Availability
36 Results Found For "soldering"
Performance Tool Lead-Free Solder
Performance Tool lead-free solder is the ideal solution to securing your connections! It comes in a 10 ft. roll, packed away in its own storage tube. Keeping a couple of these tubes around the garage in your toolbox is a great idea!
( 1 )
$13.99
CAIG Solder Flux and Tinners
Electronic or craft soldering is a snap with CAIG Laboratories solder flux and tinners! These products make solder flow very easily and keep soldering tips clean and bright. CAIG soldering flux is a mildly-activated rosin flux that is considerably more active than water-white rosin. Although its activity closely approaches that of fully activated rosins, it still conforms to all of the requirements of Type RMA of the Federal Specification QQ-S-571 and also the IPC-J-004 standard for type ROL0—the lowest residue corrosive category. These products possess good thermal stability, enabling excellent wetting and reduced carbonization at soldering temperatures. GAIG tip tinners are exclusively for the cleaning and protection of soldering iron tips. Preventing oxidation of tips is paramount to effective heat transfer and encouraging rapid solder flow. Additionally, tip tinners facilitate the fresh flow of solder directly onto the tip, increasing tip wetting and soldering efficiency. Whether you use soldering equipment daily or only occasionally, these soldering accessories just make it all easier. Order your CAIG Laboratories solder flux and tinners from DX Engineering!
( 3 )
$13.95
ISO-TIP Silver-Bearing Solder Paste
No mess! No waste! Their disposable 7.1 gram syringes of ISO-TIP Silver-Bearing Solder Paste are convenient, easy to apply and work with a match, lighter, soldering iron or torch. Features and benefits: * Ten times stronger than conventional 60/40 solder paste * Offers a tensile strength of 10,000 to 28,000 psi * Flows freely and smoothly between 395 and 430 degrees Fahrenheit * Re-melts at 550 degrees F * Flux is blended in - no additional flux required * Made with premium, refined, powered metals * Approximately 2 percent silver and 98 percent tin Silver-Bearing Soldering Paste allows anyone to solder all ferrous and non-ferrous materials including black steel, bronze, cast iron, chrome, coated steel, copper, gold, Monel, nickel, platinum, silver and steel. It provides strength without the distortion of high temperature brazing, offers superior electrical conductivity and is resistant to stress and vibration. Use for soldering: * Wires * Connectors * Cables * Copper piping * Home plumbing * Car radiators … and much, much more! ISO-TIP Silver-Bearing Solder Paste is like magic! Make a little magic with your soldering. Order Iso-Tip Silver-Bearing Solder Paste from DX Engineering.
Not Yet Reviewed
$17.99
American Beauty Paragon Lead-Free Soldering Iron Tips
Starting with a pure solid copper core, American Beauty Paragon lead-free soldering iron tips undergo multiple processes to ensure the best performance and longest life. They select only premium alloys that combine the characteristics of high thermal conductivity with the corrosion resistance required for effective soldering. All American Beauty Paragon lead-free soldering iron tips undergo a multitude of processes that include iron cladding, nickel plating, chrome coating and pre-tinning. Each process is conducted in a clean environment to prevent contamination and ensure proper material adherence. The end result is a soldering tip that provides optimal performance over a long life span. Naturally, all American Beauty tips are lead-free and RoHS-compliant. American Beauty Paragon lead-free soldering iron tips are available in a wide variety of shapes and styles to meet your soldering needs!
Not Yet Reviewed
$14.50
—
$19.99
ISO-TIP Replacement Soldering Tips
ISO-TIP Replacement Soldering Tips match any job and easily snap in and out of all Iso-Tip rechargeable soldering irons including the EZ Change, Quick Charge, "60" Pro Charge and Power Pro models. Standard tips reach soldering temperature in about 10 seconds and attain a maximum temperature of approximately 900 degrees Fahrenheit. High-Efficiency tips heat up faster and provide 20 percent more soldering time per charge than standard tips. Tips reach temperature in less than ten seconds and also reach a maximum tip temperature of approximately 900 degrees Fahrenheit. Iso-Tip cordless soldering irons are the most convenient on the planet. Make sure that you get genuine ISO-TIP Replacement Soldering Tips from DX Engineering to keep your irons in great shape.
