Availability
97 Results Found For "in-line"
Preformed Line Products Big Grip Dead Ends
Preformed Line Products Big Grip galvanized Dead Ends are available in multiple sizes to facilitate the guy line installation of your tower. Using genuine Preformed Line Products Dead Ends will give you an added sense of security, knowing that the investment you've made in your tower is stable and safe.
( 5 )
$21.49
—
$41.99
DX Engineering Guy Line Guards
DX Engineering Guy Line Guards are used on towers to prevent damage to coaxial cable rotator loops from rubbing directly on metal guy lines or dead ends. Guy Line Guards are a high visibility yellow poly plastic tubing material that is split lengthwise for easy installation on existing guys. Each Guard features a single hole for the included zip-tie to secure it in place. For coax protection they are mounted at the top of the guy lines and, since they are yellow in color, Guy Line Guards may also be mounted at the bottom of the guy lines to warn people that the guy line is present. Guy Line Guards are approximately 45 inches (1.14 m) in length and come in a set of three.
( 4 )
$35.99
Tower Guy Line Galvanized Turnbuckles
Tower Guy Line Galvanized Turnbuckles provide tension adjustments for metallic or non-metallic guy line tower support systems. These are hot-dip galvanized heavy-duty cast metal turnbuckles that have threaded casings with "E&J" Eye and Jaw or "J&J" Jaw and Jaw screw bolts at opposite ends. They are available in various sizes to provide the correct turnbuckle load capacity which is selected to exceed each guy line load rating required for the tower. With the exception of concrete and rebar, virtually every item that is required for your tower project is available from DX Engineering.
( 1 )
$38.99
—
$39.99
Phillystran PLP Big Grip Dead-Ends
Phillystran has answered the call for field-installable nonmetallic guy systems with their PLP Big Grip Dead-Ends. Designed for use with Phillystran HPTG-I Aramid fiber guy lines, PLP Big Grip Dead-Ends will ensure a stable installation for all of your antenna or tower projects. Features include: * Grips designed to match rope twist * Galvanized steel and "C" coat construction * Cross-over marks that indicate a starting point for installation * Color-coded for easy identification of strand size * Short-leg/long-leg design so installer always knows which leg should be started Designed for use with Phillystran guy line strands, PLP Big Grip Dead-Ends from DX Engineering will ensure a stable installation for all of your antenna or tower projects.
( 7 )
$20.99
—
$35.99
Preformed Line Products Economy Guy line Markers
Preformed Line Products economy guy line markers help to mark and identify down guys or other wire and cable installations where anchoring devices are exposed to pedestrian and/or vehicular traffic. Do not let the word "Economy" fool you—they feature the same quality, UV-stabilized polyethylene material as their classic guy markers. The simplified design helps create a more streamlined manufacturing process. The PLP corporation is recognized as a global leader dedicated to innovating products uniquely suited to meet the needs of their customers, and their selection of Preformed Line Products economy guy line markers are proof. Additional features and specifications include: * Lightweight one-piece design * High visibility orange and yellow colors available * Dimensions – 1 1/4 in. diameter x 8 ft. long * Easily attached with a choice of 14 in. nylon universal cable ties (UCT), patented LOOP LOCK pins, or no attachment device (application dependent) * Fits on cable strands ranging from 3/16 in. to 1/2 in. (4.7mm to 12.7 mm) diameter * Installs on down guys in seconds
Not Yet Reviewed
$20.99
Mastrant Antenna Support and Guy Line Ropes
Mastrant Antenna Support and Guy Line Ropes are available in several sizes and strength ratings, perfect for support of wire antennas, vertical antennas and antenna masts, as well as support of Yagi booms and elements. Mastrant ropes are of the highest quality for strength and are UV-protected for extended longevity. MASTRANT-O is a highly reflective rope (bright orange plus braided reflective tape) based on long-term proven Polyester (Dacron) product line. It is designed for maximum visibility in public places such as Field Day and POTA activities. Like all Mastrant ropes, it is UV stable and resistant to all weather conditions. It has low weight, great abrasion resistance, great durability and is nonconductive (no effect whatsoever on your antenna). Moreover, in contrast to ropes made from aramid fibers (Kevlar, Vectran, Technora, Twaron), it