Availability
Network Analyzers
Chelegance SV6301A VNA Handheld Vector Network Analyzers
Chelegance SV6301A VNA Handheld Vector Network Analyzers are complex and useful tools to have in the shack toolbox. They are not only well suited for testing and analyzing antennas, but they are also used to measure filters, amplifiers, attenuators, cables, power dividers, couplers, duplexers and other RF components. The versatile SV6301A features a wide frequency range of 1 MHz to 6.3 GHz and can perform measurements on a variety of antennas in the MF/HF/VHF/UHF and SHF bands as well as shortwave, ISM band, WiFi, Bluetooth and GPS antennas.
( 1 )
$1,464.99
Chelegance NANOVNA-F V2 3 GHz Mini Vector Network Analyzer
Chelegance NANOVNA-F V2 3 GHz Mini Vector Network Analyzer is a new generation of portable, stand-alone VNA, featuring a 4.3 inch IPS LCD screen, metal enclosure, 5000 mAh battery and SMA connectors. It is a product based on edy555's NanoVNA and OwOComm's S-A-A-V2. The measurement frequency range of NanoVNA-F V2 is up to 3GHz. The S21 dynamic range is greater than 70dB at 50kHz-1.5GHz and greater than 60dB at 1.5GHz – 3GHz. NanoVNA-F V2 can function up to a continuous 7 hours due to its large capacity battery and low-power design. Specifications: -Frequency range: 50 kHz - 3GHz -S11 dynamic range: 50dB (50 kHz - 1.5 GHz), 40dB (1.5 GHz – 3 GHz) -S21 dynamic range: 70dB (50 kHz - 1.5 GHz), 60dB (1.5 GHz - 3 GHz) -RF output power: -9dBm -Frequency tolerance: 0.5ppm -Screen: 4.3 in. IPS LCD, 800x480 pixel, RTP touchpad -Operation via touch screen or 3 side buttons -Battery: 3.7V Li-Po, 5000mAh -Enclosure type: Aluminum -Enclosure Dimensions (WHD): 4.921 x 2.953 x 0.787 in. (125mm x 75mm x 20mm) -RF port connector: SMA female -Sweep points: 101 -Calibration result storage: 5 -Calibration result interpolating supported -Traces: 4 -Markers: 4 -Measures: S-parameter, VSWR, smith chart, phase, polar, etc. -Mark table can be moved up and down -Firmware upgrade via U-disk with type-c cable -USB power output: 5V/1A -Compatible with NanoVNA-saver, support screenshot Parts Included: -NanoVNA-F V2 x1 -20cm SMA-JJ RG405 cable x2 -Calibration kit: SMA OPEN/SHORT/50 ohm LOAD -SMA-KK adapter x1 -SMA-JJ adapter x1 -SMA-JKW adapter x1 -USB Type-C cable x1 -Stylus x1 Supporting Resources: -User Manual & Quick Starter Guide -[LATEST]NanoVNA-F V2 Portable Vector Network Analyzer User Guide V2.0.pdf (https://chelegance.com/wp-content/uploads/2021/10/CHELEGANCE_NanoVNA-F-V2-Portable-Vector-Network-Analyzer-User-Guide-V2.0..pdf) -[LATEST]NanoVNA-F V2 Quick Start Guide – for firmware v0.3.0.pdf (https://groups.io/g/nanovna-f-v2/files/NanoVNA-F%20V2%20Quick%20Start%20Guide%20-%20for%20firmware%20v0.3.0.pdf) Firmware: -[LATEST]NanoVNA-F_V2_App_v0.3.0.zip (https://groups.io/g/nanovna-f-v2/files/Firmware/NanoVNA-F_V2_App_v0.3.0.zip) -Download previous versions here (https://groups.io/g/nanovna-f-v2/files/Firmware) Desktop Software: -[LATEST]NanoVNA-Saver-0.3.8 (https://chelegance.com/wp-content/uploads/2021/10/Nanovna-Saver-0.3.8.exe) Note: If the current firmware version of your NanoVNA-F V2 device is lower than v0.2.0, please upgrade to v0.2.0 first, and then upgrade to v0.3.0. The new firmware v0.3.0 has the following features: 1. Menu style optimization; New menu UI style; New keyboard UI style: bigger buttons for avoiding typing error; Change the ordinate to 10 grids; 2. Optimized menu structure for more convenient operation; 3. Improved the measurement noise of high frequency; 4. Allow the reference position to be set to negative value; 5. Fixed known bugs.
