Availability
Meters and Test Equipment
Daiwa CN-901 Professional Series Bench Meters
Daiwa CN-901 Professional Series Bench Meters offer accurate readings, reliable performance, and great value. Daiwa's large, lighted and easy-to-read cross needle meters will provide your ham shack with consistent readings. CN-901 Series meters feature qualities that will make measuring SWR and power during an antenna test, as well as matching and tuning transmitters, an easy task. Their dual-needle meters have one scale that measures forward power while the other reads reflected power. The SWR is indicated at the crossing point of the two needles… so you can read all three of these important measurements at the same time! Their HP models can also measure P.E.P. That's peak power in SSB operation. A DC cable with 2.5mm plug is included. There are also several frequency-ranges and power levels in the Daiwa CN-901 professional series family to choose from. Note: For additional product information, please look at the files under the "Documentation" tab. For Amateur Radio operations, it's hard to beat the value and performance of Daiwa CN-901 Professional Series Bench Meters!
( 73 )
$225.95
—
$239.95
Daiwa CN-501H HF/VHF Bench Meters
Daiwa CN-501H HF/VHF Bench Meters offer high quality and are value-priced. These SWR power meters will be right at home in any ham shack. Their convenient features make measurements of SWR and power during antenna testing and tuning a much easier task. You'll be able to match your transmitter or amplifier with ease! Daiwa's lighted dual-needle meter measures forward power with one indicator and reflected power with the other. Where the needles cross is your SWR… read all three at the same time! Daiwa CN-501H HF/VHF Bench Meters offer many fine features: * For HF through 2 meters 1,500 watts * UHF (SO-239) connectors. * Frequency: 1.8-150MHz * Power Range Forward: 15/150/1.5kW * Power Rating: 1.5kW (1.8-60MHz) 1kW (144MHz) * Peak reading for SSB operation (external DC power required) * Accuracy: plus / minus 10 percent (at full scale) * SWR Detection Sensitivity: 4W minimum * Input / Output Impedance: 50 OHM * Input / Output Connectors: SO-239 * Dimensions 5in x 3in x 4in * Weight: 1lb. 8 oz. * Lighted (by external 12-14 volt supply, required for peak function) * 2.5mm DC input jack Note: For additional product information, please look at the files under the "Documentation" tab. Daiwa Economy Series HF/VHF or VHF/UHF Bench Meters from DX Engineering are a great choice for value, quality, form and function!
( 54 )
$165.95
Daiwa CN-501H2 HF/VHF Bench Meters
Daiwa CN-501H2 HF/VHF Bench Meters offer quality and performance at a reasonable cost. These cross-needle SWR Power Meters are right at home in any ham shack, with three power ranges to suit any need. Simultaneous measurements of forward and reverse power and SWR during antenna testing and equipment tuning very easy. You'll be able to quickly peak your transmitter or amplifier! Daiwa's lighted dual-needle meter measures forward power with one indicator and reflected power with the other. Where the needles cross is your SWR… read all three at the same time! Daiwa CN-501H2 HF/VHF Bench Meters offer many fine features: * HF power handling: 2,000 watts maximum * Connectors: UHF (SO-239) . * Frequency: 1.8-150MHz * Forward Power Ranges: 20/200/2.0 kW * Power Rating: 2.0 kW (1.8-60MHz) 1 kW (144MHz) * Peak reading for SSB operation (external DC power required) * Accuracy: plus / minus 10 percent (at full scale) * SWR Detection Sensitivity: 4W minimum * Input / Output Impedance: 50 OHM * Input / Output Connectors: SO-239 * Dimensions 5in x 3in x 4in * Weight: 1lb. 8 oz. * Back-lit meters with external 12-14 volt supply, 2.5mm DC input jack (also required for peak function) Daiwa Economy Series HF/VHF or VHF/UHF Bench Meters from DX Engineering are a great choice for value, quality, form and function! Note: For additional product information, please look at the files under the "Documentation" tab.
