Availability
6 Results Found For "Choke"
DX Engineering Mounting Brackets for COMTEK Baluns and DX Engineering UNUNs
DX Engineering Mounting Brackets for COMTEK Baluns and DX Engineering UNUNs are custom-made adapter plates that accommodate your balun or UNUN when used with MBVE-5 Series antennas. These brackets are supplied with a specific ECLS Series band clamp with studs, to mount these brackets onto MBVE-5A Series antenna bases. Their unique design provides minimum capacitive coupling to the balun wiring and the field surrounding the balun core. These UV-resistant, poly-resin balun mounting brackets will fit other manufacturers' similarly packaged, NEMA box baluns. These kits include the plate, a pair of studded band clamps and stainless steel balun/UNUN mounting hardware. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 8 )
$18.99
DX Engineering Balun Wiring Kits
DX Engineering Balun Wiring Kits are just the right parts for permanently connecting a DX Engineering Maxi-Core® 20 Balun or a legacy Comtek balun to practically any beam, Yagi, Log Periodic or rotatable dipole with stud terminals on its driven element. This wiring kit is not a bracket. This is 8 AWG tinned solid copper wire, 2 ft., and an assortment of tinned solder ring terminals to electrically connect a #10 or 1/4 inch terminal stud balun to either size two stud balanced feedpoint on antennas of several types. Wire a balun to an antenna feedpoint with the DX Engineering Balun Wiring Kits. DX Engineering Balun Wiring Kits include: - Two feet, 8-Gauge Tinned Solid-Copper Bus Wire - Four each, Ring terminal, solder, for #10 stud - Four each, Ring terminal, solder, for 1/4 in. stud - Two each, Star washers, 1/4 in. - Two each, Nyloc hex nuts. 1/4 in. for 1/4-20 balun studs Instructions for installation: 1. Determine the separated routing of the minimal wire length needed for each balun terminal to antenna terminal connection with drip loops (see 2.), no greater than 12 inches each, from the securely mounted balun to antenna feedpoint. Wires must be separated by 1/2 to 1 inch from antenna metal parts and each other. 2. Include enough wire length for a small drip loop, a downward "U" shape in the wire, to prevent rain water from running straight down into either connection. This drip loop also provides wire strain and vibration relief. 3. Cut the tinned copper wire in half and trim excess to make the two wire lengths, preferably identical. 4. Select the terminals that match the balun and the antenna feedpoint. 5. Solder the tinned ring terminals onto the tinned wire. 6. Install each completed wire assembly with the appropriate size Nyloc nut and star washer along with the hardware supplied with the balun. Attach the other end with hardware supplied with the antenna Use an open end wrench on the balun stud mount nut when tightening Nyloc nuts, and then the wing nuts, to prevent stud rotation and possible internal damage to the balun. NOTE: This 8 AWG tinned copper wire fits into the supplied ring terminals even though both the #10 and the 1/4 in. ring terminal terminals are marked 12-10 (AWG). Soldering these ring terminals onto this wire is required for a permanent connection. Only crimping will produce an insufficient connection. These balun wiring kits may be used on many manufacturers' stud terminal baluns.
Not Yet Reviewed
$12.99
DX Engineering Charts and Tech Tips
Unlock decades of proven expertise with DX Engineering Charts and Tech Tips, now assembled in a convenient spiral-bound booklet for easy reference. This comprehensive guide brings together the most valuable charts, technical insights, and practical solutions published through October 2025—all in one place. Whether you're a seasoned Amateur Radio operator or just starting your journey, this resource is packed with essential information: antenna assembly tips, coaxial cable specifications, grounding solutions, balun and choke recommendations, connector preparation guides, and much more. Each section is designed to help you build, maintain, and optimize your station with confidence and precision. Engineered for quick access, this spiral-bound format lays flat on your desk or workbench, making it the perfect companion for hands-on projects. From troubleshooting to advanced installations, DX Engineering Charts and Tech Tips is your go-to reference for achieving peak performance and reliability in every aspect of your station.
