Availability
10 Results Found For "75 ohm coax"
DX Engineering 75 ohm Coaxial Lightning Surge Protectors
DX Engineering 75 ohm Coaxial Lightning Surge Protectors feature a unique design that is impedance-matched to 75 ohms and are virtually transparent to all analog or digital bi-directional signals from DC to 1.0 GHz. Manufactured by Tii Network Technologies for DX Engineering, their patented proprietary coaxial gas tube surge protectors are equipped with an integral failshort mechanism for a power-cross condition, which shunts both the coaxial cables' center conductor and sheath for a common path to ground. The dc breakdown voltage of the protector provides superior protection against transient surges, and yet is compatible with network-powered applications. They may also be used in 75-ohm receive systems up to 1.0 GHz. The protection element is designed to reset after each over-voltage event and the metallic housing of the coaxial lightning surge protectors provides necessary EMI shielding. When properly connected, DX Engineering Coaxial Lightning Surge Protectors are environmentally sealed (15 psi) to prevent the ingress of moisture and humidity encountered in broadband pedestals, vaults and stand-alone receive antenna applications. Full 360 degree Type F connectors provide superior RF performance and tighter connections.
( 9 )
$39.99
DX Engineering RG-6/U 75-ohm Quad-Shield Coax Cable Assemblies
Our new DX Engineering RG-6/U 75-ohm Quad-Shield Coaxial Cable Assemblies are constructed from our own premium DX Engineering brand RG-6/U 75 ohm cable and superior quality weather-sealed nickel-plated compression F connectors. Their best-in-class design reduces loss and provides greater protection against electromagnetic interference. Available in specific lengths between 3 ft. and 200 ft., these pre-assembled cables with F connectors are your most convenient ultra-high quality RG-6/U cable solution. These RG-6/U cable assemblies are ideal for many applications such as active or passive HF Amateur Radio receive antenna systems, magnetic loop antennas, Beverage antennas, over the air TV reception, FM broadcast reception, CATV systems, raw video distribution and satellite radio installations like Sirius/XM. In fact, their low-loss characteristics are excellent up to the microwave frequencies that Satellite Radio systems employ! Our RG-6/U cable assemblies have gas-injected polyethylene foam dielectric for flexibility and moisture resistance. Their 18 AWG center conductor is copper-clad steel and is durable in the extreme. They have two foil shields plus two high-density aluminum braids for ultimate four-layer RF shielding. Their UV protected black exterior jacket is tough PVC (polyvinyl chloride). DX Engineering RG-6/U cable impedance is 75 ohms with an 83 percent velocity factor and have a minimum bend radius of 2.50 in. This is absolutely the best RG-6/U cable available and it's RoHS compliant! Look at these attenuation figures per 100 ft.: 5 MHz: 0.6 dB 30 MHz: 1.1 dB 55 MHz: 1.6 dB Are you installing or upgrading any receiving antenna or video distribution system that uses RG-6/U cable? If so, then these exceptional DX Engineering RG-6/U 75-ohm Quad-Shield Coaxial Cable Assemblies will make your installation easier and your results so much better!
( 13 )
$28.99
—
$49.99
Clearance
DX Engineering F6 75-ohm Coaxial Cable Assemblies
DX Engineering F6 75-ohm Coaxial Cable Assemblies are intended to be used for HF receive antenna systems as well as for cable or satellite TV system use. They are made with a high-quality, 75-ohm, direct-bury, "flooded" F6-type coax and watertight Snap-N-Seal F connectors. Flooded-style feedline, infused with a waterproof compound, have the distinct advantage of automatically sealing small accidental cuts or lacerations in the cable jacket. Plus, the flooding compound works perfectly with the Snap-N-Seal connector's O-rings to provide a reliable, environmentally sealed connection that prevents shield contamination, with no external waterproofing requirement. These low-loss cable assemblies feature a waterproof polyethylene jacket, dual shields, and connectors that are installed with a unique 360 degree radial compression system. A superior RF integrity of over -95 dB external signal rejection means that DX Engineering F6 75-ohm Coaxial Cable Assemblies are your best choice for any high performance system installation.
