Microphones: Heil Sound, Kenwood, Icom & More

Yaesu M-90D Desktop Microphones

Yaesu M-90D Desktop Microphones utilize a finely tuned dynamic element to deliver rich low to mid frequency response, desirable for a clear and concise conversational sound that is pleasing to the ear of the listener. The oversize dynamic microphone element and windscreen of the M-90D is designed to accentuate voice input from the front and limit ambient noise and sounds from the side. The attractive desk stand base of the M-90D features a large PTT bar switch, a PTT lock button, and both 8-pin modular and round connectors at the back. By swapping the orientation of the supplied coiled cord cable with 8-pin round and modular connectors at either end, the M-90D may be used with virtually any Yaesu HF transceiver*. For difficult band conditions, a built-in, low-cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave). An integrated isolation transformer enhances the audio quality of this fine microphone, which also uses three air cylinder tubes, similar to the M-1 Reference Microphone, to provide a lifetime of solid, smooth, and noiseless PTT operation. Yaesu M-90D Desktop Microphone specifications: Microphone type: Dynamic element, preamplified Supply voltage: 5.0 V DC ±10 percent (supplied by most Yaesu transceiver mic connectors*) Frequency response: 30 to 17000 Hz Sensitivity: -60 dB (1 kHz 0 dB=1V/1Pa) Microphone impedance: 600 ohms Dimensions (WHD): 4.17 x 7.56 x 4.98 in. (106 x 192 x 126.5mm) Height maximum when microphone head position is flat Weight: 18.70 oz. (530 g) without cable NOTE: The M-90D Mic head does not disconnect from the desk stand base for other uses. (See M-90MS Mic Head for boom or mic stand applications.) The M-90D is directly compatible with the FTDX101 Series, FTDX10, FT-991A, FT-891, FTDX5000 Series, FTDX3000/D, FTDX1200, FTDX9000 Series, FTDX2000/D, FT-950, FT-450/D, FT-897/D, FT-857/D, FT-818ND, FT-817/ND, FT-900, FT-847, FT-920, FT-1000MP, FT-1000MP MARK-V and FT-1000MP MARK-V Field. *Optional Power Supply Kit ABB19X001 required for M-90D use with Legacy Yaesu FT-1000/D, FT-990, FT-890, FT-840 and FT-747 transceivers.

4.78 out of 5 stars ( 46 )

$199.99

Yaesu M-70 Desktop Microphones

Yaesu M-70 Desktop Microphones blend classic design with 21st Century features for a stylish, self-contained and affordable cardioid desk mic for your Yaesu transceiver operating pleasure. The M-70 utilizes a directional condenser microphone element which has precisely tuned frequency response to obtain clear and crisp audio quality. Along with its built-in preamplifier, the M-70 uses three Air-Cylinder tubes, similar to the Reference Microphone M-1, to provide a solid and smooth extended operation. The M-70 has a simple one-touch PTT key lock button placed just above the PTT key for those long rag chews. This mic preamp features an isolation transformer integrated into the circuit board to enhance audio quality. Also, a built-in Low-Cut filter allows shaping of the low frequency response with a roll-off at 340Hz, -6dB/octave. An ON/ OFF sliding switch is located on the bottom of the microphone. The M-70 is compatible with all modern Yaesu HF transceivers. Both types of 8-pin mating connectors are on the rear of the M-70 base. By swapping the orientation of coiled cord with opposite connectors at each end, it connects to Yaesu radios equipped with either an 8-pin round or an 8-pin modular mic connector. * Note: A YSU-ABB19X001 Power Supply Kit (sold separately) is REQUIRED When connecting the M-70 Desktop Microphone to the following legacy Yaesu transceivers: * FT-1000/D * FT-990 * FT-890 * FT-840 * FT-747 Order original equipment Yaesu M-70 Desktop Microphones for your Yaesu transceivers from DX Engineering.

4.96 out of 5 stars ( 57 )

$159.99

ICOM SM-50 Desktop Microphones

ICOM SM-50 Desktop Microphones are unidirectional dynamic microphones designed for base station operation with select ICOM transceivers. These microphones cannot be used with non-ICOM transceivers since their electret elements require power that is supplied from the connected transceiver. SM-50 microphones feature Up-Down tuning on compatible ICOM transceivers. There is a switch for PTT, a PTT lock feature, and a low-cut switch that is available on the top of the base to cut out the low frequency components on input voice signals. On the bottom of the microphone base there is a gain adjustment. SM-50 microphone cables terminate to a standard ICOM 8 pin microphone plug. ICOM SM-50 Desktop Microphones are the most complete ham station desktop microphone console you'll ever own!

