Availability
132 Results Found For "in-line"
Preformed Line Products Big Grip Dead Ends
Preformed Line Products Big Grip galvanized Dead Ends are available in multiple sizes to facilitate the guy line installation of your tower. Using genuine Preformed Line Products Dead Ends will give you an added sense of security, knowing that the investment you've made in your tower is stable and safe.
( 5 )
$109.99
Loos Professional Guy Line Tension Gauges
Loos Professional Guy Line Tension Gauges offer a series of instruments to accurately measure the tension in steel guy cables from 3/32 up to 3/8 in. diameter. These gauges are designed for setting the proper tension in applications such as supporting cables for Amateur Radio towers, professional radio towers and the standing rigging of sailboats. They are also handy for tensioning steel cables on large tents and other structures. These "Professional Models" provide higher durability, accuracy and convenience of use when compared to other brands. Manufactured of rugged anodized aluminum, these gauges are corrosion resistant and will give many years of quality service. You may hook these gauges be on the wire and they will remain in position while the tension is adjusted. "Just watch the pointer move." Detailed operating instructions are included with each tension gauge. Click on "More Detail…" for information on the size of gauge you'll need. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Do you want to easily balance your guy-line tension? Take the slack out of your guy lines! Order one of these Loos Professional Tension Gauges from DX Engineering.
( 6 )
$162.99
—
$169.99
DX Engineering Phillystran Steel Tail Kits
DX Engineering Phillystran Steel Tail Kits provide the appropriate transition from non-metallic to metallic guying cable at the ground end of tower guying systems. Steel Tail Kits are available for Phillystran HPTG-4000I, -6700I and 11200I Guy Lines. What is the function of the steel tail? Here is the recommendation by Phillystran, the manufacturer of HPTG-I High Performance Tower Guy non-metallic guy lines: A steel tail is a length of EHS (Extra High Strength) steel guy line connecting the HPTG-I assemblies to the turnbuckle or guy anchor. The steel tail protects the HPTG-I assemblies from damage due to brush fires, lawn maintenance equipment or vandals. The steel tail length should be sufficient to get the bottom end of the HPTG-I assembly above arm's reach, or above brush tops (if located in a marsh or tall brush area). The HPTG-I should never pass through tree limbs or be allowed to rub against poles or trees. The steel tail allows for easier guy length calculations and serves as a guy tension monitoring point, as well as a safer area to attach guy grips during guy line installation and tensioning. Eliminating the hassle of buying a length of steel cable and obtaining a special tool to cut it, DX Engineering Phillystran Steel Tail Kits provide everything needed to isolate your tower's non-metallic guy cable from harm. Three different size kits are available for different tower guying requirements provided by Phillystran guy cables 4000I, 6700I and 11200I. Here are the items included in these innovative Steel Tail kits: - 12 ft. EHS steel guy line, Galvanized, in three kit sizes, 3/16 in., 1/4 in. or 5/16 in. - Porcelain Guy Line Strain Insulator, 502 or 504 depending upon kit size - Galvanized Steel Preform Dead End Big-Grips for EHS steel guy line, two per line - Heavy Duty Thimble, galvanized steel, appropriately sized for each kit - Cable Ties, UV protected Black, four, to secure installed Big-Grip ends Note: Phillystran guy line and Preform Dead End Big-Grips for Phillystran are not provided in this kit and must be ordered separately. DX Engineering Phillystran Steel Tail Kits provide Porcelain Guy Line Strain Insulators for the top end of the Steel Tail so that the galvanized steel Big-Grips for the Phillystran and for the EHS Steel Guy Lines do not touching and make RF noise. For three different size Phillystran guy line, HPTG-4000I, -6700I and -11200I, these kits are available exclusively from DX Engineering in 3-packs for each level of tower guying.
