Availability
6 Results Found For "telescoping"
DX Engineering Aluminum Tubing
DX Engineering High-Strength Aluminum Tubes are ideal for your antenna building projects. It is made available in sizes that fit into and over the next, with close tolerances specifically designed for strength when joined and overlapping only by a few to several inches, to build Yagi, Moxon or vertical antenna elements. NOTE: This tubing is NOT intended for each size to telescope completely into the full length of the next; it cannot be used for telescopic mast building. DX Engineering aluminum tubing is manufactured to very close tolerances. This provides the greatest amount of surface contact between nesting tubes for mechanical and electrical stability. Due to the close tolerance, any burrs, dirt, grit or other foreign material, as well as dents, dings and unseen bending or crushing suffered during shipment will cause binding that prevents this aluminum tubing from fully nesting. 6063-T832 seamless drawn aluminum tubing is available in 3, 6 and 12 ft. lengths. 6063-T832 tubing provides good resistance to general corrosion, including stress corrosion cracking, and an excellent surface appearance. Use a series of 3 ft. lengths to build an element that tapers more quickly for lower wind-resistance applications. Use a series of 6 ft. lengths to make an element that tapers more slowly for greater strength and bandwidth. The 12 ft. lengths are great for HF Yagi construction. Most sizes (except 12 ft.) are available slit on one end for use with DX Engineering stainless steel element clamps. If un-slit ends are required for your applications, merely insert the slit end into the next larger size in the stack and use your own attachment method. 6063-T832 tubing features a 0.058 in. wall thickness and is available in 1/8 in. increments from 3/8 in. to 2-1/8 in. O.D. 3003-H14 drawn aluminum tubing features a 0.035 inch wall thickness and a 1/4 inch outside diameter. Each piece is supplied with non slit ends and is available in both 3 foot and 6 foot lengths, making them ideal for your antenna building projects. If your setup requires maximum strength at very long assembly lengths, then choose DX Engineering 6061-T8 tubing. This heavy-duty version features a 0.120 in. wall thickness and is available in 1/4 in. increments from 1-1/2 in. to 3 in. O.D. Packaged shipments of 6 ft. tubing have oversize shipping fees, regardless of the number of 6 ft. pieces. Therefore, order more 6 ft. pieces to spread oversize fees over more tubing for a more cost effective shipment. Tubing that is 12 ft. long MUST be shipped by truck freight. If you need many pieces of the same size in a 12 ft. tube length, then buying DX Engineering High-Strength Aluminum Tubing Bundles (elsewhere in our catalog) maximizes the economy of scale for your shipping costs. NOTE: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Order DX Engineering High-Strength Aluminum Tubing here.
( 136 )
$10.99
—
$19.49
DX Engineering Guy Rings
DX Engineering Guy Rings advance the art of stabilizing vertical rigid telescopic tubing. These newly engineered and incredibly strong Guy Rings are intended for rope guying DX Engineering, Hustler, and all brands of aluminum tubing vertical antennas, as well as the DX Engineering Telescoping Fiberglass and Aluminum Tubing Kits. Unlike the other guys' rings, DX Engineering Guy Rings have smoothed holes with no sharp edges, protecting your directly threaded ropes. Six 5/16 in. diameter attachment holes allow guy ropes to be properly spaced for three or four way guying systems. DX Engineering Guy Rings are made from the super strong, black UV resistant, glass-reinforced poly-resin material that was introduced with DX Engineering's Universal Wire Antenna Kits EZ-BUILD™ UWA Center-T and End Insulators. They are virtually impervious to extreme outdoor conditions and mechanical stress. If you have a DX Engineering wire antenna or UWA Kit, you will know that these Guy Rings are made to last and will set a new standard in rope guying attachments. With their 1/2 in. thick center hole shoulder, these Guy Rings simply slide over their respective tubing size and seat firmly against the top of the larger tubing section below. Three kits with eight sizes provide rope guying for a myriad of vertical tubing installations: - DXE-GR-2P has two guy rings that fit onto the trap tubing of the Hustler BTV Series Vertical Antennas - DXE-GR-4P has four larger guy rings for Heavy Duty Telescoping Fiberglass sets or aluminum tubing - DXE-GR-5P is the original set with sizes for Standard Telescoping Fiberglass sets or various sized aluminum tubing DX Engineering Guy Rings are so handy and inexpensive that you can have a set on hand, ready for your next antenna project. Order yours today!
