Filters
VHF/UHF Cross Booms
M2 Antennas Solid Center Cross Booms
M2 Antennas Solid Center Cross Booms, model CB60, also known as FGCB60 or FCB60, are used for critical VHF/UHF/SHF satellite uplink-downlink systems, EME (moon bounce) and long range terrestrial operations. These Cross Booms feature a super strong 1.625 in. solid aluminum rod center section with two 2 in. outside diameter, 60 in. long, 1/4 in. thick-wall fiberglass tubing sections, to secure large systems or arrays. Built for years of slip free service, Solid Center Cross Booms eliminate the worry of crushing, cracking or splintering the center portion of an all fiberglass cross boom. One of the uses for these extra heavy duty solid center 11 ft. long cross booms are in an azimuth-elevation rotator (AZ-EL). Two medium or long boom Yagi antennas of two different VHF/UHF bands are mounted at each end of the cross boom, as required for satellite uplink and downlink operations. These cross booms are also used for horizontally stacking a phased pair of 2 meter cross polarized Yagi antennas for all-mode terrestrial operations including on FM and SSB/CW, as well as for a pair of circularly polarized Yagi beams for EME. These two applications require a non-metallic cross boom mounted horizontally on a rotating mast or in the AZ-EL rotator, respectively. The ultimate satellite, EME or terrestrial VHF/UHF antenna system uses two of these cross booms mounted vertically at the ends of an 11 ft. metallic cross boom. This type of four cross or circularly polarized Yagi array, horizontally and vertically stacked, provides incredible gain and front-to-back performance, effectively quadrupling your effective radiated power (ERP) and dramatically increasing your reception capabilities. DX Engineering also carries the coaxial cables and M2 Antennas Beams and Power Dividers to build your best-ever satellite, EME or long haul terrestrial phased array installation. Mount them all with M2 Antennas Solid Center Cross Booms from DX Engineering.
( 5 )
$389.99
M2 Antennas CBVHF-UHF59 Cross Booms
M2 Antennas CBVHF-UHF59 Cross Booms are shorter 59 in. aluminum cross boom that are typically used for mounting VHF/UHF Eggbeater Omni-directional satellite antennas. Or you may use them to mount your VHF and UHF Yagi antennas vertically polarized for long range FM work. Horizontally stacked side-by-side vertically polarized UHF Yagi antennas increase the gain of your system by up to 3 dB. CBVHF-UHF59 Cross Boom kits include the 1.50 by 59 in. aluminum tubing cross boom, a pre-drilled 4 x 6 x 3/16 in. boom-to-mast plate and all the hardware necessary to mount this on 1.25 to 2 in. masts. DX Engineering also carries M2 Antennas Power Dividers and phasing cables for your high performance VHF/UHF antenna systems. Enhance your VHF/UHF operations with two antennas and a M2 Antennas CBVHF-UHF59 Cross Boom from DX Engineering.
Not Yet Reviewed
$89.99