Availability
11 Results Found For "Receive Array"
Hi-Z® Antennas DL-4 V2 Long and Short Delay Cables
Hi-Z® Antennas DL-4 V2 Long and Short Delay Cables are essential components for the Hi-Z 4 Element V2 4 Square and Hi-Z 8 Element V2 Multi-Band 8 Circle Receive Array Systems. These are the high quality RG-6U coaxial cables that are precision tuned by DX Engineering and terminated with compression-style weather resistant male F connectors. These Hi-Z DL4 V2 Delay Cables must be selected and purchased separately, depending upon the desired array band coverage and corresponding size of the array, detailed below. Each are permanently connected to the 4 Square or 8 Circle Phase Controller "Long Delay" and "Short Delay" female F connectors upon array installation. SMALL ARRAY dimensions for maximized multi-band reception require the selection of one HIZ-DL-4-60-85L (Long) and one HIZ-DL-4-60-85S (Short), as recommended by Hi-Z for: * 4 Square Array with element side spacing of 60 ft. * 8 Circle Array with a diameter of 85 ft. Overall excellent cardioid patterns are achieved for enhanced, low noise reception on all three low band bands--160, 80, and 40 meters with very good receiving results on 30 meters as well. LARGE ARRAYS that are dedicated for ONLY 160 and 80 meters, one HIZ-DL-4-80-113L and one HIZ-DL-4-80-113S are for: * 4 Square Array with element side spacing of 80 ft. * 8 Circle Array with a diameter of 113 ft. Large array spacing and longer delay cable allows the user to manipulate the achieved patterns and the resulting Receive Directivity Factor (RDF) for their desired band coverage optimization. This also requires the change of four jumpers inside the respective phase controller. See the array phase controller instructions for details on jumper settings for alternative delay lines, patterns and performance.
Not Yet Reviewed
$33.99
—
$48.99
Hi-Z® Antennas DL-3A Delay Cables
Hi-Z® Antennas DL-3A Delay Cables are an essential component of the Hi-Z Three Element V2 Triangular Array, required for installation of the a HIZ-PC-3A Phasing Combiner. Order one HIZ-DL-3AL Long Delay Cable for 40 ft. element spacing of the Hi-Z Three Element V2 Triangular Array. For arrays larger than 40 ft. element spacing, add one HIZ-DL-3AS Delay Cable Set, which includes three 3 ft. extension cables to provide adjustment capability for array size. Use all three for an array with 50 ft. element spacing. The 23 ft. DL-3AL is combined in-line with a single or multiple 3 ft. extensions from the DL-3AS. They connect in series to the PC-3A V2 Phasing Controller Delay Line ports. Signal delay with added cable segments allows the user to accommodate different size arrays, 40 through 50 ft. element spacing, or to manipulate the patterns to achieve changes in Receive Directivity Factor (RDF). See the Hi-Z Three Element V2 Triangular Array Phasing Combiner listing for additional information.
Not Yet Reviewed
$29.99
—
$35.99
YCCC Receive Feedline Choke Kits
Closeout- Other YCCC array components are no longer available YCCC Receive Feedline Choke Kits prevent common-mode noise or unwanted signal intrusion on the feed lines of YCCC Receive Vertical Array Kits. These choke kits are the same as provided in the array kit packages and may be used as replacements or in other applications. Component-level assembly of these kits is required. A choke enclosure is user supplied. Their function is to provide isolation between the input and output coaxial shield connections, while passing desired receive or control signals. Their isolation impedance blocks common-mode noise or unwanted signals. YCCC Receive Feedline Choke Kits are supplied with standard "F" female connectors to prevent connection to transmitting equipment. All inquiries and technical support for the discontinued YCCC kits and kit packages is handled by e-mail only, typically within two to three business days: yccctechsupport@verizon.net
Not Yet Reviewed
$22.00
ARRL Receiving Antennas for the Radio Amateur
"Transmitting and receiving antennas have different jobs to do." Although the fundamental characteristics of antennas apply to both transmission and reception, the requirements and priorities of receiving antennas can be vastly different from those of transmitting antennas. "Receiving Antennas for the Radio Amateur" focuses entirely on active and passive receiving antennas and their associated circuits. There are relatively few cases where a radio amateur cannot benefit from a separate, well-designed receiving antenna or antenna system. On the low bands, including our new allocations at 630 and 2,200 meters, heavy emphasis on the receiving end of these radio paths is essential for success. The active antenna holds a prominent position in this book, as it offers good receiving performance while taking up minimal space. Recent developments in radio frequency (RF) semiconductors, especially low-noise RF operational amplifiers, have made a number of previously difficult-to-implement active antenna