Availability
22 Results Found For "hex"
DX Engineering XB-5 Hexx Beam Spreader and Center Post Kit
The DX Engineering XB-5 Hexx Beam Spreader and Center Post Kit is a component of the XB-5 Hexx Beam that contains parts for the antenna assembly. The Spreaders and Center Post are manufactured from high quality fiberglass material and all the parts are used as-is and no cutting or drilling is required. This helps to reduce the risk of stray fibers becoming a problem during assembly. This DXE-XB-5-SCP kit includes: - Pre-assembled Spreader Support "Ice" Ropes terminated with thimbles - Stainless Steel Carabiners for easy assembly - Pre-cut Fiberglass Spreader Sections of the appropriate lengths and diameters - Pre-cut Fiberglass Center Post - Element Clamps to serve as stops for the spreader sections and Guy Ring - Vinyl Cap - Guy Rings - only the 1-1/4 in. ID is used on the Hexx Beam Center Post (four other sizes may be retained for use as desired) - Spreader End Padded P-clamps Refer to the DX Engineering XB-5 Hexx Beam HF Antenna manual for more information.
Not Yet Reviewed
$209.99
DX Engineering XB-5 Hexx Beam Hexx Hub
The patented* DX Engineering XB-5 Hexx Beam Hexx Hub provides a strong, solid base for the entire XB-5 Hexx Beam antenna. Made from cast aluminum and machined to perfection, the Hexx Hub is far superior to available base plate designs. The Hexx Hub has integral V-Saddles and with the included Stainless Steel V-Bolt hardware firmly attaches Hexx Beam fiberglass spreaders in proper alignment without drilling or crushing. The upper and lower mast mounts are integrally cast into the hub, eliminating the need to find separate mounting flanges, reducing assembly time, improving mast alignment and providing a far stronger heavy duty attachment for the mast. Kits include: * Cast aluminum Hexx Hub * Twelve 1 1/2 in. short stainless steel V-bolts * Twelve 1/4-20 in. stainless steel hardware kit for V-bolts * Six 1/4-20 in. stainless steel hex head bolts * Six 1/4-20 in. stainless steel hex nuts * Six 1/4-20 in. stainless steel flat washers * Six 1/4-20 in. stainless steel split washers Use DX Engineering XB-5 Hexx Beam Hexx Hubs as replacement parts, for upgrading other kits or for home brew projects. *US Patent # D 605,184
( 1 )
$102.99
DX Engineering XB-5 Hexx Beam 5-Band Rigid Feeder System
The patented* DX Engineering XB-5 Hexx Beam 5-Band Rigid Feeder System, DXE-XB-5-FF, is specifically designed for the DX Engineering XB-5 Hexx Beam. A professionally engineered Stainless Steel and PTFE flat balanced feedline system, the Rigid Feeder eliminates vulnerable coaxial cable sections - providing a weatherproof, low-loss, high power balanced connection to all five bands - 20, 17, 15 12 and 10 meters. Used with the DX Engineering Maxi-Core 1:1 Balun, this balanced feeder solves the pattern-skewing problems created by the unbalanced coaxial post feeders used by others, for the optimal antenna pattern and maximum XB-5 Hexx Beam performance. This revolutionary Rigid Feeder attaches directly to the outside of the full-size 1-1/4" fiberglass Center Post of the DX Engineering XB-5 Hexx Beam. There is no drilling for attachments that would weaken the Center Post. The integral wire element center insulators with the unique serpentine wire grip and strain relief assure long, reliable performance. Rated to handle more power than the legal limit, the DXE-XB-5-FF Rigid Feeder is pre-assembled and tested and is also ideal for retrofitting to other hex beams. Intended for use the DX Engineering XB-5 Hexx Beam Wire Element Kit, DXE-XB-5-EK. *US Patent No. 8, 669,911, US Patent No. D 624,060; British Patent Number GB248003B
Not Yet Reviewed
$192.99
DX Engineering XB-5 Hexx Beam Mast Mount Kit