( 10 )
$167.95
RigExpert Shackmaster OSL Calibration Kits
RigExpert Shackmaster OSL Calibration Kits are valuable calibration tools designed for radio amateurs, lab technicians, and anyone looking to maintain the accuracy of their radio frequency (RF) equipment. This versatile kit is ideal for a wide range of applications, including calibrating oscilloscopes, signal generators, and antennas. The Shackmaster OSL Calibration Kits provide improved measurement accuracy, leading to more reliable test results and better overall system performance. Additionally, they help to increase efficiency and productivity by streamlining the calibration process. Whether you're a seasoned radio amateur or just starting out, the RigExpert Shackmaster OSL Calibration Kit is an essential tool for maintaining the accuracy of your RF equipment.
Not Yet Reviewed
$199.00
Daiwa 501 Series VHF/UHF Bench Meters
Daiwa 501 Series VHF/UHF Bench Meters offer high quality and are value-priced. These SWR power meters will be right at home in any ham shack. Their unique features make tedious measurements of SWR and power during antenna testing and tuning a much easier task. You'll be able to match your transmitters with ease! These meters are available with UHF or Type N connectors. Daiwa Economic Series VHF/UHF Bench Meters features and models: * Input / Output Connectors: Model CN-501V; SO-239 * Input / Output Connectors: Model CN-501VN; Type N * Frequency range: 140-525MHz * Forward Power: 20/200W * Power Rating: 200W maximum (140-525MHz) * Accuracy: Plus / minus 10 percent (at full scale) * SWR Detection Sensitivity: 4W min * Input / Output Impedance: 50 OHM * Dimensions in inches: 5 W by 3 H by 4 D * Weight: 1lb. 8 oz. * LED Lighted * 2.5mm DC input jack Note: For additional product information, please look at the files under the "Documentation" tab. Daiwa's lighted dual-needle meter measures forward power with one indicator and reflected power with the other. Where the needles cross is your SWR… read all three at the same time! Daiwa 501 Series VHF/UHF Bench Meters from DX Engineering are a great value and reflect good quality, form and function!
( 25 )
$167.95
—
$171.95
Clearance
LDG Electronics TW-1 Talking SWR/Wattmeters
LDG Electronics TW-1 Talking SWR/Wattmeters provide an aural spoken indication of power and SWR using a digitally recorded voice. It is ideal for the visually impaired or for those times when you need to look elsewhere while still obtaining power and SWR measurements. At the press of a button, the TW-1 speaks the forward power, reverse power or SWR. Three languages are available: English, Spanish and German and it includes an internal top firing speaker; no external audio hookups are needed. The TW-1 also offers a continuous tone mode for tuning. Simply press and hold the Forward button and a tone indicates power. As you adjust your amplifier or antenna tuner, a higher tone indicates higher power. This is perfect for peaking your amplifier while keeping a close watch on the grid current. You can select either long or short voice reports (verbose or terse modes). Long reports include descriptors like "thousand" or "hundred" and end with "forward watts" or "reverse watts". Short reports speak only the numerical value of the measurement you've selected for a quick reading. The TW-1 needs just 1W to operate, but will handle up to 2000W PEP, making it suitable for everything from QRP to full legal limit. The TW-1 is accurate to ± 5% of reading across the entire power range and resolution is 1W or 1% of reading (whichever is higher). The microprocessor controlled TW-1 can easily be upgraded in the field with a simple chip exchange. It requires 11-15VDC at 200mA maximum (power supply not included) but consumes minimal current when not speaking. Suitable for mobile use, simply install it in a convenient location near your operating position and provide 12VDC through a fused line (fuse not included, LDG recommends a 2 amp fast-blow fuse). SWR Tone mode is especially useful for tuning a "screwdriver" antenna while watching the road. (LDG strongly recommends that you pull over to a complete stop before adjusting your antenna) The November 2005 issue of QST Magazine features an exhaustive review of the TW-1 starting on page 77. Additional Features and Specifications: -Frequency Range 1.8-54.0MHz -Power rating: 0-2000W PEP, Auto-Ranging -Speech: Speaks Forward and Reverse power in watts, as well as SWR -Languages: English, Spanish, German -Continuous tone for making amplifier or tuner adjustments -Accuracy: ± 5% of reading across entire HF range (± 10% on 6M) -Power requirements: 11-15VDC at 200 mA Max (user supplies power source) -2x UHF female SO239 Connectors -2.5mm x 5.5mm Center Positive DC Power Jack - DC Power cable included!
