX Engineering Chassis Mount SO-239 Coaxial Connectors!
( 23 )
$7.49
—
$16.99
DX Engineering Cable Mount Crimp/Solder SO-239 Coaxial Connectors
DX Engineering Cable Mount Crimp/Solder SO-239 Coaxial Connectors are designed for RG-8X and LMR-240 cables, providing dependable performance for HF, VHF, and UHF applications. Each connector features a nickel-plated body and ferrule for durability and corrosion resistance, a gold-plated solder center pin, and a crimp-style shield termination. The PTFE dielectric ensures very low RF loss and exceptional electrical breakdown strength, making these connectors the preferred choice for many RF applications.
Not Yet Reviewed
$29.99
Amphenol RF N-Type Straight Crimp Plugs
Amphenol RF Type-N Male Crimp Connectors were developed to satisfy the need for a durable, weatherproof, medium-size RF connector with consistent performance through 11 GHz. Because of their superior performance, N-connectors are found on many Amateur VHF and UHF antennas. Their primary applications are the termination of small 50 ohm coaxial cables, including RG-8X, LMR-240 and other cables of the same size. RF coaxial connectors are the most important elements in the cable system. Copper coaxial cables have the potential to deliver all of the performance that your system requires, but they are often limited by the performance of the connectors. These connectors feature brass bodies finished in White Bronze plating. Their PTFE dielectric material resists water absorption, while their gold plated contacts ensure corrosion-free connective surfaces. Intermodulation Distortion (IMD), a major concern in today's communications systems, is consistently low with N-Type cable connectors. Additionally, all N-Type cable connectors are optimally impedance matched to their cables for low VSWR and insertion loss. Does your VHF/UHF or microwave operation suffer from connector insertion-loss or excess IMD? Cure that problem with Amphenol RF Type-N Male Crimp Connectors from DX Engineering!
( 2 )
$16.99
DX Engineering EX6XL Type-F Universal Compression Connectors
DX Engineering EX6XL Type-F Universal Compression Connectors work on all RG6U coaxial cables, solving the problems of trying to identify cable type and figuring out which compression connector to use. This connector's unique design fits any RG6 and RG6U coaxial cables, standard or self-healing (flooded). They install onto RG6U 60% braid, dual shield, such as RG-6U and F-6, including legacy DXE-F6 and DXE-6UF, as well as all Quad Shield RG-6U including DXE-RG6UFQ and DXE-RG6UQ. These F connectors have a long, rugged metal body, heavy duty black plastic and are direct replacements for all previous blue and purple F connectors. They are easily installed with common F-connector installation compression tools including DXE-SNS-CT1. Features of the DX Engineering EX6XL Type-F Universal Compression Connectors: - O-ring is a redundant seal and is always compression sealing, regardless of torque - Large tapered compression area creates a redundant moisture-tight interface - Three circumferential gaskets seal the body to the post - Gas-tight seal connection between the nut and the post Specifications: Bandwidth: 0 to 3 GHz Impedance: 75 ohm (nominal) Return Loss: Minimum -30 dB to 3 GHz Insertion Loss: Less than .10 dB to 3 GHz Operating Voltage: 90 V (at 60 Hz continuous AC) Operating Temperature:-40 F to + 140 F (-40 C to 60 C) Cable Retention: 45 lbs. (20.41 kg) minimum Meets or exceeds all SCTE Specifications
( 6 )
$13.99
—
$27.99
Amphenol RF 112116 Solderless BNC Male Connectors
Amphenol RF 112116 Solderless BNC Male Connectors are 50 ohm, lightweight bayonet-style crimp connectors designed to function through 4 GHz. They fit many small RF coaxial cable types including RG-58, RG-58A, RG-58A/U, RG-58B, RG-58C, LMR-195, RG-141, RG-303, Belden 9907, and Belden B7806A. Sold by DX Engineering in 4-packs, part number AML-112116-4, these connectors feature bright-nickel plated brass bodies with Delrin dielectric and gold plated brass center-pin contacts to ensure corrosion-free connections. BNC connectors are used for test equipment, receiving systems and many other applications for quick and reliable RF connections. Amphenol RF 112116 Solderless BNC Male Crimp Connectors are available here, from DX Engineering.
