Availability
15 Results Found For "in-line"
ICOM Base Station Speakers
Designed for use with a wide variety of communication equipment from various makers, you may optimize your audio with ICOM Base Station Speakers. Top-of-the-line base station speakers improve listening and intelligibility. They may remove some of the strain of chasing weak signals or sorting out pileups. That will reduce operator fatigue. These are incredibly great-sounding speakers that feature distinctive styling and finishes to enhance your station and its transceivers. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For effective communications discover the crisp, clean sound of ICOM Base Station Speakers, available from DX Engineering!
( 66 )
$177.99
—
$209.99
Clearance
Phonema Miranda S Speakers
Phonema Miranda S Speakers are designed to deliver high-quality audio with special attention to the intelligibility of SSB signals. The high-quality wide range driver is specifically positioned into a custom designed medium density fiber cabinet which is lined internally with a variety of specially selected acoustical foam materials. The resulting sound of Miranda S is clear and sharp, with a frequency response that makes it easy to understand both voice and CW signals. Bass is present and well controlled when listening to broadcast signals. The midrange curve suits voice frequencies so that they stand out above the QRM, all with the warmth of a hand-crafted wooden speaker that reduces listener fatigue. The Miranda S is a gorgeous looking and great sounding speaker that is perfect for many new and old transceivers. This 8-ohm speaker is a convenient size that matches the listed rigs, but it will work for virtually any radio. The rich and articulate sound is perfect for listening to your transceiver or receiver. Miranda S Speakers offer these features: * Speaker Cabinet Material: MDF (medium density wood fiber) * Internal Materials: Acoustic Foam AG150 and Basotect * Pull-out Bail under the front to adjust height and angle to match radio * Power Handling: 10 w * Impedance: 8 ohms * Frequency response: 80 - 18,000 Hz * Sensitivity: 83 dB * Driver protection: IP64 * Input, rear panel: Mono 3.5mm jack * Dimensions (WHD): 6.02 x 3.98 x 10.04 in. (153 x 101 x 255 mm) * Weight: 3.48 lbs. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Phonema has gained an excellent reputation for quality and value. Order Phonema Speakers from DX Engineering and discover the difference a quality speaker can make!
( 7 )
$241.99
$217.79
—
$241.99
Heil Sound HPS-5 Powered Speaker
The Heil Sound HPS-5 Powered Speaker is a great sounding stand-alone speaker with a built-in 24-watt, two-way, ultra-low distortion amplifier. It drives a specially designed 5 inch low-frequency speaker with a 3 inch magnet assembly mounted in a resonant sealed enclosure. A passive extended crossover drives a 2 inch high-frequency tweeter. A mono 1/8 in. miniature (3.5mm) input jack is for connection to any transceiver external speaker or line level output jack. Since this is a mono powered speaker, any stereo audio device may be connected with the appropriate stereo to mono adapter. The HPS-5 is a companion piece for use with the Heil Sound PRAS-EQ Parametric Receive Audio System Equalizer, which together provide superb audio without distortion. The balanced audio XLR-to-XLR cable to connect the PRAS-EQ to the HPS-5 is supplied with this speaker. This powered speaker has a rear panel 2 amp fuse and a 2.1mm input for the included 12 Vdc 2 amp power supply. The dimensions of the Heil Sound HPS-5 are 7 x 9 x 6 in. (WHD).