The all-new DX Engineering XB-5 Hexx Beam Mast Mount Kit, DXE-XB-5-MMK, is a component of the DXE-XB-5 Hexx Beam, used in the initial assembly and final mounting of the antenna onto a user supplied mast of 1.25 to 2.00 in. OD. The DXE-XB-5-MMK Mast Mount includes: - One Center Post Aluminum Mounting Tube, 1.50 in. OD for the XB-5 Hexx Beam - One Element Clamp for use on the Center Post during assembly. - One Mast Mount Plate, Heavy-Duty, 1/4 inch formed aluminum 16 x 5.125 in. with inline clamp holes - Two DXE-SAD-150A U-Bolt Saddle Clamps for the Hexx Beam Mounting Tube - Two DXE-CAVS-2P V-Bolt Saddle Clamps for the user supplied 1.25 to 2.00 in. OD mast. Additional lower holes accommodate two optional DXE-SAD-300B U-Bolt Saddle Clamps for only a 3.00 in. OD mast, or two DXE-CAVS-3P for a 2.00 to 3.00 in. OD mast, or two DXE-SSVC-3P Clamps for a 2.375 to 3.000 in OD steel mast ++++++++++++++++++++++++++++++++++++++++++++++++++++++ This DXE-XB-5-MMK Mast Mount Kit may also be used with the supplied Saddle Clamps to create a short extension at the top of a 1.25 to 2 in. OD mast with an optional 1.50 in. OD only tubing to mount a small VHF or UHF beam or vertical. This kit cannot be added to the top of any Hexx Beam. +++++++++++++++++++++++++++++++++++++++++++++++++++++ This aluminum plate is available separately as DXE-MTMP, to mount a 1.25 in. OD short upper mast. The two upper holes on this plate accommodate Stainless Steel V-Bolt Saddle Clamps model DXE-SSVC-150P for an upper mast mounting a range of 1.00 to 1.50 in. OD steel. The lower inner holes will accommodate two DXE-SSVC-2P Stainless Steel V-Bolt Saddle Clamps for a 1.00 to 2.00 in. OD steel mast, or the lower outer holes accept two DXE-SSVC-3P Stainless Steel V-Bolt Saddle Clamps for a 2.375 to 3.000 in OD steel mast. All applicable Saddle Clamps are sold individually, only at DX Engineering. Off-brand clamps will not fit this plate.
Not Yet Reviewed
$119.99
Wera Tools 400 Series T-Handle Hex Keys
Wera 400 Series T-handle hex keys are available in SAE or metric sizes. The handle shape on the tool allows transmission of particularly high tightening and loosening situations. The ergonomic shape of the handle fits the ball of the hand well, and the fingers lie securely in softly rounded recessed grips for better leverage. By the tools special design, the whole hand comes into contact with the handle and friction losses between the hand and handle are avoided. A holding function on tool holds hexagonal socket screw securely on the tool. The special surface treatment on tool offers high corrosion protection and an optimum fit in the screw head. Additional tool features and benefits: * T-Handle screwdriver for the transmission of particularly high tightening and loosening torque * Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working * Color coding according to profile and size * Additional short arm for the transmission of extremely high torque due to high leverage of the long arm * Holding function (HF) on the long arm securely holds the screw on the tool
Not Yet Reviewed
$106.99
—
$143.99
Sunex Tools Hex Drive Impact Sockets
Sunex Tools hex drive impact sockets are offered as sets or individually in several SAE and metric sizes. Stubby design hex bits are also available to fit into tight areas. Each socket is machined from CR-MO alloy steel and finished with black oxide for long life. Order the style, size, and quantity needed for your toolbox; multi-piece sets include a heavy-duty storage case.
Not Yet Reviewed
$118.99
—
$183.99
Sunex Tools Master Hex Bit Impact Socket Sets
Sunex Tools master hex bit impact socket sets include 84-pieces for your 3/8 in. driver—including hex long impact, impact hex driver, hex impact socket, triple square stubby impact socket, tamper-resistant hex, internal and external Torx sockets. Bits are machined from steel and finished with black oxide for long service life and are available in a variety of sizes. All sockets are clearly size stamped for easy tool identification and selection. Everything comes safely housed and well-organized in a durable plastic storage case.