( 2 )
$201.99
—
$239.99
DX Engineering Bent Pin Shackles
DX Engineering Bent Pin Shackles are used for guy line attachment to towers for Amateur Radio and commercial applications. Also known as a clevis in the power industry, these shackles are specially designed with a removable bent bolt and locking nut to go through the outer hole of the matching guy strain insulators commonly known as the "502" or the "504" in ham radio tower work. Forged from 1/2 in. steel and hot dip galvanized, these Bent Pin Shackles have a minimum ultimate strength of over 12,000 lbs. and have a rounded end large enough to be used around a tower leg. However, they are typically connected to a guy attachment tower ear or guy bracket, with a screw pin shackle used as a link. The insulators that fit inside of this shackle accept the guy line big grips from either metal or non-metallic guy lines. For those who already have insulators, Bent Pin Shackles are offered in a set of three for each level of guying. We sell the matching DXE-502 and DXE-504 insulators in sets of three. Also available are two kits that include three Insulators of either size and three Bent Pin Shackles. Look to DX Engineering for the unique tower hardware that you need.
Not Yet Reviewed
$231.99
ROHN Turnbuckles
ROHN Turnbuckles are constructed with a steel sleeve surrounding internal steel screws used to pull anchor points closer together by turning the turnbuckle body. They are ideally suited for tensioning mast or tower guy lines. These turnbuckles are galvanized for weather resistance and long life. Working load for these turnbuckles starts at 1,200 lbs. and then goes up. Break strength, also known as ultimate strength, is 6,000 lbs. and up. If you are raising a new mast or tower, or just performing maintenance on your existing installation, these ROHN Turnbuckles from DX Engineering will take the strain, year after year after year!
Not Yet Reviewed
$116.99
DX Engineering Rotator Control Line Protectors
DX Engineering Rotator Control Line Protectors are custom made surge protectors designed for use on rotator cables - up to 8 conductors. We routinely protect power and antenna cables, why ignore rotator control cables? These protectors are also ideal for control lines of remote antenna switches and any low voltage control system where voltages are normally below 60V DC or AC. External terminals allow convenient connection while the surge devices remain securely protected inside the metal enclosure. DXE-IS-RCT features include: * Weatherproof metal enclosure with cover, mounting stud and terminal gaskets to deter water from entering the enclosure. * Terminal strips to connect up to eight rotator control wires * 1/4 in. x 20 mounting stud allowing multiple mounting configurations * Each line connection has an individual shunt MOV for maximum surge protection * Voltage spikes exceeding 82 Vdc (in either polarity) will be shunted to ground * RoHS compliant construction DXE-IS-RCT protectors are recommended to be installed on a tower leg or ground rod using an optional DXE-J-1 or DXE-J-2 Grounding Clamp or a DXE-UCGC Copper Ground Rod Clamp. The location you choose for your DXE-IS-RCT should provide a good, low-impedance ground connection. The surface to which a grounding clamp is connected should be thoroughly cleaned to a bright-colored surface and then treated with a conductive anti-oxidant coating. This procedure will minimize weather-related complications and improve conductivity for your DXE-IS-RCT. DXE-CCK Copper Cleaning Kits provide cleaning pads and copper paste which is ideal for this application. If a tower or mast is being used and is properly grounded, your DXE-IS-RCT may be connected to the base of that structure just above the grounding point. For best results, follow the installation instructions carefully. As with all electronic equipment, observe proper safety considerations. For example: Do not install your DXE-IS-RCT if there is a storm anywhere in your area. Do not adjust or touch the grounding system equipment when there is a storm anywhere in your area. Make sure all power is removed before making any adjustments or working on any ground system or grounding components. DXE-IS-RCT Specs: Surge Energy: 6500 A or 38 J (Max energy 8/20) Response Time: 10 ns typical, 25 ns max. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For the best protection of your rotator systems, order and install your DX Engineering Rotator Control Line Protectors and keep the voltage surges off of your control lines.
( 10 )
$189.99
ICOM Transceiver Plug-In Modules
ICOM transceivers have a plethora of built-in features. But, the fun doesn't have to stop there, with their line of Transceiver Plug-In Modules that add additional capabilities, including, Bluetooth Units, voice synthesizers, decoders, and D-STAR digital units.