has knot strength about 60 %. Mastrant-P and Mastrant-R Ropes are stronger than other synthetic ropes of the same size, made from proven modern polyester. Mastrant-Q is a new rope made from a blend of polyester and polypropylene, designed specifically for guying applications. It offers an excellent performance-to-price ratio and has a knot strength of approximately 60%. It replaces Mastrant-P in diameters of 6 mm (1/4 in.) and larger. Mastrant-S is a similar polyester/polypropylene rope, distinguished by its highly reflective strands for increased visibility. Mastrant-M is their highest strength rope with the Dyneema® DM20 core, a superior synthetic rope offering high performance at an affordable price. Very high strength, negligible elongation, very low weight, and great abrasion resistance are all attributes that make Mastrant-M the best rope for guying. Larger, stronger sizes of Mastrant-M are used in Europe and other parts of the world for tower guying. Durability and safety are of prime concern to ensure that an antenna installation remains fully operational for a long time. Antennas and guy lines are exposed to changing weather conditions, mechanical strain, UV radiation, humidity, and more. These non-conductive synthetic fibers have all the necessary qualities: high strength, negligible stretch but good flexibility, long life, low moisture collection, fast drying, a minimum bending radius adding the ability to tie knots, good UV radiation resistance, weather durability and resistance to acids and alkali. Conversely, steel guying wires are heavy, difficult to work with, and their strength deteriorates with time due to corrosion and general aging. Electrical conductivity of steel guys is an undesirable feature, as they interact with the antennas and adversely modify radiation patterns. Thanks to recent developments in synthetic materials, both amateur and professional users are changing over to non-conductive guys and ropes. Mastrant offers these products for a variety of applications, from thin support lines used for wire antennas and beams, to rope guys for supporting small and portable masts and vertical antennas. When you need quality rope to install, replace, or modify your antenna systems, consider Mastrant Antenna Support and Guy Line Ropes, now available from DX Engineering.
( 186 )
$20.99
—
$49.99
Chelegance Guy Line Anchors
Chelegance Guy Line Anchor Rods are made from steel with a shaft diameter of 9mm, just under 3/8in. and they are 7.9 inches in length, with a built-in hook that makes tying off your guy ropes a breeze. Sold in packs of 4.
Not Yet Reviewed
$20.99
DX Engineering Porcelain Guy Line Strain Insulators
DX Engineering Porcelain Guy Line Strain Insulators provide the strength, insulation and isolation you need for guyed tower systems. These porcelain insulators accept large guy lines, dead ends or bent-pin shackles and are suitable for all guyed towers where breaking strength for each insulator is not exceeded. DXE-502 insulators are rated at 10,000 lbs. breaking strength. The more-massive DXE-504 insulators take that number to 12,000 lbs. of force. Stranded steel 1/4 EHS cable has a breaking strength of about 6,500 lbs. DXE-504 insulators are nearly twice that value! DX Engineering Porcelain Guy Line Strain Insulators provide flashover insulation of at least 12kV… when wet! These insulators will also let you section your steel guy lines to avoid resonant-length interactions or pattern-modifying interference with your radiated signals. They are perfect for use with synthetic guy lines too. Use them to provide steel lower guy tails to avoid vandalism or damage to synthetics due to large animals. Do towers right! Choose a good design and then buy DX Engineering Porcelain Guy Line Strain Insulators to erect and maintain towers the right way.
( 13 )
$21.99
—
$29.99
DX Engineering RF Attenuators
DX Engineering RF Attenuators are used inline with receiving equipment for testing purposes. An inline attenuator will limit the RF input to preamplifier to prevent overload or be used to pad the output of a high gain preamp to an appropriate level. Adding an inline attenuator to a receiver input allows determination of accuracy of s-meter readings on transceivers with a constant RF input signal source. Sometimes, the level of low power RF equipment needs to be reduced for measurement or to obtain the proper input level to an amplification device, such as with QRP equipment. Specifications of impedance, attenuation, power handling and connectors appear on the part number description. Order inline RF Attenuators for your test bench or shack from DX Engineering.
