Availability
Parts and Accessories
Manufacturer Rebate
ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver
ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.
( 127 )
$2,099.95
4O3A Tuner Genius XL 1X3 Antenna Tuners
4O3A Tuner Genius XL 1X3 Antenna Tuners are high-performance, fully automatic antenna tuners designed to meet the demands of serious Amateur Radio operators. Covering a wide frequency range from 1.8 to 54MHz, they can match antennas up to 10:1 SWR and handle up to 2,000W. Built to commercial-grade standards, the TGXL is ideal for contesting, DXing, and high-duty-cycle digital modes. TGXL integrates seamlessly with FlexRadio's 6000 and 8000 series transceivers and the Power Genius XL, while also supporting a wide range of third-party radios via LAN, RS232, CI-V, and more. With intuitive control via the front panel or Windows software, the TGXL offers unmatched flexibility and performance in a compact, rack-mountable design.
( 1 )
$2,399.99
FlexRadio 8600 HF/6-Meter Signature Series SDR Transceivers
FlexRadio 8600 HF/6-Meter Signature Series SDR Transceivers deliver top-tier performance using direct sampling SDR technology, making it an ideal choice for serious HF and 6-meter operators. Designed for remote operation, the FLEX-8600 functions exclusively as a server, accessible via PC, laptop, Maestro, Mac*, or iOS* clients—locally or remotely. This model supports Adaptive Predistortion and includes a built-in antenna tuner, 10 MHz reference input, and an integrated GPS receiver with antenna to maintain frequency stability without manual adjustment. An optional GPSDO module is available for ultra-high frequency precision and accuracy. (sold separately) The FLEX-8600 features direct sampling SDR at 245.76 Msps with 16-bit resolution, achieving 115 dB RMDR at 2 kHz and >155 dB dynamic range. It supports 100W PEP HF-6m operation across all modes and bands, with contest-grade band filters offering >50 dB rejection for superior signal isolation. Operators can utilize four independent 14 MHz spectrum/waterfall displays and four independent band/mode receivers, offering game-changing band awareness. The transceiver supports full duplex cross-band operation on two antennas, allowing simultaneous transmit and receive on different bands without external equipment. It also enables true diversity reception to improve weak signal detection in high interference environments. Additional connectivity includes two receive-only ports and two transverter/exciter ports, which can also serve as receive antenna inputs. The FLEX-8600 provides an economical SO2R solution with OTSPR support, enabling a complete legal-limit, all-mode SO2R station when paired with the Power Genius XL LDMOS solid-state amplifier—requiring only one radio, one amp, and three cables. (amp and cable sold separately) FlexRadio's SmartSDR™ software ensures compatibility across the entire FLEX-8000 series and supports continuous software enhancements. With SmartLink™ technology, users can access their radio from anywhere using any SmartSDR-compatible client with just a login and password—even from an iPhone.
Not Yet Reviewed
$4,899.00
4O3A Tuner Genius XL SO2R Antenna Tuners
4O3A Tuner Genius XL SO2R Antenna Tuners are fully automatic, high-power antenna tuners designed specifically for Single Operator, Two Radio (SO2R) operation, and feature dual inputs and dual outputs. Each input is independently paired with one output. Covering 1.8 to 54 MHz, it can match antennas with up to 10:1 SWR and handle up to 2000W, making them ideal for high-performance contesting and DXing. Built to commercial-grade standards, the TGXL SO2R integrates seamlessly with FlexRadio's 6000 and 8000 series transceivers and the Power Genius XL amplifier, while also supporting third-party radios via LAN, RS232, CI-V, and other interfaces. With intuitive control via front panel or Windows software, the TGXL-SO delivers unmatched flexibility, precision, and automation for serious operators.
