Portable Masts, Mounts and Accessories - Free Shipping on Most Orders Over $99 at DX Engineering

DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits

DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits bring together high quality and innovation for the Amateur Radio antenna experimenter and portable operator. Here are the latest telescopic tubing and clamp kits, offered in four sizes to satisfy the needs of almost any ham for temporary and portable antenna support, with speed and convenience in mind. Now, with shorter fiberglass tubing, transporting is much easier and shipping costs are reasonable once again! These Complete Kits include the all new DX Engineering Telescoping Fiberglass Tubing. They are made from high quality, pultruded fiberglass tubing with a nominal 0.120 in. wall thickness and a smooth finish for long term use. The two shorter sets have 48 in. sections; the four piece set can extend to 15 ft., and the seven piece set can telescope to 25 ft. The two sets that can extend to 46 ft. tall consist of seven 90 in. sections. The standard set starts with a 2 in. OD base and the Heavy Duty 46 ft. model features a massive 3 in. OD bottom section. DX Engineering Cam Lock Clamp Kits provide fast and easy operation of these portable telescopic fiberglass masts. Multiple clamps are included with each kit, and are the type that permanently mount on the lower tube and allow fast telescopic mast extension and collapsing using the integral Cam Lock Lever that secures the smaller inside tube. Each Cam Lock Clamp kit includes a 3mm Allen wrench that fits all three cap screws, two for the lower tube mounting clamp and one on the upper lever adjustment. Once properly adjusted, the closed lever of the Cam Lock Clamp will hold the upper tube in place very securely. A vinyl cap is included to cover the top of the smallest fiberglass tube being clamped. See all of the included clamps and tubing sizes in the chart, at each kit's images and at the "More Detail" link. Rope for the required guying of telescopic fiberglass masts is sold separately. DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits are the all-new 4 ft. and 7.5 ft. sets of sturdy tubing and easy-to-use clamps for your antenna project, and they ship at low cost! Order yours today!

4.82 out of 5 stars ( 152 )

$122.98

—

$237.98

Chameleon Antenna CHA CFM Carbon Fiber Portable Telescopic Masts

Chameleon Antenna CHA CFM Carbon Fiber Portable Telescopic Masts are an ideal solution when there are no trees to hang your wire antenna—or when regulations prevent it—the CHA CFM-16 and CHA CFM-34 Carbon Fiber Masts from Chameleon Antenna deliver the perfect adventure-ready portable solution. Designed for rugged performance and maximum convenience, these self-supporting telescopic masts require no guying, making deployment fast and effortless. Engineered for radio operators who demand mobility and reliability, the CHA CFM series combines incredible strength with minimal weight. These masts can handle the toughest field conditions while maintaining the stealth and portability needed for discreet or tactical operations. Whether used as a manpack EMCOMM mast or a portable wire antenna support, the CHA CFM-16 and CFM-34 are ready for any mission.

4.2 out of 5 stars ( 5 )