( 5 )
$45.99
DX Engineering Ladder Line Surge Protector Replacement Parts Kit
DX Engineering Ladder Line Surge Protector Replacement Parts Kit, DXE-LLSP-RP, is a kit to use if your DXE-LLSP should ever be damaged. In some locations with lots of lightning, or wind driven static charge buildup, a spare protector or this replacement parts kit is a smart investment. In a few locations you may never need one of these kits. But, here are the parts to rebuild the DXE-LLSP should the need ever arise. These are exactly the same components used in the DXE-LLSP. Along with a replacement PC board, the capacitors, resistors and gas discharge tubes provided are larger than those used in coaxial units. These components are rated to handle 5 kW, so the DXE-LLSP easily handles well over legal limit RF power at the high standing wave ratios expected on balanced line. Plus, the Ladder Line Surge Protector bleeds off the static charge that is collected on your antenna from wind driven sand, rain and snow! To refurbish your Ladder Line Surge Protector, order this kit of parts: DXE-LLSP-RP, DX Engineering Ladder Line Surge Protector Replacement Parts.
( 1 )
$29.99
Chelegance Guy Line Rope
Chelegance Guy Line Rope provides the support necessary to keep your antenna standing tall! These guy line ropes are sold in 328ft. (100m) lengths and they are approximately 1/4 in. (6mm) in diameter. They are made from a polyester material with a breaking strength of 500lbs. (227kg).
Not Yet Reviewed
$39.99
DX Engineering Rotator Control Line Connectors
Available here, individually, are the "remarkable and elegant" 4-pin interlocking weather-sealed rotator control line connectors that have metal bodies to provide RF shielding, as supplied with the DXE-RT4500HD. These DX Engineering Rotator Control Line Connectors are top-of-the-line cable-mount solder connectors that are intended to be used outdoors, for a lifetime of reliable control line termination. Their positive latching, moisture-sealing, quick disconnect features make them ideal to build an extension, pigtail or test cable for your DXE-RT4500HD or controller. They are a perfect match for DX Engineering DXE-CW1812OR Heavy-Duty Spec Rotator Cable, with 5 conductors: 2 x 12 AWG and 2 x 18 AWG plus 1 x 18 AWG shield. Each gender are used to build your own rotator cable assembly extension. Just as with standard power extension cords, use female for the power source end and male for the mating end of the extension, so there is never an exposed pin with voltage present. In this case, use the DXE-LP-20-F female connector on any cable, controller pigtail or the rotator end of an extension that can have a voltage present. Use the DXE-LP-20-M male connector on the controller end of the mating extension cable. DXE-LP-20-F 4-pin female to make a controller pigtail or for the end of a cable assembly that mates with the male rotator pigtail. This connector is supplied with DXE-RT4500HD Heavy Duty Rotators DXE-LP-20-M 4-pin male as supplied on the permanently mounted DXE-RT4500HD Heavy Duty Rotator. Used for the controller end of an extension cable to mate with a controller pigtail. These are the best connectors, to make the best weather-sealed 4-conductor cable assembly, for the best rotator on the market, all from DX Engineering.
Not Yet Reviewed
$20.99
Mastrant Clamcleat® Guy Line Tensioning Reels
Mastrant Clamcleat® Guy Line Tensioning Reels are designed for quick and easy tensioning and releasing of guy lines on portable antennas and masts. These Tensioning Reels, featuring Clamcleat® technology are designed for 1/4 in. (6mm) diameter rope, and ensure your ropes are secure and stored.
Not Yet Reviewed
$29.99
Yaesu DC Power Cables
Yaesu DC Power Cables are as originally supplied for your Yaesu radio. Yaesu-matched power connectors and in-line fuses allow you to safely connect your radio to a DC power supply or run it mobile. An extra DC power cable makes it easy to move your radio from one power source to another… or home to car. Replacement Yaesu DC Power Cables are available now; here at DX Engineering!