( 5 )
$2,499.00
ACOM 1010 HF Linear Amplifiers
ACOM 1010 HF Linear Amplifiers cover all bands from 1.8 through 29.7 MHz. They provide over 700 W PEP output (or 500 W continuous-modes) with less than 60 watts of drive and operate without special transceiver signaling; they need only "ground on TX" and the required drive. ACOM's exclusive True Resistance Indicator (TRI); enables faster antenna changes and use over wider frequency ranges. Also, a built-in antenna selector switch with two outputs is included to provide instant choice of antennas. Antenna matching can be achieved in less than 10 seconds and at a quarter of nominal output power, which results in lower risk of interference to other stations and greater safety to the amplifier components. A single ACOM 4CX800A high-performance ceramic-metal tetrode with plate dissipation of 800 watts is used for maximum efficiency. These amplifiers are self-monitoring. They are designed to safely withstand up to 240 watts of reflected power, up to 100 milliseconds of drive spikes (RF "tails" after a PTT or KEY release), and even operator tuning errors. They are also capable of operating at more than half their designed output at only 75 percent of nominal line voltage. Because they can tolerate deep voltage drops and 15 percent line voltage spikes, they are particularly well-suited for use in portable environments, such as Field Day and DXpeditions. Importantly, a variety of system parameters are continuously monitored and available to the operator to assure safe and efficient amplifier operation. Design of the high-voltage power supply eliminates the danger of turn-on transients affecting sensitive devices connected to the same line (mains) circuit. Moreover, the amplifier can be configured to accommodate any of eight nominal line voltages between 100 and 240 V, 50 or 60 Hz. Please see the SPECIAL Note, below. ACOM 1010 specifications: * Frequency Coverage: All amateur bands in the 1.8-29.7MHz frequency range * Power Output: 700 W PEP or 500 W continuous modes. * Intermodulation Distortion: Better than 35 dB below rated output. * Hum and noise: Better than 40 dB below rated output. * Harmonic Output Suppression: Better than 50 dB below rated output. * Input and Output Impedance: Output: 50 Ohm unbalanced, SO-239 connectors; Input circuit: broadband, VSWR less than 1.3:1, 1.8-30 MHz continuously (no tuning, no switching); Bypass path: VSWR less than 1.1:1, 1.8-30 MHz continuously, 200 W maximum * RF Gain: 11dB, frequency response less than 1dB (50 to 70 W drive for rated output) * AC Power: 85-132 V/170-264 V ac (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps, plus 10 percent to minus 15 percent tolerance), 50-60 Hz, single phase, 1,200 VA * SPECIAL Note: Order part number AOM-1010 to wire your AC plug after removing European plug yourself; order part number AOM-1010-240 for pre-wired 240 volt operation (NEMA 6-15P) or part number AOM-1010-120 for pre-wired 120 volt operation (NEMA 5-15P). * Operating environments: Temperature range; 32 to 122 degrees F, Humidity; up to 95 percent at 95 degrees F, Altitude; up to 10,000 above sea level without output deterioration. * Complies with FCC-regulations as well as CE safety and electromagnetic compatibility requirements * Dimensions, (in.) 15.83 W x 12.4 D x 6.5 H * Weight: 39.7 lbs. Note: For additional information, please look at the files under the "Documentation" tab. Get one of these highly-advanced HF amplifiers for your shack. Order an ACOM 1010 HF Linear Amplifier from DX Engineering… today! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.
( 53 )
$3,376.99
FlexRadio 8400 Signature Series HF/6-Meter SDR Transceivers
FlexRadio 8400 Signature Series SDR Transceivers offer the latest in high-performance, direct sampling software-defined radio (SDR) technology designed for the HF and 6-meter amateur bands. Designed for hams who operate exclusively via remote access, the FLEX-8400 is engineered as a server-based SDR transceiver. It supports SmartSDR clients on Windows, Mac, iOS, and Maestro, allowing seamless control from virtually anywhere. With dual independent receivers and full duplex cross-band capability, it's ideal for DXing, contesting, and digital modes—no external sound cards or interfaces required. Using a PC, laptop, or Mac client, the FLEX-8400 supports up to two 7 MHz spectrum/waterfall displays and independent receivers, providing enhanced band visibility. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external interfaces required. The radio delivers advanced band awareness, low phase noise, brick wall filters, and high-quality audio performance to support a wide range of operating styles.