Not Yet Reviewed
$219.99
$186.99
Moonraker SWR-20 SWR Power Meters
Moonraker SWR-20 SWR Power Meters are small and lightweight, perfect for your Ham Radio Go Bag. The SWR-20 features a cross needle design, measures average forward or reflected power and SWR in the 1.8 to 200 MHz frequency range, and features a selectable 0 to 15 or 0 to 150-watt power switch. Illuminate the display and make it easier to read in low-light environments by connecting the included DC cable to a 12 V DC power source. Additional Feature and Specifications: * 1.8 to 200 MHz frequency range * 50 ohms impedance * Switched power 0 to15 watts or 0 to 150 watts * Measures forward or reflected power and SWR * Sensitivity 3 watt for full-scale deflection * Accuracy 10 percent at full scale * Two SO-239 female connectors
Not Yet Reviewed
$165.99
Moonraker SWR-777 Digital Wattmeters
Moonraker SWR-777 Digital Wattmeters provide information about the state of your antenna at a glance. A color display shows the forward power as well as the current SWR and battery voltage. The color display provides a number of display options that can provide up to the minute information as to the current state of your antenna system performance. Three LED lights provide visual indication of the SWR status: the left (yellow) LED is below 1.5:1, the middle (green) LED indicates an SWR between 1.5-2.5:1, and the right (red) LED indicates that the SWR is over 2.5:1; an audible alert can also be enabled. Three buttons also are featured on the front panel; these are used to change settings on the meter. Other configurable options allow the user to adjust the meter display if they have compared the readings of the meter with a calibrated meter. The rear panel features a master power switch, two SO-239 jacks (one for the transmitter and one for the antenna) and a USB-C port for power. Covering a frequency range of 1.8 to 250 MHz and operating with a maximum power rating of 210 watts, this meter will cover the needs of most operators. This compact meter, measuring in at 3.46 in. x 2.48 in. x 1.50 in. and weighing just 6.63 ounces, is sized for use in the shack or, with its 3.7V, 1000mAh internal battery, can be used portable as well. Key Features / Technical Specifications: • Working Frequency: 1.8 - 250 MHz • Measurement accuracy in SWR: +/- 5% • Measurement Accuracy in Power: +/- 10% • Type-C power supply: 5Vdc/1A • Power Range: 0.5 - 210W • Nominal Impedance: 50 Ohms • Connector Type: SO 239 (UHF Female) • Battery Model: 3.7V/1000mAh • Package Contents: Meter and user manual • Product Dimensions: 3.46 x 2.48 x 1.50 in. (8.8 x 6.3 x 3.8 cm) • Product Weight: 188g
Not Yet Reviewed
$145.99
West Mountain Radio CBA V--Computerized Battery Analyzers
West Mountain Radio CBA V--Computerized Battery Analyzers have advanced capabilities for scientific battery performance assessment. * True constant current battery capacity test with results graphically displayed, constant power testing supported with extended software upgrade * Discharge current is software and electronically regulated using a solid-state switch and fan cooled electronic load * Test any type of battery, coin cell to automotive or larger. Presets for NiCad, NiMH, Lead Acid, Li Ion, Li Poly, Alkaline, Carbon Zinc, Mercury etc. * Solar cell profiling capability * Lower current testing capabilities--down to 10 mA * Multiple discharge tests can use watts as a parameter (CBA II/CBA III only allows current) Perform Fast, High-Power Testing * Tests quickly at real world load conditions, up to 150 watts or 40 amps maximum, whichever is higher * High voltage testing at up to 55 V (previous model CBA II/CBA III were only 48 V max.); the equivalent of 1 to 38 NiCad or NiMh cells * Perform power profile test (increase current at user's rate to see how voltage/power responds), useful for testing maximum power output of a power supply or solar cell * Optional 500 watt and 1,000 watt amplifiers Accuracy and Precision for Demanding Applications * Remote voltage sensing for higher testing accuracy * * On-board computer performs accurate measurement with 12-bit effective resolution. Auto ranging for two current