4.79 out of 5 stars ( 19 )

$375.99

ICOM SM-30 Desktop Microphones

ICOM SM-30 Desktop Microphones are compact, lightweight, unidirectional, electret condenser microphones. These quality desk microphones feature a selectable low cut function and a microphone output level that can adjusted by a trimmer on the bottom of the microphones. Their bases have PTT and PTT Lock switches and a red "PTT lock" lamp. The characteristics of SM-30s have been optimized for SSB and FM voice communications. These SM-30 microphones' cables terminate to standard ICOM 8 pin round microphone plugs. SM-30 Desktop Microphones may also be used with select ICOM mobile transceivers that have modular microphone jacks, using the correct adapters. (Example: ICOM OPC-589 adapter cable, 8-pin modular to 8-pin round mic receptacle) ICOM SM-30 Desktop Microphones offer the right combination of features and value!

4.96 out of 5 stars ( 52 )

$245.99

Heil Sound Microphones

Heil Sound Microphones cover the audio spectrum with models for virtually every Professional and Amateur sound application. Specific Heil microphones are best selected and matched to their intended uses for instruments, drums, and voice. From live music to studio recording, broadcasting, and all types of Amateur Radio operating, Heil microphones have set new standards for audio excellence, providing the clarity and wide-range response that audio and radio professionals require and Amateurs demand. Experience counts in design and implementation, and every unique Heil Microphone brings a significant contribution to the art of audio recording, reproduction, transmission and the Science of Sound. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. "Buy from a name you can trust." That quote is thrown around a lot in advertising. But when it comes to microphone audio, Heil Sound Microphones are, indeed, a name you can trust!

4.87 out of 5 stars ( 71 )

$89.00

—

$379.00

Heil Sound's iCM Microphones

Heil iCM microphones are high performance mics specially designed for owners of earlier ICOM transceivers that exhibit low gain in the microphone amplifier stage. Two models are available: the original Silver version and the new Black and Gold version. Not cheap electret microphones, the iCMs utilize a high-quality condenser element with a broad frequency response (35 Hz to 12 kHz) and high output that is crafted for compatibility with the ICOM transceivers. The iCM microphones were designed in close collaboration with ICOM's engineering team and are housed in a beautiful platinum-finish enclosure, making them ideal for hand-held use or for mounting on a boom or desk stand. The iCMs are shipped with microphone clips compatible with Heil Sound base stands and booms. The iCMs are fitted with an 8 ft. length of Heilwire cable terminated in an 8-pin round mic connector that's wired for the ICOM transceivers. A 1/4 in. inline phone jack accepts PTT input from a foot switch or hand switch. A "light touch" PTT switch is mounted on the body of the iCMs. Make your ICOM rig "sing" like never before with Heil iCM microphones.

4.82 out of 5 stars ( 38 )

$149.00

Yaesu M-1 Reference Microphones

Yaesu M-1 Reference Microphones are the ultimate, high-quality, most-innovative desktop microphones and are dedicated to the most discriminating Ham Radio Operators. They feature combined Condenser (Electret) and Dynamic microphone elements. The Condenser Microphone Element produces greater frequency response and a clear, crisp audio characteristic that's perfect for being heard on crowded bands and in big DX pile-ups. The Dynamic Microphone Element delivers the rich low to mid tonalities, much favored for local QSOs and rag chewing. The response of each microphone element may be adjusted independently using the internal, Nine (9) Band, Graphic Equalizer. Each element has a separate gain control for independent adjustment of output levels. The output of each microphone may be selected separately, or they may be combined to produce the most pleasant tonal quality. Both the Condenser Element and Dynamic Element in the M-1 utilize the Nine (9) Band Graphic Equalizer centered at (63Hz, 125Hz, 250Hz, 500Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz). Each element's frequency response is independently adjustable. Two (2) frequency response memories and a "through" (bypass) mode are provided for each element, and are easily switchable by using one-touch buttons on the microphone base. The supplied TBC (Treble Boost Cowling) enhances the voice response around the important 1 to 1.5 kHz range. Attaching the cowling creates a condensed unique tonal texture that is pleasing for many. The PTT key uses three Air Cylinder Tubes which incorporate a contactless magnetic switch that ensures long-life and stable, noiseless operation. Yaesu's M-1 supports a wide range of Yaesu models including the FTDX-101D and FTDX101MP, FTDX10, FTDX-9000 and FTDX-5000 series, FTDX-3000/D, FTDX-1200, FT-2000/D, FT-991A, FT-891 and the FT-450/D as well as many other Yaesu rigs. NOTE: Do NOT use this microphone on the following: FT-2400H / -7400 series, FT-2500 or FT-8500. Damage may result from modular jack wiring incompatibility. Other included features are: * Reversible cabling for 8-pin round or 8-pin modular use * 3-pin XLR output for FTDX-9000 * Record and playback capability (20 seconds), to confirm the audio tonality * Large red TX LED Indicator * Large Graphic Equalizer / Frequency Response Scope LCD Display with anti-reflective coating * Headphone jack * Touch PTT key lock * Built-in low-cut filter to shape the low frequency response * Cannon-type (XLR) output plug connector * Audio output volume control for headphones Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Supplied Accessories: * TBC (Treble Boost Cowling) * Microphone cable * AC adapter * Operating Manual Your Yaesu transceiver features transmit audio circuitry that is some of the best in the world. Tailor the sound reaching that circuitry with Yaesu M-1 Reference Microphones from DX Engineering!