$125.00

—

$175.00

DX Engineering Nomad Portable Telescopic Masts

DX Engineering Nomad Portable Telescopic Masts are unique, high-quality lightweight fiberglass portable masts designed for rugged conditions. Specifically intended for POTA (Parks On The Air), SOTA (Summits On The Air) and JOTA (Jamboree On The Air), Nomad masts are readily available for fast and simple deployment in any backpack or portable operation. Nomad Portable Telescopic Masts are available in four versions - Red or Black and 19 ft. or 23 ft. extended heights and they collapse small enough, and are light enough, to take on a backpack "hike-pedition" like SOTA, or to elevate a lightweight antenna for any portable or temporary operation, such as POTA (Parks On The Air). Features of DX Engineering Nomad Portable Telescopic Masts: * High-gloss fiberglass sections with a great combination of high strength and light weight * Non-conducting low-loss fiberglass construction *Friction Lock: Pull each section up with twisting motion to lock. When extending, start with the smallest section. When collapsing, start with the largest section. * Super short collapsed length for easy transport * Two distinct colors for different visual purposes; Stealth Black and High Visibility Red * Removable base cap to allow field repairs and sections to be removed, if desired * Hollow top-section allows wires to be fed through for a full length wire antenna * Perfect for use with DX Engineering Low Power Portable Dipole and Winder Kit Antennas Specifications: Nomad23 -Large mast * Extended length: 23 ft. (7 meters) * Packed length: 23 in. (58.4 cm) * Base with cap is 2-3/8 in. * Bottom Tube 1-15/16 in. * Top Tube - 1/8 in. * Weight with bag 3.11 lbs. Nomad19 - Small Mast *Extended 19 ft. (5.8 meters) * Packed length: 22 in. (55.9 cm) * Base with cap is 1-3/4 in. * Bottom Tube 1-7/16 in. * Top Tube - 1/8 in. * Weight with bag 1.72 lbs. * Mast Material: Medium-duty fiberglass (non-conducting) NOTE: All dimensions approximate.

4.91 out of 5 stars ( 11 )

$106.99

—

$142.99

Chelegance Portable Telescoping Antenna Tripods

Chelegance Portable Telescoping Antenna Tripods are versatile and portable antenna tripods designed to support antennas like the MC-599 and JPC-7, making them ideal for various portable operations such as EMCOMM, POTA, and SOTA. Constructed from lightweight yet durable aluminum alloy, these tripods offer both stability and ease of transport. Additionally, they feature 5 adjustable sections, enabling flexible height adjustment from 4.6 to 15.75 feet and include a 5/8-inch diameter mounting stud with 1/4-20 inch threads on top. The tripod legs fold out to a diameter of approximately 4 feet, providing a solid foundation for antenna deployment. With a weight capacity of 19.62 pounds and a total tripod weight of just 9.0 pounds, the Chelegance CH0030029-O2 combines strength and portability, making it a reliable choice for amateur radio enthusiasts and professionals alike.

5.0 out of 5 stars ( 7 )

$125.99

Moonraker Tripod-125 Heavy Duty Tripods

Moonraker Tripod-125Heavy Duty Tripods will hold any mast from 1.89 inches to 3.94 inches in diameter. Sturdy 1.62 inch black steel pipe makes up the frame and features independently adjustable legs height from 0 to 18 inches. The legs feature thumbscrews, a locking pin to prevent the legs slipping and non-skid rubber feet. Weighing 8 pounds and collapsing to 7 x 7 inches square with a length of approximately 5 feet, This tripod is perfect for your next POTA activation or Field day.

Not Yet Reviewed

$239.99

Carlson Heavy Duty Portable Antenna Mast Trailer Hitch Mounts

Carlson Heavy Duty Portable Antenna Mast Trailer Hitch Mounts are the perfect solution for securely mounting your antenna mast to a standard 2.0-Inch trailer hitch receiver. Constructed from heavy-duty steel and finished in gloss black for durability, these Carlson antenna mast mounts are designed to handle demanding conditions.

4.33 out of 5 stars ( 3 )