ranges and three voltages * Each CBA is individually calibrated with a computerized calibration system * Calibration certification data provided with CBA V Pro * SDK for developing your own scripts or programming * TTL UART port that can be controlled by an Arduino, Raspberry PI, or other embedded system with a TTL serial port Built-in Safety Features Provide Superior Battery Protection * Improved cooling system allowing higher continuous loads for testing * * Additional LED status indications * * Fuse blown LED and easy to change fuses * * Fail safe: automatic protection of temperature, current, and power * Safety watchdog stops a discharge in the event of a computer crash * Discharge test current user selectable from 0 to 40 amps * Timed discharge test (stop discharge once certain Ah has been reached) * Dynamic test (alter test current using panel on the side of the software, without having to stop and start a new test) * Automatic voltage shut-off at end of test using a software recommended or user selected safe discharge voltage * Automatic over-temperature shut off at end of test at using a software recommended or user selected maximum temperature with optional external magnetic temperature sensor Free Standard Software for Data Analysis * User selected battery cell chemistry, number of cells, and test current * Software recommends safe tests based on user supplied battery information * Automatic graph setup and scaling * Measures and displays voltage, current, amp-hrs., and watts * User can set the criteria for "Easy-Go/No-Go" testing * Easy overlay comparisons of multiple graphs may be displayed saved and recalled * Save, display, and print battery test graphs and battery labels * Plug-and-play high-speed USB interface, with easy-to-use and intuitive Windows software supplied on CD ROM * Manage individual tests on any number of CBA V units connected to the same PC * Software has no limit on number of CBA Vs that can be attached (CBA II/CBA III required multiple unit license) * Extended Software Upgrade License unlocks features for serious battery testing
( 2 )
$189.95
Moonraker SWR-200 SWR Power Meters
Moonraker SWR-200 SWR Power Meters measure forward or reflected power and SWR using a single sweep-style meter. Switch between two inputs that cover frequencies in the HF and VHF bands. Connect your HF/VHF antenna to the SO-239 connector for the 1.8 to 160 MHz frequency range. Select between four power ranges, 5 watt, 20 watt, 200 watt, or 400 watt. This meter will display Average, Peak Power, or SWR as desired. Illuminate the display and make it easier to read in low-light environments by connecting the included DC cable to a 13.8 V DC power source. Additional Feature and Specifications: • 1.8-160MHz • 5W, 20W, 200W, 400W • Average or PEP • 13.8V DC Lamp • 6.102 x 2.480 x 4.055 in. (155 x 63 x 103mm) • 1.59lbs. (870g)
Not Yet Reviewed
$199.99
Moonraker SWR-400 SWR Power Meters
Moonraker SWR-400 SWR Power Meters measure forward or reflected power and SWR using a single sweep style meter. Their compact design makes these meters useful for testing both base and mobile installations and features coverage in the 140 to 525 MHz frequency range and switchable power handling up to 400 watts. This meter will display Average, Peak Power, or SWR as desired. Illuminate the display and make it easier to read in low-light environments by connecting the included DC cable to a 13.8 V DC power source. Additional features and specifications: * Frequency range: 140 to 525 MHz * Selectable power range: 5 watt, 20 watt, 200 watt or 400 watt (AVG/PEP) * 13.8 V DC lamp * SO-239 connectors 6.102 x 2.480 x 4.055 in. (155 x 63 x 103mm) 1.59lbs. (870g)
Not Yet Reviewed
$199.99
Moonraker SWR-40 SWR Power Meters
Moonraker SWR-40 SWR Power Meters are small and lightweight, perfect for your Ham Radio Go Bag. The SWR-40 features a cross needle design, measures average forward or reflected power and SWR in the 140 to 525 MHz frequency range, and features a selectable 0 to 15 or 0 to 150-watt power switch. Illuminate the display and make it easier to read in low-light environments by connecting the included DC cable to a 12 V DC power source. Additional Feature and Specifications: * 140 to 525 MHz frequency range * 50 ohms impedance * Switched power 0 to15 watts or 0 to 150 watts * Measures forward or reflected power and SWR * Sensitivity 3 watt for full-scale deflection * Accuracy 10 percent at full scale * Two SO-239 female connectors * 3.35 x 3.425 x 3.75in (85 x 87 x 95mm) * 9.8oz (280g)