( 1 )
$14.99
—
$15.99
American Beauty Soldering Iron Cradles
American Beauty Soldering Iron Cradles provide a secure place to rest your iron without risk of damaging the bench or other equipment. There isn't anything worse than the sight of a red-hot soldering iron slowly rolling off your work top. These cradles are designed to work with American Beauty's 100 to 550 watt irons. They can can really take the heat! Don't expect your iron to stay put without help. Avoid all sorts of accidents, including painful burns, by resting your iron in a cradle designed for the job. Order one of your own American Beauty Soldering Iron Cradles from DX Engineering.
( 1 )
$10.99
—
$15.99
American Beauty Solder Suckers
American Beauty Solder Suckers are a durable and efficient device for the removal of solder from components and circuit-board traces. Their nylon tips resist heat and clogging, while their large 3 oz. rubber bulb provides ample vacuum to remove large amounts of solder in a single operation. For ease and convenience in de-soldering, there are no better choices than American Beauty Solder Suckers from DX Engineering.
Not Yet Reviewed
$12.99
Eclipse Tools SI-B162 Battery Operated Soldering Irons
Eclipse Tools SI-B162 Battery Operated Soldering Irons features a compact, battery operated cordless design that allows for optimum portability. The SI-B162 boasts a rapid heat-up time of only 15-20 seconds, ensuring that it's ready to use at a moment's notice! The safety cap automatically powers down the device when it's attached. Power consumption is only 8W, with a maximum temperature of up to 842° F (450° C) and will maintain a soldering temperature of at least 600° F (300° C). Requires 3 1.5V Alkaline AA Batteries (not included) Additional Features and Specifications: * Length: 7 inches * Power Consumption: 8W * Maximum Temperature: 842°F (450°C) * Heat-Up Time: 15 to 20 seconds
Not Yet Reviewed
$18.99
American Beauty Soldering Tool Parts and Components
If American Beauty's soldering tools were of typical quality, then they wouldn't offer an extensive list of soldering tool parts and components. In fact, their tools are designed to withstand the stress of production-line usage in the most difficult and rigorous industrial environments. However, as those familiar with soldering are well aware, soldering tools require regular maintenance and the occasional replacement of consumable parts. Historically, soldering-tool manufacturers had whole departments set up to service tools for their customers. As budgets tightened and these departments were eliminated, tools that were meant to last a decade or more were tossed in the trash, just like the cheap imports. American Beauty soldering tools were designed from the beginning to be serviceable! Their heating elements, connectors, handles, cord sets, foot switches, electrodes, and many other kinds of parts are replaceable. American Beauty even offers Maintenance kits and instructions on how to care for, and extend the life of, their tools! To save money on tools, you need to buy a quality tool that's right for the job...as well as serviceable. American Beauty soldering tool parts and components are now available from DX Engineering and will provide the means for you to keep your soldering tools working (and in great shape) for a long, long time!
Not Yet Reviewed
$14.90
—
$19.99
Eclipse Tools Portable USB Soldering Irons
Eclipse Tools' portable USB soldering irons are the perfect travel and field companions. Designed to be powered off standard USB ports, these compact, yet powerful, soldering irons draw only 8 watts while still maintaining a high tip temperature and rapid warm-up. In addition, the innovative capacitive-touch switch and in-use LED provide extra safety. The capacitive-touch switch must be held to power the iron which helps to avoid accidental heating or injury. To use, keep finger over the sensor. Remove finger to start cool down process. Solve your soldering problems wherever you go with Eclipse Tools' portable USB soldering irons from DX Engineering! Features include: * Compact and portable design * Heat up 15 seconds, cool down 30 seconds * Low power consumption, 8 watt * Temperature range up to 896°F * Metal touch sensitive switch * Power indicator to avoid accidental burns
( 1 )
$13.99
Kester 186 Flux Pens
Kester 186 Flux Pens are specifically designed for leaded and lead-free rework of conventional and surface mount circuit board assemblies. Although their fluxing ability approaches that of Type RA flux, residues after soldering are non-corrosive and non-conductive. Kester 186 fluxes have been developed for use in critical applications where difficult assemblies are to be soldered, but process requirements stipulate use of Type RMA flux. Kester 186 possesses high thermal stability for soldering multi-layer assemblies which require higher temperatures. Exposure to high preheat temperatures does not degrade solubility of the residue in normal cleaning solvents. There is no surface insulation-resistance degradation caused by flux residue. The use of a minimum of ionic activating agents and the inactive nature permits leaving the residue on circuit board assemblies for many applications. The flux residue is also moisture and fungus resistant. Flux pens are an easy and effective way to apply solder flux. Contact DX Engineering to get your Kester 186 Flux Pens… today!
