Availability
Transceiver Remote Meters
VE2DX Electronics IM1-4BTPLUS V2 Icom Digital Meter and TrueCIV Interface
VE2DX Electronics IM1-4BTPLUS V2 Icom Digital Meter and TrueCIV Interface is high-quality 2-Inch Meter Display and TrueCIV version 2 Data Hub for most Icom transceivers. This unique mini-screen device can show two bar graph meters or two needle meter displays, as selected with two front panel buttons, as well as other transceiver status indicators. This specially programmed VE2DX Electronics Design Inc. ICOM METERS ESP32 device ingeniously samples Icom transceiver CI-V data to display available information in multiple formats, depending upon radio model. This IM1-4BTPLUS V2 meter includes a CT17B-MICRO v2 internal 3 port hub with VE2DX Electronics Design Inc. TrueCIV, a new CI-V TTL standard that is unparalleled for RFI resistance. Multiple accessory items can be simultaneously served the interfaced transceiver's CI-V data stream via this internal 3-port hub. It supports a many types of Icom CI-V reading station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. This device is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its three TrueCIV ports and single USB port. Powered via the USB C port, this unit interfaces to over 20 different ICOM radios using any one of these methods to connect: CI-V via Standard CI-V 3.5mm Remote port cable, Bluetooth CI-V or USBoIP using UDP and is powered via the USB C port. Another important feature of the VE2DX Electronics Design is the programmable alarm any time your SWR goes over 3:1. Finally, integrated magnets in the back and bottom of the VE2DX Electronics ICOM METERS IM1-4BTPLUS V2 simplifies installation on your portable equipment or in your shack. NOTE: VE2DX Electronics IM1 Meter devices are not transceiver screen adapters and do not display a bandscope. This meter display unit frees up the main display of the 7300, 9700 and 705 for bandscope operations.
( 7 )
$174.99
LDG Electronics Dual Analog Color Meter for IC-7610 Transceivers
LDG Electronics Dual Analog Color Meters for Transceivers provide two 3.5 in. external meters for specific high-grade transceiver models. They display S-meter on receive, power out, PA current, SWR, ALC level, compression, supply voltages and more—dependent upon the transceiver model. What's more, these multi-function meters and the virtual meter on your radio work simultaneously. Each meter is individually backlit by an adjustable color LED, powered by any 12 Vdc, 500ma source. The color and brightness controls are on the back panel. LDG Electronics Meters are fully assembled and calibrated, and both the radio and power cables are included, so you're ready to go right out of the box! LDG Electronics Dual Analog Color Meters feature: * Dual 3.5 in. analog meters * Displays: S-Meter, RF power, SWR, etc. * Color/Brightness: Rear panel adjustment for each meter * Voltage: 13.8 V DC +/-15% * Current draw: 500 mA max * Dimensions (WHD) 8.0 x 4.0 x 4.0 in. (200 x 100 x 100mm) * Weight: 1.5 lbs., 680 g.
( 4 )
$199.99
VE2DX Electronics IM1-HDMI V2 Icom Digital Meter HDMI Display and TrueCIV Data Interface
VE2DX Electronics IM1-HDMI V2 Icom Digital Meter HDMI Display and TrueCIV Data Interface is a small electronic device with Bluetooth, USB and CI-V ports to interface an Icom transceiver as well as connect any size HDMI flat panel monitor or TV. This unique Icom radio HDMI Meter Display unit can be configured to show two bar graph or two needle meters as well as other transceiver status indicators. This specially programmed VE2DX Electronics Design Inc. ESP32 device ingeniously samples the Icom transceiver CI-V data to display available meter and status information in multiple formats, depending upon radio model. This exciting device also includes a custom VE2DX Electronics CT17B-Nano version 2 internal 2 port hub with TrueCIV, which creates a new CI-V TTL standard that is unparalleled for RFI resistance. Multiple accessory items can be simultaneously served the interfaced transceiver's CI-V data stream supporting many types of Icom CI-V reading station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. Powered via the USB C port, this unit interfaces to over 20 different ICOM radios using any one of three methods to connect: CI-V via standard 3.5mm Remote port cable, Bluetooth CI-V or USBoIP using UDP. This unit provides an electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its two TrueCIV ports and single USB port. Another important feature of the VE2DX Electronics Design ICOM HDMI METER IM1-HDMIV2 is the programmable alarm any time your SWR goes over 3:1. Finally, integrated magnets in the back and bottom of the IM1-HDMIV2 simplifies installation on your portable equipment or in your shack. NOTE: VE2DX Electronics IM1 Meter devices are not transceiver screen adapters and do not display a bandscope. This meter display unit frees the main display of the 7300, 9700 and 705 for bandscope operations
( 1 )
$146.99
LDG Electronics Dual Analog Color Meter for FTDX-101 Transceivers
LDG Electronics Dual Analog Color Meters for Transceivers provide two 3.5 in. external meters for specific high-grade transceiver models. They display S-meter on receive, power out, PA current, SWR, ALC level, compression, supply voltages and more—dependent upon the transceiver model. What's more, these multi-function meters and the virtual meter on your radio work simultaneously. Each meter is individually backlit by an adjustable color LED, powered by any 12 Vdc, 500ma source. The color and brightness controls are on the back panel. LDG Electronics Meters are fully assembled and calibrated, and both the radio and power cables are included, so you're ready to go right out of the box! LDG Electronics Dual Analog Color Meters feature: * Dual 3.5 in. analog meters * Displays: S-Meter, RF power, SWR, etc. * Color/Brightness: Rear panel adjustment for each meter * Voltage: 13.8 V DC +/-15% * Current Draw: 500 mA max * Dimensions (WHD) 8.0 x 4.0 x 4.0 in. (200 x 100 x 100 mm) * Weight: 1.5 lbs., 680 g.