Not Yet Reviewed
$165.99
Diamond Antenna SX600 Dual Power Meters
Diamond Antenna SX600 Dual Power Meters provide a switchable selection of metering from one of two directional couplers in one box! Select the 1.8 to 160 MHz coupler for your Low-Band/VHF rig or select the 140 to 525 MHz coupler for your VHF/UHF rig. Since there are two separate couplers, you can leave the SX600 in-line with both rigs at the same time! The SX600 measures forward/reflected power and SWR using a single sweep meter. With three full-power scales of 5, 20, and 200 watts, the SX600 provides handheld, QRP, and high power operating levels. With most of today's rigs providing 200 watts or less, the SX600 will satisfy the vast majority of transceivers. Their compact size makes these meters useful for testing both base and mobile installations. Low insertion loss and accurate readings mean that your station will operate to peak efficiency. Speaking of peaks, these meters will read peak watts, as well as RMS! That's so handy when operating SSB on HF or VHF/UHF bands! Note: For additional product information, please look at the files under the "Documentation" tab. When you need the features and flexibility of a dual-input power/SWR meter, one of these Diamond Antenna SX600 Dual Power Meters from DX Engineering is the obvious choice!
( 5 )
$199.99
Milwaukee M12 12:1 Infrared Temp-Guns
Milwaukee M12 12:1 infrared temp-guns deliver the clearest screen with faster scanning. With stunning readability indoors and out, these temperature guns provide easier readings for professional, residential, commercial, and industrial users--in any environment. With a 7-point reinforced frame, fully bumpered nose, and shielded LCD, Milwaukee M 12:1 infrared temp-guns have superior durability to survive a 6 ft. drop. Key features and possible contents: * Infrared temp-gun * NIST certification (NST models only) * Manual * 12 V lithium ion battery * Premium LCD display for clear readings * User-configurable high/low temperature alert * Hold, Max, Min, Avg, Diff modes * Clear button functions, easy setup * Over molded grip for easy handling * 0.95 fixed emissivity
Not Yet Reviewed
$219.99
Coaxial Dynamics Plug-In Elements
Coaxial Dynamics Plug-In Elements are calibrated to exacting specifications to assure interchangeability with one another, with any Coaxial Dynamics and Bird Electronic RF power instrument in the 7/8 in. line size - whether purchased today or 20 years ago. Their calibration is for any 30 microampere full scale meter movement, including Bird Model 43 and Coaxial Dynamics meters, so these elements may be used interchangeably with very good results. Readily available in several full-scale power ratings from 5.0 Watts to 10,000 Watts and eight frequency ranges starting with 2 to 30 MHz through 1.1 to 1.8 GHz. There are Coaxial Dynamics Plug-In Elements to satisfy most Amateur Radio and commercial RF testing requirements. Element accuracy is maintained by calibrations using RF Power Standards (NIST traceable), supported by more than 30 years of history and experience! Your confidence in the quality and dependability of Coaxial Dynamics Plug-In Elements is secured with the exacting manufacturing techniques and high tolerances that produce consistent quality and repeatable accuracy from element to element. Each element carries a Coaxial Dynamics Two Year Limited Warranty. Whether you are monitoring station power, checking antennas, doing bench repairs or just need accurate equipment output readings, Coaxial Dynamics Plug-In Elements,interchangeable with Bird Electronic Corporation elements, provide frequency coverage and power ratings for your Directional Wattmeter. Order your own high-quality Coaxial Dynamics Directional Wattmeters and Plug-In Elements from DX Engineering!