( 6 )
$262.99
WiMo miniVNA PRO2 Wireless Vector Network Analyzer
WiMo miniVNA PRO2 Wireless Vector Network Analyzer (sold as part number WMO-MINIVNAPROBT) is the updated PC-based VNA that is used for analyzing antennas, RF devices and circuits across the 10 kHz to 230 MHz range at an impedance range of 1 to 1000 ohms. This version features a built-in rechargeable battery, a wireless Bluetooth interface, and the latest circuitry and firmware available. These enhancements allow the miniVNA PRO2 to be used directly at the feedpoint of an antenna for the most accurate measurements. Pair this unit with a Windows, Mac, or Linux PC with downloaded software from miniradiosolutions.com and vnaj.dl2sba.com. For your Android device, get the Blue VNA app from Google Play Store. Here are all the features and specs of the WiMo miniVNA PRO2: - Vector network analyzer, Two Port, 100 kHz-200 MHz (10 kHz-230MHz)/S11 port (S21 port) - NFC application, antenna analysis, duplexer, filters, PCB tuning, etc. - I/Q DDS 2 Channel Generator with AD9958 by Analog Devices. 1 Hz step - 100 dB dynamic range S21 - Bluetooth connection - USB or battery operation (1000 mAh) - Two separate buffered RF output I/Q for SDR experiment and IMD test with independent 0-55 dB attenuator. (0dBm) - Generator phase adjustment with resolution of 1 degree step - Accessory port for future optional interfaces - SMA connectors for better isolation - Calibration using open-short-load for accurate results - Measurements of motional crystal parameters 1 Hz generator steps - Integrated Smith chart in software - Display and save results; Export data in several formats like JPEG, EXCEL, ZPLOT, S2P, PDF; Boot loader for future firmware upgrades - User-friendly interface for PC Windows, Linux and Mac -- https://vnaj.dl2sba.com/ - Android app Blue VNA for management via Smartphone or Tablet NOTE: Images depict various models. Applications are accurate.
Not Yet Reviewed
$509.99
Chelegance SV4401A Handheld Vector Network Analyzers
Chelegance SV4401A Handheld Vector Network Analyzers exhibit a host of features and capabilities including measuring and analyzing antenna or coax parameters such as SWR, impedance and loss and antenna phase. The list of impressive features does not stop there, the SV4401A can also characterize and tune filters, test amplifiers, attenuators, cables, couplers, duplexers and much more! The SV4401A supports a variety of display formats including log Mag, Linear Mag, Phase, Smith R+jX, Smith R+L/C, VSWR, Polar, Group delay, Resistance, Reactance and the Time Domain, Reflector (TDR) function is useful for making cable length measurements and cable break-point testing. The SV4401A covers the 50 kHz-4.4 GHz range and features a built-in 1001 maximum data points and coupled with a low-noise, 100db dynamic range allows you to visualize precise and detailed RF circuit analysis.
