Availability
23 Results Found For "hex"
Wera Tools 950 Hex-Plus 1 L-Key Wrench Sets
Wera Tools 950 Hex-Plus 1 L-Key wrench sets will help you tackle even the toughest of jobs. These high-quality L-Keys set is for hexagon socket screws. The Hex-Plus L-Key profile offers larger contact surfaces at the screw head and the notch effect is thereby reduced to a minimum, so the destruction of the screw head almost eliminated. Tools from size 3 onwards offer a holding function through a pressed resilient ball, which is especially helpful where there is no room for a second hand to secure the screw on the tool. The L-Keys are made from quality steel and thanks to chrome-plating design provides high-corrosion protection for long service life. Each L-Key in this set has been laser-engraved with size markings to make it easy to select the right tool for the job. The wear-resistant clip securely holds all the L-Keys together yet allows for easy tool removal.
Not Yet Reviewed
$18.99
Wera Tools 950 Hex-Plus Black Laser L-Keys
Wera 950 Hex-Plus Black Laser L-keys are designed for hexagonal socket screws and come in a practical clip fastener made out of wear-resistant material, enabling secure storage of the L-keys—as well as simple removal. These L-keys with Hex-Plus profile offer a larger contact surface within the screw head, which reduces the notching effects to a minimum, and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The Black Laser surface treatment provides outstanding surface protection, even against corrosion. Wera Tools Take It Easy color-coding and size markings on L-keys provide easy identification and tool selection.
Not Yet Reviewed
$16.99
Sunex Tools Hex Drive Impact Sockets
Sunex Tools hex drive impact sockets are offered as sets or individually in several SAE and metric sizes. Stubby design hex bits are also available to fit into tight areas. Each socket is machined from CR-MO alloy steel and finished with black oxide for long life. Order the style, size, and quantity needed for your toolbox; multi-piece sets include a heavy-duty storage case.
Not Yet Reviewed
$10.99
—
$16.99
DX Engineering Hex Bolt Hardware Sets
DX Engineering Hex Bolt Hardware Sets let you choose the length of the bolts you want to use for your DX Engineering Clamps. To support the extreme versatility of DX Engineering Clamps, these stainless steel bolt sets come in specially selected pairs for Super Duty Saddle Clamps, Heavy Duty Saddle Clamps and our Resin Support Blocks. Eight bolt sets are provided specifically for our Genius Clamps. One of these Hex Bolt Hardware Sets will complete your order for any DX Engineering Clamps that requires a straight hex bolt. Perfectly sized for the Super Duty and Heavy Duty Saddle Clamps, various sizes of 8-18 stainless steel hex bolt sets include two hex head bolts, two split washers, and two nuts, with four flat washers, or with two flat washers for the Resin Support Blocks. Genius Clamps Bolt Sets include 8 bolts, flat washers, split washers and nuts. Please remember that price and quantity of parts vary according to the application. Saddle Clamps are typically mounted on a customer supplied 1/4 inch plate with one of these specified DX Engineering Hex Bolt Sets. Click "More Details" and find the clamp dimensions chart linked in the Documents tab, or view the recommended or required parts listing at each clamp to find the matched bolt set of minimum usable length. Longer bolt sets may be used for special applications such as on plates of greater thickness. However, some DX Engineering Hex Bolts are not threaded for their entire length, so each set will only work for a specific range of mounting plate or tubing thickness. NOTE: The use of anti-seize thread lubricant is REQUIRED on all stainless steel hardware BEFORE initial assembly. 18-8 Stainless Steel bolts have a tightening torque specification of 132 in/lbs. Our DX Engineering Genius Clamps, Super Duty Saddle Clamps, Heavy Duty Saddle Clamps and Resin Support Blocks are superior products. Use DX Engineering Hex Bolt Hardware Sets as the proper high-quality companion hardware for your clamps. Order them today from DX Engineering!