( 4 )
$2,499.00
Manufacturer Rebate
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 4 )
$3,999.95
FlexRadio 8400M HF/6-Meter Signature Series SDR Transceivers
SDR technology, paired with a high-resolution display and ergonomic controls. The FLEX-8400M combines all the capabilities of the FLEX-8400 with a stunning 8-inch 1920×1200 IPS WUXGA touchscreen and intuitive controls, delivering high-performance SDR functionality in a traditional radio interface. Unmatched band awareness comes from the integrated display, while support for external monitors at 1900×1200 resolution enhances spectral visibility. Designed with input from top contest and DX operators, the symmetrical and independent dual VFO controls are strategically placed to maximize productivity across all operating styles. Fully self-contained, the transceiver requires no PC, network, or steep learning curve—just plug in and operate. When connected to a PC, laptop, or Mac client, users can access up to two 7 MHz spectrum/waterfall displays and independent receivers, transforming how bands are viewed. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external boxes needed. FlexRadio's industry-leading SmartSDR™ software ensures compatibility across the entire FLEX-8000 Signature Series, enabling continuous software enhancements. With SmartLink™ technology, remote access is simple—just log in from any SmartSDR-compatible client, including an iPhone.
( 5 )
$3,466.55
—
$3,649.00
DX Engineering RT4500HD Heavy-Duty Rotators
DX Engineering RT4500HD Heavy-Duty Rotator – The ultimate azimuth positioning rotator, purpose-built to work flawlessly for many years in a majority of tower mounted directional antenna systems. Every aspect of this rotator was designed for high-strength, ease of installation, serviceability and longevity. This rotator is extremely capable and worry-free for tower mast mounted directional antennas. The RT4500HD Heavy-Duty Rotator has capabilities that rival most rotators available on the Amateur Radio market. With an impressive list of features and benefits, it is noteworthy that this rotator does not have mechanical limit switches. Soft rotation limits are set in the optional controller to match the limits of the installed antenna cables. If the antenna or the mast ever slips, simply reset the controller to the new center of rotation and recalibrate the rotational range. Climbing or antenna mast repositioning is not immediately required. The part number DXE-RT4500HD is the stand-alone rotator unit only, which does not include a Top Mast Clamp. This allows for the selection of one of two different size Rotator Top HD Mast Clamps available, both also sold separately, that matches popular mast outside diameters (OD); DXE-RTMC-2 for 2-inch OD mast and DXE-RTMC-3 for 3-inch OD mast. Similar part numbers with added suffixes represent combinations that include the DX Engineering RT4500HD Heavy-Duty Rotator with either the 2-inch or the 3-inch Rotator Top HD Mast Clamp. Other part numbers include either the DXE-RT-21DXE Digital Rotator Controller or the microHAM ARCO Advanced Rotator Controller. Rotator control cables and cable assemblies are sold separately. Features and benefits of the extremely durable RT4500HD Heavy-Duty Rotator: • Superior Rotational Torque > 4,400 in. lbs. with high ratio worm gear drive powered by an extra heavy-duty 24VDC motor • Exceptional Braking Torque >18,500 in. lbs. by high ratio gear reduction that prevents rotation of the mast mounted antenna system due to wind • Very high Vertical Load Capacity — internal needle thrust bearing handles up to 2,000 lbs. • High-compression Heavy-Duty Top Mount Mast Clamps are available for 2-inch OD or 3-inch OD masts • Precision Movement — accuracy within +/-0.1 degrees with high resolution pulse counter • Easy Maintenance — access panel allows service of pulse counter switch without removing the rotator from the tower • Built for Longer Life — hardened steel gears welded onto shafts prevent slippage and shearing of key pins; larger main gear provides increased strength • Weather-Protected — sloped body sheds water; seals at the output shaft, the intermediate plate and the access panel keep moisture out; weep holes make sure it stays dry • Worry-Free Installation — standard four-bolt mount (same as Hy-Gain T2X/HAM); this triangular-shaped rotator fits inside ROHN 25G and Amerite 25 towers and on Accessory Shelves (rotor plates), including the DXE-AS25G and DXE-AS-455G. However, the RT4500HD easily handles antenna systems larger than the 25G will safely handle. Rohn 45G, 55G and up, Amerite 45 and 55, and many other high strength towers are recommended • Works with High-Quality Accessories — Optional DX Engineering DXE-RT-21DXE Digital Rotator Controller, or the microHAM ARCO Advanced Rotator Controller or other 24VDC Pulse Counting Programmable Controller. Install the rotator that provides the most accurate and dependable operations – the DX Engineering RT4500HD Heavy-Duty Rotator.
