Availability
Tower Mast Thrust Bearings
DX Engineering TB300 Advanced Design Thrust Bearings
DX Engineering TB300 Advanced Design Thrust Bearings offer a major advance in mechanics that solve the issues with competing tower mast bearings that wear out too quickly They are specifically designed for a vertically mounted 1.5 to 2.0 inch OD tower mast installed for the efficient rotation of directional HF, VHF, UHF and SHF antennas. Introduced in early 2021, the upgraded DX Engineering TB300 features high quality stainless steel ball bearings and stainless steel races that keep the bearings very clean. Compared with ANY OTHER thrust bearings, our TB300 thrust bearings are firm and strong with an ultra-low rotation resistance that has to be seen to be believed. These heavy-duty bearing assemblies are cast from high-strength zinc-aluminum alloy, precision machined and assembled to last for the life of the tower installation. DX Engineering Thrust Bearings are 7 in. diameter overall and mate with tower bearing plates and accessory plates for ROHN or Amerite towers. DX Engineering TB300 thrust bearings mount directly to: -DXE-AS455G DX Engineering Accessory Shelf for inside of ROHN 45G and 55G and Amerite 45 & 55 -Pre-drilled "Flat-Top" Tower Section models ROHN 25AG4 ROHN 45AG4 -Top Bearing Plate models ROHN BPL25G on top of a straight 25G tower section ROHN BPL45G on top of a straight 45G tower section ROHN BPL55G on top of a straight 55G tower section -Tower Top Bearing Plate with Accessory Shelf ROHN BAS25G for top of a straight 25G Tower Sections (may be used on the top of combination model). They may also be used on any Amerite Tower and accessory that corresponds to the ROHN part numbers listed above, including tower-top bearing shelves for AME-25, 45 and 55 series towers. NOTE: Accessory Shelf models that fit inside of ROHN or Amerite 25G do not accommodate DX Engineering Thrust Bearings. These bearings are intended only for top mount on flat top 25G tower. The DXE-TB300 Thrust Bearing, for up to 2 in. OD mast, is supplied complete with hardware. The three stainless steel mast capturing and centering hex head bolts are 3/8-16 x 1-1/2 in. long with stainless steel hex nuts. The mounting hardware, four (4) structural mounting bolts are 1/2-13 x 1-1/4 inch long, and the mounting hex nuts and washers are all galvanized. The TB300 accommodates a mast size range of 1.500 to 2.000 in. OD. Designed and built for vastly improved longevity, our thrust bearings reduce the load on your rotator motor more efficiently than the old standard version. Order DX Engineering TB300 Advanced Design Thrust Bearings for your tower project with 2 inch OD mast.
( 20 )
$265.99
Yaesu Rotator Mast Bearings
Yaesu Rotator Mast Bearings are used to secure rotating mast that is used for directional antennas. These are also known as thrust bearings, because they maintain smooth and steady rotation even when a large lateral thrust of the wind is pushing on the antenna and the mast. These Yaesu bearings stabilize and secure your antenna mast.
( 16 )
$84.99
—
$159.95
DX Engineering TB400 Advanced Design Thrust Bearings
DX Engineering TB-400 Advanced Design Thrust Bearings offer a major advance in mechanics that solve the issues with competing tower mast bearings that wear out too quickly. They are specifically designed for a vertically mounted 2.5 to 3.0 inch OD tower mast installed for the efficient rotation of directional HF, VHF, UHF and SHF antennas. Introduced in early 2022, the upgraded DX Engineering TB400 features high quality stainless steel ball bearings and stainless steel races that keep the bearings very clean. Compared with ANY OTHER thrust bearings, our TB400 thrust bearings are firm and strong with an ultra-low rotation resistance that has to be seen to be believed. These heavy-duty bearing assemblies are cast from high-strength zinc-aluminum alloy, precision machined and assembled to last for the life of the tower installation. DX Engineering Thrust Bearings are 7 in. diameter overall and mate with tower bearing plates for ROHN or Amerite towers. DX Engineering thrust bearings mount directly to the pre-drilled "Flat-Top" Tower Section models 25AG4 45AG4, as well as on Bearing Plate models BPL25G, BPL45G, or BPL55G which may be added to straight 25G, 45G or 55G Tower Sections, respectively. They may be used on the combination model BAS25G Bearing Accessory Shelf for straight 25G Tower Sections. They may also be used on any Amerite Tower and accessory that corresponds to the ROHN part numbers listed above, including tower-top bearing shelves for AME-25, 45 and 55 series towers. NOTE: Accessory Shelf models that fit inside of ROHN or Amerite 25G do not accommodate DX Engineering Thrust Bearings. These bearings are intended only for top mount on flat top 25G tower. The DXE-TB400 3 inch Thrust Bearing includes mounting hardware Patch Bolts (4) are 1/2-13 x 1-1/4 inch long. Patch Bolts have a yellow thread lock compound (one time use) on the threads to help ensure the bolts stay tight once installed. If removed, another thread lock compound will be needed prior to re-installation. The three stainless steel mast capturing and centering hex head bolts are 3/8-16 x 1-1/2 in. long with stainless steel hex nuts. The TB400 accommodates a mast size range of 2.500 to 3.000 in. OD. Designed and built for greatly improved longevity, our thrust bearings reduce the load on your rotator motor more efficiently than the old standard version. Order DX Engineering Advanced Design Thrust Bearings… today!
( 1 )
$321.99