Not Yet Reviewed
$225.99
Milwaukee M4 1/4 in. Hex Screw Drivers
Milwaukee M4 1/4 in. hex screwdrivers provide 44 lbs.-in. of peak torque and feature a 21-position clutch with auto-shutoff. They offer improved torque control during repetitive applications and are equipped with two speeds, 200 and 600 rpm, for controlled precision work. At only 244mm in length and weighing less than a pound, M4 screwdrivers are easy to operate with one hand—and feature a 1/4 in. quick-change chuck for one-handed bit changes. Drilling more than 200 holes per charge, these power screwdrivers are the first tools to feature Milwaukee's REDLITHIUM 2.0 battery on the new M4 platform, offering up to 50 percent more runtime. You can order the tool only; or a kit with one or two batteries and charger.
Not Yet Reviewed
$199.99
DX Engineering Tower Accessory Shelves
DX Engineering Tower Accessory Shelves are custom made by DX Engineering in two sizes and styles to fit different size ROHN and Amerite Towers. Made from 3/16 in. thick, laser-cut "304" Stainless Steel, each DXE Accessory Shelf comes with all stainless steel tower mounting hardware for long-lasting, durable strength. Both accessory shelves have four slotted holes (no drilling required*) to mount the most popular rotators from Yaesu, DX Engineering, M2 Antennas and Hy-Gain, and two additional holes are provided for rotator models with six mounting bolts. Rotator or positioner mounting bolts are not included with these plates; they are provided by the manufacturer with each rotator unit. Two models of DX Engineering Tower Accessory Shelves are available. Click the part details below to see more images of each model: - DXE-AS25G fits ROHN 25G and Amerite 25 towers, with formed integral brackets for v-bolt clamps. This plate is used ONLY for mounting a rotator at the top of a 25 top section or where there are no cross braces on a 25 straight section that would interfere with installation and operation of the rotator. NOTE: ROHN 25G does not accommodate mid-section bearings, so there are no holes for bearings. NO BEARINGS can be mounted on the DXE-AS25G. If you want to use a bearing, use a flat top tower section that accommodates a bearing, or install ROHN 45G or 55G Tower and DXE-AS455G Accessory Shelves. - DXE-AS455G is adjustable to fit ROHN 45G and 55G towers and Amerite -45 and -55 towers. This model accessory shelf mounts all of the rotators listed and features additional holes for mounting DX Engineering Thrust Bearings (DXE-TB300 and DXE TB400). These shelves are mounted with 3/16 in. stainless steel L-brackets and double stainless steel V-bolts at each tower leg. DXE-AS455G may be used anywhere in any 45 or 55 section for a rotator or as a bearing shelf, including as a Top Bearing Plate. As with all stainless steel hardware, a good quality anti-seize lubricant, such as Jet-Lube SS-30 (part number JTL-12555) should be used to avoid galling. When installing, mount the shelf level in the tower. Tighten all bolts evenly. *NOTE: Larger holes are only needed when mounting the OR2800 series M2 Antennas rotator. No holes are provided for Hy-Gain HDR-300 series rotators.) DXE-AS-25G Stainless Steel Parts List: 1 - Tower Shelf, laser drilled with integral L-Brackets 3 - V-Bolts, 1.50 in. x 1/4-20 3 - Hardware packages for V-Bolts (Flat Washer, Split Washer and Hex Nut) DXE-AS455G Stainless Steel Parts List: 1 - Tower Plate, 3/16 in., laser drilled 3 - Tower Plate Mounting L-Bracket, laser drilled 6 - V-Bolts, 1.00 - 2.00 in. x 5/16 in. 6 - Hex Head Bolts, 1.00 in. x 5/16 -18 9 - Hardware packs, 5/16 -18 (Flat Washer, Split Washer, Hex Nut)
( 49 )
$109.99
—
$165.99
DX Engineering RSR-7300 Radio Side Rails
DX Engineering RSR-7300 Radio Side Rail kits are specially designed to provide protection and attachment possibilities for the popular Icom IC-7300 series transceivers. These side rails will also fit the IC-8600 and IC-9700 transceivers. Radio Side Rails guard the front and rear panels whenever the radio is used for portable operations. They are made from high-strength, lightweight, impact-resistant black polymer. These robust rails function as front handles, flaring outward to maintain easy access to the controls. Their curved shape at the back panel makes it easier to slip the transceiver into a backpack, and they are ideal for POTA activations as well as casual portable activities. Radio Side Rails are designed with precise cutouts for ventilation and connections, along with specialized contours that enable quick and easy mounting of an automatic antenna tuner or other accessories using hook and loop straps. Each kit includes eight M4 thumb screws, eight M4 hex socket head cap screws, and a hex wrench, allowing for both temporary and long-term Radio Side Rail attachments. Additionally, eight rubber bumpers are provided for extra protection. These bumpers are user-installed into the four recessed holes on the inside surfaces of each side rail before attaching to the radio.