$185.99

SOTAbeams Tactical Mini Compact Ultra-Portable Telescopic Mast

SOTAbeams Tactical Mini Compact Ultra-Portable Telescopic Mast is small enough to fit in a backpack. It is tall enough to support an antenna, strong enough to withstand the elements and light enough that you can carry it with you anywhere you go! Portable operators need something lightweight and transportable to support their antennas. The Tactical Mini was designed with those features in mind. Even in the most demanding situations the Tactical Mini will not let you down. A great support for the Band Hopper 2 and Band Hopper 3 it is also the perfect support for a ground-plane antenna for 20M, dipoles and end-fed half wave antennas. SOTAbeams Tactical Mini Features: * Heavy gauge pole sections—the perfect balance of strength, stiffness, and weight for more demanding applications * Super short-packed length for easy transport in a backpack * Fits in aircraft carry-on baggage (always check before flying) * The very best extended length for tactical use in extreme conditions * Telescopic - perfect for rapid deployment * Military colors for low visual signature * Camouflage carry bag with draw string * Built-in base shock absorber * Non-conducting low-loss fiberglass construction * Hollow top-section allows wires to be fed through * Screw-cap base allows field repairs and section swap-outs * Perfect for use with the Band Hopper antenna range Detailed Specifications: -- Extended length: 19.6 ft. (6 meters) - Lengths approximate -- Packed length: 22.1 in. (56 cm) -- Number of sections: 11 -- Wall thickness: 0.04 in. (1 mm) bottom and top -- Weight: 1.5 lbs. (0.7 kg) -- Mast Material: heavy-duty glass-fiber composite (non-conducting for best RF performance) -- Tube diameter: Top 0.16 in. (4 mm); Base 1.53 in. (39 mm) -- Base cap diameter: 1.85 in. (47 mm) -- Tube color: Pantone 19-0622 TPX Military Olive -- Mast sections hollow to the top -- Supplied with camouflage carry bag with drawstring -- High impact foam shock absorber built into base. FAQ: -- The mast is made of Glass Reinforced Plastic (GRP) = Fiberglass. This is an insulator with excellent RF properties (very low loss). -- The packed length can be reduced to 21.3 in. (54.2 cm) by removing the top and bottom caps—useful in some airline carry-on bags. The maximum dimension for an airline carry-on bag is typically 22 x 14 x 9 in. (56 x 35 x 22 cm). -- Friction lock: pull each section firmly with a twisting motion for best lock. When erecting always start with the smallest section. When taking down always start with the largest section. -- Mast sections may be removed by unscrewing the endcap at the bottom of the mast, pulling out the shock absorber and removing unwanted sections. Always replace the shock absorber before use.

4.71 out of 5 stars ( 14 )

$190.99

Comet YS-45 Portable Aluminum Tripods

Comet YS-45 Portable Aluminum Tripods are the perfect companion to Comet's CP-45 Telescopic Aluminum Masts, sold separately. These portable tripods have a minimum length of 34 in. and their maximum extended mast length is 55 in. The tripod leg radius is only 24 in. Their maximum antenna load is 22 lbs., including the CP-45 mast. These tripods weigh only 3 lbs., 4 oz. and feature a friction lock with a nylon bushing. When you need light, portable, or stealthy antenna supports, remember that these Comet YS-45 Portable Aluminum Tripods from DX Engineering will provide the special features you need!

5.0 out of 5 stars ( 1 )

$176.95

Carlson STD Drive on Mast Mount Car Stands

Carlson STD Drive on Mast Mount Car Stands are designed to park a vehicle on the mount and then support a vertical mast with a maximum OD of 2.06in. Once you have the vehicle parked on the stand with a brake on, you can add in the telescopic mast and extend it up. The size of the antenna and velocity of the wind may limit antenna height. These Carlson STD Drive on Mast Mount Car Stands include a standard duty base plate, mast mount pipe stand, and hardware kit.

5.0 out of 5 stars ( 3 )

$119.00

REZ Antenna Systems [Z]Pod Carbon Expedition

The REZ Antenna Systems [Z]Pod Carbon Expedition is a premium full-height carbon fiber field tripod engineered for operators who demand maximum stability, versatility, and deployment flexibility. Designed specifically for portable HF antenna systems, the Expedition provides a rugged, lightweight platform capable of supporting everything from quick park activations to extended field operations. A custom-designed REZ mounting system allows compatible REZ antenna systems to attach directly to the tripod without additional hardware, creating a clean, secure deployment. Integrated radial ports provide convenient connection points for expanding your radial field when using antenna systems without integrated radial connections. The mounting system also allows your radial field to remain in place while quickly swapping compatible REZ antenna systems, minimizing setup time and maximizing flexibility in the field. Whether operating from parks, summits, campsites, emergency communications sites, or DX expeditions, the [Z]Pod Carbon Expedition delivers a professional deployment platform that integrates seamlessly across the REZ antenna ecosystem. Features • Premium full-height carbon fiber construction • Lightweight design with exceptional stability • Custom-designed REZ mounting system • Integrated radial expansion ports • Standard 3/8-16 tripod interface • Designed specifically for portable HF antenna deployments

