Availability
6 Results Found For "in-line"
Preformed Line Products Big Grip Dead Ends
Preformed Line Products Big Grip galvanized Dead Ends are available in multiple sizes to facilitate the guy line installation of your tower. Using genuine Preformed Line Products Dead Ends will give you an added sense of security, knowing that the investment you've made in your tower is stable and safe.
( 5 )
$109.99
DX Engineering Phillystran Steel Tail Kits
DX Engineering Phillystran Steel Tail Kits provide the appropriate transition from non-metallic to metallic guying cable at the ground end of tower guying systems. Steel Tail Kits are available for Phillystran HPTG-4000I, -6700I and 11200I Guy Lines. What is the function of the steel tail? Here is the recommendation by Phillystran, the manufacturer of HPTG-I High Performance Tower Guy non-metallic guy lines: A steel tail is a length of EHS (Extra High Strength) steel guy line connecting the HPTG-I assemblies to the turnbuckle or guy anchor. The steel tail protects the HPTG-I assemblies from damage due to brush fires, lawn maintenance equipment or vandals. The steel tail length should be sufficient to get the bottom end of the HPTG-I assembly above arm's reach, or above brush tops (if located in a marsh or tall brush area). The HPTG-I should never pass through tree limbs or be allowed to rub against poles or trees. The steel tail allows for easier guy length calculations and serves as a guy tension monitoring point, as well as a safer area to attach guy grips during guy line installation and tensioning. Eliminating the hassle of buying a length of steel cable and obtaining a special tool to cut it, DX Engineering Phillystran Steel Tail Kits provide everything needed to isolate your tower's non-metallic guy cable from harm. Three different size kits are available for different tower guying requirements provided by Phillystran guy cables 4000I, 6700I and 11200I. Here are the items included in these innovative Steel Tail kits: - 12 ft. EHS steel guy line, Galvanized, in three kit sizes, 3/16 in., 1/4 in. or 5/16 in. - Porcelain Guy Line Strain Insulator, 502 or 504 depending upon kit size - Galvanized Steel Preform Dead End Big-Grips for EHS steel guy line, two per line - Heavy Duty Thimble, galvanized steel, appropriately sized for each kit - Cable Ties, UV protected Black, four, to secure installed Big-Grip ends Note: Phillystran guy line and Preform Dead End Big-Grips for Phillystran are not provided in this kit and must be ordered separately. DX Engineering Phillystran Steel Tail Kits provide Porcelain Guy Line Strain Insulators for the top end of the Steel Tail so that the galvanized steel Big-Grips for the Phillystran and for the EHS Steel Guy Lines do not touching and make RF noise. For three different size Phillystran guy line, HPTG-4000I, -6700I and -11200I, these kits are available exclusively from DX Engineering in 3-packs for each level of tower guying.
( 2 )
$201.99
—
$239.99
DX Engineering Bent Pin Shackles
DX Engineering Bent Pin Shackles are used for guy line attachment to towers for Amateur Radio and commercial applications. Also known as a clevis in the power industry, these shackles are specially designed with a removable bent bolt and locking nut to go through the outer hole of the matching guy strain insulators commonly known as the "502" or the "504" in ham radio tower work. Forged from 1/2 in. steel and hot dip galvanized, these Bent Pin Shackles have a minimum ultimate strength of over 12,000 lbs. and have a rounded end large enough to be used around a tower leg. However, they are typically connected to a guy attachment tower ear or guy bracket, with a screw pin shackle used as a link. The insulators that fit inside of this shackle accept the guy line big grips from either metal or non-metallic guy lines. For those who already have insulators, Bent Pin Shackles are offered in a set of three for each level of guying. We sell the matching DXE-502 and DXE-504 insulators in sets of three. Also available are two kits that include three Insulators of either size and three Bent Pin Shackles. Look to DX Engineering for the unique tower hardware that you need.
Not Yet Reviewed
$231.99
ROHN Turnbuckles
ROHN Turnbuckles are constructed with a steel sleeve surrounding internal steel screws used to pull anchor points closer together by turning the turnbuckle body. They are ideally suited for tensioning mast or tower guy lines. These turnbuckles are galvanized for weather resistance and long life. Working load for these turnbuckles starts at 1,200 lbs. and then goes up. Break strength, also known as ultimate strength, is 6,000 lbs. and up. If you are raising a new mast or tower, or just performing maintenance on your existing installation, these ROHN Turnbuckles from DX Engineering will take the strain, year after year after year!
Not Yet Reviewed
$116.99
Carlson Mid-Level Guy Line Assemblies
Carlson Mid-Level Guy Line Assemblies are engineered specifically for use with the Carlson Tower Lift on Rohn 25G series towers. This kit includes three mid-level guy line assemblies, each consisting of a 60-foot guy line pre-attached to a durable rung bracket. Together, these assemblies allow you to effectively organize and control guy lines so they do not interfere with the lift's movement as it travels up and down the tower. Designed for both new installations and retrofits, these patent-pending assemblies integrate seamlessly with the lift system. When upgrading an existing standing tower with mid-level guy lines, simply replace the original lines with these specially designed assemblies to maintain proper function of the tower lift. The complete Mid-Level Guy Line Assemblies kit ships in a compact 12x12x6in. box and weighs 16lbs.
Not Yet Reviewed
$199.00
American Tower Guy Bracket Assemblies
Keep your tower straight with one of these American Tower Guy Bracket Assemblies. Guy bracket assemblies are used to properly attach guy lines and to distribute the forces correctly. They prevent the placement of excessive guying forces onto individual tower legs. Multiple guy brackets are needed at different levels on taller towers. These bracket assemblies are sized to fit correctly around all three of the tower legs for the proper attachment of guy wires in each Amerite tower series. American Tower Guy Bracket Assemblies are built from quality steel and are hot-dip galvanized for long life and install in minutes. Call DX Engineering to order your American Tower Guy Bracket Assemblies today!
( 2 )
$205.99