Availability
13 Results Found For "anchor"
Chelegance JROD-30 Rope Guying Anchors
Chelegance JROD-30 Rope Guying Anchors are 11.81 Inches long and designed to be screwed down into the ground to provide a solid point to attach rope for guying a portable tripod or mast. Comes with two tools to assist in screwing the anchors in: a manual T-shaped handle and a bit to attach to a battery-operated drill. Featuring a spiral design 6 inches long, and a center rod that is 0.5 inches in diameter, these anchors are easy to drive into most soil and will stay put. Sold as a set of four.
Not Yet Reviewed
$33.99
DMV Rope Guying Earth Anchors
DMV Rope Guying Earth Anchors are designed for use on ropes to build a custom guying system for your vertical antenna. They are manufactured from high-quality steel and have a protective finish applied for long-lasting durability. DMV Rope Guying Earth Anchors feature a specially designed twisted base to allow for easy installation in the ground. Specifications: - Shaft Diameter: 0.5 in. - Loop Height: 2.24 in. (loop tip to outside top of the loop) - Anchor Length: 15.00 in. - Anchor Width: 3.0 in.
Not Yet Reviewed
$47.96
ROHN Tower Base Bolts
ROHN Tower Base Bolts are galvanized steel bolts that are set into the concrete base pier when it is poured. These bolts anchor ROHN Tower Concrete Base Plates and Hinged Base Plates to the concrete pier.
( 4 )
$31.99
—
$35.99
DX Engineering Radial Wire Metal Anchor Pins
DX Engineering radial wire metal anchor pins are perfect for fastening radials below the grass line to eliminate the risk of damaging your radials during lawn maintenance. They are manufactured from 11-gauge steel and are 6 in. long to help keep the cables buried properly.
( 39 )
$22.99
Chelegance Guy Line Anchors
Chelegance Guy Line Anchor Rods are made from steel with a shaft diameter of 9mm, just under 3/8in. and they are 7.9 inches in length, with a built-in hook that makes tying off your guy ropes a breeze. Sold in packs of 4.
Not Yet Reviewed
$20.99
ROHN Guy Anchor Ground Clamps
ROHN Guy Anchor Ground Clamps are used in conjunction with their Guy Anchor Grounding Kits (ROH-AGK1GGX) to provide an efficient guy-anchor ground. These grounding clamps fit round members (rod) from 0.5 to 0.75 in. nominal diameter. They will clamp AWG 6 solid or up to 7/16 HS or EHS wire rope to the solid round rod. These clamps are of tinned bronze and stainless hardware. Tinned bronze is corrosion resistant and will last a long, long time. Their high-compression U-bolt really applies pressure to the conductor and anchor rod. This high pressure creates a low-resistance connection for effective grounding. Order ROHN Guy Anchor Ground Clamps from DX Engineering!
Not Yet Reviewed
$45.99
SOTAbeams Multi-Function Guying Kit for Tactical 7000hds
SOTAbeams MFGK-7000 is the Multi-Function Guying Kit for Tactical 7000hds. Included in this all-in-one pack you will find everything required to cover most guying requirements for SOTAbeams most popular Tactical 7000hds portable mast. Included in the kit is: * (1) Tactical Guying Ring (35 mm) * (1) Tactical Guying Ring (22 mm) * (2) Tactical Top Insulators * (1) Wire Winder (Green) * (1) 50 m (160 ft.) reel stealth cord * (1) Antenna bag (Green) * (4) Aluminum anchor pegs This kit offers savings over buying the items individually and allows users greater flexibility in guying options when used with the Tactical 7000hds compact heavy-duty 7 m (23 ft.) mast.
Not Yet Reviewed
$45.99
SOTAbeams Multi-Function Guying Kit for Tactical Mini Mast
SOTAbeams Multi-Function Guying Kit for the Tactical Mini Mast is SOTAbeams MFGK-102 and is DX Engineering SBM-MFGK-MINI. Included in this package is everything needed for guying SOTAbeams small mast, the Tactical Mini. Included in this kit is: * (1) Lightweight Guying Ring (29.6 mm I.D.) * (1) Lightweight Guying Ring (9.6 mm I.D.) * (2) Top Insulators * (1) Wire Winder (color may vary) * (1) 50m (160 ft.) Reel Hi-Viz Cord * (1) Antenna Bag (color may vary) * (4) Aluminum Anchor Pegs The MFGK-MINI offers a useful saving over buying the various items individually and allows users great flexibility in guying options.
