Filters
HF Vertical Antenna Mounting Tilt Bases
Make servicing or tuning your vertical antenna an easy, one-man job! Our HF vertical antenna mounting tilt bases allow you to raise or lower your antenna in seconds—no...
Make servicing or tuning your vertical antenna an easy, one-man job! Our HF vertical antenna mounting tilt bases allow you to raise or lower your antenna in seconds—no climbing required. They even make it possible to quickly lower your antenna when bad weather is imminent! Designed for vertical antennas up to 28 feet tall, our HF vertical antenna mounting tilt bases are made from high-quality materials for long life in all outdoor conditions. Forget climbing ladders or removing brackets—our HF vertical antenna tilt bases take the hassle out of lowering your antenna. Get yours now!
Make servicing or tuning your vertical antenna an easy, one-man job! Our HF vertical antenna mounting tilt bases allow you to raise or lower your antenna in seconds—no climbing required. They even make it possible to quickly lower your antenna when bad weather is imminent! Designed for vertical antennas up to 28 feet tall, our HF vertical antenna mounting tilt bases are made from high-quality materials for long life in all outdoor conditions. Forget climbing ladders or removing brackets—our HF vertical antenna tilt bases take the hassle out of lowering your antenna. Get yours now!
DX Engineering Tilt Base Antenna Mounting Systems
The patented* DX Engineering Tilt Base Antenna Mounting Systems enable an operator to raise or lower an antenna in seconds, while leaving the base of the antenna securely attached to the mounting plate and post. DX Engineering Tilt Bases make it easy to tune your vertical, repair, or simply lower your antenna to a safe horizontal position long before bad weather hits. One person can install, raise and lower, and service their vertical antenna with our stainless steel Tilt Base; just walk it up or down. The Tilt Base prevents potential accidents when climbing a step ladder to tune the antenna, especially on soft ground. This is an essential tool that has helped countless hams eliminate the possibility of personal injury and damage to their ground-mounted vertical antenna. There is no need to remove brackets from the support posts and you will never again have to lift the entire weight of the antenna in order to tilt it down or tilt it up. Nearly two decades of customer comments about DX Engineering Tilt Bases (and the Radial Plate) have included "it's a work of mechanical art" and another exclaimed "...it's so gorgeous I don't want to mount it outside, I want to hang it on the wall!" Year after year, users are thankful for the amazing ease of the Lift, Slide and Tilt action of this antenna mount for making antenna adjustments simple. Recently, DX Engineering customer Michael, KO4VVH, said "I wondered why this bracket had a cost over $60, but when it arrived today I was blown away. Heavy duty doesn't do this beast justice. Heavy plate stainless steel and it is one of the best mounts I've ever owned. It's big and heavy... Ultra heavy duty. I will mount it up to my Hustler 5BTV HF antenna so I can drop it to ground level for maintenance, adjustments and SWR tweaks. Thank you!" Precision-cut from 3/16 in. 304 stainless steel, these Tilt Base Antenna Mounts are virtually indestructible. They conveniently mount to the same ground pipe or tubing that you use for the antenna and Radial Plate. You could use lag screws or carriage bolts to mount the Tilt Base and the Radial Plate to a wood post, but typically they are securely mounted to a 2 in. max. OD pipe using optional SSVC-2P saddle clamps, displayed in "Required Parts". There are five versions of the DX Engineering Tilt Base Antenna Mounting Systems kit designed for a variety of HF antenna types: DXE-TB-3P: Specifically designed with included stainless steel hardware to mate with the antenna mounting bracket of the Hustler 4, 5 or 6 BTV vertical antennas. DXE-TB-4P: This Tilt Base model provides a mounting plate and clamps for tilting a customer supplied antenna support mast up to 1.75 in. OD and 10 ft. tall, for mounting elevated no-radial vertical antennas that weigh less than or equal to 20 pounds, and have a height of no more than 28 ft. The Vertical antennas and mast assemblies must be adequately guyed. Precautions must be taken when raising or lowering to avoid undue lateral stress on the tilt mechanism. The TB-4P is the tilt option for legacy DX Engineering vertical antenna models DXE-30VE-1, DXE-40-VE-1 and DXE-40VA-1. See the DXE-TB-7P below for the replacement COM-30VA and COM-40VA Monoband Vertical Antennas. DXE-TB-6P: Is specifically designed to mate to the antenna mounting bracket of the Hy-Gain AV-14AVQ (HGN-AV-14AVQ). This special tilt base mounting system includes stainless steel hardware that allows the AV-14AVQ to be closer to ground level for maximum performance. DXE-TB-7P: Is specifically designed to mate to the COMTEK 30 Meter (COM-30VA) and 40 Meter (COM-40VA) Vertical Antennas. DXE-TB-8P: Is specifically designed to mate to the COMTEK 20 Meter Vertical Antennas (COM-20VA) which may be tuned to resonate on one band, 20, 17, 15, 12, or 10 meters. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *U.S. Patent 7,432,875