( 4 )
$2,469.99
—
$2,569.99
ICOM IC-R8600 Communications Receivers
ICOM IC-R8600 Communications Receivers represent the Next-Generation in World-Class Receivers! And the next step in SDR evolution! Why a Next-Generation, World-Class Receiver? While ordinary wide band receivers need to have dedicated demodulator circuits for each receive mode, the IC-R8600 utilizes advanced digital processes that demodulate the incoming signals. The IF signal is sent to the A/D converter, resulting in a digital signal, which is then processed by a high-speed FPGA (Field Programmable Gate Array) and DSP to be restored to an analog audio signal. The received signal is processed to be demodulated according to the receive mode, including not only conventional analog communications in CW, AM, SSB, FM, WFM and FSK, but also advanced digital communications such as D-STAR, P25, NXDN, dPMR and DCR. Of course, this is easily achieved by using Software Defined Radio (SDR) technology. Here is some additional Information for ICOM's IC-R8600 Wideband Communications Receiver with Multiple Digital-Mode Decoders: * 10 kHz to 3 GHz general coverage (YES! That's 3.0 GHz!) * Ultra-wide frequency coverage with RSSI (Received Signal Strength Indication) function * Fast moving, real-time spectrum scope and waterfall functions * Large 4.3 in. TFT color touch screen display * Decodes multiple digital protocols, including D-STAR, NXDN™, dPMR™ and APCO P25 * Cellular blocked * I/Q signal output for use with third-party SDR software and/or external decoding * Optional RS-R8600 PC remote control software allows control of all receiver functions * Clear audio quality using FPGA/DSP base architecture with Superheterodyne circuitry * SD card slot for received log, decode log and voice recording * Optional SP-39AD external speaker with integrated receiver power supply Additional features include: * PL-259 Antenna Connector * Type-N Antenna Connector * RCA Antenna Connector (500 ohms- for long wire antennas, etc.) * MUTE Input Jack- Use your R8600 with your favorite transmitter! * 10.7 MHz IF Output Jack * 10 MHz Reference Frequency Input/Output * I/Q Output Jack * Ethernet Connector * S-meter Output Jack * External Speaker Jack * AF/IF Output Jack * ICOM CI-V Remote Control Jack * USB Connector * DC Power Socket * DC IN Jack (12V nominal) * AUX Jack * Ground Terminal Note: Please look at the associated files under the "Documentation" tab for additional product information, including an instruction manual. ICOM's IC-7300 transceiver is renowned for its superior SDR receiver technology. Why not own a communications receiver based on that very same success? Order an ICOM IC-R8600 Communications Receiver for your SWL or Amateur Radio operations!