( 1 )
$43.99
DX Engineering Portable VHF/UHF Antenna Mounts
Designed for rapid deployment in portable operations, the DXE-MOBILEPORT-U is the ideal solution for mounting VHF/UHF or GMRS vertical antennas in the field. Whether you're camping, participating in Field Day, supporting EmComm activities, or setting up a temporary station, this mounting plate simplifies antenna setup in challenging environments. The center hole is sized to fit over collapsible masts like the DXE Nomad fiberglass mast, providing a stable and secure base. Four outer holes serve dual purposes: they can anchor guy lines for mast stabilization and support soldered wires to create a ground plane—if your antenna requires one. However, for best performance and simplicity, a no-ground-plane-required antenna is recommended. Compact, lightweight, and versatile, the DX Engineering MOBILEPORT-U Portable VHF/UHF Antenna Mounts are a must-have for any portable antenna deployment kit. Important Note: This mounting plate is intended for use with fiberglass masts only. Carbon fiber masts are not recommended, as they may interfere with RF signals and cause SWR issues due to their conductive properties.
Not Yet Reviewed
$29.99
Performance Tool Wall Mount Storage Racks
Performance Tool wall mount storage racks are a handy solution for storing your hardware, tools, and other small items and supplies. These racks mount directly to the wall studs with the included screws and wall anchors. Their powdercoated steel construction resists corrosion for years of use. Performance Tool wall mount storage racks include screw and wall anchors and various sized removable bins that are designed so that the contents are easily seen and accessed. These storage racks are great for your garage, office, home, or garden shed--anywhere you need convenient, easy-to-manage storage.
Not Yet Reviewed
$27.99
Champion Radio's Up the Tower: The Complete Guide to Tower Construction
Champion Radio's UP THE TOWER: The Complete Guide to Tower Construction is loaded with professional tower experience gained on the installation of over 200 amateur stations and dozens of commercial radio sites. Steve Morris, K7LXC, has taken all of his hard-earned lessons and put them together in one comprehensive book. It's over 220 pages and 35 chapters of facts, techniques, hardware information and lots of answers to your tower construction questions. Some of the chapter titles include: * Land Use Regulations of Amateur Radio Towers * Neighbors * Collecting the Hardware * Foundation and Guy Anchors * Safety and Safety Equipment * Ropes, Knots and Rope Management * Tower Erection * Rotators * Installing Beams * Maintenance and Annual Inspection * Tower Removal * A Few Final Tips The 23 additional chapters will address all of your questions and concerns regarding the installation of your Amateur Radio tower. Steve's book is THE all-inclusive guide! You want to put up a tower, but really don't know where to begin. Begin by ordering Champion Radio Products' UP THE TOWER: The Complete Guide to Tower Construction from DX Engineering and teach yourself how to do the project the right way!
( 2 )
$35.99
On Sale
WiMo Portable Mast Guy Rings
WiMo Portable Mast Guy Rings are sized for WiMo metric telescoping masts. They're made of fiberglass reinforced plastic, each with three guying thimbles for secure rope attachment without binding or cutting. These guying rings anchor themselves at the mast clamp while allowing the mast to rotate even when anchored with guy ropes. Order the size needed for your application.
( 1 )
$25.99
—
$29.99
Preformed Line Products Economy Guy line Markers
Preformed Line Products economy guy line markers help to mark and identify down guys or other wire and cable installations where anchoring devices are exposed to pedestrian and/or vehicular traffic. Do not let the word "Economy" fool you—they feature the same quality, UV-stabilized polyethylene material as their classic guy markers. The simplified design helps create a more streamlined manufacturing process. The PLP corporation is recognized as a global leader dedicated to innovating products uniquely suited to meet the needs of their customers, and their selection of Preformed Line Products economy guy line markers are proof. Additional features and specifications include: * Lightweight one-piece design * High visibility orange and yellow colors available * Dimensions – 1 1/4 in. diameter x 8 ft. long * Easily attached with a choice of 14 in. nylon universal cable ties (UCT), patented LOOP LOCK pins, or no attachment device (application dependent) * Fits on cable strands ranging from 3/16 in. to 1/2 in. (4.7mm to 12.7 mm) diameter * Installs on down guys in seconds
Not Yet Reviewed
$20.99