( 87 )
$10.29
DX Commander EzyClamp Replacement Mast Clamp Kits
DX Commander EzyClamp Replacement Mast Clamp Kits serve as direct replacements for the mast clamps originally supplied with the DX Commander Telescoping Masts and come packaged with the proper size and quantity of clamps needed. These replacement clamps are constructed of durable Nylon 66. When properly installed and torqued at the bottom of each telescoping section, they ensure that each mast section will not compress under pressure. EzyClamps features an 8mm hex, however the Expedition clamps feature a wing nut style thumbscrew. Additional Features and Specifications: * Adjustment – 8mm (approx. 5/16 in.) Hex Screw (Expedition clamps include a wing nut) * Max Torque – 2.0Nm * Band Width – 0.50in. – (12.7mm) * Operating Temperature – Max Long term Temp 257°F (125°C) – Occasional Peak Temp 302°F (150°C) * Material - Nylon 66 * RoHS Compliant * No Hazardous Materials * Flammability - UL 94 V-2 * Minimum Tensile Strength - 359lbs/163kg/1600N * Continuous Load - 20lbs/9.1kg/89N
( 8 )
$15.99
—
$18.99
Sangean ANT-60 Retractable Antennas
Greatly improve your AM and shortwave reception with one of these Sangean ANT-60 Retractable Antennas. These portable shortwave antennas connect to your radio's external 3.5mm AM antenna jack or to the telescopic antenna with the included antenna-clip adapter. Because of the antenna clip, these shortwave reel antennas are compatible with all shortwave and world-band radios. When fully extended, these antennas reel out to an amazing 23 ft. length! You may use ANT-60 shortwave-radio antennas indoors or out. They're great for camping, traveling, chasing DX, or just boosting weak stations! If you like to listen to shortwave, but have always wanted to hear more stations with your portable receiver, just contact DX Engineering for one of these Sangean ANT-60 Retractable Antennas and open your shortwave "door to the world" even wider! ANT-60 Retractable Antenna features and benefits: * Greatly improves reception * Snaps onto existing telescoping antenna * Plugs into radio's external AM antenna jack (3.5mm mono plug) * Portable for indoor/outdoor use * Suitable for all kinds of shortwave radios * Antenna maximum length: 23 ft. * Not designed to be used for transmitting
( 1 )
$17.99
Chelegance JMount-336 Triple Magnet Mobile Antenna Mounts
Chelegance JMount-336 Triple Magnet Mobile Antenna Mounts feature a spring-loaded tri-magnet base with three powerful 3.5-inch magnets, ensuring a secure grip on your vehicle—even on curved surfaces, while the spring-loaded tri-magnet base absorbs shock for stable antenna performance. Designed with smooth, rounded edges, the JMount-336 ensures comfortable, abrasion-free installation. Its premium finish not only enhances corrosion resistance but also delivers a sleek, professional appearance that complements any setup. When paired with the optional Chelegance NCE-CH0020012 3/8-24in. to M10 threaded antenna adapter (sold separately), this mount supports a wide range of antenna whips and telescopic antennas, including the MC-750. Additionally, the JMount-336 is compatible with a variety of other mobile antenna mounts, making it a versatile choice for diverse installation needs.
Not Yet Reviewed
$15.99
CAIG Cleaning Cloths
When looking for a soft cloth to clean electronics or other delicate surfaces, turn to CAIG Laboratories cleaning cloths. CAIG cleaning cloths are available as lint-free or microfiber and are safe for all surfaces. These optical-grade microfiber cloths are the perfect wipes for cameras, telescopes, binoculars, spectacles, range finders, and all other optical equipment. Order CAIG Laboratories Cleaning Cloths from DX Engineering to keep your equipment and optics smudge and dirt free!
Not Yet Reviewed
$12.95