( 6 )
$10.49
—
$19.99
DX Commander EzyClamp Replacement Mast Clamp Kits
DX Commander EzyClamp Replacement Mast Clamp Kits serve as direct replacements for the mast clamps originally supplied with the DX Commander Telescoping Masts and come packaged with the proper size and quantity of clamps needed. These replacement clamps are constructed of durable Nylon 66. When properly installed and torqued at the bottom of each telescoping section, they ensure that each mast section will not compress under pressure. EzyClamps features an 8mm hex, however the Expedition clamps feature a wing nut style thumbscrew. Additional Features and Specifications: * Adjustment – 8mm (approx. 5/16 in.) Hex Screw (Expedition clamps include a wing nut) * Max Torque – 2.0Nm * Band Width – 0.50in. – (12.7mm) * Operating Temperature – Max Long term Temp 257°F (125°C) – Occasional Peak Temp 302°F (150°C) * Material - Nylon 66 * RoHS Compliant * No Hazardous Materials * Flammability - UL 94 V-2 * Minimum Tensile Strength - 359lbs/163kg/1600N * Continuous Load - 20lbs/9.1kg/89N
( 8 )
$15.99
—
$18.99
DX Engineering Secure Mount Bolt Kits
DX Engineering Secure Mount Bolt Kits are special stainless steel hex bolts with a coating on the threads that keeps them in place! Available in either 1/4-20 or 5/16-18, these bolt kits are provided to fit to popular HAM series and Tailtwister rotators, used by hams around the world. Perfect for use on new installations and as replacements, these "patch bolts" stay where they are placed and will not back out under vibration, which can be a problem with standard bolts. Depending upon model, Secure Mount Bolt Kits include five or six sets stainless steel bolts, flat washers and split washers. Secure your rotator with DX Engineering Secure Mount Bolt Kits.
Not Yet Reviewed
$11.99
—
$15.99
Firestik Antenna Company K-4A Thru Hole Antenna Stud Mounts
Firestik Antenna Company K-4A Thru Hole Antenna Stud Mounts have become an industry standard due to their outstanding design and material quality. The coupling nut is made from chrome-plated machined brass, 5/8 in. (16 mm) stock, nylon, and stainless steel hardware to ensure durability and reliability. Their heavy-duty 3/8 in. center shanks provide trouble-free use and guards against lost antennas.
( 2 )
$10.99
DX Engineering Radio Side Rail Replacement Hardware Kits
DX Engineering Radio Side Rail Replacement Hardware Kits are designed to fit all models in the DX Engineering Radio Side Rail series, including the DXE-RSR-891, DXE-RSR-7300, and DXE-RSR-710—this kit provides a complete set of high-quality replacement hardware for refreshing or rebuilding your radio side rail installation.
Not Yet Reviewed
$19.99
On Sale
CHANNELLOCK 6-in-1 Professional Multi-Bit Screwdrivers
CHANNELLOCK 6-in-1 Professional multi-bit screwdrivers are American-made drivers—and they mean business with two double-ended high alloy steel bit tips and a double-ended shank that is coated with black oxide finish for corrosion resistance. These tools are the strongest, most durable drivers, specifically designed to take the rigors of everyday use—and keep coming back for more! CHANNELLOCK 6-in-1 Professional multi-bit screwdrivers feature: * Durable and solvent-resistant high-torque acetate handles include a stamped part indicator for easy identification * Heat-treated alloy steel shaft * Precision-machined tips for precise fit on fasteners * Easily swap between the 6 most common fastener sizes with a flip of the durable alloy steel shaft (tube and bits pull out and reverse easily) * Phillips sizes: 1 and 2 * Bits are zinc coated and shank is black oxide coated
Not Yet Reviewed
$14.99
$13.95
DX Engineering Stainless Mounting Clamps with Studs
DX Engineering Stainless Mounting Clamps With Studs are ideal for mechanical and electrical fastening to round or odd-shaped tubing or pipes without drilling a hole. Also known as studded band clamps, these stainless clamps are equipped with a stainless 10-24 threaded stud welded to the band. Supplied with stainless hex nuts and washers, these rugged band clamps are made entirely from marine-grade stainless steel; even the worm-gear screw and housing. DX Engineering Stainless Mounting Clamps with Studs may be used for electrical and RF connections, including grounding. Mount them to all types of rigid tubing including fiberglass, PVC, EMT and other non-metallic and metallic conduits, tubes and pipes including iron, steel, stainless steel and aluminum. They are great for mounting baluns to antenna booms, attaching mounting brackets, coils, top hats, and electrical connections to tower legs. Use them on antenna elements for creation of feed point connections without drilling a hole that might weaken the tubing! These are ALL STAINLESS studded clamps, perfect for the mechanical assembly of components, attachment of signs and so many other uses… think of all the possibilities! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. These studded band clamps are available in sizes for nearly every imaginable application, from 1/2 in. to 3 1/4 in. Order extra DX Engineering Stainless Mounting Clamps with Studs to keep on hand for those unexpected mounting and assembly projects!
