Availability
Rotator Mounting and Replacement Parts
Yaesu 40M-WP Connector Kit for Yaesu Rotators
Yaesu 40M-WP Connector Kit for Yaesu Rotators includes the necessary connectors to repair or build a new Yaesu Rotator control cable for your rotator installation. The 6 pin Molex connector is for the control unit and the 7 pin round connector with a weatherproof cap is for the rotor. (Control cable not included) - Please CLICK or TAP on the title of a listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.
( 3 )
$59.99
Yaesu Mast Adjustment Plates
Yaesu Mast Adjustment Plates are shims to use along a mast that is smaller than the rotator upper mast clamp.
( 11 )
$24.99
Yaesu Rotator Absorber Joint Mounts
Yaesu Rotator Absorber Joint Mounts are used between Yaesu rotators and tower mounting shelves to provide a cushion to the shock of torque on large antenna rotation systems.
( 3 )
$149.99
—
$159.99
Yaesu G-5500 Series Rotator Replacement Mounting Hardware
The Yaesu Azimuth Rotators may be mounted at the top of the mast together with the elevation rotator, or separately inside a supporting tower. Mounting the Azimuth Rotators separately on the side of the mast requires additional hardware not supplied with the G-5500 Rotator kits. These YSU-S8003450 Pipe Clamps and YSU-S8002738A M8 X 115mm Stud Bolts (sold separately) are replacements for those originally supplied in the Yaesu Separation Kit. Refer to the installation instructions for the Yaesu G-5500 Series Rotators for more information.
Not Yet Reviewed
$2.19
—
$8.99
DX Engineering Replacement U-Bolt Kits
Do you need to replace a U-bolt on your rotator mast clamp? DX Engineering Replacement U-bolt Kits are ready and rugged to keep your mast fastened to your rotator unit. They are sold individually so if only one is needed, then only one can be purchased. Specifically designed for antenna mast usage, DX Engineering replacement U-bolt kits offer maximum surface contact to prevent slippage! This U-Bolt is made of durable stainless steel and we include replacement stainless steel washers and nuts to complete your project. Each Replacement U-Bolt Kit contains one (1) U-Bolt, two (2) split washers, two (2) flat washers and two (2) nuts. Replace lost or damaged rotator mast clamp U-bolts with new ones from DX Engineering.
( 6 )
$12.99
—
$16.49
DX Engineering Rotator Control Line Connectors
Available here, individually, are the "remarkable and elegant" 4-pin interlocking weather-sealed rotator control line connectors that have metal bodies to provide RF shielding, as supplied with the DXE-RT4500HD. These DX Engineering Rotator Control Line Connectors are top-of-the-line cable-mount solder connectors that are intended to be used outdoors, for a lifetime of reliable control line termination. Their positive latching, moisture-sealing, quick disconnect features make them ideal to build an extension, pigtail or test cable for your DXE-RT4500HD or controller. They are a perfect match for DX Engineering DXE-CW1812OR Heavy-Duty Spec Rotator Cable, with 5 conductors: 2 x 12 AWG and 2 x 18 AWG plus 1 x 18 AWG shield. Each gender are used to build your own rotator cable assembly extension. Just as with standard power extension cords, use female for the power source end and male for the mating end of the extension, so there is never an exposed pin with voltage present. In this case, use the DXE-LP-20-F female connector on any cable, controller pigtail or the rotator end of an extension that can have a voltage present. Use the DXE-LP-20-M male connector on the controller end of the mating extension cable. DXE-LP-20-F 4-pin female to make a controller pigtail or for the end of a cable assembly that mates with the male rotator pigtail. This connector is supplied with DXE-RT4500HD Heavy Duty Rotators DXE-LP-20-M 4-pin male as supplied on the permanently mounted DXE-RT4500HD Heavy Duty Rotator. Used for the controller end of an extension cable to mate with a controller pigtail. These are the best connectors, to make the best weather-sealed 4-conductor cable assembly, for the best rotator on the market, all from DX Engineering.
Not Yet Reviewed
$20.99
DX Engineering Tic Ring Wheel Replacement Kits
DX Engineering Tic Ring Wheel Replacement Kits are an amazing value, ready to breathe new life into your Tic Ring Rotator assembly. Over time, the wheels (rollers) on a typical Tic Ring need to be replaced as part of routine maintenance. The DXE-TRWHEEL kit supplies all of the wheels, flat washers and cotter pins needed for either application. DX Engineering DXE-TR-WHEEL kits include two sizes of high-quality MDS filled cast nylon rollers that fit most Tic Rings in use today. Not all Tic Rings are identical and there are many variations. Some use 6 wheels that are all the same size. Some use a combination of four small wheels (0.397" ID) and two larger wheels (0.640" ID). Replacing the wheels on the Tic Ring one at a time is easy. 1. Remove the existing cotter pin and discard it. 2. Remove the old wheel from the roller shaft and discard it. 3. Clean any contamination from the roller shaft 4. Install the new wheel over the wheel shaft. 5. Install the proper flat washer. 6. Install the cotter pin. 7. Bend the legs on the cotter pin to keep the assembly in place. 8. Move to the next wheel and repeat the sequence.
