Availability
Parts and Accessories
Instant Rebate
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers provide continuous wide-range RX coverage from 30kHz through 174MHz, and from 400 through 470MHz including SWL, FM broadcast, and Air-band. TX band coverage includes HF 160 – 10M, with the addition of 6M, 2M, and 70cm. The Yaesu FTX-1 Field is perfect for portable field operation. This model features up to 10W of power output when used with an external 13.8VDC power supply. By attaching the SBR-52LI Li-ion to the rear of the Field Head, the FTX-1 provides 6W (5W for QRP) stand-alone operation on HF through V/UHF bands in all modes – SSB, CW, AM, FM and C4FM digital. 9-hour stand-alone operating time with 6W on HF bands (SSB), and 8-hour operating time with 6W on V/UHF bands (FM) are available (6-6-48 duty cycle). The FTX-1 Field Head can charge the included Li-ion battery automatically when connected to an External 13.8VDC power supply or use an optional third-party USB Type-C PD (Power Delivery) cable to recharge the battery (45W or greater/ 15V 2A).
( 12 )
$1,899.95
Palstar HF-Auto 1800 Watt Automatic Antenna Tuners
Palstar HF-AUTO 1800 Watt Automatic Antenna Tuners take it to the next level and offer auto-tuning with a power rating of 1,800 watts. Originally rated at 1500 watts, Palstar has increased the rating to reflect the true capability of their tuner. Like all Palstar products, the HF-AUTO automatic antenna tuner was designed by Hams for Hams, carrying on the Palstar tradition for high-quality products. Auto-tuners have been around for years, but most of them use clacking relays and lumped components so that the match is always just a little bit off. Palstar reinvented the auto-tuner with quiet, continuously variable components for a perfect match every time. They capped off this achievement with a unit that can tune with only 2 watts of power, but can handle up to 1,800 watts. Palstar stands behind HF-AUTO automatic antenna tuners with a one year limited warranty. Like most Hams, you've probably tried tuners made by the "other" guys. If you're ready for a switch to a high-quality, the Palstar HF-AUTO 1800 Watt Automatic Antenna Tuners represent the cutting-edge of Palstar technology.
( 48 )
$1,795.99
ACOM 06AT Automatic Antenna Tuners
The ACOM 06AT Automatic Antenna Tuners is an automatic antenna tuner for the HF Amateur Radio bands with the addition of 6 meters. The built-in, four-position antenna switch is designed to match the selected antenna impedance and works exclusively with ACOM solid-state amplifiers such as the ACOM 600S, 700S, 1200S and the 2020S. TAP on the title of the listed item for an overview - a complete description, Specifications, Required and Suggested Parts, as well as links to instruction manuals and charts.
( 7 )
$1,599.99
—
$1,763.99
Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters
Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters are digital / conventional FM dual mode repeaters with Dual Receive / Dual Transmit (DTDR) capabilities. Easy Migration… The repeater controller, receiver and transmitter are all packaged into a standard 19 in. rack mount unit for simple replacement of an existing repeater. Existing peripheral devices such as duplexer and amplifier, etc., can continue to be used as-is. DR-2X Features: * Modulation Modes: Conventional FM, 12.5 kHz C4FM Digital (V/D Mode, VFR Mode, DFR Mode) * VHF or UHF operation (cross-band capable) / DRDT * AMS (Automatic Mode Select) automatically recognizes C4FM digital or conventional FM, and the DR-2X re-transmits using the preset communications mode * 3.5 in. full-color touch panel operation * Extremely reliable, high RF output power: 50W/20W/10W * Emergency Operation: Supports auto-switched backup battery * Front panel microphone connector is provided for repeater testing, and as a base station * Built-in monitor speaker with volume control * Full compatibility with existing repeater controllers using the 15-pin I/O * MSRL (Multi-site repeater link) for easy coverage expansion using optional module * New and improved "News Station" feature for easy sharing of voice and text messaging * Enhanced Group Monitor feature for Easy Grouping Set-up (DG-ID, DP-ID) * NOTE: System Fusion is NOT compatible with D-STAR GMSK User-Friendly Setup: The large front panel, color touch screen permits convenient configuration of the transmitter and receiver frequencies, CTCSS tones, squelch, transmit power output and AMS functions. Simply turn the display switch ON and use the touch panel screen to confirm or change settings. Enhanced Group Monitor: Yaesu's Group Monitor feature allows you to track multiple resources quickly by displaying telemetry and signal strength information of other group members that share the same Digital Group Identification number. Optional MSRL (Multi-site Repeater Link): MSRL allows the repeater operator to link multiple repeaters over a Wide-Area-Network (WAN) or Local-Area-Network (LAN) across short or long distances. New and Improved News Station Function: Quickly store and retrieve digital audio and text messages for groups or individual operators that can be accessed on demand, any time of the day (* Requires Optional MSRL module). Other Features: * Internal AC Power Supply * High Stability plus/minus 2.5ppm TCXO included * DSQ (Digital Squelch Code) Signaling feature * CTCSS and DCS Signaling feature * ID Announcement feature * Remote/External Controller Interface * Base Station Operation * Firmware Upgradeable DR-2X Supplied Accessories: * AC Cable * DC Cable for backup battery * PC Connection cable SCU-20 * Rubber feet (4) DR-2X Options: * DTMF Microphone MH-48A6JA * Hand Microphone MH-42C6J * Voice Guide Unit FVS-2 DR-2X partial specifications: * 144 to 148 MHz, 430 to 450 MHz * Channel steps 5 / 6.25 kHz * Emission type F1D, F2D, F3E, F7W * Frequency stability plus/minus 2.5 ppm (-4F to +140F / -20C to +60C) * Antenna impedance 50 ohms * Supply Voltage AC 100 to 240 V * DC 11.7 to 15.8 V, negative ground * Weight: 22.05 lbs. (10 kg) approximately Transmitter: * RF power output 50/20/5 W * Modulation type F1D, F2D, F3E Variable Reactance Modulation * F7W 4FSK (C4FM) Receiver: * Double conversion Superheterodyne * Audio output 4 W (4 ohms, 10 percent THD, 13.8 V; internal speaker) Current consumption: * 1.5 A (Receive) * 13 A (50 W TX, 144 MHz band) * 14 A (50 W TX, 430 MHz band) Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Move your repeaters into the future! Install Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters from DX Engineering.