( 1 )
$654.99
Chelegance JNCRadio VNA 3G Portable Vector Network Analyzer
Chelegance JNCRadio VNA 3G Portable Vector Network Analyzer offers a wide frequency coverage of 50 kHz through 3 GHz, with an improved sweep speed of 400 points/sec; four times faster than the NanoVNA-F V2. It features a 4.3 in. IPS touch screen and a 5000mA rechargeable internal battery in a metal case with SMA connectors. The unit is used for measuring SWR, impedance, reactance, phase, delay, and Q factor of RF circuits, filters, duplexers, amplifier strip lines, cables and antennas, and many other applications. It displays in linear, polar and Smith Chart plots. Features of the VNA 3G Portable Vector Network Analyzer: * CE, FCC and RoHS compliance * Frequency range: 50k – 3GHz * Dynamic range: 70dB for S21, 50dB for S11 * Sweep speed: 400 pts/sec * Sweep points: up to 501 * 4.3 in. IPS LCD, ultra-wide viewing angle * All-aluminum alloy case: 5.118 x 2.953 x 0.866 in. (130 x 75 x 22mm), small and portable * SMA RF connectors, easy-to-connect DUTs * Built-in 3.7V 5000 mAh battery, standby time up to 5 hours * Full touch screen design, with 3 side buttons at the same time * TDR function * Built-in simple RF signal generator: up to 4.4GHz, output power adjustable * Support touchstone file save and export, and files are named with RTC time * More than 10 calibration save/recall slots * Optimized UI design, make measurement convenient and efficiency * Screen brightness adjustable * Firmware upgrade via virtual U disk with USB Type-C cable * Equipped with high-quality SMA calibration kit and RG405 cable * 5V/1A USB power output port * Charging via USB Type-C, maximum charging current reaches 2A * Compatible with NanoVNA-Saver PC software SPECIFICATIONS: Parameter: Specification: Conditions: Frequency range 50kHz~3GHz RF output power -10dBm 50kHz – 140MHz -9dBm 140MHz – 1GHz -12dBm 1GHz – 2GHz -14dBm 2GHz – 3GHz Frequency accuracy <±0.5ppm S21 dynamic range 80dB 50kHz – 1.5GHz 70dB 1.5GHz – 3GHz S11 dynamic range 50dB 50kHz – 1.5GHz 40dB 1.5GHz – 3GHz Sweep points 501 11-501 configurable Traces 4 Markers 4 Calibration storage >10 Sweep speed 400 pts/s Display 4.3-inch IPS LCD Resolution: 800*480 Touch screen RTP Battery 3.7V 5000mAh Charging/Data port USB Type-C Charging voltage 4.7V – 5.5V Power output USB-A 5V/1A RF connector SMA Dimensions 130*75*22mm Shell material Aluminum alloy Operation temperature 0℃-45℃ * PARTS LIST: - JNCRadio VNA 3G x1 - 20cm SMA-JJ RG316 cable x2 - Calibration kit: SMA OPEN/SHORT/50 ohm LOAD - SMA-KK adapter x1 - SMA-JJ adapter x1 - SMA-JKW adapter x1 - USB Type-C cable x1 - Stylus x1 RESOURCES: * DATASHEET: https://chelegance.com/wp-content/uploads/2021/12/DATASHEET_Chelegance-VNA-3G-Specifications.pdf * USERMANUAL: https://chelegance.com/wp-content/uploads/2021/12/JNCRadio-VNA-3G-Portable-Vector-Network-Analyzer-User-Manual-V1.0_0.1.pdf * FIRMWARE: [1/22]vnaApp.bin https://chelegance.com/wp-content/uploads/2021/12/vnaApp.bin * DESKTOP SOFTWARE: [1/22]NanoVNA-Saver-0.3.8 https://chelegance.com/wp-content/uploads/2021/10/Nanovna-Saver-0.3.8.exe
( 2 )
$371.99
WiMo miniVNA Tiny Vector Network Analyzer
WiMo miniVNA Tiny Vector Network Analyzer is a hand-held PC-based VNA with a multitude of features and capabilities. This is the world's first analyzer with the extreme range of up to 3 GHz. This unit and your PC, laptop, or Android device are the perfect combination for checking antennas and RF circuits for ham and commercial users, from HF to SHF. MiniVNA Tiny Specifications: – Frequency range from 1MHz to 3GHz – Frequency step of 10Hz – Range of Z from 1 to 1000 ohm – RF Generator power output of -6dBm @ 500 MHz – Dynamic range of up to 70 dB @ 500 MHz – Supply is powered from USB MiniVNA Tiny Features: – SMA connectors for better isolation – Calibration using open-short-load for accurate results – Two ports VNA with S11 and S21; displayed and save results – Full Phase measurement – Export data in several formats JPEG, EXCEL, ZPLOT, S2P and PDF – Boot loader for future firmware upgrades – User-friendly interface for PC Windows Linux and Mac – Integrated Smith chart in software – Android Mobile Phone software free
Not Yet Reviewed
$599.99