Availability
HF Vertical Antenna Radial Plates
DX Engineering offers radial plates so good, they’re covered by two U.S. Patents! Our radial plates give you a neat, easy way to connect essential radial wires and coax...
DX Engineering offers radial plates so good, they’re covered by two U.S. Patents! Our radial plates give you a neat, easy way to connect essential radial wires and coax to your vertical antenna and help deliver the lowest takeoff angle for your transmissions. That means you get the strongest signal possible in all directions! Plus, we use only the finest stainless steel for our radial plates—no cheap, flimsy aluminum that dissolves in your soil! Don’t settle for inferior—get superior HF vertical antenna radial plates at an affordable price at DX Engineering. Find yours now!
DX Engineering offers radial plates so good, they’re covered by two U.S. Patents! Our radial plates give you a neat, easy way to connect essential radial wires and coax to your vertical antenna and help deliver the lowest takeoff angle for your transmissions. That means you get the strongest signal possible in all directions! Plus, we use only the finest stainless steel for our radial plates—no cheap, flimsy aluminum that dissolves in your soil! Don’t settle for inferior—get superior HF vertical antenna radial plates at an affordable price at DX Engineering. Find yours now!
DX Engineering Radial Plates
DX Engineering Radial Plates are made of 304 Stainless Steel, 1/8 inch thick and 11.625 in. x 11.625 in. outside dimensions. They are made with the finest Stainless Steel that will last! Not cheap aluminum that will dissolve in your soil! ".....it is so beautiful, I want to frame it and put it up on the wall - not in the dirt under my vertical. Sebastian - NS0W" Unique enough to be covered by two US Patents, (Pat. No. 6,927,740 and D533,167), the DX Engineering Radial Plate is meant for those of you that have or are building a quarter wave vertical antenna and who want an easy, neat and effective way to connect those essential radial wires and the coax to your vertical antenna for the lowest takeoff angle and strongest signals. Stainless steel construction assures that your signal won't disappear like a disintegrating aluminum radial plate. One OPTIONAL SADDLE CLAMP (SOLD SEPARATELY) IS REQUIRED to mount the DX Engineering Radial Plate to a ground mounted antenna support pipe, also sold separately. For STEEL pipe from 1 to 2 in. O.D. the all-Stainless Steel DXE-SSVC-2P is the REQUIRED clamp, sold separately. For STEEL pipe from 2 to 3 in. O.D. the all-Stainless Steel DXE-SSVC-3P is the REQUIRED clamp, sold separately. For pipe or rod whose O.D. is between 0.50 in. and 1.75 in. the DXE-CAVS-11P V-saddle clamp is the REQUIRED clamp, sold separately. For aluminum tubing from 1 in.to 2 in. O.D., the DXE-CAVS-2P V-saddle clamp is the REQUIRED clamp, sold separately. This plate will work perfectly with most commercially available vertical antennas such as the Hustler BTV series (4BTV thru the 6BTV), the SteppIR (BiggIR or SmallIR) or an antenna of your own construction. When used with the Hy-Gain AV-18HT Hy-Tower antenna, the radial plate will sit on the concrete under the base plate and will fit within the three concrete-mounted base/insulator pipes. The DX Engineering Radial Plate has a number of advantages over the other plates on the market: First, the DX Engineering Radial Plate will attach easily and rigidly to a 4x4 or 6x6 wooden post using simple wood screws, or to a steel or aluminum pipe (up to 3.0 in. outside diameter) using an OPTIONAL SADDLE CLAMP, SOLD SEPARATELY, to attach to whatever you have supporting your vertical. Size and clamp selection is detailed above. Second, this plate actually has a place where you can attach your coax! What a concept! The plate assembly has been drilled for optional SO-239 Chassis Mount and Bulkhead Fittings. This is a MUST item for proper handling of RF ground current! Regardless of how you do it, it is imperative that your coax be grounded to the radials to complete the circuit for your radial current. Third, the DX Engineering Radial Plate is laser cut from tough stainless steel so that it has smooth edges, won't corrode and will always look good. You will be proud of how good your installation looks. Fourth, it is square. Why? Because a square has more lineal distance around it than the round plates that you usually see. This allowed us to put 60 holes in it, use larger bolts for more clamping power and still not crowd them together. Remember: The more current that flows in through your radials and through this plate, the stronger your signal is going to be and the more DX stations that you are going to hear. So, put on as many radials as you can. Fifth, we supply the correct Stainless Steel bolts, nuts, star washers, flat washers and lock washers to attach the radials. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For the absolutely finest made radial plate available, order DX Engineering Radial Plates. Suggested as a station upgrade product - make more contacts to worldwide DX stations and DXpeditions
( 83 )
$99.99
Chelegance JPC-12 Radial Plates
Chelegance JPC-12 Radial Plates help the performance of the JPC-12 Antenna System. This 4.33-inch diameter, 0.11 inch thick aluminum plate weighs in at just 4.23 oz and provides studs to connect up to 8 sets of radial wires. A 0.375 inch hole in the center of the plate allows for placement under the JPC-12. This lightweight radial plate is easy to carry and easy to deploy.
Not Yet Reviewed
$23.99