Availability
5 Results Found For "soldering"
American Beauty Soldering Tool Parts and Components
If American Beauty's soldering tools were of typical quality, then they wouldn't offer an extensive list of soldering tool parts and components. In fact, their tools are designed to withstand the stress of production-line usage in the most difficult and rigorous industrial environments. However, as those familiar with soldering are well aware, soldering tools require regular maintenance and the occasional replacement of consumable parts. Historically, soldering-tool manufacturers had whole departments set up to service tools for their customers. As budgets tightened and these departments were eliminated, tools that were meant to last a decade or more were tossed in the trash, just like the cheap imports. American Beauty soldering tools were designed from the beginning to be serviceable! Their heating elements, connectors, handles, cord sets, foot switches, electrodes, and many other kinds of parts are replaceable. American Beauty even offers Maintenance kits and instructions on how to care for, and extend the life of, their tools! To save money on tools, you need to buy a quality tool that's right for the job...as well as serviceable. American Beauty soldering tool parts and components are now available from DX Engineering and will provide the means for you to keep your soldering tools working (and in great shape) for a long, long time!
Not Yet Reviewed
$1,030.00
—
$1,315.00
American Beauty Resistance Soldering Systems
American Beauty Resistance Soldering Systems offer the most advanced and complete line of resistance soldering systems available anywhere in the world. You'll find power ratings between 100 and 3,000 watts, and various tool styles and compositions. You may use them to work on anything from tiny hobby/craft projects to soldering large copper plumbing. Here are just a few of the advantages: The concentrated heat reduces soldering time by many times over. Poor solder joints are often the result of insufficient heat throughout the joint, creating weak spots; these systems eliminate such problems. Traditional soldering methods may introduce too much heat into surrounding areas, damaging critical components or de-soldering previously soldered joints. Using resistance soldering systems will improve quality and reduce waste! Resistance soldering systems are ergonomic and versatile. Lightweight hand pieces cool within seconds, greatly reducing the likelihood of repetitive strain-injury and virtually eliminating the burn risk for the user. Versatile systems allow for easy access to restricted areas on circuit boards and inside cabinets. Resistance soldering systems can save you money! Instant heat means you're not paying to heat a soldering station all day long. Electrodes last twice as long as soldering tips and don't require constant re-wetting, thereby reducing consumable waste. American Beauty Resistance Soldering Systems get the job done. Stop trying to perform your difficult soldering operations the same old way with the same old tools. Contact DX Engineering to own of these American Beauty Resistance Soldering Systems today!
Not Yet Reviewed
$1,199.00
—
$1,499.00
DX Engineering RG-213/U 50-ohm Bulk Coaxial Cable
DX Engineering RG-213/U is a low-loss, 50-ohm, standard-spec Coaxial Cable with a non-contaminating Type II PVC jacket. This is unterminated bulk cable that is sold by the foot. See Coaxial Cable Assemblies for coax with connectors. Specially manufactured for DX Engineering, RG-213/U feedline is perfect for outdoor use due to its excellent UV resistance and durability in direct-bury applications. Specially suited for high-power amateur stations, RG-213/U provides a lower loss solution for long cable runs at any power level. Featuring a solid polyethylene dielectric, this is the coax that withstands constant movement and flexing on tower mounted rotatable and directional beam antennas. DXE-213U is recommended by contest station owner K3LR for installation at tower top as "rotator loop" coax for HF and VHF. DX Engineering RG-213/U is easily terminated with standard solder or crimp style PL-259 and N connectors designed for RG-8 sized, 0.405 in. cables. DX Engineering Next Generation hybrid PL259s with crimp shield, solder center attachment are also a great choice for DXE-213U coax cable. Note: For additional product information, please look at the files under the "Documentation" tab.