( 2 )
$1,799.95
Ciro Mazzoni Automatic Magnetic Loop Antennas
Ciro Mazzoni Automatic Magnetic Loop Antennas are ideal stealth HOA and small-space loop antennas. They provide exciting new capabilities to limited space operations with unparalleled reliability and dramatically higher power handling compared to other transmitting loops. These are considered to be the best small transmitting loops available in the world! They are constructed with tough, attractive, aircraft grade aluminum. In spite of their compact size, these antennas automatically adjust to resonance throughout a wide band range: the MIDI Loop tunes 80 through 20 meters, the BABY tunes 40 through 10 meters... without any coverage gap! Now, THE STEALTH LOOP adds even more versatility for the Amateur who is shackled by antenna restrictions. Use it on the ground or on a table! Click on the STEALTH below for More Details! For each LOOP Antenna, MIDI, BABY and THE STEALTH LOOP, frequency information is directly transferred from your radio (ICOM, Elecraft, Kenwood, and Yaesu) to the included ATU 2.0 Controller, by RS-232 or Interface Cable. The Loop Antenna tunes automatically to the radio frequency or manual tuning is available with the ATU 2.0 USB Keypad, also included. If you need a very-high quality antenna that is concealable and operates at respectable power over a wide frequency range, then Ciro Mazzoni Automatic Magnetic Loop Antennas are a great choice!
( 46 )
$1,999.99
FlexRadio Maestro Control Consoles
FlexRadio Maestro Control Consoles are an intuitive, plug-and-play control console that allows you to operate any FLEX-6000, FLEX-8000, or Aurora Series transceiver without a traditional PC. Simply connect Maestro directly or via your local area network (LAN) to begin operating. Frequently used controls are placed within easy reach and clearly labeled for efficient, low-motion operation. Less common functions are accessible through the large capacitive touch LCD, which supports intuitive pan, zoom, tune, and menu navigation—like modern smartphones and tablets. CW paddles can also be connected directly for seamless integration. With its compact, lightweight design and minimal wiring, Maestro offers flexible placement anywhere in your shack or home. Maestro ships with Fixed Feet, Power Supply and an Ethernet Cable.