( 1 )
$13.99
Eclipse Tools Octopus Helping Hands
Eclipse Tools Octopus Helping Hands feature a clamp that will mount to the edge of the bench and help hold your project securely while you solder it together. Featuring four alligator clips as well as a magnet and magnifier arm, this set of helping hands is sure to help get your projects around the shack finished. The clamp will securely attach to a 1.5 in. thick bench.
( 1 )
$12.99
American Beauty Alligator Heat Sinks
American Beauty alligator heat sinks are an easy and affordable measure to protect heat-sensitive components from thermal damage. While many electronic parts are fairly impervious to heat generated in the soldering process, many other components, especially semiconductors and ICs, are not. For them, extra care must be taken. Offered by American beauty in three styles, their heat sinks can draw heat away from large and tiny parts alike. Their Micro alligator clip heat sink has the tiniest jaws. They are perfect for gripping even the smallest parts. Their oversize pinch-pads make the Micro Alligator Clip easy to squeeze and maneuver. Their standard Alligator Clip heat sinks are of the typical toothed alligator-clip style, but also incorporate larger pinch pads. For the largest soldering work, American Beauty has introduced their "Alligator Clip with Barrel" heat sink. This is a standard heat sink but has an integrated barrel connector suitable to accept 4mm (0.160 in.) banana plugs. You may attach bare banana plugs or banana plugs combined with wires, metal rods, braids, or other heat-sinking masses to increase the capacity of the heat sink. When finished, simply unplug the banana plug and return the heat sink to normal. American Beauty has been in the soldering-tools business since the early 1900s. They know their stuff! When you need to buy soldering tools or supplies, including American Beauty Heat Sinks, think DX Engineering!
Not Yet Reviewed
$12.99
American Beauty Tip-Cleaning Sponges
Are you in need of a new sponge for your tip-cleaning station? American Beauty tip-cleaning sponges are just the ticket! These high-on-quality sponges are free from contaminants and are resistant to fraying. Available for your "One Pass," "Well-Type" tip-cleaning stations, DX Engineering American Beauty tip-cleaning sponges will keep your station up and running.
Not Yet Reviewed
$16.99
Eclipse Tools Desoldering Station Replacement Tips
Eclipse Tools Desoldering Station Replacement Tips are used for desoldering medium and large through-hole components from printed circuit boards. High-quality plating ensures long tip life and a low carbon steel insert prevents wear due to cleaning. Order a set of Eclipse Tools Desoldering Station Replacement Tips from DX Engineering today! Includes: * 1 - 0.047 in. (1.2mm) * 1 - 0.039 in. (1.0mm), * 1 - 0.059 in. (1.5mm)
Not Yet Reviewed
$14.49
DX Engineering Heat Shrink Self-Solder Wire Splice Connectors
DX Engineering Heat Shrink Self-Solder Wire Splice Connectors provide an easy way to make permanent, waterproof electrical wire connections. Also known as butt-splice connectors, they come in four color-coded sizes to cover wire sizes from 10 to 26 AWG (6.0 sq. mm to 0.2 sq. mm), available in 10, 25 and 50 count packs of each size, and in variety packs of all sizes in 6, 10 and 20 count of each size. Also including internal flux, these connectors let you quickly, easily and securely solder and weather seal insulated wire splices with no more than a heat gun! No crimping tool required. Make permanent splices with DX Engineering Heat Shrink Self-Solder Wire Splice Connectors. Innovative wiring solutions are available from DX Engineering. Order your packages today.
( 10 )
$10.99
—
$16.99
DX Engineering BNC Male RG-174 Coaxial Connectors
DX Engineering BNC Male RG-174 Coaxial Connectors are made specifically for use on DXE-RG-174V, RG-174, and other cables with a 0.110 OD jacket, 0.060 OD dielectric and 26 AWG center conductor. This high quality BNC male terminates RG-174 cable with a crimped shield, soldered center pin type connector that features a nickel plated body and shell, PTFE dielectric, silicone O-ring and gold plated center pin.