( 110 )
$1,299.99
DX Engineering Tinned Copper Radial Wire Kits
DX Engineering Tinned Copper Radial Wire Kits include plentiful quantities of biodegradable staples and tinned crimp ring terminals that are easily soldered. Along with spools of the same wire as used by the most successful contest stations and DX enthusiasts for their ground-mounted vertical antennas, these kits will help your antenna system achieve optimal performance. The 16 AWG tinned solid copper wire in these kits provide an extremely cost effective solution for the high-count, full-size ground radial wire systems that are required for top-performing HF vertical antenna installations. Ground wire radials do not need to be any specific length because the earth detunes them. Fill your ground-mounted vertical space with radials that run out from the antenna feedpoint in all possible directions, as far as they can go, up to about one-quarter wavelength on the lowest frequency. Even radials that are all about one-eighth wavelength long on the lowest frequency band are just fine for multi-band verticals over reasonably conductive soils. Use longer radials on lossy soils with sand and rocks. In most cases, a greater number of short ground radials will provide greater efficiency and stronger signals than is achieved with a few long radials. DX Engineering Tinned Copper Radial Wire Kits are available in four sizes: Shorter spool kits, 500 ft. and 1,000 ft., are perfect for the single HF ground-mounted vertical. Longer spool kits, 2,500 ft. and 5,000 ft., are intended for 2-element Dual Vertical Arrays, 3-element ProStack Arrays, and 4-element Four Square Array Systems. Each kit has the appropriate number of biodegradable staples and tinned crimp ring terminals. Why is this wire the absolute best choice for any ground-mounted vertical antenna? Because, DX Engineering Tinned Copper Radial Wire will last much longer in a variety of soil conditions as compared to bare copper, copper coated steel or aluminum wires. Radials deployed with those other wire types actually corrode and degrade rather quickly. Unfortunately, they do so slowly enough that the operator does not easily perceive that degradation in terms of antenna system performance. With Tinned Copper wire, full radial system integrity is maintained for a greater number of years. Depending upon soil type, installations with DXE-TCRW16 will maintain vertical antenna performance for many, many years… and even decades. NOTE: To prevent accelerated corrosion and the possibility of noise, DO NOT use metal anchor pins (lawn staples) on Tinned Copper Radial Wire. These kits contain only the DXE-STPL-100BD Biodegradable Anchor Pins to hold down bare wire radials. Biodegradable staples allow easy installation of radial wires and will disperse in a couple years, after they are no longer needed, making them site friendly. Biodegradable staples work best in soft ground where they may be pushed or lightly tapped into the ground. Since they are a lacto-resin material they are subject to breaking in rocky or hard soil and are not intended to be hammered. DX Engineering Tinned Copper Radial Wire kits are the right choice for long lasting top-performance radial systems for your ground-mounted vertical antenna system.
( 2 )
$1,261.83
Times Microwave Systems® Bulk Coaxial Cables
Times Microwave Systems Bulk Coaxial Cables are recognized as superior RF cable products. The standard Times Microwave LMR® is a UV-resistant polyethylene jacketed cable designed for 20-year service in outdoor use. Depending upon size, LMR® cable has a solid copper or copper clad solid aluminum center conductor. Their bending and handling characteristics are significantly better than air-dielectric and corrugated hard line cables. LMR-DB® cable has a waterproofing compound to prevent moisture intrusion after a minor abrasion. Times Microwave Systems EZ Series and TC Series connectors are suitable for use on standard LMR® and LMR-DB® cables. Times Microwave Systems LMR® UltraFlex (UF) cables have a stranded bare copper center and a rubber jacket (black thermoplastic elastomer) designed for repeated bending. Times Microwave TC Series crimp connectors are designed for use on LMR® UltraFlex cables. LMR®'s RF shielding is typically 50 dB greater than standard coax. The copper shield and multi-ply bonded foil outer conductor is rated conservatively at greater than 90 dB. That's better than 180 dB isolation between two adjacent cables. A wide variety of connectors are available for LMR cables, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimped outer attachment using standard hex-crimp methods. Times Microwave Systems is a premier supplier of coaxial cable products worldwide. Only Times offers a range of products specifically developed to perform as needed in the most diverse range of environments. Times Microwave Systems has over 60 years of experience in building the highest-quality cables. Order LMR® coaxial cables from DX Engineering and put Times Microwave Systems Bulk Coaxial Cables to work for you! LMR® is a registered trademark of Times Microwave Systems.
( 106 )
$1,229.99