Not Yet Reviewed
$1,599.00
DX Engineering 80 Meter Self Supporting Heavy Duty Vertical Antennas
DX Engineering 80 Meter Self Supporting Heavy Duty Vertical Antennas, model DXE-7580FS-VA-2, are high performance vertical antennas specifically designed for the 75/80 meter band. These DX Engineering 70.5 ft. vertical antennas allow you to achieve the strongest possible presence at your power level and be competitive. These are FULL SIZE, quarter-wave vertical antennas that deliver fantastic specs and the highest possible performance at a price that can easily be justified. Every design detail of the DXE-7580FS-VA-2 Heavy Duty Verticals provide for a very rugged 80 meter antenna that can stay up with no guying necessary and no worry. A 3 in. O.D. thick-wall 6061 aluminum tubing base and an extra-large insulating channel are combined with a patented* heavy duty stainless steel pivoting fixture that is second to none. Engineered for ease of assembly and adjustments, with corrosion-resistant aluminum tubing, stainless steel mounting brackets, and stainless steel hardware, these are very durable and attractive self-supporting antennas. If an extreme wind storm is predicted, one operator can easily lower and raise these antennas safely, due to the simplicity of the included Heavy Duty Pivoting Fixture and optional DXE-VRW-1 Manual Winch. DX Engineering 80 Meter Self Supporting Heavy Duty Vertical Antennas offer full band coverage, with a 2:1 SWR bandwidth of up to 557 kHz, depending on your radial field. Your internal tuner can get the SWR down to 1:1 on any DX frequency for maximum power transfer. DX Engineering 80 Meter Full Size Quarter Wave Heavy Duty Vertical Antennas feature: -- Self-supporting – will withstand steady-state winds in excess of 92 MPH without guying (guying required under extreme wind speed conditions) -- 5 kW SSB and CW rated—unparalleled reliability -- Ultra-rugged construction starts with 3 in. O.D. aircraft-grade heavy wall tubing -- Ultra-wide SWR bandwidth and unbeaten gain -- Highest wind ratings--high strength 6063/6061 tubing manufactured to DX Engineering specifications -- Easy tilt up and down-- Unique fold-over antenna mount features DX Engineering's patented stainless steel Pivoting Fixture, *U.S. Patent Number 8,130,168 -- High power handling and high strength, UV protected EXTREN® insulators -- No rust--100 percent stainless steel tubing clamps and hardware -- Reliability second to none--specially manufactured stainless and aluminum saddle clamps, stainless bolts, and precision machining on each antenna This antenna system requires the installation of a heavy duty mounting pipe set in concrete. Specifically, 3 in. OD high strength galvanized steel tubing with 0.250 in. minimum wall thickness and 7 ft. (84 in.) minimum length, which is available from DX Engineering; part number DXE-VGMT-3CG. A customer supplied 2-1/2 in. Schedule 80 pipe that has an outside diameter of 2.875 in. is also suitable. About 36 in. of the mounting pipe should extend above the concrete. Depth of the mounting hole and amount of concrete is dependent on local soil type, condition and antenna guying. Note: For additional information, please look at the files under the "Documentation" tab. Designed to the highest of standards, DX Engineering 80 Meter Self Supporting Heavy Duty Vertical Antennas are very affordable, and could very well be the finest 80 meter antenna you will ever own.
( 9 )
$1,534.98
Diex Antennas DXS Series Multiband Directional Antennas
Diex Antennas DXS Series Multi-band 3 Element Yagi Antennas delivers high-performance, Multi-band operation for the 40, 20, 15, 10 and 6-meter amateur bands. The DXS antenna series features three tunable aluminum elements, engineered for optimal directionality and gain. With a power handling capacity of up to 1,500 watts, these antennas are built to perform under demanding conditions. Crafted in Brazil using quality materials, the DXS Series is designed for long-lasting, trouble-free service. Easy to assemble and require only a modest mast or tower, these antennas offer an economical and effective solution for getting on the air.
Not Yet Reviewed
$1,632.99
—
$1,745.99
DX Engineering HF Portable Operation Gear Packages
You might have heard about portable ham radio operations and the POTA (Parks On The Air) and SOTA (Summits On The Air) programs, but perhaps you feel a bit overwhelmed when it comes to selecting gear. These HF Portable Operation Gear Packages are expertly curated solutions for amateur radio operators who demand reliable, high-performance gear in the field. Designed with Parks on the Air (POTA) activators in mind, each package includes essential components for efficient HF operation—whether you're setting up at a trailhead, mountaintop, or national park. Rugged, compact, and field-ready, these kits make portable ops easier than ever. Whether you're activating a park for POTA, summiting a peak for SOTA, or simply exploring portable ops, these rugged, compact kits are built to work seamlessly together and get you on the air quickly. No guesswork—just reliable gear, handpicked by DX Engineering to deliver exceptional performance wherever your ham radio adventures take you. Order a DX Engineering HF Portable Operation Gear Package from DX Engineering today!
( 1 )
$1,508.83
—
$1,808.83
DX Engineering Dream Station Combos
DX Engineering Dream Station Combos offer transceivers and accessories that create stations to cover just about any level of wish list. From the nice entry-level HF rig with headset and footswitch all the way up to the ultimate station with a top-flight transceiver, a high-power amplifier and a collection of incredible accessories, there are stations here that we would all like to own, and these station combos could easily satisfy almost any ham's boldest desires. To allow for station customization and simplicity, interconnecting coaxial and accessory cables are not included. Browse and choose the station that will make your Amateur Radio dreams come true. DX Engineering Dream Station Combos, in your shack, are the answer to your wishes! * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 1 )
$1,654.94
Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas
Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas are in Bushcomm's flagship antenna group (BBA Series) and are all-round best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional and commercial users. BBA-1KD 80 through 10 meter dipoles are significantly more compact than their 160 meter counterparts. Bushcomm BBA Series antennas have the flexibility to suit a wide range of installation situations - between two purpose built towers, in an inverted "V" configuration or even between a tower and the shed out back. All BBA Series antennas include a purpose-designed balun. BBA-1KD specifications: * Frequency Range 3.5 - 30MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2:1 * Gain (height dependent) 5dBi (typical) -4dBi at 3.5MHz (height dependent) * Power Rating 1,000 Watts continuous 1.5 kW PEP (voice) * 1kW digital ready * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Antenna Weight: approximately 11.0 lbs. * Antenna Length: 85.58 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * Wind rating 130mph (horizontal) * Ice loading 0.25 in., (with reduced wind rating) * Mast Spacing 95 ft. horizontal tower spacing; 65.6 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. The highest quality materials are used in construction of these antennas including stainless steel wire and fittings and UV resistant fiberglass rods. Quality materials and excellent design produces an antenna that will survive the rigors of the outdoors for many years. For a broadband 80-10 meter dipole, remember these Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas from DX Engineering.