( 16 )
$2,799.95
—
$3,249.95
ACOM 1000 HF + 6 Meter Linear Amplifiers
ACOM 1000 HF + 6 Meter Linear Amplifiers are the world's best value in an Amateur HF amplifier. These amps provide you a comfortable 1,000 watts output on all amateur bands from 160 through 6 meters. The plate-load True Resistance Indicator (TRI) is a powerful tuning aid which helps the operator to quickly and precisely match antennas. The auto-operate function (when enabled) maintains the amplifier in OPERATE mode for you, saving on manual operations. Broadband input matches to the transceiver over the entire range of 1.8-54 MHz. ACOM 1000 amplifiers are both user-friendly and look after themselves. They are designed to safely withstand up to 300 watts reflected power, drive spikes of up to 100 milliseconds duration, drive RF "tails" after a PTT or KEY release and the operator's inadvertent tuning errors. They also withstand a "soft" AC line and will deliver more than half power at only 75 percent of nominal mains voltage. They can withstand voltage drops for up to 10 milliseconds, and up to 15 percent higher line-voltage spikes. These details are all important, particularly when used at Field Day, on DXpeditions and other portable operations. Be sure to read the SPECIAL Note, below. An ACOM 4CX800A high-performance ceramic/metal tetrode with plate dissipation of 800 watts is employed. On-board processing provides permanent monitoring and protection of plate and grid voltages and currents, as well as the exhaust temperature. Text messages, 12 different parameters, and strip peak-reading PEP meter are displayed on a dot-matrix, back-lighted LCD. LED indicators are provided for OPERATE, attenuator-on, and ON/OFF conditions. Records of the amplifier internal status are stored in nonvolatile memory for the seven most-recent auto-protection trips. This information is very valuable should diagnostics be needed. The input bypassing and the vacuum antenna relays are very quiet even in CW mode due to their special mounting. This results in virtually noise-free QSK! ACOM-1000 details: * Frequency Coverage: 1.8-54 MHz * Power Output: 1,000W PEP or continuous carrier; for continuous carrier transmissions longer than 15 minutes the external auxiliary fan must be installed * Intermodulation Distortion: Better than 35dB below rated output * Hum and noise: Better than 40dB below rated output * Harmonic Output Suppression: 1.8-29.7 MHz; 50dB below rated output, 50-54 MHz; 66dB below rated output * Input and Output Impedances: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-54 MHz; Bypass path: VSWR less than 1.1:1, 1.8-54 MHz continuously * RF Gain: 12.5dB typically, frequency response less than 1dB (50-60W drive power for rated output) * Primary Power: 170-264V (200, 210, 220, 230 and 240V nominal taps), 50-60Hz, single phase, 2200VA consumption at rated output. 230 or 240 volts recommended for USA * SPECIAL Note: Order part number AOM-1000 to wire the AC plug and voltage selection yourself; order part number AOM-1000-240 for pre-wired 240 volt operation or part number AOM-1000-120 for pre-wired 120 volt operation * Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations * Size: 16.6 x 14 x 7.2 in. * Weight 58.5 lbs. * Operating environments: Temperature range 32 to 122 degrees F, Humidity up to 95 percent at 95 F * Altitude: up to 3,000m (10,000 ft.) above sea level without output deterioration Note: For additional information, please look at the files under the "Documentation" tab. ACOM says that these are the "world's best value" in an Amateur HF amplifier. Order one of these ACOM 1000 HF + 6M Linear Amplifiers from DX Engineering and decide for yourself! Note: During and after your amplifier's warranty period, DX Engineering will provide service and repair for ACOM amplifiers. A repair fee will be charged for services outside the warranty period.