( 60 )
$83.99
—
$163.98
DX Engineering® OMNI-TILT® Vertical Antenna Tilt Bases
DX Engineering® OMNI-TILT® Vertical Antenna Tilt Bases are a completely new design that incorporates features that make this Tilt Base a 'must-have' for all types of vertical antennas. The OMNI-TILT® is patterned on the same proven safe technology as the patented DX Engineering® SAF-T-TILT® and the patented DXE-TB-3P Tilt Bases, that are designed to prevent the antenna from falling when the fasteners are loosened. The user simply lifts the OMNI-TILT® base plate and this positive action disengages the bolts from the top slot, which allows the user to easily and safely walk the ground-mounted antenna up or down for tuning, maintenance, stealth antenna stowing, or in the event extreme weather is on the way. Order one of these OMNI-TILT® models for your vertical antenna system: DXE-OMNITILT-1P for Hustler BTV Series and Hy-Gain AVQ Series Trap Vertical Antennas--Both antenna types use the supplied DXE-TVA-HWK Trap Vertical Mounting Hardware kit. DXE-OMNITILT-2P for Elevated Mount Verticals, include Cushcraft R8, R9, Hy-Gain AV-640, MFJ, GAP and many other antennas for HF and VHF – DXE-OTMC-250P Clamps (2) are included for customer-supplied upper antenna support tubing or pipe of 1.25 to 2.50 in. OD. NOTE: Both models REQUIRE two (2) optional DXE-OTMC-250P clamps to attach the non-tilt part of OMNI-TILT® to a user-supplied lower Mast Pipe of 1 1/4 to 2 1/2 in. O.D. The ability to attach this tilt base and your antenna to a pipe from 1 1/4 up to 2 1/2 in. is an important new feature of the OMNI-TILT®. Alternatively, all OMNI-TILT® models may be mounted on a 4 x 4 in. or larger wooden post with user-supplied attachment hardware; typically lag screws. This is why the DXE-OTMC-250P clamps for the non-tilt portion are NOT SUPPLIED, as they would be unused with wood-post installation and at added expense. DX Engineering® OMNI-TILT® bases are custom made from laser cut 1/8 in. thick Stainless Steel for strength and durability. All of the hardware used in the OMNI-TILT® Base is Stainless Steel to ensure long and dependable service. The DX Engineering® OMNI-TILT® is a 2-piece assembly of stainless steel U-shaped plates. As noted above, the OMNI-TILT® rear plate is typically mounted to your 1.25 in. to 2.50 in. steel pipe using the optional DXE-OTMC-250P Mounting Clamps, purchased separately for either model. The OMNI-TILT® front plate pivots on a pair of high-strength bolts. Both plates have extra holes to allow a wide range of optional mounting hardware to maximize the use of the OMNI-TILT® for many types of vertical antennas. For example, on both models OMNITILT -1P or -2P, the rear plate may be mounted with your hardware to a wood post, and the front plate accommodates other types of clamps for other antennas. DX Engineering® offers optional Tilt Base Wing Nut Knobs - DXE-AOK-OT1194 - that will allow for quick release of the DX Engineering® DXE-OMNI-TILT® base top bolts, without tools! Note: Whenever the DX Engineering® "Documentation" tab is available, please look at the associated files for additional product information. Once again, DX Engineering® innovation produces a great, multi-purpose system for mounting and accessing an HF, VHF or UHF antenna. With OMNI-TILT®, there is no need to ask for help because you will be able to walk your own antennas up and down. These tilt bases are perfect for stealth antennas, or if you are concerned about the weather, or for making antenna adjustments. Put the convenience of DX Engineering® OMNI-TILT® Vertical Antenna Tilt Bases under your antennas!
( 76 )
$105.98
—
$163.97
DX Engineering HF Antenna Mounting Tilt and Pivot Bases
Whether you are building a low-band or multi-band HF vertical starting with a 2 in., 3 in., or 4 in. base tubing, DX Engineering HF Antenna Mounting Tilt and Pivot Bases let you raise your vertical without asking for help! Featuring high strength Extren® insulated channels and all stainless steel construction, these tilt bases and pivoting fixtures are ready for your "Big Signal" HF antenna. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 7 )
$202.99
—
$729.99