Not Yet Reviewed
$19.99
Times Microwave Systems® Coaxial Connectors
Times Microwave Systems Coaxial Connectors are innovative designs of the highest quality. Using genuine LMR® connectors and tools will assure reliable connections and quality you can trust. Times Microwave Systems LMR connectors are designed to work perfectly with LMR cables, so choosing and using Times connectors and termination tools assures reliable connections and puts Times quality you can trust to work for you. Although LMR cables through LMR-400 work with just about any manufacturer's connectors, LMR-600 cable requires Times Microwave Systems coaxial connectors. Order your cable and quality Times Microwave Systems Coaxial Connectors from DX Engineering! LMR® is a registered trademark of Times Microwave Systems.
( 38 )
$10.39
—
$19.69
DX Engineering OEM DC Power Connectors
DX Engineering OEM DC Power Connectors are the special "Thread Lock" screw-on connector version that is made to fit DX Engineering devices. This type of DC connector plugs in, screws on and stays on, so it can't be accidentally disconnected. DXE-DCTL-DX-2 is a two-pack of the "barrel style" cable mount power connectors with a solder tabs for your polarized two-conductor DC wire. DXE-PW18 Power Wire, a red and black zip cord sold by the foot, is a great choice for these connectors which handle up to 5A at 12 Vdc. NOTE: If you need standard 2.1 mm connectors, order DXE-DCTL-21-4 instead. With a center pin receptacle at just over 2.0 mm, DXE-DCTL-DX-2 screw-on mating connectors fit snugly onto only the DX Engineering products that run on 13.8 Vdc, typically under 2A. Compatible DX Engineering products include: DXE-ARAV3-1P at DXE-FVI-1 DXE-ARAV4-1P at DXE-FVI-1 DXE-CC-4SQR DXE-CC-8A DXE-CC-8AMOD DXE-DMC-2 DXE-DVA series at DXE-EC-DVA DXE-EC-4 DXE-EC-8 DXE-EC-DVA DXE-EC-PS2 DXE-EC-PS3 DXE-FVI-1 DXE-NCC-1 DXE-NCC-2 DXE-PS-2B at DXE-EC-PS2 DXE-PS-3B series at DXE-EC-PS3 DXE-RCA8 series at DXE-CC-8AMOD DXE-RFS series at DXE-EC-4 DXE-RPA-1 DXE-RPA-1PLUS DXE-RPA-2 DXE-RR8 series at DXE-CC8A and DXE-EC8 DXE-RTR-1 DXE-RTR1A DXE-RTR-2 DXE-TFS4 series at DXE-EC-4SQR DXE-TVSU-1 DXE-TVSU-1A DXE-TVSU-1B
( 1 )
$17.49
DX Engineering Pre-Assembled Premium Antenna Wire Kits
DX Engineering Pre-Assembled Premium Antenna Wire Kits come with a set of 2 14 AWG stranded copper antenna wires with a UV-black relaxed PVC jacket for flexibility and strength. Crimped and soldered 1/4 in. ring terminals are pre-installed on one end of each wire for convenience. These Premium Antenna Wire kits are a component of and direct replacement for DX Engineering's Single-Band Dipole Kits. They are an excellent starting point when building your own dipole antennas. These wires are supplied long so the lowest or any frequency of the desired band can be cut to resonance or lowest SWR. Antenna wire kits are available in specific lengths that cover the 160, 80/75, 60/40, 30/20/17 and 15/12/10/6 meter bands.
( 5 )
$19.99
PanaVise Vise Accessories
PanaVise vise accessories offer hundreds of uses that are limited only by your imagination. PanaVise accessories will make any project easier to handle. If you already own a PanaVise, you know that PanaVise products are better than having a third hand! The PanaVise brand features an extensive variety of state-of-the-art, work-holding accessories. PanaVise vises extend their flexibility by the use of a series of interchangeable components comprised of heads, bases, and base mounts. You may mix and match these accessory components yourself; meeting YOUR specific needs. Choose an accessory head, base, and base mount to create or modify your own flexible PanaVise work station--one that is perfectly adapted just for you! Your present PanaVise can benefit from an accessory upgrade! You may even find repair kits and replacement parts for your existing PanaVise workstation. Check out the huge assortment of PanaVise products available from DX Engineering! If you often work with items that require access from many different angles, but still require unwavering stability, PanaVise accessories can help provide that rock-steady third hand you've always been missing!
