Availability
Computer Cables and Adapters
DX Engineering USB Isolator
DX Engineering USB Isolator, DXE-ISO-USB is an inline Solid State device that provides surge protection between two USB 2.0 devices, typically a transceiver and a computer. The DXE-ISO-USB is a passive device that requires no power, and it has two ports, one USB A and one USB B. It is bi-directional, so it can be installed in either direction. The supplied USB A to USB B standard patch cable, 19.7 in. (500mm), can be reversed and used for either type of equipment connection with the opposite connector to the mating port on the ISO-USB. A user supplied cable must have the opposite mating connector for the ISO-USB and its other end must have the USB connector type that provides connection to the second piece of equipment or computer. Often, an identical USB A to USB B will be on hand or is readily available. USB interface cables between several types of equipment can serve as a conduit to lightning pulses or other unexpected voltage pulses. For example, a damaging surge can occur whenever one device is connected to an antenna feedline that also has a USB cable to the other device, which is connected to a commercial AC power main, or through a DC power supply. The DXE-ISO-USB protects a transceiver from a voltage surge coming from the computer, and vice versa, it protects a computer from a surge from a transceiver. The maximum USB 2.0 speed of the DXE-ISO-USB is 480 Mbps (Mb/s). This supports RS-232 COM port data speeds greater than the fastest 115,200 bps baud rate selection found in most USB capable equipment. PLEASE NOTE: The DXE-ISO-USB does NOT support USB C Gb/s data speeds, and it does NOT pass sufficient DC current for charging or powering a device. Maximum current is 100mA (0.1A). It cannot be used for data storage devices and is not to be used for charging. In an unusual application, two different user supplied cables, USB A to USB C and USB B to USB C, could be used to provide DXE-ISO-USB protection between two USB C devices, as long as neither device is supplying or drawing power.
Not Yet Reviewed
$129.99
Digirig Filtered USB Cables
Digirig Filtered USB Cables provide a range of high-quality USB interface cables designed to easily connect your Digirig Mobile to a variety of computers and mobile devices. Each cable is built with premium materials, features copper conductors rated for 3A fast charging, and meets RoHS, CE, and ISO certifications. These USB interface cables are fully shielded and equipped with ferrite beads on both ends to minimize RFI. Whether you're replacing a lost cable, assembling a custom kit, or setting up multiple transceivers, these Digirig Filtered USB Cables deliver the performance and reliability you can count on.
Not Yet Reviewed
$9.97
FlexRadio USB to Serial Adapters
FlexRadio USB to Serial Adapters are genuine FTDI chipset USB to Serial adapters for the FlexRadio 6000 and 8000 to control external devices that utilize the RS-232 protocol. Requires SmartSDR 1.10 for this functionality. Note: This is not for CAT control of the radio, this is for controlling external devices attached to the USB ports on the back of the 6000/8000 series radios.
Not Yet Reviewed
$49.99
Digirig USB Isolators
Digirig USB Isolators are a compact and effective solution for effectively removing ground loop-induced hum and interference by isolating your PC from transceivers and audio devices. They also serve as a protective barrier for your computer when using USB-connected test equipment such as JTAG debuggers, oscilloscopes, and programmers. Built with high-quality components, the Digirig USB Isolator features signal isolation up to 2.5kV and power isolation up to 1.6kV, utilizing the ADUM3160 for signal and B0505S for power. It supports USB 2.0 Full and Low Speed devices, with a load capacity of up to 1W, though it is not recommended for charging devices that draw more than 180mA.
( 1 )
$19.70
4O3A USB to RS-485 Adapters
4O3A USB to RS-485 Adapters are a compact, level converter designed to convert USB serial data into a bipolar RS-485 signal, enabling long-distance communication thanks to its symmetrical signal levels. Commonly used to connect the Rotator Genius magnetic compass to a PC for calibration or sensor data retrieval, this adapter is powered directly via USB and requires no external power supply.
Not Yet Reviewed
$29.99
RigExpert USB Type-A to USB-C Cables
RigExpert USB Type-A to USB-C Cables feature a flexible, yet durable wear-resistant blue and yellow silicone outer jacket that retains these characteristics, even in cold temperatures down to 5° F (-15°C). Compatible with USB 2.0, 3.0, 3.1 and USB 3.2 data transfer standards, these 39.37 in (1m) long cables will handle up to 3.5A, allowing for quick device charging.
Not Yet Reviewed
$6.99
Gigaware USB-C To Micro USB Cables
These USB 2.0 cables have a USB-C connector on one end and a Micro USB connector on the other end and measure 3 ft. in length.
Not Yet Reviewed
$10.99
FlexRadio USB to Parallel Adapters
FlexRadio USB to Parallel Adapters connect to the USB port on the back of the FlexRadio Flex 6000 and 8000 series radios to other devices that utilize a parallel connection to control external devices. The cable features an FTDI CH323HM chipset that terminates in ten individual wires that can be interfaced with a male header. Requires SmartSDR version 1.10 or later. This cable is 18 in. (0.5m) long. The Interface guide provides examples of how to use the cable to connect to various devices including Amplifiers, antenna tuners, antenna controllers, and transverters.
Not Yet Reviewed
$49.99
RT Systems Radio Interface and Programming Cables
RT Systems Radio Interface and Programming Cables are assembled in the USA from quality parts to provide improved durability. To provide quality control, each cable is individually tested from radio to computer during manufacture. These cables are designed to address the specific computer/radio connection of each particular radio. Various cables are compatible with handhelds, mobiles, and HF rigs and receivers manufactured by Alinco, Wouxon, ICOM, Yaesu, Kenwood, Ten-Tec, and more. Many cables are only for programming. Other cables are only for control. Some cables do both! Most are USB, so when you need to connect your radio to your computer or laptop, these RT Systems Radio Interface and Programming Cables will let you get hooked up fast!
( 89 )
$12.00
VE2DX Electronics Filtered USB Cables
VE2DX Electronics Filtered USB Cables are available with various connectors, each with RF filtering for error free data transfer. High quality connectors and cables let your devicerun, charge and work better.
Not Yet Reviewed
$40.99
RT Systems USB-C to Legacy Connector Cables
RT Systems USB-C to Legacy Connector Cables provide the correct USB connector at the other end of the cable to make devices work together. These data cables are especially helpful when making that odd connection to a legacy or specialized device. Find he one you need here, or order all of them to have on hand. RT Systems USB-C to Legacy Connector Cables can save the day when you are bridging the gap from new to not-so-new devices!
Not Yet Reviewed
$6.95
—
$12.00
West Mountain Radio External USB Sound Card
This USB device may be used with any RIGblaster that uses the PC internal sound card. It adds another sound device to the PC so you don't need to use your primary sound device for the RIGblaster. The two audio cables that come from the RIGblaster/Radio will connect to this device, and then this device plugs into a USB port on the PC.
( 1 )
$9.95
West Mountain Radio RS232 Serial Cables
West Mountain Radio RS232 Serial Cables may be used between computers and digital mode interfaces or transceivers.
Not Yet Reviewed
$9.95
—
$19.95