( 47 )
$4,364.99
ACOM 1200S Solid State HF + 6 Meter Amplifiers
ACOM 1200S Solid State HF + 6 Meter Amplifiers cover the amateur bands from 1.8 through 54MHz. They provide 1000W output power (PEP or continuous carrier) with less than 50W of drive on 240VAC (max. 500W out on 25W RF input on 120VAC). All operational conditions are visible on a multi-function high-resolution color display. Note: To install your own power plug, order AOM-1200S (you remove the European plug) For a 120 Volt plug (NEMA 5-15P), order AOM-1200S-120 (500 watts) For a 240 Volt plug (NEMA 6-15P), order AOM-1200S-240 (1,000 watts) All part numbers include a power cable. Features include: * Five-inch (5 in.) (108x65mm) high resolution color display, 800x480 pixels and 24-bit color * Final stage uses rugged LDMOS transistor - BLF188XR or equivalent. * Compatible with all transceiver models available on the market - does not need any special signals: "ground on transmit" (PTT out) and typically less than 50W of RF drive power is sufficient for full power on 240VAC; a maximum of 25W input on 120VAC. * Broadband input circuit provides a perfect transceiver load with SWR below 1.2:1 (typically 1.1:1), with no amplifier tuning, throughout the frequency range 1.8 to 54MHz * The overall operation of ACOM 1200S is extremely simplified: the screen menus are intuitive and easy to follow * Optional automatic control – when connected to a transceiver with a CAT interface, the amplifier monitors constantly, follows the operating frequency, and changes the bands accordingly * If NOT CONNECTED with CAT interface, the amplifier monitors the RF input with a built-in frequency counter and automatically switches bands * Remotely controlled by RS232 interface * Protects itself during operation due to continuous protection circuits in all modes * The user can monitor more than 10 parameters * Easy maintenance – detailed data (55 parameters) about each of the last 28 protection trips is stored in the amplifier's nonvolatile memory * Convenient field operation: extremely compact and lightweight construction, extended mains voltage range (93V to 265V), limited inrush current and Power Factor Correction (PFC) – all significant parameters in operation from unstable mains, generators etc. features achieved thanks to the built-in switching mode power supply (SMPS) a) Rated output power: 1000W plus/minus 0.5dB, PEP or continuous carrier (1200W PEP max.). b) Intermodulation distortions (IMD3): better than 30dB below the rated PEP output. c) Harmonic and parasitic emissions output suppression: better than 60dB (65dB typically). d) Input and output impedances: nominal value: 50 Ohm unbalanced, UHF (SO-239) type connectors; * Input circuit: broadband, SWR below 1.2:1 (1.1:1 typically); 1.8 – 54 MHz continuous range without retuning or switching * Admissible SWR at the output load (the antenna): up to 3:1 with proportional power reduction and up to 1.5:1 for full output power e) RF power gain: 13dB plus minus 1dB f) Automatic AC voltage Input Handling: 93 to 265VAC (no internal wiring change needed) g) AC Input power consumption at full output power: 2000 VA or less with a power factor of 0.95 or higher h) AC mains power consumption in Low Energy (waiting) mode: less than 1VA i) Complies with EU safety regulations and electromagnetic compatibility standards, as well as with the US Federal Communications Commission (FCC) rules j) Environmental * Temperature range: -10 C to +40 C (14 F to 104 F) * Relative air humidity: up to 95 percent at 35 C (95 F) k) Dimensions and weight: (D x W x H) 418 x 372 x 162 mm (16.46 x 14.65 x 6.38 In); 14.5 kg (31.97 lbs.) Supplied with: - A power cord - A manual with a CE declaration of compliance; - Two 10A fuses for operation on 200-240VAC or 100-120VAC mains. These amplifiers offer fully automatic operation and superior solid state performance. To upgrade your station, order ACOM 1200S Solid State HF + 6 Meter Amplifiers from DX Engineering.