Not Yet Reviewed
$18.99
DX Engineering Wire Antenna End Insulators
DX Engineering Wire Antenna End Insulators are so unique that they are patented. They feature a unique serpentine wire grip for DX Engineering's insulated antenna wires and for our high-strength, high-power 300 ohm ladder line when used as a folded dipole. The serpentine wire grip and loop method is strong enough to support the antenna wires with no soldering of the wire required. This allows for fast and easy field adjustments of antenna length! The DXE-UWA-END-KIT includes eight of these unique insulators, which make them ideal add-on package to create multiple wire fan dipoles from a single UWA-KIT. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Many hams enjoy building, testing and experimenting with wire antennas. Make your own experimentation easier with DX Engineering Wire Antenna End Insulators!
( 32 )
$13.99
DX Engineering Coaxial Cable Grippers
DX Engineering Coaxial Cable Grippers are a great new way to hold coaxial cable firmly, while you prepare it for connectors. This pair of innovative tools was especially designed to provide a dramatically improved grip on DXE-8U, DXE-400MAX, DXE-11U, DXE-213U, standard RG-8 or other RG-8U size (0.405 in. nominal) coaxial cables. Our cable grippers are ideal for use with the DXE-UT-8213 Coaxial Cable Preparation Tool and the DXE-UT-80P and DXE-UT-80N Connector Installation Tools for two-piece solder-on PL-259 and Type N Connectors. On the outside of these tools their bumpy finish helps you maintain a sure grip on the coaxial cable being prepared. Inside, their grooved surfaces grab the coaxial cable safely and allow a sure, non-slip grip every time. The two halves of these tools fit together with hinges and a strong steel spring that aids in grip and alignment. These patent pending red DXE-CGH-8U cable grippers are custom made to fit around and help you hold RG-8U size coaxial cable (about 0.405 in. outside diameter) when using a wide variety of cable and connector tools as well as when soldering connectors. They are also excellent to use when installing crimp connectors. Our green patent pending DXE-CGH-8X cable gripper is excellent for gripping DXE-8X, RG-58 or any similar (about 0.240 in. outside diameter) cables. It's also a perfect match for our DXE-UT-808X cable stripper and DXE-UT-80P and DXE-UT-80N Connector Installation Tools. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Make it easy to hold the coax while you are preparing it for and installing connectors. Order these DX Engineering Coaxial Cable Grippers today and get a grip… on your coaxial cable!
( 43 )
$16.99
—
$19.99
DX Engineering Coaxial Connectors
The DX Engineering Coaxial Connectors shown here include two-part, silver-plated PL-259 and Type-N connectors designed to be crimped or soldered to the shield and soldered to the center conductor. These connectors deliver excellent performance for HF, VHF, and UHF applications. DX Engineering's PL-259 and Type-N connectors feature silver-plated brass throughout the outer and inner conductors and use PTFE dielectric—the best RF insulator—for very low loss and high electrical breakdown strength. Also available are DX Engineering Silver-Plated Reducers, which adapt standard solder-type PL-259 and Type-N connectors for use with single-shield RG-8X and RG-58U coaxial cables. While many types and grades of coaxial RF connectors are offered on the market, DX Engineering provides only top-quality connectors with silver-plated brass bodies and PTFE dielectric. These two-part solder-style connectors fit RG-213, RG-8U, RG-8X/LMR240 and other standard 0.405 in. single-braid shield coaxial cables intended for soldering*—but not 400MAX or LMR-400 double-shield cables. These solder-shield and solder-center connectors are the preferred choice for many Amateur Radio operators installing single-braid shield coaxial cables. Order your DX Engineering Coaxial Connectors and Reducers today! *NOTE: To prevent noise issues, modern engineering practice has determined that double shield cables that have one foil and one braid should not be soldered to the braid, including DXE-400MAX and LMR-400 style cables. Those cables should be terminated with crimp shield or clamp shield style connectors, also available from DX Engineering.
( 115 )
$11.99
—
$13.29