( 1 )
$1,753.99
ACOM 20AT Automatic Antenna Tuner and Switch
The ACOM 20AT Automatic Antenna Tuner and Switch is a sophisticated automatic antenna tuner designed for HF plus 6-meters, featuring an integrated four-way antenna switch. This tuner is optimized for use with the ACOM 2020S solid-state amplifier, ensuring seamless operation and enhanced performance. With its ability to effortlessly select and match up to four antennas to 50-Ohm impedance, the ACOM 20AT is an excellent choice for those seeking a high-performance, automatic antenna tuner with advanced features.
Not Yet Reviewed
$1,799.99
InnovAntennas DXR Series Multi-Band HF Beams
InnovAntennas DXR Series Multi-Band HF Beams have short booms with full-size elements or capacity-loaded shortened elements, all with excellent performance, making them very popular internationally. The DXR Series interlaced-element antennas, optimized by G0KSC over a long period of time, achieve the best possible balance between compact size and performance. For the DXR Series Multi-band Yagis, equal attention was paid to a very solid construction and sufficiently small component and packaging size, to keep shipping costs within reasonable limits. Click on any model listed for specific details and specifications. InnovAntennas DXR Series Multi-Band HF Beams are available exclusively from DX Engineering in North America. Important features of InnovAntennas DXR Series Multi-Band HF Beams: * No traps, matching links, or hairpins * Only one feed line for all bands * Careful selection of materials without regard to cost * Very robust construction with still manageable package size The DXR Series beams use a 1.97 x 1.97 in. (50 x 50 mm) square boom with 0.078 in. (2 mm) wall thickness. A square boom has the advantage that the elements cannot twist in the plane. On the other hand, it is slightly heavier than a round boom of the same stiffness. The DXR Yagis do not require any bracing of the boom. The longest elements are 1.378 in. (35 mm) diameter in the middle and taper relatively quickly to achieve a good compromise between weight and strength. This construction also helps to avoid constant vibration even in light winds. With these multi-band Yagis, care has been taken to ensure that there are never more than the elements of three bands nested within each other. This is because each additional element for one band can cause interference on another band. This negative effect was avoided by careful manual optimization. The result is the best possible matching over a wider band range than other antenna designs. In most cases, no tuner is necessary; the SWR minimum can be precisely set by adjusting the element lengths. Due to the robust construction and the absence of moving or electrically active components such as coils, traps, hairpins, etc., an InnovAntennas DXR beam is maintenance-free for many years. The insulators are UV-resistant and designed for a wide temperature range. The mounting hardware uses sea-water resistant stainless steel and the aluminum is type T6 6066/6082, which is also used in aviation. It is nice not to have to climb the mast every year to maintain the antenna. The DXR Series Multiband beams are designed to require only one feed line. This makes installation on a mast with a rotor very easy. And the use of modern SDR transceivers, which allow the observation of several bands at the same time, becomes really useful. The one feed line is connected directly to the solid distribution rails of the fed elements. By avoiding baluns, matching elements, traps, or hairpins for tuning, transmit power is only limited by the coaxial cable and connectors. Note: Front-to-back ratio (F/B) and SWR bandwidth data for the DXR Series will be added as it becomes available. Many models of the DXR Series are available as a "super-compact" version, on which the longest elements have been shortened with capacity hats, thus reducing their turning radius considerably. The installation of these impressive antennas is possible even where space is limited.