( 76 )
$25.49
—
$47.99
200 Amp Inline DC Power Analyzer and Watt Meters
200 Amp Inline DC Power Analyzer and Watt Meters allow you to measure and monitor DC power in a variety of systems such as Amateur Radio, battery, solar, wind and RC. These DC power meters read voltage, current, watts, amp/hours and watt/hours; all with high precision. Capable of measurements of 4.8-60 VDC and up to 200 amps, these inline meters are powered by the source voltage they measure and will display accumulated amp/hour and watt/hour readings until the meter is shutdown or restarted. With its low power consumption, you'll hardly notice their inline presence. By connecting a separate battery or power source to the optional Auxiliary Power Connector, these meters will precisely measure the complete range of 0-60VDC, as the measurements do not include the small amount of power required to operate the meter. The 16x2 backlit LCD screen is easy to read, even in direct sunlight.
( 3 )
$36.99
—
$47.98
Heil Sound Headset Adapter Cables
Heil Sound Headset Adapter Cables are used to interface your Heil headset to your favorite transceiver. Heil AD-1 series headset radio cables are required for Heil boom microphone headset models including PROSET Elite, PROSET, the original and reintroduced PRO-MICRO series, the lightweight, yellow BM-17 series and BM-10 series headsets, and the legacy PROSET PLUS. These cables support all of the Heil Sound Headsets that feature a 3.5 mm (1/8 in. miniature phone) mono connector for the microphone audio. Each has a female 1/4 in. mono dongle connector on a short wire for PTT keying foot switch or hand switch connection. NOTE: These Heil Headset Adapter Cable assemblies handle mic audio and keying, NOT the headphone audio. The stereo male plug on your headset cable connects directly to your transceiver headphone jack, not to the AD-1 series adapter cable. Headsets typically include stereo 1/8 in. (3.5mm) to 1/4 in. (6.35mm) headphone audio adapters. All Heil Headset Adapter Cables use commercial-grade microphone connectors with dual-exit cable clamps that are much heavier than the normal CB-type connectors that the industry had been forced to use for decades. If you have several brands of transceivers, individual adapter cables may be connected to each radio, so you may quickly and easily move your Heil boom microphone headset from one transceiver to another, without having to remove any connectors from the transceivers. All Heil audio cables are wired through to support VOX operation. Heil Sound Headset Adapter Cables are available in 4-pin and 8-pin round connectors, and 6-pin and 8-pin modular-style connectors. HSTA series Headset Adapter Cables were specially designed for the legacy Heil TRAVELER Headsets that were discontinued and are no longer available. Some of the presently available adapter cables feature an extra wire and connector to go to the transceiver external speaker connector, for those radios where receive audio is not provided on the microphone connector. On transceivers that support them, the special UP-DOWN buttons on the TRAVELER Headset cables are connected with these cables.
( 214 )
$30.00
Summit Racing™ Heavy-Duty High Amp Type III Waterproof Manual Reset Circuit Breakers
Protect critical electrical circuits with Summit Racing™ heavy-duty high amp Type III waterproof manual reset circuit breakers, engineered to provide reliable overcurrent protection for demanding automotive, marine, off-road, and powersports applications. Built with a rugged heavy-duty thermoset plastic housing and waterproof IP67-rated construction, these surface-mount breakers are designed to withstand harsh environments while safeguarding high-powered electrical systems. A convenient push-to-trip manual reset button with a visible trip indicator allows for fast diagnostics and easy resetting, while nickel-plated 3/8 in.-16 stud terminals with protective covers ensure secure, corrosion-resistant connections. Available in amperage ratings from 50 to 200 amps and rated for 48 VDC operation, these breakers meet SAE J553, ABYC-E11, and SAE J1171 ignition-protection standards, making them an ideal solution for protecting valuable wiring, accessories, and power distribution systems. Select the circuit breakers your application needs.