( 15 )
$151.20
—
$236.00
Diamond Antenna SX200 Power Meters
Diamond Antenna SX200 Power Meters measure forward/reflected power and SWR using a single sweep meter. Their compact size makes these meters useful for testing both base and mobile installations. Featuring switchable RMS or peak power, the illuminated meter also displays antenna SWR as needed. The small size of these meters will allow for installation in many vehicles, and the 1.8 to 200 MHz coverage suits numerous base and mobile transceivers. Only 4 watts of power are required for testing, so many 2-meter hand-helds and 2-meter base antennas may be tested, too! Note: For additional product information, please look at the files under the "Documentation" tab. Incorporating three power ranges with full-scale readings of 5, 20, and 200 watts, these Diamond Antenna SX200 Power Meters are a superlative addition to any amateur station!
( 11 )
$104.99
Elecraft CP1 Dual Directional Coupler Kits
Elecraft CP1 Dual Directional Coupler Kits can be used to sample a transmitter's forward power and reflected power output. They provide high directivity, can be internally or externally terminated, and can be constructed with a coupling loss of either 20 dB or 30 dB. As a companion to the 2-Tone Test Oscillator, this high-directivity coupler can be used to connect the transmitted signal to an oscilloscope or station monitor for display of the transmit envelope. Shipped as an unassembled full kit. Features include: * Frequency Range: 1-30 MHz * Coupling Loss: 20 dB or 30 dB (29.8) +/- 0.25 dB * Directivity: 30 dB * Power Rating: 30 dB coupler, 250 W and 20 dB coupler, 25 W
( 1 )
$109.95
Diamond Antenna SX400 Power Meters
Everything the SX200 does for you on HF, the Diamond Antenna SX400 Power Meters will do on VHF and UHF. SX400 meters measure forward/reflected power and SWR using a single sweep meter. Their compact size makes these meters useful for testing both base and mobile installations. Featuring switchable RMS or peak power, the illuminated meter (external power required) also displays antenna SWR, as needed. The small size of these meters will allow for installation in many vehicles, and the 140-525 MHz coverage suits numerous VHF/UHF base and mobile transceivers. Note: For additional product information, please look at the files under the "Documentation" tab. Incorporating three power ranges with full-scale readings of 5, 20, and 200 watts, these Diamond Antenna SX400 Power Meters from DX Engineering are a must for the active VHF/UHF amateur operator!
( 6 )
$116.99
Elecraft W1 140W Computing Wattmeter/SWR Bridge Kit
The Elecraft W1 140W Computing Wattmeter and SWR Bridge kit is a versatile microprocessor-based RF power and SWR meter that can be used with any transmitter from QRP levels to 140 watts output from 1.8 to 30 MHz. The W1 automatically selects the proper power range of up to 1.4, 14, or 140 watts and indicates the peak forward power and SWR on built-in bar graph LEDs. High resolution power and SWR readings are also available for data display on a computer via a 3.5mm connector for an optional USB cable. Designed to be used as a stand-alone unit, the W1 can also be built into existing equipment or an enclosure of your choice. Shipped as an unassembled full kit. Features include: * Auto-ranging power ranges: 150 mW to 1.4 W, 1.5 W to 14 W, 15W to 140 W * SWR ranges 1.1 to greater than 5:1 * Computer readable via USB * Accuracy: 0.5 dB typical * Powered by 9 V battery or external 12 V DC
( 3 )
$208.95
Elecraft W2 Wattmeter Sensors
Elecraft W2 Wattmeter Sensors are available to expand the functionality of your W2. Add a second sensor for a different amplifier or antenna tuner. Or, upgrade your W2 to cover a different power range than the one you already have. These are dual directional couplers with the Ethernet-style CAT cable included for fast, direct connection to the W2 Wattmeter. Choose from 0.1 to 200 watt or 1 to 2,000 watt models. Each have SO-239 input and output connectors.