( 1 )
$199.99
LDG Electronics Dual Analog Color Meter for TS-990 Transceivers
LDG Electronics Dual Analog Color Meters for Transceivers provide two 3.5 in. external meters for specific high-grade transceiver models. They display S-meter on receive, power out, PA current, SWR, ALC level, compression, supply voltages and more—dependent upon the transceiver model. What's more, these multi-function meters and the virtual meter on your radio work simultaneously Each meter is individually backlit by an adjustable color LED, powered by any 12 Vdc, 500ma source. The color and brightness controls are on the back panel. LDG Electronics Meters are fully assembled and calibrated, and both the radio and power cables are included, so you're ready to go right out of the box! LDG Electronics Dual Analog Color Meters feature: * Dual 3.5 in. analog meters * Displays: S-Meter, RF power, SWR, etc. * Color/Brightness: Rear panel adjustment for each meter * Voltage: 13.8 V DC +/-15% * Current draw: 500 mA max * Dimensions (WHD) 8.0 x 4.0 x 4.0 in. (200 x 100 x 100mm) * Weight: 1.5 lbs., 680 g.
( 3 )
$199.99
VE2DX Electronics IM1-4BTTUFFV2 ICOM TUFF METERS Digital Display and TrueCIV Interface
VE2DX Electronics IM1-4BTTUFFV2 ICOM TUFF METERS Digital Display and TrueCIV Interface is high-quality portable 2-Inch Meter Display and TrueCIV version 2 Data Hub for most Icom transceivers. This unique waterproof mini-screen device can show two bar graph meters or two needle meter displays, as selected with two front panel buttons, as well as other transceiver status indicators. This specially programmed VE2DX Electronics Design ICOM METER ESP32 device ingeniously samples Icom transceiver CI-V data to display available information in multiple formats, depending upon radio model. This exciting device also includes a custom VE2DX Electronics Design CT17-NANO v2 internal 2 port hub with TrueCIV, a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. Multiple accessory items can be simultaneously served the interfaced transceiver's CI-V data stream via this internal 2-port hub. It supports a many types of Icom CI-V reading station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. This is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its two TrueCIV ports and single USB port. Powered via the USB C port, this unit interfaces to over 20 different ICOM radios using any one of these methods to connect: CI-V via Standard CI-V 3.5mm Remote port cable, Bluetooth CI-V or USBoIP using UDP. Another important feature of the VE2DX Electronics IM1-4BTTUFFV2 is the programmable alarm any time your SWR goes over 3:1. Finally, integrated magnets in the back and bottom of the IM1-4BTTUFFV2 simplifies installation on your portable equipment or in your shack. NOTE: VE2DX Electronics IM1 Meter devices are not transceiver screen adapters and do not display a bandscope. This meter display unit frees up the main display of the 7300, 9700 and 705 for bandscope operations.
( 1 )
$212.99
LDG Electronics Dual Analog Color Meter for IC-7800 Transceivers
LDG Electronics Dual Analog Color Meters for Transceivers provide two 3.5 in. external meters for four specific high-grade transceiver models. They display S-meter on receive, power out, PA current, SWR, ALC level, compression, supply voltages and more—dependent upon the transceiver model. What's more, these multi-function meters and the virtual meter on your radio work simultaneously Each meter is individually backlit by an adjustable color LED, powered by any 12 Vdc, 500ma source. The color and brightness controls are on the back panel. LDG Electronics Meters are fully assembled and calibrated, and both the radio and power cables are included, so you're ready to go right out of the box! LDG Electronics Dual Analog Color Meters feature: * Dual 3.5 in. analog meters * Displays: S-Meter, RF power, SWR, etc. * Color/Brightness: Rear panel adjustment for each meter * Voltage: 13.8 V DC +/-15% * Current draw: 500 mA max * Dimensions (WHD) 8.0 x 4.0 x 4.0 in. (200 x 100 x 100mm) * Weight: 1.5 lbs., 680 g.
( 1 )
$199.99
VE2DX Electronics ICOM HDMI Interface & Screen Combo
Upgrade Your Shack with the VE2DX ICOM HDMI Interface & Screen Combo! Limited quantities! Enjoy a crystal-clear 15-inch HDMI monitor and the powerful IM1-HDMI V2 Digital Meter Display with TrueCIV Data Interface. This compact, ESP32-based device connects seamlessly to over 20 Icom radios via CI-V cable, Bluetooth, or USBoIP, giving you flexible options for any setup. Free your main radio display for band scope operations while monitoring critical metrics on a dedicated screen with customizable bar or needle meters. Engineered for performance, the IM1-HDMI V2 features Bluetooth, USB, and CI-V ports, including an internal CT17B-Nano V2 hub with TrueCIV for unmatched RFI resistance. It supports multiple accessories like band decoders, antenna controllers, amplifiers, tuners, and filters—all powered with a simple USB-C connection or supply. Perfect for IC-705 users, it solves the missing CI-V port issue with Bluetooth pairing. Added perks? A programmable SWR alarm for peace of mind and integrated magnets for quick, hassle-free installation. Note: This is not a transceiver screen adapter and does not display a band scope—it's a dedicated meter display designed to optimize your operating experience. VE2DX Electronics ICOM HDMI Interface and Screen Combos include: • 15 in. HDMI Monitor Screen with power supply. • IM1-HDMI V2 Icom Digital Meter HDMI Display and TrueCIV Data Interface • RFI filtered cables
Not Yet Reviewed
$329.99