Not Yet Reviewed
$49.99
DMV-VAM-150-P Inline DC Multimeters
DMV-VAM-150-P Inline DC Multimeters allow you to measure and monitor DC power in a unique way. These meters read voltage, current, watts, amp/hours and watt/hours; all with high precision. Capable of handling up to 60 V DC at up to 150 amps, these inline meters are powered by the source voltage they measure. With only about 10 mA power consumption, you'll hardly notice their inline presence. The DMV-VAM-150-P comes with Powerpole connectors for you to install. Note: For additional product information, please look at the files under the "Documentation" tab. Do you REALLY want to know how much DC power you are using? Use one of these DMV-VAM-150-P Inline DC Multimeters from DX Engineering and find out for sure!
( 8 )
$38.73
Sunex Tools Ford Driveline Impact Sockets
These Ford driveline sockets by Sunex Tools were specifically designed for driveline applications on Ford Mustang, Crown Victoria, Taurus, Explorer, Expedition, Excursion, Ranger, F-150, and Mercury equivalents from the 1980s to the present. For all of your Ford impact socket needs, go with these Sunex Tools Ford driveline impact sockets.
Not Yet Reviewed
$33.99
SOTAbeams Inline Audio Ground Loop Isolator
SOTAbeams Inline Audio Ground Loop Isolator can solve some audio problems caused by RF on the line. This is passive audio transformer device that breaks the ground loop that may be contributing to RFI in your receive audio. Here are the particulars: •Ideal for connecting portable devices including smartphones, tablets and laptops to external sound gear •In-line dual isolation transformer eliminates hum, buzz and other noise caused by ground loops, while providing protection to the portable device •Stereo in and out Input: 1 x 3.5 mm male stereo plug Output: 1 x 3.5 mm female stereo jack •Isolation transformer housed in a slim, in-line cylindrical metal enclosure for best shielding •Highly flexible cable is terminated with rugged molded connectors with strain reliefs •Input/output impedance: 600 Ohms - perfect for all line level audio devices •Frequency range: 0 - 0.5dB (input to output), 50 Hz - 20 kHz •Distortion: <0.02% @ 1 kHz, 0 dBu •Cable Length: 11 in. (0.3 m)
( 1 )
$23.99
DX Engineering Radial Wire Metal Anchor Pins
DX Engineering radial wire metal anchor pins are perfect for fastening radials below the grass line to eliminate the risk of damaging your radials during lawn maintenance. They are manufactured from 11-gauge steel and are 6 in. long to help keep the cables buried properly.
( 39 )
$22.99
Heil Sound Microphone Adapter Cables
Superior-quality Heil Sound Microphone Adapter Cables, CC-1 series, are used to connect your Heil microphone to your favorite transceiver. There are two types of cables available for the two types of Heil microphones, 4-pin XLR and 3-pin XLR. Both adapter cable types feature the PTT mono 1/4 inch (6.35mm) jack at the transceiver mic connector for a foot switch or hand switch. Heil Sound Microphone Adapter Cables are available with round 8-pin, round 4-pin and 8-pin modular-style connectors for most transceivers. Most Heil Microphone adapter cables feature the special 4-pin XLR connector to serve the Heil microphones that have a built-in PTT switch. They work with the Classic, Goldline, GM, HM-12 Genesis, Handi-Mic, HM-10XD and HM-10 microphones. Use of an external foot or hand switch is optional. Conversely, the cables with the letters "XLR" in the part number have the audio industry standard 3-pin XLR microphone connector. These cables are required for the "PR" PRO Series microphones such as the PR-20, PR-28, PR-40, PR-781 and several others. Since these mics have no PTT switch, they require the use of an outboard hand or foot switch connected to the adapter cable PTT jack. Features and benefits of Heil Microphone Adapter Cables compared to others: * 100 percent silver-braid shield... keeps noise OUT * PTT control lines are OUTSIDE the shield... eliminates stray coupling * Made using commercial-audio grade 'Heilwire'... strong and supple * 18-gauge wire; not 22 or 24 like others... lower cable resistance * Commercial-grade microphone connectors (patent pending)... lasting durability * Heil dual-exit cable clamps are heavier than normal connectors... robust reliability * Outstanding engineering... lowest-noise transmit audio The XLR connector's quick-disconnect feature lets you easily move your Heil microphone from transceiver cable to transceiver cable, at the microphone end, without having to rewire a boom or remove any connectors from the transceivers. Additionally, all Heil audio cables are wired through to support VOX operation. Don't attach a high-quality microphone to cheap cable! Order your Heil Sound Microphone Adapter Cables from DX Engineering and transmit the best audio possible!