Not Yet Reviewed

$219.00

Comet CP-45 Telescopic Aluminum Masts

Comet CP-45 Telescopic Aluminum Masts are collapsible four-section masts. They may be extended to 14 ft., 8 in. and will collapse to a mere 54 in. These masts weigh only 3 lbs. Designed for light duty and stealthy applications, their maximum antenna load is 22 lbs. These masts are a maximum diameter of 1-5/16 in. and a minimum of 7/8 in., and friction-lock with their built-in nylon compression bushings. They incorporate a handy guy-bracket and 45 ft. of guy line. These CP-45 masts are designed to be supported by the companion Comet YS-45 Aluminum Tripods, sold separately. When you need light, portable, or stealthy antenna supports, remember that Comet CP-45 Telescopic Aluminum Masts will provide the special features that you need!

5.0 out of 5 stars ( 7 )

$184.49

WiMo Tripod Foot Plates

WiMo Tripod Foot Plates are sold in sets of three and are used on the legs of WiMo Mast Tripods to stabilize them on sandy soil or to level the tripod on an incline. Tripod Foot Plates are 240 x 120mm (9.45 x 4.72 in.) aluminum plates. Tubular leg attachments allow for the tripod legs to slide in and then clamped into place, allowing for a height adjustment range of up to 100mm (3.9 in.) A hole in the Tripod Foot Plates allows anchoring with a ground stake (not supplied).

5.0 out of 5 stars ( 1 )

$129.99

ROHN Telescoping Masts

ROHN Telescoping Masts are available in a variety of heights to suit your specific application. They are manufactured from steel and then galvanized for corrosion protection and come assembled with mounting hardware. All telescoping mast installations must be guyed or bracketed (sold separately) and should be performed by experienced or licensed installers. NOTE: Unless specifically listed as otherwise, these masts are over-weight and over-length for our standard UPS or FedEx free shipping. Freight charges may apply. When you need antenna supports, ROHN Telescoping Masts, from DX Engineering, are the time-tested solution!

4.45 out of 5 stars ( 93 )

$147.99

—

$207.99

Wimo Heavy Duty Fiberglass Telescoping Masts

Wimo Heavy Duty Fiberglass Telescoping Masts are quick and easy to set up, so they are ideal for portable operations such as Field Day, POTA, or a quick activation from a balcony or backyard. These reinforced telescoping masts are rigid, non-conductive and consist of a total of 10 segments. The non-removable bottom cap is flush with the bottom tube, so it does not increase the diameter of the mast. The diameter of the top tube is approximately 0.43 in. with a wall thickness of 0.04 in. and the bottom tube is approximately 1.80 in. with a wall thickness of 0.08 in. and can safely handle wire antennas, a small VHF Yagi, or other small devices.

4.1 out of 5 stars ( 10 )

$229.99

SOTAbeams MDCS-100 Drive-on Mast Mount

SOTAbeams MDCS-100 Drive-on Mast Mount makes it easy to set up for portable operations with your fiberglass, aluminum or carbon fiber mast antenna support along side your parked car. Just drive a wheel onto the base plate and insert a mast into the steel sleeve. Perfect for operating from remote locations where other portable antenna mounting options are not available. Keep the drive-on mount in your car for a portable antenna system mount that is ready for any operating opportunity. This is a handy accessory for the well-equipped emergency communicator. Paired with the SOTAbeams Compact Travel Mast (SBM-TRAVELMAST), you have a complete portable solution for mounting a light-weight wire antenna. NOTE: This mount is not suitable for the SOTAbeams Mini Telescopic Pole or the Tactical 7000hds. The recommended maximum telescopic fiberglass or carbon fiber mast height is 33 ft. (10 m). Guying recommended; guying is required in windy conditions or when using antennas that exert a significant "pull". For some slim masts you will need to shim the sleeve to get a proper fit. Made of mild steel with an attractive silver painted finish it will give many years of service. Great with guyed aluminum, carbon fiber and fiberglass poles up to 2.25 in. diameter (58mm) at the base section. It is quick and easy to assemble and take apart for transport as the stand separates into two parts. SOTAbeams Drive-on Mast Mount Specs: -- Sleeve Height: 15.75 in. (400mm) -- Sleeve Inside Diameter (ID): 2.36 in. (60mm) -- Sleeve Outside Diameter (OD): 2.51 in. (63.7mm) -- Weight: 5.28 lbs. (2.4 kg)

