Availability
HF Vertical Antennas
DMV Rope Guying Earth Anchors
DMV Rope Guying Earth Anchors are designed for use on ropes to build a custom guying system for your vertical antenna. They are manufactured from high-quality steel and have a protective finish applied for long-lasting durability. DMV Rope Guying Earth Anchors feature a specially designed twisted base to allow for easy installation in the ground. Specifications: - Shaft Diameter: 0.5 in. - Loop Height: 2.24 in. (loop tip to outside top of the loop) - Anchor Length: 15.00 in. - Anchor Width: 3.0 in.
Not Yet Reviewed
$11.99
DX Engineering Radial Wire Biodegradable Anchor Pins
DX Engineering Radial Wire Biodegradable Anchor Pins are designed to keep your cables down to the ground in an Earth-friendly way. They are manufactured from recycled, bio-degradable, PLA (polylactide) resin, the color of which will vary. These biodegradable anchors are easily installed and will hold radial wires in place until lawn roots overtake them, and then disappear. They're ecologically friendly! Depending on the weather conditions, they will degrade in about a year. They don't slowly rust away like metal staples. DX Engineering Radial Wire Biodegradable Anchor Pins are intended for turf or softer ground where they may be pushed in (they feature a wide, flat head for your thumb) or lightly tapped with a tool head--NOT driven in with a hammer. Since they are a plastic-like material, they will be subject to breakage when used in rocky or hard soil or subjected to vigorous impact. Install your ground radials the easy and ecological way- with DX Engineering Radial Wire Biodegradable Anchor Pins!
( 41 )
$19.99
DX Engineering Radial Plate Wire Attachment Hardware Kits
DX Engineering Radial Plate Wire Attachment hardware kits are designed for use in mounting the DX Engineering stainless steel radial plate. Kits include: * Twenty 1/4 in. stainless steel bolts * Twenty 1/4 in. stainless steel nuts * Twenty 1/4 in. stainless steel flat washers * Twenty 1/4 in. stainless steel split washers * Twenty 1/4 in. stainless steel star washers
( 28 )
$11.59
DX Engineering Guy Rings
DX Engineering Guy Rings advance the art of stabilizing vertical rigid telescopic tubing. These newly engineered and incredibly strong Guy Rings are intended for rope guying DX Engineering, Hustler, and all brands of aluminum tubing vertical antennas, as well as the DX Engineering Telescoping Fiberglass and Aluminum Tubing Kits. Unlike the other guys' rings, DX Engineering Guy Rings have smoothed holes with no sharp edges, protecting your directly threaded ropes. Six 5/16 in. diameter attachment holes allow guy ropes to be properly spaced for three or four way guying systems. DX Engineering Guy Rings are made from the super strong, black UV resistant, glass-reinforced poly-resin material that was introduced with DX Engineering's Universal Wire Antenna Kits EZ-BUILD™ UWA Center-T and End Insulators. They are virtually impervious to extreme outdoor conditions and mechanical stress. If you have a DX Engineering wire antenna or UWA Kit, you will know that these Guy Rings are made to last and will set a new standard in rope guying attachments. With their 1/2 in. thick center hole shoulder, these Guy Rings simply slide over their respective tubing size and seat firmly against the top of the larger tubing section below. Three kits with eight sizes provide rope guying for a myriad of vertical tubing installations: - DXE-GR-2P has two guy rings that fit onto the trap tubing of the Hustler BTV Series Vertical Antennas - DXE-GR-4P has four larger guy rings for Heavy Duty Telescoping Fiberglass sets or aluminum tubing - DXE-GR-5P is the original set with sizes for Standard Telescoping Fiberglass sets or various sized aluminum tubing DX Engineering Guy Rings are so handy and inexpensive that you can have a set on hand, ready for your next antenna project. Order yours today!
( 87 )
$10.29
DX Engineering Ground Stakes
DX Engineering Ground Stakes are used to tie down light-duty ropes of wire antennas and vertical antenna rope guys. Of course, they can be used as tent pegs as well. Stakes are designed to be easily pushed or tapped into the earth and easily removed. They have special tabs for wrapping and securing the rope. NOTE: Color and composition of ground stakes is subject to change, so items shipped are not guaranteed to be identical to the image, but will serve the function of attaching rope to the ground for tents and antenna ropes.
