Availability
6 Results Found For "preamp"
ICOM SM-30 Desktop Microphones
ICOM SM-30 Desktop Microphones are compact, lightweight, unidirectional, electret condenser microphones. These quality desk microphones feature a selectable low cut function and a microphone output level that can adjusted by a trimmer on the bottom of the microphones. Their bases have PTT and PTT Lock switches and a red "PTT lock" lamp. The characteristics of SM-30s have been optimized for SSB and FM voice communications. These SM-30 microphones' cables terminate to standard ICOM 8 pin round microphone plugs. SM-30 Desktop Microphones may also be used with select ICOM mobile transceivers that have modular microphone jacks, using the correct adapters. (Example: ICOM OPC-589 adapter cable, 8-pin modular to 8-pin round mic receptacle) ICOM SM-30 Desktop Microphones offer the right combination of features and value!
( 52 )
$245.99
ICOM Desktop Microphones
ICOM SM-26 Desktop Microphones are new affordable ICOM desktop units for the Amateur Radio and Land Mobile Radio markets. SM-26 microphones come with an 8-pin modular-connector equipped cable and are compatible with many ICOM VHF/UHF mobile radios and repeaters. ICOM SM-26 Desk Microphone features: * 8-pin modular connector for direct connection to ICOM Radio Amateur or professional Land Mobile Radio (LMR) VHF/UHF mobile/base radios and repeaters * Unidirectional dynamic element * Built-in preamp * Microphone gain control * PTT and Monitor switches, with Monitor-Lock switch * Large switches for convenient operation * Strong, durable construction * Slim dimensions (2.64 x 6.69 x 6.57 in.) * Requires radio-supplied power ICOM SM-26 Desktop Microphones offer the right combination of advanced features and outstanding product value! Look to DX Engineering to have the audio accessories you need!
( 1 )
$149.99
Alinco EMS-98 Desktop Microphones
Alinco EMS-98 Desktop Microphones are dynamic microphones with a built-in preamplifier and adjustable mic gain using the mic gain control located on the bottom of the microphone. The EMS-98 features a PTT switch, a PTT lock switch as well as transceiver channel up/down keys. 3 different microphone cables are included making the EMS-98 compatible with the DR-735, DR-235, and DR-MD520 mobile transceivers. *Note - The EMS-98 is also compatible with the DR-138, DR438, CS10, and CS25 transceivers however, the Up/Down keys will not function properly
Not Yet Reviewed
$125.99
Yaesu M-70 Desktop Microphones
Yaesu M-70 Desktop Microphones blend classic design with 21st Century features for a stylish, self-contained and affordable cardioid desk mic for your Yaesu transceiver operating pleasure. The M-70 utilizes a directional condenser microphone element which has precisely tuned frequency response to obtain clear and crisp audio quality. Along with its built-in preamplifier, the M-70 uses three Air-Cylinder tubes, similar to the Reference Microphone M-1, to provide a solid and smooth extended operation. The M-70 has a simple one-touch PTT key lock button placed just above the PTT key for those long rag chews. This mic preamp features an isolation transformer integrated into the circuit board to enhance audio quality. Also, a built-in Low-Cut filter allows shaping of the low frequency response with a roll-off at 340Hz, -6dB/octave. An ON/ OFF sliding switch is located on the bottom of the microphone. The M-70 is compatible with all modern Yaesu HF transceivers. Both types of 8-pin mating connectors are on the rear of the M-70 base. By swapping the orientation of coiled cord with opposite connectors at each end, it connects to Yaesu radios equipped with either an 8-pin round or an 8-pin modular mic connector. * Note: A YSU-ABB19X001 Power Supply Kit (sold separately) is REQUIRED When connecting the M-70 Desktop Microphone to the following legacy Yaesu transceivers: * FT-1000/D * FT-990 * FT-890 * FT-840 * FT-747 Order original equipment Yaesu M-70 Desktop Microphones for your Yaesu transceivers from DX Engineering.