( 13 )
$101.99
PolyPhaser IX DC Surge Protectors
PolyPhaser IX-1T Data Phone Line DC Surge Protectors are designed to be lightning protectors for 2-wire telephone landline trunks or DC control circuits. They are fully weatherized, modular high-speed digital data DC line protectors and incorporate one T-board for use in high-speed network and DC voltage applications. Their unique design allows them to be used in a variety of voice and data applications. PolyPhaser IX DC Surge Protectors offer fast response times and lower differential voltages and harmonic energies than gas tube protectors. -- Data Rate: Up to 25 Mbps -- Operating Voltage: 48 Vdc -- Turn-On Voltage: +/- 210 volts typical -- Max Holding Current: 400 mA @ +20 degrees C -- Operating Temperature: -40 to +65 degrees C
Not Yet Reviewed
$149.99
Bushcomm OFO Wire Feeder Option and NVIS Kits
Want to enhance the lower-frequency operation on your antenna? Have a look at Bushcomm's open feeder kits. Bushcomm OFO Wire Feeder Option and NVIS Kits are open feeder options for most BBA Series Bushcomm HF antennas. Designed to complement their BBA (multi-wire) models and similar antennas, the OFO NVIS kits are easily constructed and attached to your existing Bushcomm multi-wire antennas. Lightweight and with low visual impact, OFO kits, when assembled, measure just over 10 meters in length. Bushcomm OFO kits are constructed with extremely durable composite-material spacers utilizing snap-lock wire holders, as well as quality stainless steel wire and fittings. OFO Kits are complete kits of most things necessary to install them yourself. Special OFO features: * Improved Performance on Lower Frequencies * Short Path NVIS improvement * Stainless Steel wire Installation kit contents: * 2 x stainless steel nuts * 2 x 10-meter lengths of stainless steel wire (with loops fitted) * 2 x stainless steel bolts * 2 x stainless steel washers * 6m cord (2 x 3m) * 10 x special Wire Snap-Lock Spacers * Instructions * Extra ferrules (in case of length adjustment) Mechanical details: Shipping Weight: 800 grams, 1.76 lbs. Length: 10 meters; 33 ft. Important Note: Works with BBA-100 series antennas when used in a horizontal configuration only (Not Inverted "V"). Not compatible with BBA-600 or BBA-1Kxx series antennas. Bushcomm offers many specialized wire antennas and wire antenna products. To enhance the lower frequency and NVIS performance of your BBA series antennas, order Bushcomm OFO Wire Feeder Option and NVIS Kits from DX Engineering.
Not Yet Reviewed
$207.99
Mastrant Antenna Support and Guy Line Ropes
Mastrant Antenna Support and Guy Line Ropes are available in several sizes and strength ratings, perfect for support of wire antennas, vertical antennas and antenna masts, as well as support of Yagi booms and elements. Mastrant ropes are of the highest quality for strength and are UV-protected for extended longevity. MASTRANT-O is a highly reflective rope (bright orange plus braided reflective tape) based on long-term proven Polyester (Dacron) product line. It is designed for maximum visibility in public places such as Field Day and POTA activities. Like all Mastrant ropes, it is UV stable and resistant to all weather conditions. It has low weight, great abrasion resistance, great durability and is nonconductive (no effect whatsoever on your antenna). Moreover, in contrast to ropes made from aramid fibers (Kevlar, Vectran, Technora, Twaron), it has knot strength about 60 %. Mastrant-P and Mastrant-R Ropes are stronger than other synthetic ropes of the same size, made from proven modern polyester. Mastrant-Q is a new rope made from a blend of polyester and polypropylene, designed specifically for guying applications. It offers an excellent performance-to-price ratio and has a knot strength of approximately 60%. It replaces Mastrant-P in diameters of 6 mm (1/4 in.) and larger. Mastrant-S is a similar polyester/polypropylene rope, distinguished by its highly reflective strands for increased visibility. Mastrant-M is their highest strength rope with the Dyneema® DM20 core, a superior synthetic rope offering high performance at an affordable price. Very high strength, negligible elongation, very low weight, and great abrasion resistance are all attributes that make Mastrant-M the best rope for guying. Larger, stronger sizes of Mastrant-M are used in Europe and other parts of the world for tower guying. Durability and safety are of prime concern to ensure that an antenna installation remains fully operational for a long time. Antennas and guy lines are exposed to changing weather conditions, mechanical strain, UV radiation, humidity, and more. These non-conductive synthetic fibers have all the necessary qualities: high strength, negligible stretch but good flexibility, long life, low moisture collection, fast drying, a minimum bending radius adding the ability to tie knots, good UV radiation resistance, weather durability and resistance to acids and alkali. Conversely, steel guying wires are heavy, difficult to work with, and their strength deteriorates with time due to corrosion and general aging. Electrical conductivity of steel guys is an undesirable feature, as they interact with the antennas and adversely modify radiation patterns. Thanks to recent developments in synthetic materials, both amateur and professional users are changing over to non-conductive guys and ropes. Mastrant offers these products for a variety of applications, from thin support lines used for wire antennas and beams, to rope guys for supporting small and portable masts and vertical antennas. When you need quality rope to install, replace, or modify your antenna systems, consider Mastrant Antenna Support and Guy Line Ropes, now available from DX Engineering.