Not Yet Reviewed
$28.99
—
$29.99
$20.29
—
$20.99
DX Engineering EX6XL Type-F Universal Compression Connectors
DX Engineering EX6XL Type-F Universal Compression Connectors work on all RG6U coaxial cables, solving the problems of trying to identify cable type and figuring out which compression connector to use. This connector's unique design fits any RG6 and RG6U coaxial cables, standard or self-healing (flooded). They install onto RG6U 60% braid, dual shield, such as RG-6U and F-6, including legacy DXE-F6 and DXE-6UF, as well as all Quad Shield RG-6U including DXE-RG6UFQ and DXE-RG6UQ. These F connectors have a long, rugged metal body, heavy duty black plastic and are direct replacements for all previous blue and purple F connectors. They are easily installed with common F-connector installation compression tools including DXE-SNS-CT1. Features of the DX Engineering EX6XL Type-F Universal Compression Connectors: - O-ring is a redundant seal and is always compression sealing, regardless of torque - Large tapered compression area creates a redundant moisture-tight interface - Three circumferential gaskets seal the body to the post - Gas-tight seal connection between the nut and the post Specifications: Bandwidth: 0 to 3 GHz Impedance: 75 ohm (nominal) Return Loss: Minimum -30 dB to 3 GHz Insertion Loss: Less than .10 dB to 3 GHz Operating Voltage: 90 V (at 60 Hz continuous AC) Operating Temperature:-40 F to + 140 F (-40 C to 60 C) Cable Retention: 45 lbs. (20.41 kg) minimum Meets or exceeds all SCTE Specifications
( 6 )
$27.99
United Microsystems BT-75/BOG Beverage-On-Ground Antenna Transformers
The United Microsystems BT-75/BOG Beverage-on-Ground (BOG) Antenna Transformers are specifically designed for Beverage-on-Ground receive antennas and is based on the proven BT-75 transformer used with elevated Beverage antennas. Because BOG antennas are installed directly on or just above the ground, they require no supports and can be significantly shorter than traditional Beverage antennas, making them a practical option where space is limited. BOG antennas typically exhibit lower impedance than elevated Beverage antennas. The BT-75/BOG is optimized to provide proper impedance matching between the antenna and 75-ohm RG-6 coaxial cable, improving performance compared to standard Beverage transformers. For correct operation, the far end of the antenna must be terminated with a 250 to 300-ohm resistive load. The United Microsystems RXT-270 termination resistor is recommended. Properly installed Beverage antennas are low-noise, receive-only antennas that provide excellent rejection of signals and noise from the undesired direction. Due to the lower velocity factor of radio waves near the ground, a BOG antenna can often deliver a radiation pattern similar to an elevated Beverage antenna of roughly twice the length, though with reduced signal strength. A BOG antenna as short as 150 to 200 feet can provide effective receive performance, although a preamplifier may be beneficial in some installations. The BT-75/BOG is designed for use with 75-ohm RG-6 coaxial cable. Originally developed for television applications, RG-6 offers low loss at VHF and UHF frequencies, resulting in extremely low loss on the 160, 80, and 40-meter bands. Its availability and low cost make it a popular choice for low-band receive antenna feed lines. The transformer is housed in a NEMA-rated enclosure with stainless steel hardware for long-term outdoor durability. A built-in gas discharge tube across the antenna terminals helps protect the transformer from nearby lightning-induced surges, although it will not provide protection against direct or very close lightning strikes.