( 1 )
$15.49
Hustler Antenna Replacement Parts
Hustler Antenna Replacement Parts allow you to keep your Hustler vertical performing at its peak. These Hustler antennas have been on the market for decades. Literally tens of thousands have been put in service around the world. Whether for routine maintenance or repair due to unfortunate damage, Hustler offers the replacement antenna parts that you need. DX Engineering stocks many Hustler Antenna Replacement Parts for your convenience. At each part, click "More Details" for specific application information.
( 106 )
$13.99
—
$19.99
DX Engineering® OMNI-TILT® Tilt Base Wing Nut Knobs
DX Engineering® OMNI-TILT® Tilt Base Wing Nut Knobs are for the tool-less, quick release of the DX Engineering® OMNI-TILT® Tilt Bases. They are perfect for lowering the antenna for tuning or daily stealth operation. To install them, simply remove the existing hex nuts and thread on the wing nut knobs.
( 8 )
$11.99
DX Engineering Tilt Base Wing Nut Knobs
DX Engineering wing nut knobs are for the tool-less, quick release of the DX Engineering DXE-TB-3 or DXE-TB-4 tilt bases. They are perfect for lowering the antenna for tuning or daily stealth operation. To install them, simply remove the existing hex nuts and thread on the wing nut knobs. The old hardware can be stored on the tilt base for future use. Purchase two sets to also allow for the tightening of the lower mounting hardware without tools and for extended periods of upright installation and use. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 15 )
$11.99
DX Engineering Coil Tap Clips
Supplied in a convenient package, these DX Engineering Coil Tap Clips provide easy, adjustable attachment points to un-insulated coils, including homebrew, Miniductor, and Airdux. They are also useful in non-RF applications, like allowing flying connections to un-insulated wire without soldering or cutting the wire, and will accommodate wire sizes from #20 to 10 #AWG. The clips are furnished with a Phillips head self-tapping screw. They are movable to find the correct tap point and may then be tightened for the final connection. Soldering to the coil wire at that time ensures a permanent bond for outdoor applications. These DX Engineering Coil Tap Clips are silver plated for ease of soldering. The solderable jumper connection end is formed to accept a standard 4mm banana plug (not supplied), making manual tap changing between multiple taps a simple task, once you locate the final tap points.
( 15 )
$10.99
Mastrant MA2 Universal Mast Guying Clamps
Mastrant MA2 Universal Mast Guying Clamps accommodate a wide range of mast diameters and support both 3 and 4-directional guying configurations. A 4-direction kit can also be used for 3-direction configuration, providing maximum flexibility for installation. MA2 brackets are made from 3/32-inch thick 304 stainless steel and feature a drilled hole to insert a screw for securing the guying clamp to the mast. Another option is to utilize a rubber pad between the clamp and the mast made from weather and UV stabilized EPDM. It spreads the pressure on the larger surface of the mast, reducing slippage and moreover isolating the clamp from the mast. The guy line holes measure 1/8-inch diameter and are compatible with shackles, chain couplers, and carabiners sized from 5/32-inch (4mm). They also accommodate thimbles from 1/16-inch (2mm) up to 5/16-inch (8mm).
Not Yet Reviewed
$18.00
DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits
DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits consist of two tinned copper braid straps for a connection between a DX Engineering 4:1 high power UNUN and the ground radial systems and feedpoint of a vertical antenna. These straps are the correct length to allow for short, low inductance connections, and flexible to allow for the use of a tilt base with the antenna. Included with the UN-43-R, both straps measure 10 in. long, 9 in. from center to center of the preformed 1/4 in. holes, 1 in. wide, and 0.045 in. thick. The width and thickness may vary slightly as the flexible braid is stretched or compressed. DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits are the perfect choice when adding an UNUN to your antenna system.