( 1 )
$14.99
Alpha Delta SEP Arc-Plug® Static Electricity Protectors
Alpha Delta SEP Arc-Plug® Static Electricity Protectors are mounted in the DELTA-C Center Insulator and bleed off slow-rising static electricity charges by routing them harmlessly to ground, before they can enter the shack through the feedline. This method is far more effective than DC-grounded baluns or chokes, which can be "popped" by static charges. Dangerous static charges are developed from thunderstorms, high-wind driven snow, or desert sand. The static electricity generated by these forces has been measured to thousands of volts. They're so potent; they can puncture the dielectric of unterminated coax. Alpha Delta SEP Arc-Plug® units are OEM replacements for the protectors located in the back of DELTA-C Center Insulators and are easily replaced by carefully removing the #10 stainless steel hardware used to attach the ends of the antenna wires. Please note the assembly order of your washers, lock washers, wires, nuts, and carefully re-assemble them in the same order after replacing the static electricity protector cartridge. Keep antenna-produced static electricity out of your receiver or transceiver. Order Alpha Delta SEP Arc-Plug® Static Electricity Protectors from DX Engineering and keep a few on hand!
( 3 )
$19.99
CTU Books 2012 Contest University Textbooks
Order CTU Books 2012 Contest University Textbooks give you the opportunity to gain knowledge that may take you years of practice, trial and error, or lost time to learn otherwise. Get the edge to improve your scores and put your station in the winner's circle. Over the last decade Contest University has presented dozens of programs around the world to teach Radiosport techniques and practices. Their program content changes from year to year to cover a myriad of topics. These 2012 Contest University Textbooks contain the complete set of slides, in print, from the 2012 CTU program. Topics and Presenters include: * The Spirit of Contesting. It Matters!, N6TR * Short Vertical RX Antennas and Feedline Chokes, W8WWV * Small-Station Projects and Contest Operating Strategies, N0AX * Towers: Safety, Maintenance, Proper Load Design, K7NV * 2012 VHF Contesting, W5ZN * Contesting From a City Lot, K2RD * Antennas for Contesting: How They Do What They Do, W3LPL * Contesting From Outside of the USA, XE1KK * Setting up for RTTY Contesting, W0YK * Contest Clubs: Starting, Revitalizing and Growing, W5WZ * Coaxial Feed Lines for Competitive Contesting, W3LPL * The Reverse Beacon System and CW Skimmer, N6TV * Operating a RTTY Contest, W0YK * Enriching Your Contest Experience, K3LR * The Fitful Rise of Solar Cycle 24: What it Means for the Coming Year, W3LPL * Transceiver Performance: 10 Years of Change, NC0B 2012 Contest University Textbooks have 170 pages of presentation talking-point slides, four slides to a page, which will help you to become a successful contester. There is also a handy glossary of Radiosport terms and abbreviations. Ham Radiosport is as competitive as ANY form of sport. Give yourself an edge by reading Contest University textbooks now available from DX Engineering!
Not Yet Reviewed
$19.99
CTU Books 2013 Contest University Textbooks
CTU Books 2013 Contest University Textbooks give you the opportunity to opportunity to gain knowledge that may take you years of practice, trial and error, or lost time to learn otherwise. Get the edge to improve your scores and put your station in the winner's circle. The 2013 Contest University Textbooks contain the complete set of slides, in print, from the 2013 CTU program. Topics include: * Radio Sport Contesting, It's More Than Rules, K5GN * RFI and Ham Radio, K9YC * Tips on Being a Better Single Operator, K5ZD * Post-Contest Log Analyzers, K6MM * VHF Contesting, W5ZN * Ferrite Transmitting Chokes, K9YC * Design, Installation & Maintenance of Antennas, Towers and Rotators, W3LPL * How to Make Your Multi-Op Contest Operation More Effective, K1DG * Setting Up for RTTY Contesting, W0YK * How to Operate with Increased Accuracy and Contesting Fair Play, K3EST * Contest Antennas and Coaxial Cables, W3LPL * CW Skimmers, DX Cluster and The Reverse Beacon Network, N6TV * Operating a RTTY Contest, W0YK * Station Notebook and Your 2013 Antenna Projects, K3LR * K9AY Loop Arrays for Low Band Contesting, K4IQJ * Propagation Trends 2013-14 Q&A, W3LPL * Rotors and Construction Practices Q&A, W3LPL * 2013 Contest Radio Performance, NC0B Over the last decade Contest University has presented dozens of programs around the world to teach Radiosport techniques and practices. Their program content changes from year to year to cover a myriad of topics. 2013 Contest University Textbooks have 240 pages of presentation talking-point slides, four slides to a page, which will help you to become a successful contester. There is also a handy glossary of Radiosport terms and abbreviations. Ham Radiosport is as competitive as ANY form of sport. Give yourself an edge by reading Contest University textbooks now available from DX Engineering!
Not Yet Reviewed
$19.99