5.0 out of 5 stars ( 2 )

$190.99

Carlson HD Drive on Mast Mount Pipe Stand

Carlson HD Drive on Mast Mount Pipe Stands comes in three different diameters: 2.0 inches, 2.5 inches, and 3.0 inches. Select the appropriate Pipe Stand size based on the diameter of your mast. Includes 3/8 hex bolts and nuts, and a thumb screw for securing the mast in the pipe stand. These heavy duty Mast Mount Pipe Stands are designed to be used along with the Carlson Communications HD Drive on Mast Mount Pipe Stand Base (Sold Separately or as Package). These Pipe Stands are sold separately, enabling operators to upgrade to a larger mast without needing to repurchase the entire kit.

Not Yet Reviewed

$169.99

—

$215.99

I0JXX Mast Tripods

I0JXX Mast Tripods are made from high-quality anodized aluminum, delivering a durable yet lightweight solution ideal for EMCOMM, Field Day, SOTA, POTA, IOTA, and any situation requiring quick, temporary mast deployment. Designed for convenience, these tripods feature a simple folding mechanism that collapses in one smooth motion, making setup and teardown fast and hassle-free while maintaining a compact storage size. They extend to a maximum height of approximately 5.25 feet (1.6m) and folds down to about 3.1 feet (0.95m), offering both portability and practical working height. Built with corrosion-resistant stainless steel hardware, they securely accommodate masts ranging from approximately 1.6 to 2.4 inches (40–60 mm) in diameter. Weighing in at just under 8 pounds (3.6 kg), these tripods strike the perfect balance between stability and ease of transport, making them an essential accessory for reliable field operations.

Not Yet Reviewed

$216.99

REZ Antenna Systems [Z]Pod Carbon Compact Tripods

The REZ [Z]Pod Carbon Compact is an ultra-portable carbon fiber field tripod engineered specifically for portable HF antenna deployments. Designed for operators who prioritize lightweight, compact equipment without sacrificing stability, the Compact provides a solid foundation for portable field operations while packing down small enough for backpacks, travel kits, and grab-and-go deployments. A custom-designed REZ mounting system allows compatible REZ antenna systems to attach directly to the tripod without additional hardware, creating a clean, secure deployment. Integrated radial ports provide convenient connection points for expanding your radial field when using antenna systems without integrated radial connections. The mounting system also allows your radial field to remain in place while quickly swapping compatible REZ antenna systems, minimizing setup time and maximizing flexibility in the field. Whether operating from parks, summits, campsites, or emergency communications locations, the [Z]Pod Carbon Compact provides a lightweight, professional deployment platform that integrates seamlessly across the REZ antenna ecosystem. Features • Lightweight carbon fiber construction • Compact folded length for easy transport • Custom-designed REZ mounting system • Integrated radial expansion ports • Standard 3/8-16 tripod interface • Designed specifically for portable HF antenna deployments

Not Yet Reviewed

$129.00

I0JXX Aluminum Telescoping Antenna Masts

I0JXX Aluminum Telescoping Antenna Masts are constructed from strong, lightweight, and weather-resistant aluminum tubing, making them ideal for temporary, portable, and semi-permanent installations when properly guyed. These versatile masts are suitable for a wide range of applications, including deploying Amateur Radio antennas, installing weather stations, mounting security cameras, and more. Each mast features telescoping sections that extend smoothly to the desired height, with models available in extended lengths ranging from 23ft. to 49ft. (7–15m). For added stability, every section is secured firmly in place using integrated locking clamps.