( 149 )
$30.00
—
$49.00
ERICO Ground Rods
Many hams are misinformed about the importance of proper grounding. It's paramount for safety and station efficiency to have an excellent grounding system. In any grounding system, the ground electrode provides the physical connection to the Earth and is the essential instrument used to dissipate current. ERICO Ground Rods provide the superior Earth connections you need! ERICO has decades of experience and offers a complete line of ground rods to meet Amateur Radio and industry needs. ERICO Ground Rods have these great features: * 99.9 percent pure electrolytic copper coating * Manufactured of high strength 1018 cold drawn steel * Specifically manufactured to work with other ERICO/CADWELD products, like ONE SHOT * Molecular bond to nickel-sealed high strength steel core * Copper coating will not crack when bent or tear when driven * Rods have a high carbon steel core and tip that provide superior strength when driving * Resist corrosion better than galvanized rods allowing for approximately 30-year service life in most soils * Minimum tensile strength of 80,000 psi and straightness tolerance of .010 in. per linear foot * State of the art manufacturing process helps ensure uniform plating thickness * ERICO name, length, diameter and part number is roll-stamped within 12 in. (304.8 mm) of chamfered end * UL logo and control number where applicable stamped on each rod for easy inspection after installation * Minimum copper coating of 10 mils on Rods Listed To Meet UL 467 * Exceed the requirements of ANSI®/UL® 467, CSA, and ANSI/NEMA GR-1 ERICO Ground Rods are a vital part of your station and antenna grounding systems. These superior ground rods will guarantee an efficient Earth ground and enhance your station's safety and efficiency. Order your ERICO Ground Rods from DX Engineering!
( 27 )
$22.99
—
$46.99
bhi Extension Speakers
bhi Ltd Extension Speakers are robust, well made speakers that are suitable for use with bhi in-line DSP modules or as a standalone external speaker for your radio. For a standard, non-DSP external speaker, choose from these three rugged, high-quality bhi models: * EXTSPK25 * LSPKR * SPKR8 Details on each appear below: * EXTSPK25 features: -- This model is destined to be considered as one of the best sounding passive Extension Speakers on the market! The EXTSPK25 is a top-of-the-line 8 ohm two-way passive speaker for the shack. It is a well-crafted large speaker which is essentially the same as the bhi DESKTOP model, but without the built-in DSP and power amplifier. Perfect for direct connection to DSP units with audio power amplifiers such as the bhi EQ20, it may also be connected directly to a transceiver. The EXTSPK25 features a 4 in. bass driver and a 1 in. tweeter for excellent audio. It connects with most transceiver and receiver standard mono "external speaker" output or a DSP unit speaker output. * LSPKR features: -- Large, full range 4 in. mobile-style extension speaker -- Adjustable mounting bracket that also serves as a stand -- 20 watts power handling -- 4 Ohm impedance -- 78 in. integral cable with 3.5mm mono plug * SPKR8 features: -- Compact, 3 in. communications speaker -- Pedestal stand--flat surface mount with speaker angle adjustments -- Passive Noise filter -- Frequency 100 to 10KHz -- 8 watts power handling -- 8 ohm impedance -- Integral cable with 3.5mm mono plug -- Dims: 3.54 x 3.58 x 5.28 in (90 x 91 x 134 mm) -- Weight: 1.2 lbs. (0.56Kg)
( 14 )
$49.99