( 186 )
$109.99
—
$244.99
Carlson Mid-Level Guy Line Assemblies
Carlson Mid-Level Guy Line Assemblies are engineered specifically for use with the Carlson Tower Lift on Rohn 25G series towers. This kit includes three mid-level guy line assemblies, each consisting of a 60-foot guy line pre-attached to a durable rung bracket. Together, these assemblies allow you to effectively organize and control guy lines so they do not interfere with the lift's movement as it travels up and down the tower. Designed for both new installations and retrofits, these patent-pending assemblies integrate seamlessly with the lift system. When upgrading an existing standing tower with mid-level guy lines, simply replace the original lines with these specially designed assemblies to maintain proper function of the tower lift. The complete Mid-Level Guy Line Assemblies kit ships in a compact 12x12x6in. box and weighs 16lbs.
Not Yet Reviewed
$199.00
Coaxial Dynamics Plug-In Elements
Coaxial Dynamics Plug-In Elements are calibrated to exacting specifications to assure interchangeability with one another, with any Coaxial Dynamics and Bird Electronic RF power instrument in the 7/8 in. line size - whether purchased today or 20 years ago. Their calibration is for any 30 microampere full scale meter movement, including Bird Model 43 and Coaxial Dynamics meters, so these elements may be used interchangeably with very good results. Readily available in several full-scale power ratings from 5.0 Watts to 10,000 Watts and eight frequency ranges starting with 2 to 30 MHz through 1.1 to 1.8 GHz. There are Coaxial Dynamics Plug-In Elements to satisfy most Amateur Radio and commercial RF testing requirements. Element accuracy is maintained by calibrations using RF Power Standards (NIST traceable), supported by more than 30 years of history and experience! Your confidence in the quality and dependability of Coaxial Dynamics Plug-In Elements is secured with the exacting manufacturing techniques and high tolerances that produce consistent quality and repeatable accuracy from element to element. Each element carries a Coaxial Dynamics Two Year Limited Warranty. Whether you are monitoring station power, checking antennas, doing bench repairs or just need accurate equipment output readings, Coaxial Dynamics Plug-In Elements,interchangeable with Bird Electronic Corporation elements, provide frequency coverage and power ratings for your Directional Wattmeter. Order your own high-quality Coaxial Dynamics Directional Wattmeters and Plug-In Elements from DX Engineering!