Not Yet Reviewed
$37.95
Hi-Z® Antennas DL-4 V2 Long and Short Delay Cables
Hi-Z® Antennas DL-4 V2 Long and Short Delay Cables are essential components for the Hi-Z 4 Element V2 4 Square and Hi-Z 8 Element V2 Multi-Band 8 Circle Receive Array Systems. These are the high quality RG-6U coaxial cables that are precision tuned by DX Engineering and terminated with compression-style weather resistant male F connectors. These Hi-Z DL4 V2 Delay Cables must be selected and purchased separately, depending upon the desired array band coverage and corresponding size of the array, detailed below. Each are permanently connected to the 4 Square or 8 Circle Phase Controller "Long Delay" and "Short Delay" female F connectors upon array installation. SMALL ARRAY dimensions for maximized multi-band reception require the selection of one HIZ-DL-4-60-85L (Long) and one HIZ-DL-4-60-85S (Short), as recommended by Hi-Z for: * 4 Square Array with element side spacing of 60 ft. * 8 Circle Array with a diameter of 85 ft. Overall excellent cardioid patterns are achieved for enhanced, low noise reception on all three low band bands--160, 80, and 40 meters with very good receiving results on 30 meters as well. LARGE ARRAYS that are dedicated for ONLY 160 and 80 meters, one HIZ-DL-4-80-113L and one HIZ-DL-4-80-113S are for: * 4 Square Array with element side spacing of 80 ft. * 8 Circle Array with a diameter of 113 ft. Large array spacing and longer delay cable allows the user to manipulate the achieved patterns and the resulting Receive Directivity Factor (RDF) for their desired band coverage optimization. This also requires the change of four jumpers inside the respective phase controller. See the array phase controller instructions for details on jumper settings for alternative delay lines, patterns and performance.
Not Yet Reviewed
$33.99
—
$48.99
DX Engineering Termination Loads
DX Engineering Termination Loads are for use on receive devices, splitters and feedlines for operational and testing purposes. Two types are available in 5 packs: - 75 ohm Type-F connector - 50 ohm BNC connector
Not Yet Reviewed
$22.99
Unified Microsystems Beverage Antenna Transformers
Unified Microsystems Beverage Antenna Transformers are now available. UMS transformers are built with stainless steel hardware and an F-Type coaxial connector. These transformers are fully enclosed for ultimate protection from the elements. They are corrosion resistant and sealed for many years of trouble-free use. Unified Microsystems Beverage transformers should be used with 75 ohm cable, typically RG-6, 6UF, F-6, or equivalent. H. H. Beverage described his "Wave Antenna" (the first Beverage) in the November, 1922 QST Magazine. Beverages are classic designs with well-defined characteristics and time-proven performance. Beverage antennas are among the simplest of high signal-to-noise-ratio antennas to construct. Make Unified Microsystems Beverage Antenna Transformers part of your receive-antenna system. Get yours from DX Engineering today!
( 10 )
$37.95
Chelegance RF Demo Kit for VNA
Chelegance RF Demo Kit for VNA is a PCB test board and learning tool for use with a Vector Network Analyzer, such as the Chelegance NanoVNA-F. This helpful demo kit includes two 6.8 in. RG178 coaxial cables with IPX to SMA male connectors to connect to one of the sample circuits on the 3.9 x 3.9 in. test board to your VNA. It features the following 18 RF circuits to demonstrate how each appears on the display when using a vector network analyzer: 1. RLC circuit 2. RLC circuit 3. 33 ohm resistance, SWR=1.5 4. 75 ohm resistance, SWR=1.5 5. Band-Stop Notch Filter, Ceramic, Center Freq. = 6.5MHz 6. Band-Pass Filter, Ceramic, Center Freq. = 10.7MHz 7. RC series circuit 8. LC series circuit 9. Single capacitance 10. Single inductance 11. Homemade low-pass filter, 3dB bandwidth 400MHz 12. Homemade high-pass filter, 3dB bandwidth 500MHz 13. Short Circuit 14. Open Circuit 15. 50 ohm Circuit 16. Through Circuit 17. 10dB attenuation circuit 18. 3dB attenuation circuit
Not Yet Reviewed
$28.99
DX Engineering F6 Cable Tool Cases
DX Engineering F6 Cable Prep Tool Cases keep your 75-ohm F-6 coaxial cable prep tools in one secure case. These rugged, lockable cases are lined with a precut foam insert to provide a home for each tool. Keep your tools together, protected, and out of sight with DX Engineering F6 Cable Prep Tool Cases.
Not Yet Reviewed
$31.99