( 2 )
$11.99
DX Engineering Tilt Base Adapter Plate
DX Engineering Tilt Base Adapter Plate, model DXE-TBP-1, is used in several antenna applications with the original DX Engineering Tilt Base. This part is used as a backing plate for the DXE-1071 Insulated Channel on the following current and discontinued models: DXE-4030VA-1 DXE-60VA-1 DXE-7580FS-VA-1 DXE-80VA-1 DXE-80VA-2 DXE-80VA-3 DXE-MBVA-1P DXE-MBVE-1 DXE-MBVE-2 DXE-MBVE-3 DXE-VA-BASE This plate is also included with the TB-4P to convert a TB-3P to accommodate and tilt up to 1.75 in. mast. This DXE-TBP-1 Adapter Plate and the DXE-1071 Insulated Channel are attached together and to the Tilt Base with the DXE-MBV-1HWK Hardware Kit. Special U-bolts, DXE-MBV-200S, mounts only 2 in. OD aluminum tubing antenna element to the channel. The DXE-TBP-1 Tilt Base Adapter Plate is offered here as a replacement part. It may also be used with the DXE-1071 as a backing plate as described above. For vertical antenna projects the DXE-VA-BASE offers all of these parts in a complete, insulated vertical antenna tilt base kit.
Not Yet Reviewed
$17.99
SOTAbeams Guying Hardware Packs
SOTAbeams Guying Hardware Packs include guy rings and top insulators made from acrylic to serve the needs of the portable operator. Different size rings are provided for top and middle guy rope attachment levels. Each has multiple holes for complete versatility in guy rope attachments.
( 6 )
$10.99
Chelegance JPC-12 Portable HF Vertical Antenna Replacement Parts
Chelegance JPC-12 Portable HF Vertical Antenna Replacement Parts are available to replace components that become worn, misplaced, or damaged. Chelegance replacement parts meet or exceed the high quality standards of the original components to ensure optimal performance and reliability.
Not Yet Reviewed
$10.99
Chelegance MC-750 Portable HF Vertical Antenna Replacement Parts
Chelegance MC-750 Portable HF Vertical Antenna Replacement Parts are available to replace any components that become worn, misplaced, or damaged. Chelegance replacement parts meet or exceed the high quality standards of the original components to ensure optimal performance and reliability.
( 9 )
$10.99
—
$15.99
DX Engineering HF Vertical Antenna Replacement Parts
DX Engineering's line of HF Vertical Antenna Replacement Parts are offered for you to perform antenna maintenance or repair. DX Engineering has the antenna parts that you need!
( 1 )
$17.49
Chelegance Replacement Parts for JPC-7 and JPC-12 Antennas
Chelegance Replacement Parts for JPC-7 and JPC-12 antennas allow you to replace lost or damaged components of your portable antenna system. These replacement parts are the same ones that came with your antenna and are genuine OEM replacement parts.
( 2 )
$10.99
COMTEK Vertical Feedpoint Connection Kits
If you are planning to build your own aluminum vertical four-square or 2-element phased arrays, COMTEK Vertical Feedpoint Connection Kits are what you have been looking for. These feedpoint assemblies ease the task of attaching a coaxial cable to your aluminum tubing. Silver SO-239s and stainless steel hardware ensure long life and reliability. Available individually or as a set of four, COMTEK Vertical Feedpoint Connection Kits from DX Engineering give you a great start to your project.
( 1 )
$19.99
DX Engineering Replacement Tilt Base Hardware Kits
DX Engineering Replacement Tilt Base Hardware Kits are genuine replacement hardware kits for the tilt base antennas. They consist of all of the nuts, bolts, fender nuts, and flat and lockwashers needed to replace missing or damaged pieces. They do not include hardware for saddle clamps.
( 2 )
$13.49
—
$15.49
On Sale
WiMo Portable Mast Guy Rings
WiMo Portable Mast Guy Rings are sized for WiMo metric telescoping masts. They're made of fiberglass reinforced plastic, each with three guying thimbles for secure rope attachment without binding or cutting. These guying rings anchor themselves at the mast clamp while allowing the mast to rotate even when anchored with guy ropes. Order the size needed for your application.
( 1 )
$25.99
$19.49