( 14 )
$199.00
West Mountain Radio CLRdsp ClearSpeech® Noise Reduction Processors
West Mountain Radio CLRdsp ClearSpeech® Noise Reduction Processors are designed to be installed between your radio and your favorite passive external speaker or amplified speaker. Complex DSP algorithms filter all of the noise content of the incoming signal and greatly attenuate or completely remove hum, hiss, vehicle ignition, and power line noise, as well as heterodynes. The result: the ability to hear voice and CW audio clearly, with over 85 percent of the noise removed. These units have a convenient volume-control knob that allows a user to adjust the speaker audio level for comfortable listening. This allows the radio's AF Gain control setting to be optimized for other uses, such as interfacing to a West Mountain Radio RIGblaster sound card interface. Features include: * Amplifier for speaker or headphone with volume control * ClearSpeech® adaptive DSP noise reduction for voice and CW * Recognizes intermittent nature of CW and allows it to pass noise-free * Adjustable noise reduction control * Tone control * 11W watt (into 4 ohms) power amplifier * Sturdy aluminum case--ideal for mobile operation, as well as home station * Powerpoles plug into any 12V supply * Plugs into the speaker or headphone output on the radio * 1/8 in. phone jack on rear can drive external 8 or 4 ohm loudspeaker or amplified computer speakers * On/off switch with green indicator LED * Red LED flashes to indicate digital overload clipping Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. You've heard about DSP and how it helps to get those DX QSOs in the log book. Now experience it first hand with West Mountain Radio CLRdsp ClearSpeech® Noise Reduction Processors from DX Engineering!
( 28 )
$219.95
Heil Sound Pro Set Elite Headsets
Heil Sound Pro Set Elite Headsets are the ultimate boom-mic headsets designed for Amateur Radio operators using the Heil HC 6 wide-response microphone element. The microphone technology of the Heil HC 6 is designed for full-range commercial AM or FM network broadcasts, or it may be adjusted for bright, articulate audio to cut through Amateur Radio noise and signal pileups. Pro Set Elite headsets contain specially-designed high-performance dynamic elements that compliment advanced audio adjustability of modern Amateur Radio transceivers. The -3 dB points are fixed at 80 Hz and 12.5 kHz. Pro Set Elite Headsets offer round, over-the-ear cushioned pads with highly efficient speakers mounted in acoustically-tuned chambers. They seal the ears into their chamber and facilitate a high rejection of outside noise. An exclusive Heil phase-reversal switch allows the user to move the signal acoustically, which creates a spatial widening of the sound field. That makes it easier to 'see' a signal inside of a pileup while helping to remove listener fatigue during prolonged use. The headphone's speakers fold up for easy transportation and storage. Field-replaceable cushioned ear pads also come with cotton covers that can be easily removed for washing. Their 6 ft. coiled cable terminates in a 1/8 in. mono plug for the microphone and a stereo 1/8 in. plug for the headphone speaker connection. A 1/8 in. to 1/4 in. headphone jack adapter is also supplied. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Pro Set Elite Headsets work with all Heil AD-1 adapter cables, which mate with just about every type of amateur radio transceiver. Purchase an AD-1 series Headset Adapter Cable (sold separately) for a simple connection to the transceiver mic input. The adapter is 6 in. long and has a 1/8 in. female input jack for the headset boom microphone and a 1/4 in. female for the PTT (push to talk) line for the Heil foot or hand switch. The headset stereo plug goes into the headphone jack on the transceiver front panel. You deserve the quality and versatility of superior headsets. Heil Sound Pro Set Elite Headsets from DX Engineering will help you log the rare ones!