( 15 )
$151.20
—
$236.00
Paradan Radio Antenna Disconnect Actuators for Ladder Lines
Paradan Radio Antenna Disconnect Actuators for Ladder Lines reduce the chance of station damage from lightning surges. The Antenna Disconnect Actuator automatically disconnects the antenna from your tuner and radio and grounds the antenna. It helps prevent static discharge, surges, and the effect of nearby lightning strike pulse events from damaging your tuner, radio and associated equipment. This Antenna Disconnect Actuator is excellent for protecting remote stations from lightning surge. This Antenna Disconnect Actuator operates on 10 to 18 Vdc, which may be supplied by a transceiver equipped with a DC output. Or, connect it to your power supply that you turn off when not operating. When the power is turned OFF, the antenna's two binding posts are shorted together and grounded, and shack side binding posts are disconnected. When powered ON, the Actuator reconnects the antenna for normal operating. Just insert each wire from the twin lead ladder-line into the binding post hole and secure by tightening the red and black post nuts. It comes with a Ring Terminal, four Barrel Connectors, and a Powerpole® connector pair. (® registered trademark of Anderson) Specifications of the Paradan Radio Antenna Disconnect Actuator for Ladder Lines: • Power Handling: greater than 1.5 kW • Insertion Loss: < 0.05 dB @< 29 MHz, 0.4 dB @ 54 MHz, 1 dB @ 144 MHz • Relay Operating Voltage: 10-18 Vdc • Relay Operating Current: 60 mA when turned ON to connect antenna. 120 mA for the DUAL unit • LED: Illuminates green when relays connect the antenna for operating • Relays: Two relays w/15 Amp contacts each, protected for reverse spikes. Four relays in DUAL • Case: Isolated from the binding posts, but then connects to both Antenna side binding posts when NOT energized. • Ladder Line Connectors: 5-way binding posts. Accepts up to 10 AWG wire • Relay Control Wire: 6 Ft, two-conductor 18 AWG with RCA phono plug (suitable for some transceivers) • Control Input: Diode protected against reverse polarity; RF filtered • Active Lightning Protection: Gas Discharge Tube on Antenna input, active when ON • Case Ground Stud: 1/4-20 with washers, lock washer and nut • Case: Die-cast aluminum, black paint, white print, water resistant • Dimensions (WHD): 4.8 x 2.6 x 1.6 in., Mounting tabs w/4 holes @ 5.25 in. and 1.5 in. centers
( 2 )
$130.00
COMTEK Current Feedline Chokes
The updated COMTEK CFC-50A 50 ohm Feedline Chokes consist of 75 heavy-duty mix-31 RF choke beads on a length of RG400 PTFE coax terminated at both ends with silver-plated PTFE PL-259/UHF male connectors and the correct length of heat-shrink tubing. COMTEK Current Feedline Chokes ensure that stray RF does not flow on the outside shield of your feedlines. They are typically installed at the antenna feedpoint connection. They may also be used where a long run of feedline leaves a remote antenna switch or a tower. They are also very effective at the shack end of a long run of on-the-ground or above-ground coaxial feedline, to block unwanted RF signals and noise picked up on the shield. These chokes provide excellent common mode impedance and handle up to 5 kW from 1.8 to 54 MHz. These chokes are assembled except for the tubing needs to be installed and heat-shrinked after the choke is positioned as it will be installed.
( 14 )
$131.49
I0JXX LNA Receive Preamplifiers
I0JXX LNA Receive Preamplifiers offer high gain amplification with very low internal noise for VHF and UHF amateur band optimized devices used world-wide by experimenters and contest enthusiasts. Excellent receive-only performance at low current is achieved by these compact 12VDC units, available in two connector configurations: SMA female input and output, or Type N male input and female output. LNA (low noise amplifiers) offer preamplification using ultra-low noise components as good or better than most receiver front ends, to preserve the capabilities of a low-noise antenna system. Typically, they do not have relays in the signal path that might introduce noise or loss. These devices can be used directly in most receive applications and may be used to build a sequencer-controlled Receive-Transmit relay system for two-way VHF or UHF communications. I0JXX LNA Receive Preamplifiers are built with high quality components including low-loss FR4 copper clad PCBs and environmentally safe tri-chrome high-conductivity passivated aluminum chassis. View the specific device specifications on each part detail page.
Not Yet Reviewed
$191.99
—
$223.99
Ciro Mazzoni Loop Antenna Replacement Parts
Ciro Mazzoni Loop Antenna Replacement Parts are stocked for those who need to update or reinstall their Loop Antenna by I3VHF. Parts are all original; exactly the same supplied with each model, MIDI, BABY and STEALTH models, including Actuator motors and Isolator Arms. The updated, current model ATU 2.0 replacement (MZZ-COM1001) is the same as supplied with all three new antennas. So are the Universal AC Power Supply (MZZ-COM1002) and the USB Keyboard (MZZ-COM1003). The Stainless Steel Mast Clamp and hardware (MZZ-COM1005) fit the MIDI or the BABY Loops. The MZZ-BLA1010 aluminum adapter plate is supplied with BABY Loop Tripods, available here as a replacement. Order Loop Antenna by I3VHF Replacement Parts here at DX Engineering.