( 20 )
$18.99
—
$19.99
DX Engineering® OMNI-TILT® Tilt Base Wing Nut Knobs
DX Engineering® OMNI-TILT® Tilt Base Wing Nut Knobs are for the tool-less, quick release of the DX Engineering® OMNI-TILT® Tilt Bases. They are perfect for lowering the antenna for tuning or daily stealth operation. To install them, simply remove the existing hex nuts and thread on the wing nut knobs.
( 8 )
$11.99
DX Engineering Tilt Base Wing Nut Knobs
DX Engineering wing nut knobs are for the tool-less, quick release of the DX Engineering DXE-TB-3 or DXE-TB-4 tilt bases. They are perfect for lowering the antenna for tuning or daily stealth operation. To install them, simply remove the existing hex nuts and thread on the wing nut knobs. The old hardware can be stored on the tilt base for future use. Purchase two sets to also allow for the tightening of the lower mounting hardware without tools and for extended periods of upright installation and use. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 15 )
$11.99
Cycle 24 Galvanized Economy Saddle Clamps
Cycle 24 Galvanized Economy Saddle Clamps offer U-bolt clamps that are an inexpensive solution for your antenna and tower projects. Their galvanized steel saddles and U-bolts will last for many years in outdoor environments. All of their saddle clamps include split lock washers and hex nuts. Their 3/8 in. diameter U-bolts feature a unique, flat surface at the top of the U-bolt for improved gripping of the tubing. The 3 in. and 3-1/2 in. saddles are closed and spot-welded on the ends, before galvanizing, for increased strength and longevity. All Cycle 24 saddle clamps are strong! Because of this, care must be taken not to crush aluminum tubing when tightening these clamps. DX Engineering is the exclusive retailer for Cycle 24 Galvanized Economy Saddle Clamps. Order yours today and get that project off the ground! Bolt diameters and threads: * U-bolts for tubing sizes 1-1/4 in. through 2-1/8 in. available in 5/16-18 threads * U-bolts for tubing size 2 in. are available with 5/16-18 threads or 3/8-16 threads * U-bolts for tubing sizes 2-1/4 in. through 3-1/2 in. available with 3/8-16 threads NOTE: Due to added thickness on the saddle caused by the galvanizing process, the 2-in. 5/16 thread clamp is NOT recommended for use on steel masts of 2-in. O.D. For steel masts use the 2-in. 3/8 thread product. Cycle 24 Economy Clamp U-bolts with a bolt diameter of 5/16 in. are suitable for plates up to 3/16 in. thick when using saddles. If saddles are not used, the 5/16 in. U-bolt will accommodate a 1/4 in. thick plate. U-bolts with a bolt diameter of 3/8 in. are suitable for plates up to 9/16 in. thick.