( 3 )
$1,775.99
—
$1,899.99
DX Engineering 2 x 8 Remote Antenna Smart Two Radio Switch System
DX Engineering 2 x 8 Remote Antenna Smart Two Radio Switch System, model DXE-RRMX2X8, is a packaged combination of one DXE-RR2X8B Two-Radio, Eight Port Remote Switch, one DXE-MX2X8 Interface Unit and two DXE-CC-8A Control Consoles. Each control console (A and B) can select one of 7 or 8 positions available. When one console has one particular position selected, the other console is locked out of that position - first come, first served. Providing manual SO2R functionality for two-radio selection of eight antenna systems from 100 kHz through 54 MHz, the DXE-RRMX2X8 Smart System offers virtually no loss across HF and excellent low-loss performance on six meters (less than 0.16 dB of loss at 50 MHz). The RR2X8 dual star-pattern arrangement of 24 internal relays achieves vastly improved port-to-port isolation, very low SWR and excellent power handling over conventional remote coax switches, providing connection of eight SO-239 antenna output ports to either the A (master) or B (slave) SO-239 input ports. The DXE-RRMX2X8 system also uses removable screw terminal plugs for the control cables. The removable plugs greatly simplify installation by eliminating the need for soldering. Disassembly is not required for control wiring access. The DXE-RRMX2X8B also offers the following features: * RF Shielded Weatherproof Housings - unique protection * Excellent Port-to-Port Isolation; typically greater than 70 dB at 30 MHz * Ports not selected are grounded * High-RF tolerant UHF connectors * Enclosed 16 ampere RF relays * Safe 12 volt DC relay operation * MOVs for surge protection on control lines * RF bypass capacitors * Includes two DXE-SSVC-2P Stainless Steel V-Clamps for mounting * The DXE-MX2X8 interface unit interfaces between the DXE-RR2X8 and the two DXE-CC-8A control consoles for seamless operation Each of the two DXE-CC-8A Control Consoles require 12V DC nominal input, have LED port selection indicators and provide the BCD outputs to the DXE-MX2X8 interface unit. Specifications of the DXE-RRMX2X8 2 x 8 Remote Antenna Smart Two Radio Switch System: * Frequency Coverage: 100 kHz to 54 MHz * Power Rating: 6 kW ICAS all modes, 4 kW CCS all modes, under 2:1 SWR * Control Voltage: 10-14V DC at 100 mA per port * Port-to-Port Isolation: >70 dB below 30 MHz, >60 dB below 60 MHz * Ports Not Selected: Are Grounded * Loss: <0.3 dBm below at 52 MHz * Impedance: 50 ohms * Control Cable Requirement: Two ten conductor cables (DXE-CW9S) * Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 1 )
$1,534.96
Penta Labs RF Vacuum Tubes
Penta Laboratories was founded in 1951 and is a world-class manufacturer and distributor of a wide range of vacuum tubes for a variety of industries. Penta's commitment to excellence begins with design and follows each product all the way through distribution. Penta Labs matched vacuum tubes go through rigorous test procedures to enhance performance during their operation. Each Penta Labs vacuum tube is burned in for a minimum of 48 hours dissipating full power with filament, plate and screen voltages that are normally used in amplifier applications. All of this ensures that the various electrical parameters have stabilized and the matching of each vacuum tube will not drift during its lifetime. Penta Labs power tubes are matched within a 5% variation on all parameters. This is a process of eliminating tubes that test with bad values, rejecting those outside limits of design. Each passing vacuum tube is then tested on a fleet of WT-100A original RCA production testers for plate current, screen current and transconductance (gm). We also check for grid current and leakage between elements. When you receive single and matched vacuum tubes from Penta Labs, you can rest assured that you are receiving a product that has been thoroughly tested and will perform at levels unsurpassed in the industry. DX Engineering offers a selection of Penta Labs single and matched sets of RF vacuum tubes and ceramic vacuum tubes for your electronics project or repair. Order yours today!
( 76 )
$1,699.99
Diex Antennas Multi-Band Log Periodic Antenna
Diex Antennas Multi-Band Log Periodic Antennas deliver exceptional directionality and full coverage across the 20 through 10-meter amateur bands. Expertly engineered and crafted in Brazil using high-quality aluminum tubing and durable materials, these antennas are built to endure harsh environments while providing long-lasting, high-performance operation. With a power rating of up to 2000 Watts PEP or 700 Watts continuous duty, these antennas are ready for demanding applications. It offers 8.55dBi of gain, helping your signal reach farther—whether across the country or around the globe. Designed for efficiency, the Diex Log Periodic maintains a low SWR across its entire frequency range, minimizing the need for adjustments or an external antenna tuner.
Not Yet Reviewed
$1,699.99
OptiBeam HF Directional Antennas
OptiBeam antenna technology has achieved directional antennas with extraordinary electrical properties, including the highest efficiency, optimum band coverage, nearly constant gain and unchanging radiation pattern across the band, and low SWR. These antennas maintain consistent electrical characteristics under all weather-conditions and include a high power balun with UHF female connector for your 50 Ohm coaxial cable. OptiBeam Antennas are distinguished by their advanced mechanical qualities. Specially configured, stable and properly shaped element holders, robust square and round booms with effective and very solidly-built element transitions are OptiBeam exclusives. They provide advanced physical properties, including proper balance and the highest stability of the entire system. Elements are perfectly aligned and secured against torsion with minimal sag for a visually pleasing appearance. OptiBeam antennas are made for those who understand the true value of investing in proven electrical performance and unequalled mechanical quality for the ultimate in reliability. They are built to withstand the harshest conditions using the very best materials, including high quality aluminum alloys, UV stable synthetic parts and stainless steel hardware. OptiBeam antennas are designed to be easier to build than others, arriving in subassemblies with every part carefully sorted, clearly labeled, and extremely well packed for worry-free shipment and straightforward installation. In 2025, the OptiBeam brand of products was exclusively acquired by WiMo Antennen und Elektronik GmbH. The OptiBeam portfolio is now produced by WiMo and integrated into its product offering. With this acquisition, WiMo will integrate the technical expertise and know-how gained from OptiBeam's many years of experience in antenna technology and will provide new impetus with its extensive service and sales network. The primary goal is to successfully continue OptiBeam's antennas, ensure long-term customer service and spare parts availability, and leverage development potential. For enthusiastic operators of all pursuits, OptiBeam provides the advantage of pure performance. Proven in the field and confirmed by the most demanding hams around the world – choose OptiBeam for your station.