( 8 )
$174.95
Elecraft 2T-GEN 2-Tone Test Oscillator Signal Generator
Elecraft 2T-GEN 2-Tone Test Oscillator Signal Generator is a project kit that you build. This bench-top generator is designed to provide the test standard 700 and 1900 Hz audio source for measuring the transmitter Intermodulation Distortion (IMD) of SSB transceivers and linear amplifiers. The 2T-GEN allows you to quickly assess the linearity of the transmitter and amplifier. This 2-tone test signal is an excellent stress test for any amplifier. For the transmitter section of the transceiver, as well as for an amplifier, the 2-tone test can help you determine whether your SSB signal has proper fidelity or improper splatter. The 2T-GEN kit has an RCA output connector with plenty of drive transceiver and transmitter microphone inputs, and includes rubber feet for grip and isolation. Conveniently powered by an on-board 9 V battery, but packing a 200mV punch, this signal generator is a must-have for any ham shack. Sold and shipped as an unassembled full kit for an easy-build project. Features of the ECT-2T-GEN include: * Compact size: 2.5 in. wide and 3.5 in. long * Adjustable output: 0-200 mV * Produces 700 and 1900 Hz tones * Very low harmonic distortion: -55 dB For an enjoyable afternoon kit building project, the Elecraft 2T-GEN 2-Tone Test Oscillator Signal Generator is a handy piece of test gear for any Amateur operator. Order a couple, build both and give away one as a gift! Spread the word: Elecraft kits and accessories are now in stock at DX Engineering!
( 4 )
$153.95
Clearance
Open Box
Metropwr FX3 3KW Power Couplers
Metropwr FX3 3KW Power Couplers are used as sensors to relay measured data about the RF on the antenna feedline to the connected Metropwr FX773 or FX775 SWR/Wattmeter. These external couplers feature a frequency range of 1.8 – 55 MHz and may be installed up to 16 feet (5m) from the touch-screen meter controller. Metropwr Power Couplers are intended for indoor use only.
Not Yet Reviewed
$589.99
$147.50
Coaxial Dynamics Wattmeter Accessories
Coaxial Dynamics Wattmeter Accessories represent a wide range of RF and convenience accessories for all of their wattmeter products. Accessories include protective cases, line sections, conversion kits and more. Coaxial Dynamics has a strong commitment to quality that extends into their full line of RF wattmeter accessories. Due to the rugged conditions frequently encountered in commercial service calls, durability and dependability are key factors in the engineering of all Coaxial Dynamics goods. They are aware that Coaxial Dynamics RF products are exposed to some of the most inhospitable and demanding environments. Coaxial Dynamics designs and manufactures accessories that protect, tailor and enhance their wattmeter products for your convenience. When you own Coaxial Dynamics test equipment you already know their quality. Don't come up short on the quality of accessories! Order your Coaxial Dynamics Wattmeter Accessories from DX Engineering today and enjoy the convenience and durability you need.
( 2 )
$115.00
—
$165.00
Lang Tools Digital Multimeters
All Lang Tools digital multimeters perform general voltage and resistance measurements with audible continuity testing for checking switches and fuses. Typical capabilities and features of these versatile, multipurpose digital multimeters include: * Multiple functions * Several ranges * Diode test * Battery test * Temperature * Test leads included Select Lang Tools digital multimeters are available with: * Data hold * Auto power off * Automatic ranging * Inductive pickup * Thermocouple probe * Protective rubber boot * CAT III and/or CAT IV safety ratings
( 1 )
$118.99