( 7 )
$105.99
—
$122.99
Momobeam RFC-LI 1kW Single Core Line Isolator RF Choke Baluns
Momobeam RFC-LI 1kW Single Core Line Isolator RF Choke Baluns are efficient broadband common mode current chokes designed to ensure proper current balance and clean transitions between balanced resonant antennas—such as dipoles and Yagi antennas—and unbalanced coaxial feed lines. By delivering excellent suppression of unwanted common mode current across a wide frequency range, these RF chokes help maintain optimal antenna performance and protect sensitive station equipment. Common mode currents can cause a variety of station problems, including elevated receiver noise levels, inaccurate SWR measurements, and interference affecting nearby electronic devices or equipment within the shack. The RFC LI effectively prevents these issues by stopping common mode current from traveling on the outside of the coaxial shield, ensuring cleaner transmit and receive performance under all operating conditions.
Not Yet Reviewed
$144.99
Momobeam RFC-LI 2kW Dual Core Line Isolator RF Choke Baluns
Momobeam RFC-LI 2kW Dual Core Line Isolator RF Choke Baluns are efficient broadband common mode current chokes designed to ensure proper current balance and clean transitions between balanced resonant antennas—such as dipoles and Yagi antennas—and unbalanced coaxial feed lines. By delivering excellent suppression of unwanted common mode current across a wide frequency range, these RF chokes help maintain optimal antenna performance and protect sensitive station equipment. Common mode currents can cause a variety of station problems, including elevated receiver noise levels, inaccurate SWR measurements, and interference affecting nearby electronic devices or equipment within the shack. The RFC LI effectively prevents these issues by stopping common mode current from traveling on the outside of the coaxial shield, ensuring cleaner transmit and receive performance under all operating conditions.
Not Yet Reviewed
$180.99
Momobeam RFC-LI 4kW Dual Big Core Line Isolator RF Choke Baluns
Momobeam RFC-LI 2kW Dual Core Line Isolator RF Choke Baluns are efficient broadband common mode current chokes designed to ensure proper current balance and clean transitions between balanced resonant antennas—such as dipoles and Yagi antennas—and unbalanced coaxial feed lines. By delivering excellent suppression of unwanted common mode current across a wide frequency range, these RF chokes help maintain optimal antenna performance and protect sensitive station equipment. Common mode currents can cause a variety of station problems, including elevated receiver noise levels, inaccurate SWR measurements, and interference affecting nearby electronic devices or equipment within the shack. The RFC LI effectively prevents these issues by stopping common mode current from traveling on the outside of the coaxial shield, ensuring cleaner transmit and receive performance under all operating conditions.
Not Yet Reviewed
$229.99
COMPACtenna 2M/440+ Optimized High Performance Dual-Band Ham Radio Antenna
COMPACtenna 2M/440+ provides high performance using a unique Electric-Magnetic Field Diversity design, Patent No. 9,407,001. Superior Omni-directional coverage is achieved far beyond what would be expected for the antenna size. The multi-faceted geometric design of the antenna includes "extended flat monofilar spiral Tesla-like coils" that serve as the LCR matching system, resonating as an integral part of the signal field generation. No external or internal electronic lossy matching components are used. This design establishes diverse electromagnetic fields resulting in signal stability and performance greater than expected in NLOS (Non-Line-Of-Sight) environments, reducing the effects of ionospheric polarization shifts. COMPACtenna 2M/440+ Specifications: * Frequency Coverage: 144-148 MHz, 430-450 MHz * Power Rating: 100 W 2M; 75 W 70cm * Duty Cycle, Max. Power: 1 minute transmit limit in a 2-minute period * Repeater Operation: 30W maximum at the antenna * Maximum Ambient Temperature: 130 degrees F (hotter conditions, sun exposure, limited air flow reduces duty cycle) * Gain: +5 dB-MEG: Due to diverse EM fields of the Magnetic Field Resonator, performance is greater than predicted by singular polarization field-range tests * SWR, nominal: < 2.1:1 144-148 MHz, 430-450 MHz. Best SWR on VHF frequencies when COMPACtenna 2M/440+ antenna is mounted on an upper corner of a vehicle, NOT center mount. Flat style magnetic mounts provide the best SWR results. SWR varies with size and shape of the vehicle.