5.0 out of 5 stars ( 16 )

$899.99

Yaesu M-100 Dual Element Desk Microphones

Yaesu M-100 Dual Element Desk Microphones are following in the tracks of Yaesu's highest-grade reference desk microphone: the Yaesu M-1. These are high-end dual-element microphones that may be used on many Yaesu transceivers. Their new M-100 model omits the equalizer and display features of the M-1. Yaesu's M-100 supports a wide range of Yaesu HF transceiver models, including the FTDX-101D and FTDX-101MP, FTDX-10, FTDX-9000, FTDX- 5000, FTDX-3000, FTDX-1200, FT-2000/D, FT-991A, FT-891 and FT-450/D—as well as many other Yaesu HF rigs. Yaesu's high-performance M-100 can be very effectively operated with punchy transmit audio in DX and contest operation. They are recommended for all voice modes from SSB to C4FM! Some exciting M-100 features: * Dual element design: Dynamic element AND condenser (electret) element * Low cut and high cut are manually selectable * Creates unique sound quality with its treble-boost cowling * Air cylinder/magnetic switch for effortless PTT * Pedestal-base mount isolates vibration, resulting in pure sound Here's your chance to add exceptional TX audio to your rig. Order one of these fine Yaesu M-100 Dual Element Desk Microphones for contesting, DXing or just because you want the best TX audio you can have!

5.0 out of 5 stars ( 10 )

$529.99

Yaesu Hand Microphones

Yaesu Hand Microphones are original equipment and upgrade hand mics for Yaesu mobile and base transceivers. Standard and DTMF keypad versions are available as replacements or to enhance your radio operation. Specialized features enable the full functionality or open additional capabilities on some radios. Order Yaesu Hand Microphone replacements from DX Engineering.

4.69 out of 5 stars ( 36 )

$59.99

—

$99.99

ICOM HM-219 Hand Microphones

ICOM HM-219 Hand Microphones are the same high-quality microphones as included with IC-7300 transceivers. The great audio reports for these rigs have got to start with a great microphone. HM-219 hand mics fill the bill very nicely. These sensitive, noise-cancelling electret microphones deliver superior transmit audio to the leading HF transceiver in its price class. Knowing the capability of their IC-7300, ICOM couldn't hang anything but a high-quality microphone on their new rig. All reviews of the TX audio from IC-7300s are stellar! Keep your 7300 in super shape with ICOM HM-219 Hand Microphones from DX Engineering!

5.0 out of 5 stars ( 12 )