Not Yet Reviewed
$1,689.99
—
$1,869.99
Chelegance SV6301A VNA Handheld Vector Network Analyzers
Chelegance SV6301A VNA Handheld Vector Network Analyzers are complex and useful tools to have in the shack toolbox. They are not only well suited for testing and analyzing antennas, but they are also used to measure filters, amplifiers, attenuators, cables, power dividers, couplers, duplexers and other RF components. The versatile SV6301A features a wide frequency range of 1 MHz to 6.3 GHz and can perform measurements on a variety of antennas in the MF/HF/VHF/UHF and SHF bands as well as shortwave, ISM band, WiFi, Bluetooth and GPS antennas.
( 1 )
$1,675.80
DX Engineering 160 Meter THUNDERBOLT® Vertical Antennas
DX Engineering 160 Meter THUNDERBOLT® Vertical Antennas are high-performance antennas specifically designed for use on Top Band. You will achieve the strongest possible presence at your power level and be competitive with a 160 meter vertical monoband antenna that is only 55 feet tall! A custom-designed capacity hat system allows you to get on 160 meters with unparalleled performance. Wires and ropes have been accentuated in our product image for your viewing clarity. They are much less visible in an actual installation with minimal visual impact for such a large antenna. DX Engineering 160 Meter THUNDERBOLT® Vertical Antennas are tunable with an impressive 40 kHz bandwidth. This means that operation on the CW DX frequencies and DX Phone frequencies are within the range of most internal tuners - no physical changes to the antenna are necessary. DX Engineering DXE-160VA-1, made with sectional aluminum tubing, is a 55-foot high Monoband Vertical Antenna system with a massive 3-inch OD base section. Included with this antenna system is a rugged, patented* stainless steel pivot fixture for ease of raising, lowering and tuning adjustments. Engineered with 6061-T8 and 6063-T832 corrosion-resistant aluminum tubing, stainless steel mounting brackets and stainless steel hardware, this antenna is very durable and attractive. Why Does This Antenna Perform So Well for Its Height? The top capacity hat is large enough that the current along the radiator is almost constant. Typical shortened verticals for this band, with smaller top-hats, have currents that vary along the length and end up producing much less signal strength. This also works in the receive mode to let you hear weaker signals, although at this frequency range dedicated receiving antennas are almost a must. See DX Engineering's full line of Receive Antennas and Array Systems. DX Engineering 160 Meter THUNDERBOLT® Vertical Antennas feature: * High Efficiency Design * 5 kW SSB and CW rated * Unparalleled reliability * Custom designed capacity hat engineered for top performance * DX Engineering Adjustable Matching Network configures the lowest SWR * Broad 2:1 SWR bandwidth - 40 kHz - CW + DX Phone * Lowest possible take-off angle reduces domestic QRM signals * Easy tilt up and down-- Unique fold-over antenna mount features DX Engineering's patented pivoting fixture, *U.S. Patent Number 8,130,168 * High power handling and high strength, UV protected EXTREN® insulators * Ultra-rugged construction starts with 3 inch OD Aircraft Grade heavy wall tubing * Withstands steady-state winds in excess of 50 mph The optional DXE-VRW-1 Manual Winch for easy one-person raising and lowering of the antenna is available from DX Engineering. You can move the DXE-VRW-1 winch between similar antennas in a multi-antenna installation. This antenna system requires the installation of a heavy duty mounting pipe set in concrete. Specifically, 3 in. OD high strength galvanized steel tubing with 0.250 in. minimum wall thickness and 7 ft. (84 in.) minimum length, which is available from DX Engineering; part number DXE-VGMT-3CG. A customer supplied 2-1/2 in. Schedule 80 pipe that has an outside diameter of 2.875 in. is also suitable. About 36 in. of the mounting pipe should extend above the concrete. Depth of the mounting hole and amount of concrete is dependent on local soil type, condition and antenna guying. THUNDERBOLT® Vertical Antennas require a good ground radial system. We recommend a minimum of 32 radials, 65 ft. long, but more radials that are all longer will be more efficient for better signals. Note: For additional information, please look at the files under the "Documentation" tab. Do you want a great Top Band signal? If so, then try one of these DX Engineering 160 Meter THUNDERBOLT® Vertical Antennas!