( 23 )
$229.00
Heil Ham Radio BM-17 Lightweight Headsets
The redesigned Heil Ham Radio BM-17 Lightweight Headsets are excellent for portable operations, with several updates including the new swivel-mounted boom that allows operators the flexibility of positioning the microphone on the left or right side. These headsets are available as either the BM-17S single-side or BM-17D dual-side model and are now only available in standard black, with "Heil Ham Radio" brand. To accommodate different transceivers, both models of the BM-17 are available with either a Dynamic element or an iC Electret element. The speakers used in the BM-17 headset are extra sensitive, so they do not require much AF drive from the transceiver. Their frequency response is 200 Hz – 5 kHz with exceptionally low distortion and each features replaceable ear pads made of acoustic foam. Heil Headsets feature two different mic elements, so they must be paired with the appropriate Heil AD-1 series transceiver mic adapter cable (not included). • The BM-17 Dynamic headset uses the dynamic element designed specifically for communications use, with an operating frequency response of 120 Hz – 10 kHz. This 500 ohm dynamic element will work on most amateur radio rigs requiring a Low-Z input impedance (usually between 150 ohms and 4k ohms). Legacy transmitters and transceivers that require a high impedance microphone input of 10k to 30k ohms can be accommodated with a Heil XT-1 impedance matching transformer. • The BM-17 iC Electret element works with virtually all Icom rigs and were specifically made to provide the best audio solution for the low microphone gain audio characteristics of most "pre-PRO" and basic Icom rigs. The iC element has an operating frequency response of 35Hz – 12kHz. The -3 dB points are fixed at 100 Hz and 12 kHz with the sensitivity of -57 at 600 ohms output centered at 1 kHz. The iC element requires + 5 Volts DC bias power to operate. The microphone audio for the BM-17 series terminates into a red 1/8 in. mono plug while the headphone terminates into a black 1/8 in. stereo plug (1/8 to 1/4 in. adapter included). The use of the AD-1 series mic adapters allows simple interface with popular transceiver inputs. The AD-1 series adapters are 6 to 8 in. long and has a 1/8" female input jack for the headset microphone while the 1/4" female that exits the adapter is the PTT (push to talk) line for a Heil foot switch or hand switch. The 1/8" or 1/4" stereo plug goes into the headphone jack on the transceiver front panel. The stainless steel band inside the padded top can be reshaped for a comfortable custom fit. NOTICE: Some state laws prohibit the use of headsets while operating a vehicle. Please check with your local regulations and restrictions prior to usage of this product while operating.
( 8 )
$165.00
—
$169.00
West Mountain Radio ClearSpeech DSP Noise Reduction Speakers
West Mountain Radio ClearSpeech DSP Noise Reduction Speakers contain West Mountain's ClearSpeech noise reduction circuit and an audio amplifier. They are extremely effective in improving communication clarity, making mobile and base operation less fatiguing and more fun. These speakers may be mounted in any location—they can rest on a tabletop or mount to any surface. Their included mounting bracket has two holes for mounting, and side-located adjustment knobs permit tilt aiming. Features include: * Amplified loudspeaker with ClearSpeech adaptive DSP noise reduction for voice and CW * Recognizes intermittent nature of CW and allows it to pass noise-free * Continuously variable adaptive filter noise reduction, 0 bB to -17 dB * Contains a 4 in. loudspeaker with 10 watt amplifier * Volume control knob for adjustment of internal speaker sound level * Front mounted 1/8 in. stereo output jack for powered speakers or 16 ohm or higher headphones * On/off switch with green indicator LED * LED flashes red to indicate digital overload clipping * Small, lightweight; includes mounting bracket * Powerpole equipped cable plugs into any 12 V supply Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Why not combine DSP with a high-quality communications speaker? Order West Mountain Radio ClearSpeech DSP Noise Reduction Speakers from DX Engineering to hear the difference DSP technology can make!