( 14 )
$10.49
—
$12.99
DX Engineering Heavy-Duty Saddle Clamps
Our tradition of continuous innovation was evident with the introduction of the DX Engineering Heavy-Duty Saddle Clamp line. DX Engineering set new standards over a decade ago with the introduction of the industry's best clamps for mounting antennas and element tubing. Featuring superior gripping power, our new Heavy-Duty Saddle Clamps are available in six different sizes, to fit tubing with Outside Diameter (OD) inch sizes of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00. Commercial and industrial engineers and installation technicians all over the world have discovered a diverse range of applications for DX Engineering Heavy Duty Saddle Clamps. DX Engineering Heavy Duty Saddle Clamps are designed to be used where maximum torque handling is required on aluminum, steel or stainless steel tubing. Conceived of by builders of large and heavy Yagi antennas and Log Periodic arrays, these clamps are made in sizes that securely fit the outside diameter of tubing for mounting to a flat plate or surface. Their wide gripping surface equals superior clamping power! Perfect for antenna construction and mounting, or wherever standard U-bolt saddle clamps and other torque-control products have proven inadequate, our Heavy Duty Saddle Clamps provide excellent grip on booms, masts and element tubing. Unlike stamped or machined-type clamps, Heavy Duty Saddle Clamps are cast from a rugged aluminum alloy that grips tubing with a special textured surface and are sized for an incredibly secure fit that resists torque, wind and weather. Heavy Duty Saddle Clamps include two cast aluminum saddles (two halves) and a stainless steel reinforcement plate for high strength and superior corrosion resistance. Due to the wide diversity of clamping applications where Heavy Duty clamps are beneficial, mounting hardware is NOT included. However, a complete line of Armor-Coated and Stainless Steel Hex Bolt Hardware Sets are available for top performance in most mounting applications. Typical Heavy Duty clamp mounting applications on a 1/4 in. plate require a minimum length bolt set, as indicated in the chart, linked in "More Detail…," and displayed in the "Required Parts" tab. For larger tubing attachment applications with ultimate gripping strength, DX Engineering Super Duty Saddle clamps are also available for 2.0, 2.5 and 3.0 in. O.D. sizes. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Plan your next project with the best clamps available... period. DX Engineering Heavy Duty Saddle Clamps are ready to provide superior performance for your antenna, mast or other tubing mounting application.
( 11 )
$10.49
—
$19.99
DX Engineering Balun Wiring Kits
DX Engineering Balun Wiring Kits are just the right parts for permanently connecting a DX Engineering Maxi-Core® 20 Balun or a legacy Comtek balun to practically any beam, Yagi, Log Periodic or rotatable dipole with stud terminals on its driven element. This wiring kit is not a bracket. This is 8 AWG tinned solid copper wire, 2 ft., and an assortment of tinned solder ring terminals to electrically connect a #10 or 1/4 inch terminal stud balun to either size two stud balanced feedpoint on antennas of several types. Wire a balun to an antenna feedpoint with the DX Engineering Balun Wiring Kits. DX Engineering Balun Wiring Kits include: - Two feet, 8-Gauge Tinned Solid-Copper Bus Wire - Four each, Ring terminal, solder, for #10 stud - Four each, Ring terminal, solder, for 1/4 in. stud - Two each, Star washers, 1/4 in. - Two each, Nyloc hex nuts. 1/4 in. for 1/4-20 balun studs Instructions for installation: 1. Determine the separated routing of the minimal wire length needed for each balun terminal to antenna terminal connection with drip loops (see 2.), no greater than 12 inches each, from the securely mounted balun to antenna feedpoint. Wires must be separated by 1/2 to 1 inch from antenna metal parts and each other. 2. Include enough wire length for a small drip loop, a downward "U" shape in the wire, to prevent rain water from running straight down into either connection. This drip loop also provides wire strain and vibration relief. 3. Cut the tinned copper wire in half and trim excess to make the two wire lengths, preferably identical. 4. Select the terminals that match the balun and the antenna feedpoint. 5. Solder the tinned ring terminals onto the tinned wire. 6. Install each completed wire assembly with the appropriate size Nyloc nut and star washer along with the hardware supplied with the balun. Attach the other end with hardware supplied with the antenna Use an open end wrench on the balun stud mount nut when tightening Nyloc nuts, and then the wing nuts, to prevent stud rotation and possible internal damage to the balun. NOTE: This 8 AWG tinned copper wire fits into the supplied ring terminals even though both the #10 and the 1/4 in. ring terminal terminals are marked 12-10 (AWG). Soldering these ring terminals onto this wire is required for a permanent connection. Only crimping will produce an insufficient connection. These balun wiring kits may be used on many manufacturers' stud terminal baluns.