( 1 )
$129.99
Larsen BSA-KIT Base Station Antenna Kit
Larsen BSA-KIT Base Station Antenna Kit is a special mount and bracket that converts a VHF or UHF mobile antenna into a base station antenna. The antenna connector is a UHF mount and the kit includes an NMO mount adapter, so either type of mobile antenna mount style may be converted to base operations. The underside of the mount is an integral SO-239 connector for the user supplied coaxial cable. The BSA-KIT includes four 21 in. x 0.070 in. rods that secure into the four corners of the mount with hex set screws using the supplied hex key. The rods provide the proper ground plane function for any of the mobile antennas that work in the 144 to 512 MHz range. The sturdy mounting bracket has two 0.25 in. holes for wall or vertical surface mounting and four notches to provide secure mounting with the provided band clamps on a pole or mast up to 2 in. O.D. Create a stealth antenna out of a single mobile whip. This mounting bracket is perfect for base, portable, and stealth operations and is especially handy for indoor and experimental antennas. The Larsen BSA-KIT Base Station Antenna Kit is the professional method of converting commercial or amateur VHF or UHF mobile antennas into a permanent or temporary, stationary antenna solution.
( 4 )
$146.99
Carlson HD Drive on Mast Mount Pipe Stand
Carlson HD Drive on Mast Mount Pipe Stands comes in three different diameters: 2.0 inches, 2.5 inches, and 3.0 inches. Select the appropriate Pipe Stand size based on the diameter of your mast. Includes 3/8 hex bolts and nuts, and a thumb screw for securing the mast in the pipe stand. These heavy duty Mast Mount Pipe Stands are designed to be used along with the Carlson Communications HD Drive on Mast Mount Pipe Stand Base (Sold Separately or as Package). These Pipe Stands are sold separately, enabling operators to upgrade to a larger mast without needing to repurchase the entire kit.
Not Yet Reviewed
$169.99
—
$215.99
Chelegance M-104 HF 4-Band Mobile Antennas
Chelegance M-104 HF 4-Band Mobile Antennas are an excellent choice for mobile HF operations, including popular activities like POTA and SOTA. This compact and lightweight antenna kit is designed for easy setup and delivers great performance across the 40-10 meter bands. With the included 3/8-24in. threaded hex nut, the M-104 can also be used on the 2m/70cm bands. Assembly is easy, simply install one of the included coils for your desired band, then adjust the telescopic whip for optimal SWR. The M-104 provides exceptional reliability thanks to its robust construction and high-quality materials, ensuring durability in various outdoor weather conditions. Additionally, its portable design makes it easy to carry and deploy.