designs a very simple task. Table of Contents: * Receiving Antennas are Different! * Your Friend, the Decibel * The Preamplifier Problem * The Amazing Disappearing Antenna * The Receiving Antenna as a Signal Generator * The Quest for Infinite Power Gain * The Role of the Resistor in the Receiving Antenna * The Small Loop Antenna * Achieving the Perfect Null * You Can Make Accurate Field Strength Measurements * The Aperiodic Loop * The Q Factor * The Beverage: In a Class of Its Own * Dealing with Non-Reciprocal Propagation * The Evolution of the eXOgon Antenna * The Lowdown on LF * The Random Wire * Arrays and Beamforming Networks * Powering Your Active Antenna * Diversity Methods * NVIS Receiving Antennas * Receiving Antenna Projects and Accessories * Materials and Construction Techniques * Our Two New Bands
Not Yet Reviewed
$27.95
Yaesu SSM-BT20 Bluetooth Mini Headsets
Yaesu SSM-BT20 Bluetooth Mini Headsets represent an ideal choice for those in pursuit of untethered communication. They boast a streamlined design, suitable for handheld radios and mobile phones and offer seamless, interference-free communication. This state-of-the-art Bluetooth headset is compatible with an extensive array of devices, including the Yaesu FT-3DE, Yaesu FT-3DR, Yaesu FTM-300DE, Yaesu FTM-300DR, Yaesu FTM-6000E, Yaesu FTM-6000R, among others. The SSM-BT20 model is equipped with a high-grade microphone, integrated with a multi-functional PTT button that can also be utilized to answer mobile phone calls. It features two volume buttons, a status LED, and two interchangeable earphone inserts with detachable open ear hooks, ensuring maximum comfort. The headset is specifically engineered for environments with low to normal noise levels. The Bluetooth headset is capable of transmitting audio up to approximately 32 ft. (10 meters) with excellent quality. This implies that the radio or mobile phone does not necessarily need to be always carried on the person. However, it is recommended to test the range in the specific environment of use to guarantee signal quality. The SSM-BT20 Bluetooth headset is supplied with a USB charging cable, enabling charging via any USB port. Whether it's a USB power adapter, USB cigarette lighter adapter, computer, notebook, or power bank, the headset can be charged with ease and convenience. Additional Features and Specifications: -Bluetooth version Ver 4.1 (profiles HSP, HFP), max. 32.81 ft. (10m) range (class 2) -Built-in lithium polymer battery -Intelligent Noise Reduction -Standby time with one battery charge: up to 400 hours -Talk time on one battery charge: up to 12 hours (continuous talk) -Dimensions: 2.362 x 0.866 x 0.591 in. (60 x 22 x 15mm) -Operating temperature: -4° F to 140° F (-20 to +60 degrees Celsius) -Charging temperature: 32° F to 113° F (0 to +45 degrees Celsius)
( 5 )
$49.99
DX Engineering Transceiver Amplifier Keying Cables
DX Engineering Transceiver Amplifier Keying Cables connect the "ground on transmit" or contact closure provided by the radio that is required to make an HF amplifier switch from "receive mode" to "transmit and amplify mode" when using PTT (push-to-talk), VOX or break-in CW keying. DX Engineering Transceiver Amplifier Keying Cables are made for specific transceiver models that have special DIN or mini-DIN connector accessory ports which provide the transceiver's only connections for linear amplifier keying. One type of amplifier keying cable has one RCA phono plug for the amplifier relay jack, which is all that is needed. When the transceiver PTT (push-to-talk) is keyed, the RCA plug center pin is connected to the shield (and chassis ground in most cases) to key the amp relay or its solid state keying circuit. Instead of a direct connection to the amp relay, the RCA plug may be connected to the keying input of an accessory device (DXE-KEYLINE-3, DXE-RTR-2 or DXE-NCC-2), amplifier keying interface (DXE-SV-KR or legacy Ameritron ARB-704 or KD9SV Products SV-KR) or other amp keying line interrupt device, such as a meter or an array controller. Each has a keying input and a keying output for the amplifier relay or another accessory. Another type of amplifier keying cable has two RCA phono plugs, one RED plug for the amplifier relay jack and one WHITE plug for ALC (Automatic Level Control) voltage from the amplifier. The legacy ALC connection does not need to be used with present era solid state transceivers and most modern amplifiers. ALC was required for use on transmitters with tube finals. Some modern amplifiers do not have an ALC output connector. If the amplifier does not have ALC it is okay to leave the WHITE plug disconnected. Order your DX Engineering Transceiver Amplifier Keying Cables to connect to your transceiver accessory port for keying amplifiers, sequencers, receive-transmit interfaces, buffer relays, and other accessories. NOTE: To enable the function of this keying cable, some late model Kenwood transceivers require menu activation of the amplifier keying circuit.