( 2 )
$1,664.97
DX Engineering Skylark Dual-Band Yagi Antennas
DX Engineering Skylark™ Dual-Band Yagi Antennas cover 17 and 12 meters and have no moving parts, support instant band changes, have no UV challenges, and no antenna-related lightning issues! Skylark™ antennas require no tuning and offer an SWR of less than 1.3:1 over the entire width of both bands. DX Engineering's Skylark™ utilizes aluminum and stainless steel construction, operate from a single feed line, and have a 90 mph wind survival rating. At only 38 lbs., Skylark™ antennas are light enough to be easily installed. These antennas are supplied complete with all mounting hardware for a 2 in. mast. Their stainless steel U-bolts and unique boom to mast mounting system make for very easy installation. Check these DX Engineering Skylark™ features: * Gain on 17 meters: 7.95 dBi * Gain on 12 meters: 7.75 dBi * Front to back on 17 meters: 21 dB * Front to back on 12 meters: 24 dB * 16 ft. boom * Wind loading: 6.5 square feet * Longest element is 27 ft., 8 in. * Turning radius is 16 ft. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. These Skylark™ antennas are a perfect match for stacking with any classic tri-bander. Your tri-bander would support 20, 15, and 10 meters, while the Skylark™ adds 17 and 12 meters. They are also a perfect companion for DX Engineering Skyhawk™ Tri-Band Yagi Antennas. Whatever antenna your tower currently supports, one of these DX Engineering Skylark™ Dual-Band Yagis from DX Engineering will be a worthwhile addition to your antenna farm!
Not Yet Reviewed
$1,999.98
Metropwr FX775 SWR/Wattmeter with 3kW Coupler
Metropwr FX775 SWR/Wattmeter with 3kW Coupler are highly accurate digital meters that combine a touch screen auto-ranging wattmeter and RF coupler. They feature 1.8-55 MHz coverage and a large 7 inch color touchscreen display with convenient virtual touch buttons for easy selection of the various functions and operating modes. They feature a modern design with many options for expanding functionality, along with RF measurements from 0.5W to 3kW PEP with the included 3kW FX3 coupler. A fast 32-bit processor plus a coprocessor guarantees excellent performance capable of handling measurements in real time, including power (AVG, PEP, dBm), SWR, return loss, R, Z, X, and much more.
( 2 )
$1,968.99
DX Engineering Receive Four Square Array V3 Systems
DX Engineering Receive Four Square Array V3 Systems, DXE-R4S-SYS-V3, dramatically improve reception of weak distant MW and SW signals with excellent rejection of extraneous signals and noise. This is a four-direction switchable phased array that is able to cover multiple HF Amateur bands, such as 160, 80 and 40 meters, by using time delay phasing of four physically short active receive vertical elements. The resulting directional receiving pattern has deep back and side nulls that are superior to Beverage antennas and other receive arrays. The DX Engineering Receive Four Square Array is less susceptible to high angle signals than EWE, Flag, Pennant, K9AY and SAL antennas. Short vertical element receive arrays limit interfering signals and noise for dramatically superior weak signal reception, as compared to full size transmitting antennas and arrays. With the appropriate location and spacing of the four stealthy 8.5 ft. (2.6m) vertical elements, the Receive Four Square Array V3 System is a high performance, directional receive antenna for HF Amateur, SWL or AM DXing. Click or tap the title of a listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation. DX Engineering Receive Four Square Arrays offer directional performance comparable to four long Beverage wire antennas, while using far less land area. In the appropriate clear area, away from metal, structures and other antennas, each of the four Actives simply mount inches above the earth onto a ground rod. Each element is installed on the corners of the array square with sides that are one-eighth to one-quarter wavelength on the lowest band. For example, the optimized Receive Four Square Array for 160, 80 and 40 meters has elements spaced 70 ft. apart. The DXE-R4S-SYS-V3 system includes the DXE-RFS-3 Receive Four Square Array Controller, four Receive Short Element Active Vertical Antennas, DXE-RSEAV-1, featuring the new DXE-AVA-3 Active Matching Units, insulating mounting plates and stainless hardware. These Active Antennas are packed in a 38 x 5 x 5 in. carton for lower shipping cost. Three sections of 3 ft. aluminum tubing, 0.500, 0.375 and 0.250 inch OD, assemble to a height of only 8.5 ft., so each self-supporting element is truly stealthy. This complete array system also includes the DXE-EC-4 Directional Control Console, one 1,000 ft. roll of quality RG6U cable, all cable prep tools, connectors and hardware for construction of the array. Required ground rods and control cable are purchased separately. Build an exceptionally effective, electronically rotatable, stationary receive antenna that lets you hear the DX signals that cannot be heard on a transmit antenna. Dig the weak signals out of the noise with an antenna that can help make your station one of the best. Order and install the DX Engineering Receive Four Square Array V3 System.
Not Yet Reviewed
$1,903.39
EAntenna HF Rotatable Antennas
EAntenna HF Rotatable Antennas include a comprehensive range of mono-band and multi-band Yagi beams and rotatable Delta Loops and Dipoles. Find the band coverage and performance antenna of your dreams right here. For example, the exciting EAntenna 59+ provides great performance on 20, 17, 15, 12 and 10 meters! Check out the specs on this great line of HF directional antennas. DX Engineering offers EAntenna because their attention to manufacturing detail is excellent! Their Yagi, log periodic, and rotatable dipole antennas are built with high-quality stainless steel hardware and aircraft-grade aluminum. As you look through these selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce every one of the EAntenna premier HF beam antennas and state-of-the-art VHF and UHF Yagi antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 mph wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus, we can ship these great antennas internationally! When you're making plans for a new antenna at your station, look no further for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version.