Not Yet Reviewed
$133.99
Wera Tools Kraftform Kompakt 60 RA Ratchet Screwdriver with Bits
The Wera Kraftform Kompakt 60 RA ratchet screwdriver with bits are the optimal combination. The reverse direction switch has an ergonomic design and the easy-to-use, yet robust, ratchet mechanism with a return angle that allows fast and precise work—even in confined spaces. The hexagon design of the directional switch made out of die-cast zinc ensures that the ratchet screwdrivers do not unintentionally roll away in the workplace and that they are ergonomic yet simple to operate even with dirty hands. For high-quality, innovative tools that are built to be rugged, reliable, and reasonably priced, Wera Tools has got you covered. Key features: * Suitable for manual and power tool operations * Smooth hard zones for high-speed turning, soft grip zones for high torque transfer * Ratchet function * Fine-pitched teeth for small return angle; switchover ring (right, fixed, left) * Maximum torque of up to 50 Newton meters * Quick-release chuck with Rapidaptor * Strong permanent magnet for secure fit of bits * Multi-compartment Kraftform pistol handle for greater leverage * 1/4 in. hex socket head take-up and Rapidaptor technology for low fatigue working and rapid bit change; magnetic
Not Yet Reviewed
$100.99
On Sale
CHANNELLOCK 171-Piece Mechanic's Tool Sets
There is nothing more important to a mechanic than tools. CHANNELLOCK 171-piece mechanic's tool sets are perfect for the work you do. That's why you should choose the legendary strength and reliability of CHANNELLOCK. All of the tools stay in place when you lug the case around. You don't have to look for your sockets--they are all laid out and organized. Contents include: * 1/4 in., 3/8 in., and 1/2 in. 45-tooth ratchets * (20) 1/4 in. sockets * 35 standard and deep 3/8 in. sockets * (12) 1/2 in. sockets * 2 Spark plug sockets * 3 in. extensions * Magnetic bit driver * 40 Phillips, slotted torx, pozi, square, and hex driver bits * 20 SAE and metric nut driver bits * 18 SAE and metric hex keys * 12 SAE and metric combo wrenches * Magnetic parts tray * Storage case
Not Yet Reviewed
$199.95
$179.95
Times Microwave Systems® Coaxial Connector Crimping Tools
Times Microwave Systems Coaxial Connector Crimping Tools are specifically sized for Times Microwave Systems cables and crimped-shield coaxial connectors. Their CT-U ratcheting universal crimp handle uses interchangeable dies (same ones as HX-4) selected by cable type. Or, their CT series ratcheting crimp tools with non-removable dies work with Times cables from the smallest to the largest. Simply choose the tools or dies by cable type for the crimped shield connectors you need. Attach your Times Microwave Systems coaxial connectors with genuine Times Microwave Systems Coaxial Connector Crimping Tools from DX Engineering. LMR® is a registered trademark of Times Microwave Systems.
( 4 )
$203.99
—
$229.99
InnovAntennas Ferrite Bead Baluns
InnovAntennas Ferrite Bead Baluns are fully assembled and ready to install, to achieve the absolute best performance from an InnovAntennas Yagi or other balanced terminal antennas. In contrast to wound baluns, ferrite bead choke baluns have the advantage of covering a wide frequency range for multiple bands. As required for most Yagi antennas from InnovAntennas with 50 ohm direct feed, ring terminals are installed on one end for the studded feedpoint connection. The other end is terminated in either Type-N or SO-239/UHF Female for the appropriate band coverage and impedance. Heat shrink filled with a UV-resistant adhesive provides a waterproof cover over the ferrite beads on the cable and the connector. Why do I need a Balun on my Yagi? Ferrite Bead Baluns offered by InnovAntennas provide very important functions of a balun, which is not well understood. For proper antenna performance, a ferrite bead balun inhibits common-mode current two important ways; A) it prevents RF flow on the outside the coax shield cable when transmitting, and B) it prevents stray RF noise picked up by the coax cable shield from entering the antenna system and affecting the receiver. What happens on the antenna without a RF choke balun? Several problems can occur. When an unbalanced feedline is connected directly to a balanced antenna with no BALUN in place, common-mode currents will run on the outside of the coaxial cable shield. The Yagi feedpoint is forced out of balance causing a skew and diminished beam antenna pattern and gain. A loss of Front-to-Back ratio (F/B) can occur, as well as detuning that affects antenna frequency, potentially causing increased SWR. In addition to the pattern distorting performance drop, radiation from the antenna feedline can cause interference to home and business electronics. The other very important benefit of using a wideband ferrite bead balun is to reduce received noise in certain situations. While the noise produced by many household products is normally at very low levels, sensitive ham radio receivers can be affected, which can prevents weak signals being heard. RF noise picked up on the coax cable shield will enter the antenna system feedpoint when no ferrite bead choke balun is installed at the feedpoint.