( 20 )
$219.95
Heil Sound Pro Set Elite iC Headsets
Heil Sound Pro Set Elite iC Headsets are excellent boom-mic headsets are designed for Amateur Radio operators using a transceiver that can benefit from the use of a high energy electret element . The new technology of the Heil IC element is designed for full-range commercial AM or FM network broadcasts or can be adjusted for bright, articulate audio to cut through Amateur Radio noise and signal pileups. Pro Set Elite iC headsets contain the special high performance electret condenser, which was designed for the low-level mic inputs used in many ICOM Amateur Radio transceivers. Their -3 dB points are fixed at 80 Hz and 12.5 kHz. The iC electret element requires +5V DC phantom power, which all ICOM rigs provide. Pro Set Elite iC headsets offer dual side, highly efficient speakers mounted in acoustically tuned chambers, the isolation of which produce a high rejection of outside noise. An exclusive Heil phase reversal switch allows the user to move the signal acoustically, which creates a spatial widening of the sound field. That makes it easier to 'see' a signal inside of a pileup, while removing listener fatigue during prolonged use. Pro Set Elite speakers fold up for easy transportation and storage. Field-replaceable cushioned ear pads also come with cotton covers that can be easily removed for washing. Their 6 ft. coiled cable terminates in a 1/8 in. mono plug for the microphone and a stereo 1/8 in. plug for the headphone speaker connection. A 1/8 in. to 1/4 in. headphone jack adapter is also supplied. Purchase an AD-1 series Headset Adapter Cable (sold separately) for a simple connection to the transceiver mic input. The adapter is 6 in. long and has a 1/8 in. female input jack for the headset boom microphone and a 1/4 in. female for the PTT (push to talk) line for the Heil foot or hand switch. The headset stereo plug goes into the headphone jack on the transceiver front panel. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Give your ICOM transceiver the quality headset it deserves. Order Heil Sound Pro Set Elite iC Headsets from DX Engineering to improve your TX and RX audio!
( 22 )
$229.00
Yaesu M-90MS Microphone and Stand Mounting Kits
Yaesu M-90MS Microphone and Stand Mounting Kits bring the great Yaesu microphone sound to your boom or mic stand, for a completely new way to enjoy your Yaesu transceiver. The Yaesu M-90MS microphone head utilizes a finely tuned dynamic element to deliver rich low to mid-frequency response, desirable for a clear and concise conversational sound that is pleasing to the ear of the listener. The oversize dynamic microphone element and windscreen of the M-90MS is designed to accentuate voice input from the front and limit ambient noise and sounds from the side. The attached microphone cable features a PTT hand switch with an 8-pin modular connector termination. The M-90MS may be used with virtually any Yaesu HF transceiver* with some models requiring the optional SCU-53 8-pin modular jack to 8-pin round plug adapter**. For difficult band conditions, a built-in low-cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave). An integrated isolation transformer enhances the audio quality of this fine microphone. Yaesu M-90MS microphone specifications: Microphone type: Dynamic element, preamplified Supply voltage: 5.0 V DC ±10 percent (supplied by most Yaesu transceiver mic connectors*) Frequency response: 30 to 17,000 Hz Sensitivity: -60 dB (1 kHz 0 dB=1V/1Pa) Microphone impedance: 600 ohms Dimensions: Diameter: 2.45 in. (62mm), Length: 6.38 in. (162mm) Weight: 7.05 oz. (200 g) with bracket, without cable NOTE: The M-90MS includes the boom or stand mount bracket. A boom or mic stand are not supplied. The M-90MS microphone head does not have a detachable connector. The Yaesu M-90MS comes with the PTT hand switch and 8-pin modular connector cable that is directly compatible with the FTDX10, FT-991A, FT-891, FT-450/D, FT-897/D, FT-857/D, FT-18ND, FT-817/ND, and FT-900. ** SCU-53 8-pin modular jack to 8-pin round plug adapter is required for use on FTDX101 Series, FTDX5000 Series, FTDX3000/D, FTDX1200, FTDX9000 Series, FT-2000/D, FT-950, FT-920, FT-1000MP, FT-1000MP MARK-V, FT-1000MP MARK-V Field, and FT-847. *Optional Power Supply Kit ABB19X001 and SCU-53 are required for M-90MS use with Legacy Yaesu FT-1000, FT-990, FT-890, FT-840 and FT-747 transceivers.