( 51 )
$36.99
—
$41.99
Radio Today Guide to the Yaesu FTDX10
"The Radio Today Guide to the Yaesu FTDX10" provides a practical and easy-to-understand guide to these great radios. The Yaesu FTDX10 is much more than just a cutdown version of the Yaesu FTDX101, as some might think. Andrew Barron, ZL3DW, again brings you the practical guide to getting the most out these highly rated transceivers. In common with all the other books in the Radio Today series, this 208-page paperback is not simply a rehash of the Yaesu User Manual, nor does it try to replace it. For example, the author explains not just what the control does, but also how and when to use it. Employing the same cutting-edge Hybrid SDR (Software Defined Radio) receiver architecture as the FTDX101, the author explains how to get the most from the FTDX10. You're also offered tips on how the author set up his FTDX10 and his real-world experiences. You'll find information on a huge array of functionality, physical features, connections, interfaces, and more alongside the incredibly useful troubleshooting guide. From the full-color 5 in. touch screen display to the rear panel connectors, the answers are provided. If you own a Yaesu FTDX10, or are just interested in how they work before buying one, the Radio Today Guide to the Yaesu FTDX10 provides a highly illuminating book. No owner or potential buyer should be without a copy. These are great radios and Andrew, ZL3DW, provides the insight into its features and how achieve their full potential.
( 2 )
$25.99
Radio Today Guide to the Yaesu FTdx101
The Yaesu FTdx101D and FTdx101MP transceivers are superb and highly rated radios, but if you own one or are considering buying one, are you aware of all the useful features and how achieve the full potential they offer? This is where the "Radio Today Guide to the Yaesu FTdx101" comes in. In common with all the other books in this Radio Today series, the 208-page paperback provides a practical and easy-to-understand guide to these great radios. Covering both the Yaesu FTdx101D and FTdx101MP transceivers, this book does not simply duplicate the manuals that describe each button, function, and control, but is a 'how to do it' book. From the front panel that's dominated by the full-color 7 in. touch screen display … to the VFO tuning knob, the book describes the use of the 'proper' buttons and knobs, alongside setting the myriad of touch screen controls. The function screen alone displays a bewildering array of 29 options, including several 'Soft Keys' that access deeper menu layers. This guide describes what's needed from these options to get you operating the radios at their best. Yaesu FTdx101 is described as a contest-grade transceiver identical to cutting edge Hybrid SDR receivers to ensure top-of-the-range IMD (intermodulation distortion) performance. The practical use of these is described, as is much of the book, in a step-by-step style. This book certainly does not stop here, with over 20 sections on setting up, different modes, troubleshooting, and even a Quick Reference Guide. The Radio Today Guide to the Yaesu FTdx101 provides an easily understood insight into the setup and operation of these great radios that every owner or potential buyer will find invaluable.
( 4 )
$25.99
Novel Antennas
Radio amateurs, to one extent or another, all experiment with antennas to get the best performance they can. But few have ever considered anything beyond the basic antenna designs. "Novel Antennas" tries to set that right with a myriad of 'novel' designs from around the world. What is a novel antenna anyway? This book does not include designs for standard Yagis, quads, quarter-wave verticals, horizontal loops, delta loops, magnetic loops, off-center-fed dipoles, or any of the more standard antenna designs that are found elsewhere. Although you won't find a standard dipole in this book, you will find the choke dipole; magnetic loops tuned by a variable inductance or a novel home-made capacitor rather than the usual vacuum variable; the Super Moxon, which adds a pair of directors to the standard Moxon Rectangle design; an orthoganally steered receive antenna that provides incredible levels of rejection of interfering signals; the homemade Wonder Whip for QRP portable operation; a mobile antenna that can double as a car roof rack—and, yes, the original Spiderbeam construction project described by its designer. Probably the most novel antenna in the 192-page paperback is the PICaYAGI by Peter Rhodes, G3XJP. This is a major constructional project in which the physical length of the elements are automatically adjusted to provide not just monoband but mono-frequency performance. Originally published in the Radio Society of Great Britain's journal RadCom, this is the first time it has appeared in print, in full. "Novel Antennas" ensures novel commercially made antennas are not excluded either, and independent reviews can be found of the unusual-looking Bilal Isotron antennas; the OptiBeam OBW10-5, which combines a 5-element driver cell with both Moxon and Yagi-type elements in a novel hybrid design; InnovAntennas' new Opposing Phase Driven Element System (OP-DES) and Loop Fed Array (LFA) designs, and several others. With material included from no less than 57 different authors, the book shows the ingenuity of radio amateurs around the world knows no bounds. With designs from the UK, USA, Canada, France, Germany, Italy, Sweden and even El Salvador, there will be something of interest to all antenna experimenters.