Not Yet Reviewed
$12.99
ROHN TRTBAG Lag Bolt Kits
ROHN TRT-Series roof tripods are very popular. But the trip to the hardware store to get lag bolts for mounting them is not. When you order a TRT-36 or TRT-60 tripod you can order the lag bolts, too. ROHN TRTBAG Lag Bolt Kits contain the six lag bolts that you'll need to install your tripod. They even include 6 rubber-backed steel washers to seal under the bolt heads. These lag bolt kits include high-quality steel bolts that are galvanized for corrosion resistance and long life. Their shouldered hex heads are easily driven with box wrenches or sockets. These bolts are 2.00 in. long and 3/16 in. thread diameter with 3/8 in. hex heads. Whether using ROHN TRT tripod roof towers or some other permanent-mount brand we offer, these lag bolt kits will provide the strong, reliable attachment you need. Order your ROHN TRTBAG Lag Bolt Kits from DX Engineering today!
Not Yet Reviewed
$17.99
Chelegance RB-400 Adjustable Trunk Lip Mounts
Chelegance RB-400 Adjustable Trunk Lip Mounts fit on most lips on trunks or hoods. These robust stainless-steel mounts are designed to attach securely to the lip of a hood or trunk and will provide a stable base for taller antennas. The mount articulates on almost every axis to keep your antenna vertical regardless of the angle. The wide base allows for stability at highway speed, and the four set screws ensure both a solid mounting surface to the vehicle and a decent ground for an antenna that requires it. This mount is an economical way to get your mobile station on the air. Includes hex wrenches for adjustments.
Not Yet Reviewed
$13.99
Eclipse Tools 11-in-1 Screwdrivers
Eclipse Tools' 11-in-1 screwdrivers offer 11 different tools in one small package! With the double-ended extension with positive locking action and the ability to drive common hex heads, this little powerhouse gets the job done in one tool, making it an essential addition to every toolbox. Features include: * Holds four double ended bits * Converts to three nut driver sizes * Quick and easy tip swapping * Double ended 1/4 in. bits x 4 pieces * 1/4 in. socket/bit holder * Double ended socket/extension
Not Yet Reviewed
$15.99
Taylor Battery Cable Terminal Kits
Taylor Battery Cable Terminals allow you to install a new terminal with simple tools and little effort. These terminals use hex-nut compression fittings to firmly attach to the cable. TAY-21412 connectors are automotive battery-post type, while TAY-21414 ring terminals will fit large studs up to marine-battery size. These brass or copper (depending on model) compression battery cable terminals are designed for fast and easy installation. Simply strip your battery cable, apply the compression fitting, and screw it into the battery terminal. These terminals and compression fittings are cadmium plated for corrosion resistance. Whether your application is for a battery post or a stud, one of these Taylor Battery Cable Terminals from DX Engineering will get you amped up!