( 5 )
$169.99
PRYME HLP-SNL Series Mobile Radio Headsets
PRYME HLP-SNL Series Mobile Radio Headsets are over-the head style padded headsets with a noise reducing flex-boom microphone. These new headsets are lightweight and extremely comfortable to wear. The high-quality metal spring headband is covered by replaceable padding for continued maximum comfort. Their special high-impedance speaker delivers superb audio and features a leatherette ear pad that may be easily replaced if damaged or worn. HLP-SNL series headsets are recommended for users who prefer an over-the-head style headset such as dispatchers, Amateur Radio operators, retail/restaurant operations, movie/TV sets, and hospitality, entertainment and industrial users. HLP-SNL Series features: * Lightweight over-the-head headset * Padded, adjustable metal headband (and the padding is replaceable) * Adjustable padded T-bar (stabilizes non-speaker side against users head) * Adjustable speaker housing assembly (for large or small heads) * Replaceable leatherette speaker cushion * Flexible metal boom microphone * Boom rotates to allow use on either ear * Noise-reducing condenser microphone element * Rugged in-line PTT switch with heavy duty rotating clip * Reinforced strain reliefs at all cable attachment points Whether you are using a headset at home or for hands-free convenience in the car, check out one of these PRYME HLP-SNL Series Mobile Radio Headsets. They're now available from DX Engineering!
Not Yet Reviewed
$129.99
—
$132.99
PRYME HLP-SAL Series Mobile Radio Headsets
PRYME HLP-SAL Series Mobile Radio Headsets are over-the head style padded headsets with a noise reducing flex-boom electret microphone. These new headsets are lightweight and extremely comfortable to wear. Part number HLP-SAL-M01J works with most Kenwood mobile radios. Part number HLP-SAL-M02J works with most Yaesu/Vertex mobile radios. Their high-quality metal spring headband is covered with padding for continued maximum comfort. Their special high-impedance speaker delivers superb audio and features a comfortable leatherette ear pad. HLP- SAL series headsets are recommended for users who prefer an over-the-head style headset such as dispatchers, Amateur Radio operators, retail/restaurant operations, movie/TV sets, and hospitality, entertainment and industrial users. PRYME HLP- SAL headset features: * Wired with RJ45 mic and 3.5mm speaker connections * Lightweight over-the-head headset * Padded, adjustable metal headband * Adjustable padded T-bar (stabilizes non-speaker side against users head) * Adjustable speaker housing assembly (for large or small heads) * Flexible-metal boom microphone * Boom rotates to allow use on either ear * Noise-reducing condenser microphone element * Rugged in-line PTT switch with heavy duty rotating clip * Reinforced strain reliefs at all cable attachment points Whether you are using a headset at home or for hands-free convenience in the car, check out one of these PRYME HLP- SAL Series Mobile Radio Headsets. They're now available from DX Engineering!
( 1 )
$129.99
On Sale
INRAD Desk Microphone Systems
The INRAD Desk Microphone System combines their best Dynamic Microphones with their heavy DMS-1 PTT Desk Stand and a Transceiver Adapter Cable with coiled cord that connects from the back of the base to your transceiver mic jack. Easy! These are attractive and great sounding desk mics! The combination of dynamic microphone, locking push-to-talk desk stand with sound isolating mount, mic clip and adapter cable for popular radio brands, are complete and ready to plug in and operate. Choose systems for Icom, Yaesu, Kenwood, Elecraft, TenTec and Flex Radio. Simply choose the mic you prefer with the cable for your radio! To use the same microphone with a different transceiver brand, order and plug in a different accessory cable. It that easy! Choose from these five INRAD Desk Microphone System models: -INRAD DMS-629 Represents a revolution in price versus performance for Amateur Radio microphones. Highly unidirectional cardioid dynamic microphone features a large 1.125" diaphragm for clear, full audio response. This mic features excellent articulation with a rise in response to match the characteristics of speech for superior voice intelligibility. INRAD's top of the line microphone. -INRAD DMS-650 Well-articulated overall audio with overall higher-end output punch for DX operation and for using the speech processor on the radio to drive output. A top-of-the-line mic with less low end response than the M629. -INRAD DMS-686 Excellent transmit