( 57 )
$159.99
Yaesu M-90D Desktop Microphones
Yaesu M-90D Desktop Microphones utilize a finely tuned dynamic element to deliver rich low to mid frequency response, desirable for a clear and concise conversational sound that is pleasing to the ear of the listener. The oversize dynamic microphone element and windscreen of the M-90D is designed to accentuate voice input from the front and limit ambient noise and sounds from the side. The attractive desk stand base of the M-90D features a large PTT bar switch, a PTT lock button, and both 8-pin modular and round connectors at the back. By swapping the orientation of the supplied coiled cord cable with 8-pin round and modular connectors at either end, the M-90D may be used with virtually any Yaesu HF transceiver*. For difficult band conditions, a built-in, low-cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave). An integrated isolation transformer enhances the audio quality of this fine microphone, which also uses three air cylinder tubes, similar to the M-1 Reference Microphone, to provide a lifetime of solid, smooth, and noiseless PTT operation. Yaesu M-90D Desktop Microphone specifications: Microphone type: Dynamic element, preamplified Supply voltage: 5.0 V DC ±10 percent (supplied by most Yaesu transceiver mic connectors*) Frequency response: 30 to 17000 Hz Sensitivity: -60 dB (1 kHz 0 dB=1V/1Pa) Microphone impedance: 600 ohms Dimensions (WHD): 4.17 x 7.56 x 4.98 in. (106 x 192 x 126.5mm) Height maximum when microphone head position is flat Weight: 18.70 oz. (530 g) without cable NOTE: The M-90D Mic head does not disconnect from the desk stand base for other uses. (See M-90MS Mic Head for boom or mic stand applications.) The M-90D is directly compatible with the FTDX101 Series, FTDX10, FT-991A, FT-891, FTDX5000 Series, FTDX3000/D, FTDX1200, FTDX9000 Series, FTDX2000/D, FT-950, FT-450/D, FT-897/D, FT-857/D, FT-818ND, FT-817/ND, FT-900, FT-847, FT-920, FT-1000MP, FT-1000MP MARK-V and FT-1000MP MARK-V Field. *Optional Power Supply Kit ABB19X001 required for M-90D use with Legacy Yaesu FT-1000/D, FT-990, FT-890, FT-840 and FT-747 transceivers.
( 46 )
$199.99
Yaesu M-90MS Microphone and Stand Mounting Kits
Yaesu M-90MS Microphone and Stand Mounting Kits bring the great Yaesu microphone sound to your boom or mic stand, for a completely new way to enjoy your Yaesu transceiver. The Yaesu M-90MS microphone head utilizes a finely tuned dynamic element to deliver rich low to mid-frequency response, desirable for a clear and concise conversational sound that is pleasing to the ear of the listener. The oversize dynamic microphone element and windscreen of the M-90MS is designed to accentuate voice input from the front and limit ambient noise and sounds from the side. The attached microphone cable features a PTT hand switch with an 8-pin modular connector termination. The M-90MS may be used with virtually any Yaesu HF transceiver* with some models requiring the optional SCU-53 8-pin modular jack to 8-pin round plug adapter**. For difficult band conditions, a built-in low-cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave). An integrated isolation transformer enhances the audio quality of this fine microphone. Yaesu M-90MS microphone specifications: Microphone type: Dynamic element, preamplified Supply voltage: 5.0 V DC ±10 percent (supplied by most Yaesu transceiver mic connectors*) Frequency response: 30 to 17,000 Hz Sensitivity: -60 dB (1 kHz 0 dB=1V/1Pa) Microphone impedance: 600 ohms Dimensions: Diameter: 2.45 in. (62mm), Length: 6.38 in. (162mm) Weight: 7.05 oz. (200 g) with bracket, without cable NOTE: The M-90MS includes the boom or stand mount bracket. A boom or mic stand are not supplied. The M-90MS microphone head does not have a detachable connector. The Yaesu M-90MS comes with the PTT hand switch and 8-pin modular connector cable that is directly compatible with the FTDX10, FT-991A, FT-891, FT-450/D, FT-897/D, FT-857/D, FT-18ND, FT-817/ND, and FT-900. ** SCU-53 8-pin modular jack to 8-pin round plug adapter is required for use on FTDX101 Series, FTDX5000 Series, FTDX3000/D, FTDX1200, FTDX9000 Series, FT-2000/D, FT-950, FT-920, FT-1000MP, FT-1000MP MARK-V, FT-1000MP MARK-V Field, and FT-847. *Optional Power Supply Kit ABB19X001 and SCU-53 are required for M-90MS use with Legacy Yaesu FT-1000, FT-990, FT-890, FT-840 and FT-747 transceivers.
( 5 )
$169.99