$63.99

Yaesu M-90MS Microphone and Stand Mounting Kits

Yaesu M-90MS Microphone and Stand Mounting Kits bring the great Yaesu microphone sound to your boom or mic stand, for a completely new way to enjoy your Yaesu transceiver. The Yaesu M-90MS microphone head utilizes a finely tuned dynamic element to deliver rich low to mid-frequency response, desirable for a clear and concise conversational sound that is pleasing to the ear of the listener. The oversize dynamic microphone element and windscreen of the M-90MS is designed to accentuate voice input from the front and limit ambient noise and sounds from the side. The attached microphone cable features a PTT hand switch with an 8-pin modular connector termination. The M-90MS may be used with virtually any Yaesu HF transceiver* with some models requiring the optional SCU-53 8-pin modular jack to 8-pin round plug adapter**. For difficult band conditions, a built-in low-cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave). An integrated isolation transformer enhances the audio quality of this fine microphone. Yaesu M-90MS microphone specifications: Microphone type: Dynamic element, preamplified Supply voltage: 5.0 V DC ±10 percent (supplied by most Yaesu transceiver mic connectors*) Frequency response: 30 to 17,000 Hz Sensitivity: -60 dB (1 kHz 0 dB=1V/1Pa) Microphone impedance: 600 ohms Dimensions: Diameter: 2.45 in. (62mm), Length: 6.38 in. (162mm) Weight: 7.05 oz. (200 g) with bracket, without cable NOTE: The M-90MS includes the boom or stand mount bracket. A boom or mic stand are not supplied. The M-90MS microphone head does not have a detachable connector. The Yaesu M-90MS comes with the PTT hand switch and 8-pin modular connector cable that is directly compatible with the FTDX10, FT-991A, FT-891, FT-450/D, FT-897/D, FT-857/D, FT-18ND, FT-817/ND, and FT-900. ** SCU-53 8-pin modular jack to 8-pin round plug adapter is required for use on FTDX101 Series, FTDX5000 Series, FTDX3000/D, FTDX1200, FTDX9000 Series, FT-2000/D, FT-950, FT-920, FT-1000MP, FT-1000MP MARK-V, FT-1000MP MARK-V Field, and FT-847. *Optional Power Supply Kit ABB19X001 and SCU-53 are required for M-90MS use with Legacy Yaesu FT-1000, FT-990, FT-890, FT-840 and FT-747 transceivers.

4.6 out of 5 stars ( 5 )

$169.99

On Sale

INRAD Dynamic Microphones

INRAD Dynamic Microphones are an exciting new line of great sounding microphone models. Each of these five microphones has an attractive stage-style body and a unidirectional cardioid element with unique audio characteristics to accommodate every operator's voice, radio and preferences. INRAD microphone models are available that provide full range studio sound to audio response intended for DXing and contesting punch, and everything in between! These mics provide great sounding, crystal clear voice audio for every one of your transceivers at very competitive prices. Please click or tap the title of a listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals, technical articles, charts and guides appear in Documentation. Each INRAD Desk Microphone is supplied with a 3-pin XLR to 1/8 in. (3.5mm) mono male cable, which is in turn connected to your HF transceiver with the appropriate optional adapter. Choose from adapter cables for 8 pin round mic connection to Kenwood, Elecraft, Yaesu, Ten-Tec, legacy 8-pin round FlexRadio, 3.5mm for FlexRadio 6400/6600 models, or 8-pin modular for some Yaesu transceivers. Each adapter has the 1/8 in. (3.5mm) mono female for the mic audio and a 1/4 in. (6.35 mm) mono female for push-to-talk (PTT) hand switch or foot switch. Note: INRAD Dynamic Microphones are suitable for late model Icom transceivers including IC-7300, IC-7610, IC-7600, IC-7851 and PRO models with required adjustments of mic gain and audio EQ settings. They are not recommended for IC-7200, IC-718 and older Icom pre-PRO models. Also available are the optional INRAD DMS-1 PTT Desk Stands, INRAD M605 Desk Stand with Microphone Clip, M-FS Foot Switch, and M-HS Black or M-HS-SILVER toggle switch. INRAD mics don't have PTT switches, but simply key up with an external PTT switch, with VOX, or use the transmit button on your radio. If you are looking for a great microphone value, check out INRAD Dynamic Microphones from DX Engineering!

4.9 out of 5 stars ( 20 )

$69.00

$41.40

—

$79.00

FlexRadio Hand Microphones

FlexRadio Hand Microphones feature condenser elements, and are designed for use with the FlexRadio 6000 series radios. Simply connect the TRS and RCA connectors to the appropriate jacks on the back of the radio and you're ready to operate in voice modes. NOTE: If you want to use the FHM-3-TRSRCA with the Maestro you will need the FRI-MAE-C-ADAPTR Adapter kit.

Not Yet Reviewed

$69.99

Kenwood Mobile Microphones

Kenwood Mobile Microphones are original equipment models designed to provide excellent sound and handy operational features. From basic models with only up-down frequency adjustment buttons to sophisticated remote control mics with backlit keypads, Kenwood Mobile Microphones are available as upgrades or replacement for dozens of Kenwood transceivers. Order yours from DX Engineering today! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.