( 3 )
$119.99
Leatherman Wave + Multi-Tools
An international best-seller, the Leatherman Wave + has all the essential tools of the original—with the addition of replaceable, durable wire cutters. All 18 tools can be opened and locked quickly, conveniently to tackle any task. Many of these tools are outside-accessible, so you can use them when the multi-tool is folded and closed.
Not Yet Reviewed
$129.95
Wera Tools Kraftform Kompakt Turbo Imperial Screwdriver with Bits
Wera Kraftform Kompakt Turbo Imperial screwdriver with bits allows users to be able to carry out screwdriving processes faster without compromise. The screwdriver is precise, allows powerful screwdriving, and is much faster than a conventional screwdriver. A universal gear is integrated into the screwdriver handle, and it quadruples the working speed with smooth couplings—purely mechanically. One hand holds the front part of the handle, the other hand turns the rear part of the handle. The turbo function can be switched on or off at the push of a button. Turning it off is recommended for tightening and loosening with high torque, as well as for fine adjustments. Thanks to the innovative Wera Rapidaptor bit holder, the Kraftform Turbo Imperial can be used with all conventional 1/4 in. hexagon bits for a wide variety of screw profiles. Product Features: * Four times the screwdriving speed thanks to the turbo function (purely mechanical without the use of a battery) * Activate and deactivate the turbo function by a simple push of a button * Turbo function especially for smooth couplings * Can be used without the turbo function like a normal screwdriver for couplings with steadily increasing torque, e.g. for screw connections in wood * Robust, maintenance-free gear made of steel * Wera VDE blades are interchangeable—individually tested as per IEC 60900, the VDE version of the Kraftform Turbo hand holder 827 T i guarantees fast and safe working even in live environments (up to 1,000 volts)
Not Yet Reviewed
$149.99
Leatherman Surge Multi-Tools
Leatherman Surge multi-tools are real powerhouses. They are built with their largest pliers, longest multi-tool blades, and easy-to-use locks. A unique blade exchanger, replaceable premium wire cutters, and four outside-opening blades give you quick access to the tools you use most. Leatherman Surge tools are for tough jobs and the hands that do them.
Not Yet Reviewed
$159.99
Leatherman Signal Multi-Tools
A perfect fit for any adventure, the Leatherman Signal combines 19 useful tools into a compact 4.5 in. size. This multi-tool readies you for the unexpected with its fire-starting ferro rod, 420HC combo blade, and emergency whistle. Tighten gear with the customizable bit driver and anchor your tent stakes with the built-in hammer. Gear up and go further with the Leatherman Signal. Tools include DLC coating on stainless steel; multiple handle finishes are available.
Not Yet Reviewed
$149.95
Wera Tools Kraftform Kompakt Turbo Screwdriver with Bits
Wera Kraftform Kompakt Turbo screwdriver with bits allows users to be able to carry out screwdriving processes faster without compromise. The screwdriver is precise, allows powerful screwdriving, and is much faster than a conventional screwdriver. A universal gear is integrated into the screwdriver handle, and it quadruples the working speed with smooth couplings—purely mechanically. One hand holds the front part of the handle, the other hand turns the rear part of the handle. The turbo function can be switched on or off at the push of a button. Turning it off is recommended for tightening and loosening with high torque, as well as for fine adjustments. For high-quality, innovative tools that are built to be rugged, reliable, and reasonably priced, Wera Tools has got you covered. Product Features: * Four times the screwdriving speed thanks to the turbo function (purely mechanical without the use of a battery) * Activate and deactivate the turbo function by a simple push of a button * Turbo function especially for smooth couplings * Can be used without the turbo function like a normal screwdriver for couplings with steadily increasing torque, e.g. for screw connections in wood * Robust, maintenance-free gear made of steel * Wera VDE blades are interchangeable—individually tested as per IEC 60900, the VDE version of the Kraftform Turbo hand holder 827 T i guarantees fast and safe working even in live environments (up to 1,000 volts)
Not Yet Reviewed
$201.99