( 26 )
$199.00
ICOM Base Station Speakers
Designed for use with a wide variety of communication equipment from various makers, you may optimize your audio with ICOM Base Station Speakers. Top-of-the-line base station speakers improve listening and intelligibility. They may remove some of the strain of chasing weak signals or sorting out pileups. That will reduce operator fatigue. These are incredibly great-sounding speakers that feature distinctive styling and finishes to enhance your station and its transceivers. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For effective communications discover the crisp, clean sound of ICOM Base Station Speakers, available from DX Engineering!
( 66 )
$177.99
—
$209.99
Clearance
Phonema Miranda S Speakers
Phonema Miranda S Speakers are designed to deliver high-quality audio with special attention to the intelligibility of SSB signals. The high-quality wide range driver is specifically positioned into a custom designed medium density fiber cabinet which is lined internally with a variety of specially selected acoustical foam materials. The resulting sound of Miranda S is clear and sharp, with a frequency response that makes it easy to understand both voice and CW signals. Bass is present and well controlled when listening to broadcast signals. The midrange curve suits voice frequencies so that they stand out above the QRM, all with the warmth of a hand-crafted wooden speaker that reduces listener fatigue. The Miranda S is a gorgeous looking and great sounding speaker that is perfect for many new and old transceivers. This 8-ohm speaker is a convenient size that matches the listed rigs, but it will work for virtually any radio. The rich and articulate sound is perfect for listening to your transceiver or receiver. Miranda S Speakers offer these features: * Speaker Cabinet Material: MDF (medium density wood fiber) * Internal Materials: Acoustic Foam AG150 and Basotect * Pull-out Bail under the front to adjust height and angle to match radio * Power Handling: 10 w * Impedance: 8 ohms * Frequency response: 80 - 18,000 Hz * Sensitivity: 83 dB * Driver protection: IP64 * Input, rear panel: Mono 3.5mm jack * Dimensions (WHD): 6.02 x 3.98 x 10.04 in. (153 x 101 x 255 mm) * Weight: 3.48 lbs. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Phonema has gained an excellent reputation for quality and value. Order Phonema Speakers from DX Engineering and discover the difference a quality speaker can make!
( 7 )
$241.99
$217.79
—
$241.99
DX Engineering Clifton Laboratories Z10046 High-Gain Preamplifiers
DX Engineering Clifton Laboratories High-Gain Preamplifiers are adapted, assembled versions of the circuit project kits developed by Jack Smith, K8ZOA (SK). This is our version, the DXE-Z10046B-PM High-Output Preamplifier with 23dB gain, which is virtually identical to its predecessor in specs and performance. This versatile module preamp can plug directly into the DXE-NCC-2 and DXE-RTR-2 units. Also, you can easily create a separate high-performance in-line receive-only preamplifier with the DXE-Z10046B-PM module installed in our DXE-DMC-2 Dual Module Chassis. The legacy built by Jack Smith, K8ZOA (SK) with Clifton Laboratories lives on with select products by DX Engineering.
( 1 )
$109.99
Synthetic Textile Industries Antenna Support Rope
Synthetic Textile Industries Antenna Support Rope is the premium double-braided Dacron/polyester rope that Amateurs and SWLs have been using for years! Available in several sizes and spool lengths, these superior antenna support ropes are not weakened by decay or mildew and provide excellent resistance to abrasion. The color sealed black polyester yarn used in the braided jacket also protects the cord from damage due to ultra-violet light. Order some Antenna Support Rope today, so you will have it on hand for your next antenna project! This rope is perfect for supporting your wire and vertical antennas, but support rope should NOT be used for tower guying. For your tower guying needs, check out our Tower Guy Lines in the Tower Department here at www.DXEngineering.com
( 95 )
$116.99
—
$149.99