5.0 out of 5 stars ( 17 )

$83.99

Alinco EMS-98 Desktop Microphones

Alinco EMS-98 Desktop Microphones are dynamic microphones with a built-in preamplifier and adjustable mic gain using the mic gain control located on the bottom of the microphone. The EMS-98 features a PTT switch, a PTT lock switch as well as transceiver channel up/down keys. 3 different microphone cables are included making the EMS-98 compatible with the DR-735, DR-235, and DR-MD520 mobile transceivers. *Note - The EMS-98 is also compatible with the DR-138, DR438, CS10, and CS25 transceivers however, the Up/Down keys will not function properly

Not Yet Reviewed

$125.99

On Sale

INRAD Desk Microphone Systems

The INRAD Desk Microphone System combines their best Dynamic Microphones with their heavy DMS-1 PTT Desk Stand and a Transceiver Adapter Cable with coiled cord that connects from the back of the base to your transceiver mic jack. Easy! These are attractive and great sounding desk mics! The combination of dynamic microphone, locking push-to-talk desk stand with sound isolating mount, mic clip and adapter cable for popular radio brands, are complete and ready to plug in and operate. Choose systems for Icom, Yaesu, Kenwood, Elecraft, TenTec and Flex Radio. Simply choose the mic you prefer with the cable for your radio! To use the same microphone with a different transceiver brand, order and plug in a different accessory cable. It that easy! Choose from these five INRAD Desk Microphone System models: -INRAD DMS-629 Represents a revolution in price versus performance for Amateur Radio microphones. Highly unidirectional cardioid dynamic microphone features a large 1.125" diaphragm for clear, full audio response. This mic features excellent articulation with a rise in response to match the characteristics of speech for superior voice intelligibility. INRAD's top of the line microphone. -INRAD DMS-650 Well-articulated overall audio with overall higher-end output punch for DX operation and for using the speech processor on the radio to drive output. A top-of-the-line mic with less low end response than the M629. -INRAD DMS-686 Excellent transmit audio response from a unique cardioid dynamic element. Compared to the M629, the M686 has a slightly elevated higher end output useful for DXing. It has a bit of lower end response as compared to the M650, to retain a well-rounded sound with punch. Black metal frame, squared off metal microphone hood. The DMS-868 is a great choice to have it 'all-in-one'. -INRAD DMS-665 Features the "retro" chrome look reminiscent of the classic Shure 565. This microphone has a little bit less high frequency output plus slightly better overall frequency response. This unique cardioid dynamic unidirectional element features a built-in spherical breath and pop filter. Sounds great! -INRAD DMS-628 Flat overall response across all vocal frequencies without any boost at specific frequencies to cut lows or highs. Excels when used with an EQ, this is a good all-purpose mic that can be used with just about any HF transceiver. Clean, clear SSB transmit audio at a nice price! These INRAD Microphones and the 2.5 pound DMS-1 PTT locking base have received an enthusiastic review in the January 2018 issue of QST magazine. The review summary: "An excellent audio signal from a reasonably-priced, high-quality microphone." Want a different on-air sound from a different INRAD microphone? The M-series microphones are interchangeable. Unplug the 3 pin XLR cable from the back of the mic and pull it off the clip. Plug in the new mic, put it on the stand. It's that simple! Plus, optional adapter cables are available separately for trying other microphone and transceiver combinations. Enjoy quality transmit audio at a very reasonable price. Order your INRAD Desk Microphone System from DX Engineering!

4.78 out of 5 stars ( 23 )

$171.90

$144.30

—

$181.90

ICOM HM-133V Remote Control Microphones

ICOM HM-133V Remote Control Microphones are advanced TTP (touch tone pad) hand microphones that are supplied with many of the ICOM VHF/UHF transceivers. They support extensive remote operations of the radio, including VFO select, up/down tuning, and memory select, and they're backlit for low light conditions. These microphones plug into the RJ-45 modular jack on the transceiver.

5.0 out of 5 stars ( 1 )