( 44 )
$1,729.99
—
$1,859.99
Instant Rebate
Kenwood TS-590SG HF/6 Meter Base Transceivers
Kenwood TS-590SG HF/6 Meter Base Transceivers mark a bold new chapter in Kenwood's proud history of manufacturing high-performance transceivers. Their new "SG" model has added many upgrades to their TS-590S. Featuring narrow-band Roofing Filters the TS-590SG significantly reduces interference from unwanted signals that would hide DX in lesser rigs. With IF AGC that's based on advanced DSP technology, Kenwood has essentially redefined HF performance. The upgrades from TS-590S to TS-590SG make them practically new radios! Built to satisfy the most demanding DXer, these high-performance HF transceivers take Amateur Radio to the next level; continuing the Kenwood tradition of operating ease and rugged reliability. General features: * Best dynamic range in its class versus off-frequency interference * 500 Hz/2.7 kHz Roofing Filters * Advanced AGC control through digital signal processing from the IF stage onward * Proven split setting functionality included from the TS-990S * 32-bit floating point DSP * Programmable functions may be assigned to PF1, PF2 and the MULTI/CH knob's Push SW * Built-in automatic antenna tuner (160 to 6 meters) * Kenwood ARCP-590 Control Software * Kenwood ARHP-590 Radio Host Program for VOIP * TS-590SG is Kenwood Sky Command® II ready * CW Auto Tune * Beat Cancel * USB & Serial DB-9 ports for PC connectivity * Frequency Range TX: 160, 80, 60, 40, 30, 20, 17, 15, 12, 10 and 6 meter bands * Frequency Range RX: 0.13 to 30 MHz, 50 to 54 MHz, VFO: Continuous 30 kHz to 60 MHz * Modes: J3E (SSB), A1A (CW), A3E (AM), F3E (FM), F1B (FSK) * Frequency Stability: Plus/minus 5ppm 14 degrees F to 122 F, (plus/minus 0.5ppm with SO-3) * Antenna Impedance: 50 ohms, unbalanced * Internal Antenna Tuner Range: 16.7 to 150 ohms * TX Current Drain: 20.5A or less * RX (No signal) Current Drain: 1.5A or less * Operating Temperature: 14 degrees F to 122 F * Dimensions (W x H x D): 10.63 x 3.78 x 11.46 in. * Weight (Net): 16.31 lbs. Transmitter details: * Output Power: Max 100 W, Min 5 W, AM: Max 25 W / Min 5 W * Modulation: SSB Balanced modulation, FM Reactance modulation, AM Low-power modulation * Maximum Frequency Deviation (FM): Less than plus/minus 5 kHz (Wide) Less than plus/minus 2.5 kHz (Narrow) * Spurious Response: HF: Less than -50dB, 50MHz: Less than -60dB * Carrier Suppression: More than 50dB * Unwanted Sideband Suppression: More than 50dB * Transmit Audio Response: 400Hz to 2,600Hz, -6dB * XIT Variable Range: Plus/minus 9.999 kHz Receiver details: * Receiver circuit: Double or Triple Superheterodyne * IF frequencies: Double, 11.374 MHz, 24kHz; Triple, 73.095 MHz, 10.695 MHz, 24 kHz (except FM) /455 kHz (FM) * Sensitivity: SSB/CW/FSK (10dB S/N) Less than 0.2uV (1.705 - 24.5 MHz), Less than 0.13uV (24.5 - 30 MHz) * Sensitivity: AM (S/N 10dB) Less than 2uV (1.705 - 24.5 MHz), Less than 1.3uV (24.5 - 30 MHz) * Sensitivity: FM (12dB SINAD) Less than 0.22uV (28 - 30 MHz), Less than 0.22uV (50 - 54 MHz) * Image Rejection Ratio: More than 70 dB * IF Rejection Ratio: More than 70 dB * Selectivity: SSB More than 2.2 kHz (-6dB), Less than 4.4 kHz (-60dB) * Selectivity: CW/FSK More than 500 Hz (-6dB), Less than 1.2 kHz (-60dB) * Selectivity: AM More than 6 kHz (-6dB), Less than 12 kHz (-50dB) * Selectivity: FM More than 12 kHz (-6dB), Less than 25 kHz (-50dB) * RIT Variable Range: Plus/minus 9.999 kHz * Notch Filter Attenuation: Auto; More than 60dB, Manual; More than 70dB * Beat Cancel Attenuation: More than 40dB * Audio Output Power: More than 1.5W into 8 ohms Note: For additional information, please look at the files under the "Documentation" tab. Kenwood offers some of the most advanced Amateur Radios available. Their Kenwood TS-590SG HF/6 Meter Base Transceivers, available from DX Engineering, offer advanced features with easy, intuitive operation.
( 47 )
$1,779.95