( 4 )
$13.99
Amphenol 83-798-2 UHF Chassis-Mount Coaxial Connectors
Amphenol 83-798-2 UHF Chassis-Mount Coaxial Connectors are precision RF connectors that provide a positive, secure connection for your coaxial cable. This pair of chassis-mount connectors has high-quality silver-plated conductors and PTFE dielectric insulation to ensure the best performance for any application. Amphenol 83-798-2 details: * Description: UHF 4-Hole Square-Flange Chassis-Mount * Body Material: Brass * Body Plating: Nickel * Body Style: Straight * Contact Plating: Silver * Dielectric: PTFE (Polytetrafluoroethylene) * Gender: Jack (female) * Impedance: 50 Ohms * Solder Terminal Type: Cup * RoHS Certificate: Yes Choose the coaxial connectors you need from our wide selection of coax adapters and connectors. When you need chassis-mounts, Amphenol 83-798-2 UHF Chassis-Mount Coaxial Connectors will satisfy any demanding application you have. Order yours from DX Engineering!
( 3 )
$28.99
Amphenol RF 83-1R UHF Chassis-Mount Coaxial Connectors
Amphenol RF 83-1R UHF Chassis-Mount Coaxial Connectors are precision coax connectors that provide a positive, secure connection for your coaxial cable. These chassis-mount connectors have high-quality silver-plated conductors and PBT dielectric insulation to ensure high performance for any application. Amphenol 83-1R details: * Description: UHF 4-Hole Square-Flange Chassis-Mount * Body Material: Brass * Body Plating: Nickel * Body Style: Straight * Contact Plating: Silver * Dielectric: PBT (Polybutylene terephthalate) * Gender: Jack (female) * Impedance: 50 Ohms * Solder Terminal Type: Cup * RoHS Compliant Choose the coaxial connectors you need from our wide selection of coax adapters and connectors. When you need chassis-mounts, Amphenol RF 83-1R UHF Chassis-Mount Coaxial Connectors will provide the chassis connection you need. Order yours from DX Engineering!
( 9 )
$16.99
DX Engineering Coaxial Connector Crimp Rings
DX Engineering Coaxial Connector Crimp Rings come in packs of 10, so they will always be handy when you lose one, step on one, or otherwise find yourself short on crimp rings. These parts are a critical component for crimp shield connector assembly. Choose your part number based on cable size type: CRIMP240RING fits LMR-240 and 8X connectors CRIMP400RING fits LMR-400, 8U, 213U and 400MAX PL-259/UHF male connectors. If you use crimp coaxial connectors, you never want to be caught without enough crimp rings! Order DX Engineering Coaxial Connector Crimp Rings now so you will always have them on hand.
Not Yet Reviewed
$9.99
—
$10.99
DX Engineering BNC Male RG-174 Coaxial Connectors
DX Engineering BNC Male RG-174 Coaxial Connectors are made specifically for use on DXE-RG-174V, RG-174, and other cables with a 0.110 OD jacket, 0.060 OD dielectric and 26 AWG center conductor. This high quality BNC male terminates RG-174 cable with a crimped shield, soldered center pin type connector that features a nickel plated body and shell, PTFE dielectric, silicone O-ring and gold plated center pin.
Not Yet Reviewed
$19.99
Amphenol 82-97RFX-2 Type N Chassis-Mount Coaxial Connectors
Amphenol 82-97RFX-2 Type N chassis-mount coaxial connectors are precision RF connectors that provide a positive, secure connection for your coaxial cable. This pair of chassis-mount connectors has high-quality silver-plated conductors and PTFE dielectric insulation to ensure the best performance for any application. Amphenol 82-97RFX-2 details: * Consistent performance through 11 GHz * Description: Type N 4-Hole Square-Flange Chassis-Mount * Body finish: Nickel * Body material: Brass * Center contact plating: Gold * Connector style: N Type * Dielectric material: Polytetrafluoroethylene (PTFE) * Fastening type: Threaded * Housing color: Silver * Impedance: 50 Ohms * Insertion loss: 0.15dB * Mating cycles: 500 * Operating temperature: -65 degrees C to 165 C When you need chassis-mounts at VHF and UHF frequencies, or all the way to mid-SHF, Amphenol 82-97RFX-2 Type N Chassis-Mount Coaxial Connectors will satisfy any demanding application you have. Order yours from DX Engineering!