$105.99

Heil PR 77D Microphones

Heil PR 77D Microphones are professional-quality dynamic mics for use in commercial broadcast, recording, podcasts—and any application that requires a smooth flat response over a wide frequency range, excellent transient response, great speech articulation and low IMD. These microphones are also great in Amateur Radio applications. Heil PR 77D Microphones achieve their exceptional performance with a large 1 in., low-mass voice coil encompassed by a powerful magnet structure using a mixture of neodymium, iron, and boron. Additionally, special attention has been paid to the phasing plug assembly to provide exceptional 180-degree, off-axis rear rejection of over 40 dB. Simultaneously, the front pattern allows the user to move about freely in front of the element with no change in response. Heil Sound PR 77D details: * Element Type: Dynamic * Output Connection: 3 pin XLR * Frequency Response: 60 Hz to 18 kHz (music-no filter); 120 Hz to 18 kHz (voice-filter on) * Polar Pattern: Cardioid * Impedance: 600 ohms nominal * Weight: 24.5 oz. * Max Sound Pressure Level (SPL): 146 dB * Output Level: -51 dB at 1 kHz * Rear Rejection: 40 dB at 180 degrees off axis (behind the mic) * Also available in Purple - model PR-77DP Heil PR 77D microphones feature a 2-position switch allowing the selection of the best characteristics for voice or music. The voice position rolls the audio off at 120 Hz at -6 dB per octave, while the music selection removes the filter—and the entire audio spectrum of 60 Hz to 18 kHz is present. They're designed to be used exclusively with booms, bases, or desk stands with the standard 5/8 – 27 microphone stand threads. A CC-1 XLR cable is required to interface with Amateur Radio rigs. If you're looking for a new studio-quality microphone for your band, or the ham bands, consider one of these fine Heil PR 77D Microphones from DX Engineering!

5.0 out of 5 stars ( 2 )

$249.00

ICOM Mobile Hand Microphones

ICOM Mobile Hand Microphones are standard PTT models with UP/DOWN buttons only, for those who want to use a simple microphone on their mobile. Advanced remote control keypad mics are supplied with many ICOM transceivers and are available as replacements. However, these are the bare-bones and basic mobile transceiver microphones without all of the bells and whistles. Order your simple, spare ICOM Mobile Hand Microphones from DX Engineering today!

4.43 out of 5 stars ( 7 )

$64.99

Heil PR 77DP Microphones

Heil PR 77DP Microphones are professional-quality dynamic mics for use in commercial broadcast, recording, podcasts—and any application that requires a smooth flat response over a wide frequency range, excellent transient response, great speech articulation and low IMD. These microphones are also great in Amateur Radio applications. Heil PR 77DP Microphones achieve their exceptional performance with a large 1 in., low-mass voice coil encompassed by a powerful magnet structure using a mixture of neodymium, iron, and boron. Additionally, special attention has been paid to the phasing plug assembly.to provide exceptional 180-degree, off-axis rear rejection of over 40 dB. Simultaneously, the front pattern allows the user to move about freely in front of the element with no change in response. Heil Sound PR 77DP details: * Element Type: Dynamic * Output Connection: 3 pin XLR * Frequency Response: 60 Hz to 18 kHz (music-no filter); 120 Hz to 18 kHz (voice-filter on) * Polar Pattern: Cardioid * Impedance: 600 ohms nominal * Weight: 24.5 oz. * Max Sound Pressure Level (SPL): 146 dB * Output Level: -51 dB at 1 kHz * Rear Rejection: 40 dB at 180 degrees off axis (behind the mic) * Also available in Black - model PR-77D Heil PR 77DP microphones feature a 2-position switch allowing the selection of the best characteristics for voice or music. The voice position rolls the audio off at 120 Hz at -6 dB per octave, while the music selection removes the filter and the entire audio spectrum of 60 Hz to 18 kHz is present. They're designed to be used exclusively with booms, bases, or desk stands with the standard 5/8 – 27 microphone stand threads. A CC-1 XLR cable is required to interface with Amateur Radio rigs. If you're looking for a new studio-quality microphone for your band, or the ham bands, consider one of these fine Heil PR 77DP Microphones from DX Engineering!

Not Yet Reviewed

$249.00

ICOM Desktop Microphones

ICOM SM-26 Desktop Microphones are new affordable ICOM desktop units for the Amateur Radio and Land Mobile Radio markets. SM-26 microphones come with an 8-pin modular-connector equipped cable and are compatible with many ICOM VHF/UHF mobile radios and repeaters. ICOM SM-26 Desk Microphone features: * 8-pin modular connector for direct connection to ICOM Radio Amateur or professional Land Mobile Radio (LMR) VHF/UHF mobile/base radios and repeaters * Unidirectional dynamic element * Built-in preamp * Microphone gain control * PTT and Monitor switches, with Monitor-Lock switch * Large switches for convenient operation * Strong, durable construction * Slim dimensions (2.64 x 6.69 x 6.57 in.) * Requires radio-supplied power ICOM SM-26 Desktop Microphones offer the right combination of advanced features and outstanding product value! Look to DX Engineering to have the audio accessories you need!

4.0 out of 5 stars ( 1 )

$149.99