Not Yet Reviewed
$89.99
DX Engineering RT4500HD Heavy Duty Rotator Replacement Parts
The DX Engineering RT4500HD Heavy-Duty Rotator is the ultimate azimuth positioning rotator, purpose-built to work flawlessly for many years in a vast majority of tower-mounted directional antenna systems. Every aspect of this rotator was specifically designed for high-strength, ease of installation, serviceability and longevity. An access panel allows for servicing of the pulse counter switch without removing the rotator from the tower for ease of maintenance. The RT4500HD is THE rotator of choice for any radio enthusiast who desires an extremely capable and worry-free unit for their tower mast-mounted directional antennas. When the need arises for replacement parts, look no further than DX Engineering for genuine replacement parts. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 1 )
$31.99
—
$114.99
DX Engineering TIC-GEN Replacement Potentiometers
One of the problems you may have with TIC Ringrotors is failure of the position potentiometer due to outdoor exposure. DX Engineering has your solution! Our part number DXE-TICGEN-POT Replacement Potentiometer is fully weather sealed to help eliminate those inconvenient trips up the tower. These replacement 500 ohm, 10-turn, pots will work in your Model 1022 and 1032 Series rotators, replacing the original pots with a higher-quality unit. Why worry about a failure in February? Replace the original pot with our DXE-TICGEN-POT Replacement Potentiometer, now available from DX Engineering.
( 1 )
$26.99
DX Engineering Rotator Top HD Mast Clamp Mounting Hardware
DX Engineering Rotator Top HD Mast Clamp Mounting Hardware is available here as replacements for hardware provided with the DXE-RTMC series Rotator Top HD Mast Clamps for attachment to applicable rotators: - DXE-RTMC-MTG-HWK mounts 2 inch DXE-RTMC-2 and 3 inch DXE-RTMC-3 top mast clamps onto DXE-RT4500HD and M2 OR2800 Rotators. Includes stainless steel bolts, washers and single-use Nylon lock nuts. This kit must be ordered as a replacement for reinstallations. - DXE-RTMC-YSU-HWK only for the DXE-RTMC-2 that fits on Yaesu G-2800DXA, G-1000DXA and G-800DXA. Bolts and washers. Also available as replacements for K7NV Mast Clamps. This is stainless steel mounting hardware only. They work on both Rotator Top HD Mast Clamps, sold separately in two different sizes, DXE-RTMC-2 for 2 inch OD* mast and DXE-RTMC-3 for 3 inch OD mast. *OD=Outside Diameter NOTE: Only the 2 inch HD Mast Clamp DXE-RTMC-2 works as a replacement for a Yaesu top mast clamp, NOT the 3 inch DXE-RTMC-3.
Not Yet Reviewed
$13.59
—
$16.59
WiMo Aluminum Tripod Rotator Mounting Plates
WiMo Aluminum Tripod Rotator Mounting Plates allow you to upgrade a WiMo aluminum Mast Tripod with these new and innovative Tripod Rotator Mounting Plates, designed to make it possible to mount rotators such as the G-450CDC, G-1000DXC, or G-2800DXC for portable or semi-permanent operation. Take your WiMo Mast Tripod to a new level with these advanced WiMo Aluminum Tripod Rotator Mounting Plates, designed to enhance your setup with superior functionality and durability.
( 1 )
$249.99
DX Engineering Replacement Clamping Hardware for Mast Clamp
DX Engineering Replacement Clamping Hardware for Mast Clamp is available in two size specific versions: - DXE-RTMC-2A-HWK for the DXE-RTMC-2A Rotator Top HD 2 Inch Mast Clamps - DXE-RTMC-3A-HWK for the DXE-RTMC-3A Rotator Top HD 3 Inch Mast Clamps Each kit includes the appropriate stainless steel bolts, washers and single-use Nylon lock nuts. These kits are to be ordered as replacements for reuse and reinstallation of Mast Clamps because Nylon lock nuts are not recommended to be reused. NOTE: These replacement hardware kits are used for the clamping action, NOT for mounting, of Rotator Top HD Mast Clamps.
Not Yet Reviewed
$9.99
—
$10.49
DX Engineering Secure Mount Bolt Kits
DX Engineering Secure Mount Bolt Kits are special stainless steel hex bolts with a coating on the threads that keeps them in place! Available in either 1/4-20 or 5/16-18, these bolt kits are provided to fit to popular HAM series and Tailtwister rotators, used by hams around the world. Perfect for use on new installations and as replacements, these "patch bolts" stay where they are placed and will not back out under vibration, which can be a problem with standard bolts. Depending upon model, Secure Mount Bolt Kits include five or six sets stainless steel bolts, flat washers and split washers. Secure your rotator with DX Engineering Secure Mount Bolt Kits.
Not Yet Reviewed
$11.99
—
$15.99
DX Engineering Rotator Mounting Replacement Hardware Kits
DX Engineering Rotator Mounting Replacement Hardware Kits are the same mounting hardware kits included with the DXE-RT4500HD Heavy Duty Rotator. These kits include four 5/16-18 x 3/4 in. 18-8 stainless steel patch bolts, which are the type that have thread-locking compound infused into the threads of the bolts. Stainless steel flat washers are included.
Not Yet Reviewed
$9.99