Not Yet Reviewed
$17.99
DX Engineering Silver Plated UHF Flanged Double Female Bulkhead Connector Kits
DX Engineering Silver Plated UHF Flanged Double Female Bulkhead Connector Kits are high-quality silver-plated connector kits that provide a positive, permanently secure connection for your coaxial cable. These two-sided female connectors have superior silver-plated bodies with silver contacts that ensure the best performance for any application. Silver plated connectors conduct RF very well, even when their outer surface tarnished. Their robust mounting flange, which employs four mounting screws, means that these bulkhead connectors won't work loose like those with concentric nuts and washers. Once mounted to any panel or bulkhead using the included DXE-FSM-HWK Hardware Kit, these flanged bulkhead connectors will provide the best possible connection and stay that way… period. Additionally, unlike many common nickel-plated bulkhead connectors, our silver-plated bulkhead connectors have no air space within their midpoint. This area of solid and superior PTFE dielectric between the center conductor and body maintains constant impedance and ultimate performance. When using our Radial Plate, Tower Leg Brackets or SO-239 Mounting Brackets, our Silver Plated UHF Flanged Double Female Bulkhead Connectors are the best way to bond your coax to ground this side of Cad-Welding! It's extremely important, when this connector is used with our DXE-RADP-3 Radial Plate, to ensure the best possible connection to the radials. No more RF current can flow within the antenna than is also delivered from the radials. A bad coaxial cable shield connection to the radial plate and the radials will limit your transmissions being heard by others and their signals heard by you. The same consideration applies when connecting your coax to Tower Leg Brackets and SO-239 Mounting Brackets for grounding purposes. Details for our Silver Plated UHF Flanged Double Female Bulkhead Connector Kits: * Description: Bulkhead mount, UHF female to UHF female * Body Material: Brass * Body Plating: Silver * Body Style: Flanged Dual Female * Contact Plating: Silver * Frequency Range: DC - 500 MHz * Dielectric: PTFE * Impedance: 50 Ohms * Includes DXE-FSM-HWK hardware Use of the included DXE-FSM-HWK hardware ensures an excellent connection of the flange of the connector - and hence the shield of the coax - to the ground to which the flange is connected. Comprised of a set of four 4-40 x 1/2 in. screws, four flat washers, four star washers and four nylon locking nuts, these hardware kits will keep your flange-mount coaxial connectors in place. Made of superior grade stainless steel and tough nylon, these hardware kits will last and stay bright for decades. DX Engineering Silver Plated UHF Flanged Double Female Bulkhead Connector Kits are the finest and most convenient bulkhead connectors available. Order yours today!
( 21 )
$18.28
DX Engineering Chassis Mount SO-239 Coaxial Connectors
DX Engineering Chassis Mount SO-239 Connectors are 50 ohm connectors that provide a positive, secure connection for your coaxial cables to or from your radio or antenna system. DX Engineering offers high-quality Amphenol® and non-Amphenol brand SO-239 chassis mount connectors for you to choose from. Silver plated brass bodies, conductors and PTFE dielectric or glass-reinforced PBT insulation ensures the best performance for your application. SO-239 panel mount connectors are also available and all connectors come with the correct hardware. Choose the coaxial connectors you need the most from our selection of DX Engineering Chassis Mount SO-239 Coaxial Connectors!
( 23 )
$16.99
Eclipse Tools Lunar Series Die Sets
Eclipse Tools Lunar Series Die Sets Are designed for crimping connectors on various wire and coax connectors. Made from high quality steel and coated in a black oxide powder coat, these dies are designed to last. These Die Sets work with the DX Engineering Crimp Frame.
Not Yet Reviewed
$17.35
DX Engineering Replacement Saddle Clamp Bolts
DX Engineering Replacement Saddle Clamp Bolts are constructed of durable and corrosion resistant stainless steel and include replacement stainless steel washers and nuts. DX Engineering replacement saddle clamp bolts provide maximum surface contact to prevent slippage. These saddle clamp bolts are perfect for securing aluminum tubing for any antenna, mast or tower project. Replace lost or damaged U and V-bolts with new ones from DX Engineering. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 5 )
$13.49