( 3 )
$23.99
CTU Books 2022 Contest University Textbooks
CTU Books 2022 Contest University Textbooks are here! The annual Hamvention contesting seminar text can update your knowledge of contesting, station design and preparations from the leaders in the hobby. Discover what others have learned over decades of operations, as well as new information, techniques, equipment and contesting perspectives. Skip the trial and error; learn how to get the edge to improve your scores and put your station in the winner's circle! Over the past 16 years, Contest University has presented over 40 times around the world to teach Radiosport techniques and practices. In addition to the US and Puerto Rico, seven countries have hosted CTUs--Australia, Russia, Germany, Italy, England, Brazil, and Finland. More than 7,000 students have attended these classes where over 90 CTU instructors have shared their contesting experience and expertise. In the words of CTU Chairman Tim Duffy, K3LR, "Contest University is a platform for sharing ideas and learning new ways to enjoy Amateur Radio Contesting." CTU program content changes from year to year to cover a myriad of topics. 2022 Contest University Textbooks contain, in print, the complete sets of slides presented by each professor at CTU at the 2022 Dayton Hamvention. Topics and Presenters include: * Inside vs. Outside – How to Enjoy Contesting; Dave McCarty, K5GN * Easy to Build Low Band Receiving Antennas for Small & Large Lots; Frank Donovan, W3LPL * Contesting 101: Operating; Doug Grant, Doug Grant, K1DG * The Advantages of Waterfall Displays for Contesting and DXing; Bob Wilson, N6TV * Digital Contesting – RTTY and FT8/FT4; Ed Muns, W0YK * How to Improve Your Transmitting Antennas for Solar Cycle 25; Frank Donovan, W3LPL * Grounding and Bonding for Your HF Contest Station; Ward Silver, N0AX * Operating Mechanics: The Xfactor in Contesting Success; Pat Barkey, N9RV * Upping Your Digital Contesting Game; Ed Muns, W0YK * Preparing Your Station for Competition; Frank Donovan, W3LPL * Field Measurements and Comparison of Low Band Receive Arrays; Joel Harrison, W5ZN * Everything You Want to Know about USB & Serial Interfaces; Bob Wilson, N6TV * Perspectives on 45 Years of Contest Station Building; Pat Barkey, N9RV * Teamwork and Multi-Operator Innovations; Tim Coker, N6WIN * Tower Climbing and Tower Safety: Tim Jellison, W3YQ * Transceiver Performance for the HF Contest and DX Operator; Rob Sherwood, NC0B * Glossary; Pat Barkey, N9RV (Alone, this awesome glossary of contesting related terms is well worth the purchase price!) 2022 Contest University Textbooks have over 374 pages; most of which are talking-point presentation slides, with two slides per page. However, many pages are devoted to the honor and order of the contesting fraternity. Order your copy today and take the first steps on a life-long journey of becoming a more successful Amateur Radio contest operator. Additional Features and Specifications: ISBN#: 978-1-62595-136-6 Pages: 374
Not Yet Reviewed
$24.99
DX Engineering CC4-CON Control Console and Switch Relay Unit Connectors
DX Engineering CC4-CON Control Console and Relay Unit Connectors are green 5-pin female connectors for the ends of control lines, that mate to the male connectors on these DX Engineering products: TFS4 series Transmit Four Square relay units CC-4SQR Transmit Four Square Control Consoles RFS-2 Receive Four Square relay units RFS-3 Receive Four Square relay units DVA series Dual Vertical Array relay units FVC-1 Feedline Voltage Controllers PS-2B PRO-STACK Two Antenna Phasing System CC8 Deluxe Switch Control Consoles CC8A Deluxe Switch Control Consoles They feature the convenience of a removable connector with compression screw terminals for easy connection the control wires.
Not Yet Reviewed
$20.99