audio response from a unique cardioid dynamic element. Compared to the M629, the M686 has a slightly elevated higher end output useful for DXing. It has a bit of lower end response as compared to the M650, to retain a well-rounded sound with punch. Black metal frame, squared off metal microphone hood. The DMS-868 is a great choice to have it 'all-in-one'. -INRAD DMS-665 Features the "retro" chrome look reminiscent of the classic Shure 565. This microphone has a little bit less high frequency output plus slightly better overall frequency response. This unique cardioid dynamic unidirectional element features a built-in spherical breath and pop filter. Sounds great! -INRAD DMS-628 Flat overall response across all vocal frequencies without any boost at specific frequencies to cut lows or highs. Excels when used with an EQ, this is a good all-purpose mic that can be used with just about any HF transceiver. Clean, clear SSB transmit audio at a nice price! These INRAD Microphones and the 2.5 pound DMS-1 PTT locking base have received an enthusiastic review in the January 2018 issue of QST magazine. The review summary: "An excellent audio signal from a reasonably-priced, high-quality microphone." Want a different on-air sound from a different INRAD microphone? The M-series microphones are interchangeable. Unplug the 3 pin XLR cable from the back of the mic and pull it off the clip. Plug in the new mic, put it on the stand. It's that simple! Plus, optional adapter cables are available separately for trying other microphone and transceiver combinations. Enjoy quality transmit audio at a very reasonable price. Order your INRAD Desk Microphone System from DX Engineering!
( 23 )
$171.90
$144.30
—
$181.90
bhi Ltd DSP Speakers
bhi Ltd designs and manufactures a range of Digital Signal Processing (DSP) noise cancelation products that remove unwanted background noise and interference from noisy voice and radio communication channels. bhi Ltd DSP Speakers are the absolute best noise elimination speakers currently available! bhi Ltd DSP noise cancelation speakers remove unwanted background noise and interference from noisy voice and radio communication channels to leave clear, intelligible speech and CW signals. Aimed at a number of different radio-related and voice communication markets, bhi products all incorporate unique, patented, DSP technology to enable clear communications in noisy environments. Shop DX Engineering for your bhi products! Their company name is bhi; all lower case. Therefore, bhi Ltd means bhi Limited, a UK business entity. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 59 )
$207.99
Heil Sound's iCM Microphones
Heil iCM microphones are high performance mics specially designed for owners of earlier ICOM transceivers that exhibit low gain in the microphone amplifier stage. Two models are available: the original Silver version and the new Black and Gold version. Not cheap electret microphones, the iCMs utilize a high-quality condenser element with a broad frequency response (35 Hz to 12 kHz) and high output that is crafted for compatibility with the ICOM transceivers. The iCM microphones were designed in close collaboration with ICOM's engineering team and are housed in a beautiful platinum-finish enclosure, making them ideal for hand-held use or for mounting on a boom or desk stand. The iCMs are shipped with microphone clips compatible with Heil Sound base stands and booms. The iCMs are fitted with an 8 ft. length of Heilwire cable terminated in an 8-pin round mic connector that's wired for the ICOM transceivers. A 1/4 in. inline phone jack accepts PTT input from a foot switch or hand switch. A "light touch" PTT switch is mounted on the body of the iCMs. Make your ICOM rig "sing" like never before with Heil iCM microphones.
( 38 )
$149.00
bhi DSP Devices
bhi Ltd designs and manufactures digital signal processing (DSP) noise cancellation products including inline units and modules. They are some of the best electronic noise elimination devices currently available! bhi DSP Devices remove unwanted background noise and interference from noisy voice and radio communication channels to leave clear, intelligible speech. Used in a number of radio-related and voice communication markets, all bhi products incorporate unique, patented DSP technology to enable clear communications in noisy environments. Shop DX Engineering for your bhi products! Their company name is bhi - all lower case. bhi Limited is a UK business entity. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 50 )
$185.99
—
$189.99