5.0 out of 5 stars ( 2 )

$152.99

—

$203.99

Alpha Antenna Heavy Duty Survivor Tripods

Alpha Antenna Heavy Duty Survivor Tripods are a heavy-duty, specialized support system designed to provide exceptional stability for antenna setups, even in high wind conditions. Ideal for Alpha Antenna models such as the HexTenna, FMJ, and Alpha Loop series, this tripod features an extremely stable footprint that typically requires guying only in very strong winds. Its three independently adjustable legs allow for balanced deployment on uneven terrain, while the tripod offers a total height of 5.25-feet and collapses to a compact size of approximately 42x8x8 inches for easy transport. A heavy-duty clasp keeps the tripod securely closed during storage, and an integrated webbed shoulder strap ensures convenient carrying. Each leg includes a step and ground spike for secure anchoring, and the legs can be positioned nearly flat for maximum stability when conditions demand. Additional weight can be applied to the legs for enhanced stability. Quick clamp release levers make assembly fast and simple, ensuring reliable performance in the field.

Not Yet Reviewed

$240.00

Comet HFJ Mini Tripods

Comet HFJ Mini Tripods are the easy to carry companion for portable operations and is designed to support a variety of antennas. These tripods are quick and easy to set up; weighing in at just 1 pound and collapsing to 7.5 inches, this tripod extends to 2.6 feet and comes with a mounting post for a 3/8x24 and a UHF Female connector. All components are manufactured from aircraft-grade aluminum alloy and designed for a long life of use. Both mounting posts terminate in SO-239 connector, allowing flexible connections to a variety of radios. This tripod is capable of holding up to 6.6 pounds and is a perfect companion to the Comet HFJ-350 portable antennas. Combine it with the CMA-CGW-560 and you have a portable antenna system for any band from 160 meters through 6 meters. This Mini Tripod will sit perfectly on a picnic table or the ground and provide easy access to the antenna for quick tuning adjustments and band changes.

Not Yet Reviewed

$140.95

WiMo Aluminum Telescoping Masts

WiMo Aluminum Telescoping Masts are convenient for many tasks. Made of a strong yet lightweight weather-resistant alloy, these metric-sized masts are primarily intended for temporary and portable use. They may also be used for long-term installations with the WiMo WMO-23050 Metal Guy Ring Kit. The versatile masts have a range of uses, including vertical antenna construction, installation of weather stations, and mounting of a security camera. They're made of slotted aluminum tubing that can be extended to the desired length. Mast models are available with extended lengths of 5 to 16 meters (16.4 to 52.5 ft.). Each section can be locked solidly in place with the attached clamps. Load capacity of the masts is determined by the clamping length and height; depending on the diameter, weights up to 4 kg (8.818 lbs.) or more are possible. The maximum extension length of each section is limited by a marking ring at approximately 20cm (7.874 in.) above the bottom of the tube. The sizes of the telescoping aluminum tubing are in 5mm (0.197 in.) increments, with a nominal wall thickness of 2mm (0.079 in.).

4.75 out of 5 stars ( 4 )

$165.99

—

$219.99

WiMo Telescoping Fiberglass Masts

WiMo Telescoping Fiberglass Masts are quick and easy to set up, so they are ideal for portable operations such as Field Day, POTA, or a quick activation from a balcony or backyard. These reinforced telescoping masts are rigid, non-conductive, and easy to transport in your car or carry-on luggage. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Features and Specifications: * Extended Length – 19.69 ft. (6M) * Retracted Length – 2.13 ft. (65cm) * Bottom O.D. – 1.57 in. (40mm) * Top O.D – 0.16 in. (4mm)

4.67 out of 5 stars ( 3 )

$155.99