( 1 )
$21.99
4O3A Coaxial Connectors
4O3A Coaxial Connectors deliver exceptional quality and performance for RF applications, featuring right-angle connectors compatible with RG-58 and RG-213/U coaxial cables. Available in both PL-259 and Type-N male configurations, these 50-ohm connectors ensure reliable signal transmission. Each connector includes a clamped shield, and a removable access cap for easy soldering of the center pin. With these features, 4O3A Coaxial Connectors are ideal for demanding amateur radio, broadcast, and communication installations.
Not Yet Reviewed
$16.99
—
$29.99
Amphenol RF 31-4427 BNC Male Coaxial Connectors
Amphenol RF 31-4427 BNC Male Coaxial Connectors are high-quality 50 ohm BNC plugs that fit RG-400, RG-142 and DXE-58AU coaxial cables. These silver plated brass connectors are installed with a soldered gold plated brass center pin and the shield is crimped with the supplied silver plated copper ferrule. They have a PTFE dielectric and a silicone rubber internal gasket. DX Engineering offers the excellent Amphenol RF 31-4427 BNC Male Coaxial Connectors in a package of two.
Not Yet Reviewed
$37.99
Amphenol 83-798-2-KIT UHF Chassis-Mount Coaxial Connector Kits
Amphenol 83-798-2-KIT UHF Chassis-Mount Coaxial Connector Kits are precision RF connectors that provide a positive, secure connection for your coaxial cable. This pair of chassis-mount connectors has high-quality silver-plated conductors and PTFE dielectric insulation to ensure the best performance for any application. Additionally, these kits include a set of four 4-40 x 1/2 in. screws, four flat washers, four star washers and four nylon locking nuts for each of both connectors. Made of superior-grade stainless steel and tough nylon, these hardware kits will last and stay bright for decades. Each of the two Amphenol 83-798 connectors features: * Description: UHF 4-Hole Square-Flange Chassis-Mount * Body Material: Brass * Body Plating: Nickel * Body Style: Straight * Contact Plating: Silver * Dielectric: PTFE (Polytetrafluoroethylene) * Gender: Jack (female) * Impedance: 50 Ohms * Solder Terminal Type: Cup * Mounting Hardware Included * RoHS Certificate: Yes Choose the coaxial connectors you need from our wide selection of coax adapters and connectors. When you need chassis-mount kits, Amphenol 83-798 UHF Chassis-Mount Coaxial Connectors will satisfy any demanding application you have. Order yours from DX Engineering!
Not Yet Reviewed
$39.57
Amphenol RF 83-1R-2-KIT UHF Chassis-Mount Coaxial Connector Kits
Amphenol RF 83-1R-2-KIT UHF chassis-mount coaxial connector kits are precision coax connectors that provide a positive, secure connection for your coaxial cable. This pair of chassis-mount connectors has high-quality silver-plated conductors and PBT dielectric insulation to ensure high performance for any application. RF 83-1R-2-KIT chassis mount kits include two Amphenol 83-1R chassis mount connectors and 4 screws, nuts, star washers and flat washers for easy mounting of each connector. Amphenol 83-1R-2-KIT details: * Description: UHF 4-hole square-flange chassis-mount * Body material: Brass * Body plating: Nickel * Body style: Straight * Contact plating: Silver * Dielectric: PBT (Polybutylene terephthalate) * Gender: Jack (female) * Impedance: 50 ohms * Solder terminal type: Cup * Stainless-steel mounting hardware included * RoHS compliant Choose the coaxial connectors you need from our wide selection of coax adapters and connectors. When you need complete chassis-mounts, Amphenol RF 83-1R-2-KIT UHF chassis-mount coaxial connector kits will provide the chassis connection and hardware you need. Order yours from DX Engineering!
( 3 )
$27.57