Availability
Remote Interfaces and Band Controllers
Yaesu SCU-LAN10 Network Remote Control System
Yaesu SCU-LAN10 Network Remote Control System brings the advanced functionality of Ethernet LAN port direct remote control to the unparalleled FTDX-101D and FTDX-101MP Transceivers and the impressive, compact and affordable FTDX10 Transceiver. All of the excitement of these phenomenal radios is available to any PC, on your local network or via the Internet from anywhere in the world, with the SCU-LAN10 interface units connected to the transceiver and a local network or the Internet. SCU-LAN10 Network Remote Control Software is available for download from www.yaesu.com Also available from the same link is the required Firmware Update versions listed here for the FTdx-101 series transceiver to be used with the SCU-LAN10 Interface: - MAIN: V01-14 - DISPLAY: V01-06 - IF DSP: V01-05 - SDR: V02-03 To confirm the firmware version on your FTdx-101 series transceiver, press [FUNC] key, touch [EXTENSION SETTING] and then select [Soft Version]. The software version will be displayed. All FTDX10 versions are supported. Each SCU-10LAN unit includes a special 13-pin DIN interface cable, a USB cable and two snap-on ferrite RFI suppressors. Specifications: Supply Voltage: 13.8 VDC Nominal Operating Voltage: 9 VDC to 15.2 VDC Current Consumption: 800 mA (max) Operating Temp Range: +32F-122F (0C to 50C) Dimensions: (WHD) 4.37 x 1.24 x 5.31 in. (111 x 31.5 x 135 mm) Weight: 0.93 lbs. (420g) NOTE: * A wired LAN port Ethernet router connection is required. Wi-Fi is not supported. * When using the internet, a fixed global IP address or fixed domain name is required for the network where the remote controlled radio is installed. Equip your Yaesu FTDX-101MP, FTDX-101D or FTDX10 transceiver for Internet LAN remote control operations with the Yaesu SCU-LAN10 Network Remote Control interface unit from DX Engineering.
( 5 )
$447.99
ACOM eBox Ethernet Remote Control Devices
ACOM eBox Ethernet Remote Control Devices directly integrate ACOM power amplifiers to Ethernet networks for Internet Remote operations. ACOM eBox is specifically designed for use only on ACOM power amplifiers. DX Engineering sells the two versions available, sold with different interface cables: * AOM-EBOX-SS for ACOM 600S, ACOM 700S and ACOM 1200S * AOM-EBOX-2000 for ACOM 2000A with RCU The eBox receives the amplifier's specific commands via Ethernet interface and forwards them to the ACOM amplifier. EASY to OPERATE There is no software to install! The administration of the eBox is done via Web-based programming interface specially developed for ACOM amplifiers. You can use any personal computer running any operating system. You just need to run web browser as Chrome, Opera, Firefox, MS Edge, Safari, etc. ALWAYS UP-TO-DATE Your eBox is always up-to-date due to its integrated function for firmware update. The newest firmware versions are available (usually as *.bin files) at www.acom-bg.com. With just a few clicks you can upload a new firmware to the eBox. ACOM eBox SPECIFICATIONS: * Remote control capabilities via Ethernet * Suitable for use with ACOM 600S, 700S, 1200S and 2000A Power Amplifiers * Web browser-based user-friendly interface NOTE: Included universal 100-240 VAC wall mount power supply with European plug is adapted to North American plug with DMV-EURO-US-PLUG, included in eBox combination models ending in -P.
( 7 )
$749.99
—
$757.98
Clearance
SureFire Radio MIC-7 Multi-Interface Controller
The SureFire Radio MIC-7 Multi-Interface Controller is a phenomenal tool with application features for nearly every Amateur Radio station. It is a complete band decoder, antenna switch controller and remote control gateway contained in a single, attractive package. It supports Icom, Kenwood, Yaesu, Elecraft and Flex radios. From another room or another continent, it provides Internet remote control and computer connections to control a transceiver, a bandpass filter, an antenna switch and more! Here are the major functions of the MIC-7 at a glance: - LCD Display of Frequency, Band, Antenna and Status - Internal Band Decoder - RS-232, CI-V and Band Data interfaces - Internal RS-232 and CI-V to USB interface - Bi-directional band data port - Dual port LAN Ethernet interface – Port A is for Internet control of the MIC-7, Port B is for the Radio Data Stream - Direct USB connection to Flex Radios - Two units may be interconnected for SO2R operation - Automatic antenna lockout for antennas in use by other radio - Completely configurable from front panel (Dual LAN port assignment by web browser) - Dimensions, WHD: 6.7 x 1.4 x 7.6 in. (170.2 x 35.6 x 193.4 mm) - Weight: 1.4 lbs. (0.64 kg) While accomplishing all available remote control functions, this remarkable device simultaneously converts either Icom CI-V to USB, or Yaesu RS-232 CAT to USB, or Kenwood and Elecraft RS-232 COM to USB. The radio band data port is bi-directional, providing conversion of information for virtually unlimited applications with accessories. The MIC-7's USB port may be connected to a USB equipped transceiver for remote rig control and it supports direct connection to modern FlexRadio transceivers. You can easily interface any modern, computer controllable transceiver to a PC desktop or laptop computer AND enjoy the additional functionality of this unit. The MIC-7 features a dual port LAN for remote Internet operations which can simultaneously serve a remote station transceiver as well as control the rear panel 8-contact switching control for antenna or other relay switching tasks, such as a third party bandpass filter. The rear panel RJ11 FireLAN port on both the MIC-7 and the SureFire Radio BF-100 Bandpass Filter System provides direct interface control and DC power. They were made for each other! Like the BF-100, the SureFire Radio MIC-7 is built into an attractive and sleek heavy duty anodized aluminum case with laser engraved panels and high quality connectors. With the MIC-7, a connected transceiver, an antenna switch and a bandpass filter may all be remotely operated via local or Internet LAN connection to your router. Use your station with any Internet access control PC operating generic or transceiver specific remote control software. Here is the link to IP configuration software to use the MIC-7 on a LAN: https://www.netburner.com/download/ip-setup/ Here is the link to drivers for those interested in using a virtual COM port assigned to an IP address and port: https://www.netburner.com/download/virtual-comm-port-driver-windows-xp-10/ Bring the ease of remote operations with radio, antenna switch and bandpass filter automation to your shack with the SureFire Radio MIC-7 Multi-Interface Controller, available exclusively from DX Engineering.
Not Yet Reviewed
$399.99
$279.99