( 29 )
$4,750.99
FlexRadio 8400ATU Signature Series HF/6-Meter SDR Transceivers
FlexRadio 8400ATU Signature Series SDR Transceivers offer the latest in high-performance, direct sampling software-defined radio (SDR) technology designed for the HF and 6-meter amateur bands. Designed for hams who operate exclusively via remote access, the FLEX-8400 is engineered as a server-based SDR transceiver. It supports SmartSDR clients on Windows, Mac, iOS, and Maestro, allowing seamless control from virtually anywhere. With dual independent receivers and full duplex cross-band capability, it's ideal for DXing, contesting, and digital modes—no external sound cards or interfaces required. The integrated automatic antenna tuner (ATU) is designed to match antennas with up to 3:1 SWR on 80–10 meters and up to 2.5:1 SWR on 160 and 6 meters. Using a PC, laptop, or Mac client, the FLEX-8400 supports up to two 7 MHz spectrum/waterfall displays and independent receivers, providing enhanced band visibility. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external interfaces required. The radio delivers advanced band awareness, low phase noise, brick wall filters, and high-quality audio performance to support a wide range of operating styles.
( 2 )
$2,849.00
Ciro Mazzoni Automatic Magnetic Loop Antennas
Ciro Mazzoni Automatic Magnetic Loop Antennas are ideal stealth HOA and small-space loop antennas. They provide exciting new capabilities to limited space operations with unparalleled reliability and dramatically higher power handling compared to other transmitting loops. These are considered to be the best small transmitting loops available in the world! They are constructed with tough, attractive, aircraft grade aluminum. In spite of their compact size, these antennas automatically adjust to resonance throughout a wide band range: the MIDI Loop tunes 80 through 20 meters, the BABY tunes 40 through 10 meters... without any coverage gap! Now, THE STEALTH LOOP adds even more versatility for the Amateur who is shackled by antenna restrictions. Use it on the ground or on a table! Click on the STEALTH below for More Details! For each LOOP Antenna, MIDI, BABY and THE STEALTH LOOP, frequency information is directly transferred from your radio (ICOM, Elecraft, Kenwood, and Yaesu) to the included ATU 2.0 Controller, by RS-232 or Interface Cable. The Loop Antenna tunes automatically to the radio frequency or manual tuning is available with the ATU 2.0 USB Keypad, also included. If you need a very-high quality antenna that is concealable and operates at respectable power over a wide frequency range, then Ciro Mazzoni Automatic Magnetic Loop Antennas are a great choice!
( 49 )
$2,335.99
—
$2,479.99
ACOM 700S Solid State 1.8-54 MHz Linear Amplifiers
ACOM 700S Solid State 1.8-54 MHz Linear Amplifiers are state-of-the art amplifiers that cover all amateur bands from 160 through 6 Meters. These amps provide 700 W output power (PEP SSB or CW modes). Working parameters of the amplifier are indicated on a multi-function, high-resolution 5 inch color display. Amplifier control is accomplished with only six buttons on the front panel or directly by CAT interface from the transceiver or remotely by RS232 interface. ACOM 700S amplifiers are compatible with all transceiver models available on the market. The broadband input matches to the transceiver with low SWR over the entire range of 1.8-54 MHz. Full output operation only requires a maximum of 40 watts drive and the typical "ground on transmit" (PTT) keying with no special signals required. The overall operation of ACOM 700S amplifiers is extremely simplified. Screen menus are intuitive and easy to follow and no special skill is required from the operator when changing frequency bands. The amplifier monitors the frequency of the input signal through the built-in frequency counter and automatically switches bands. A band data or CAT interface connection from the transceiver is NOT required for automatic band changing. These amplifiers take care of themselves during operation, due to the continuously-working protection circuits in all modes. The operator can digitally monitor more than 10 parameters concerning the working conditions of the amplifier. Detailed data (55 parameters) about each of the last 28 hard-fault protection trips is stored in the amplifier's nonvolatile memory. ACOM 700S amplifiers are perfect for DXpeditions and field operation. They are extremely compact and employ light-weight construction thanks to the built-in switching-mode power supply. They operate on an extended mains voltage range** (100-120VAC and 200-240VAC) by changing only the main fuses - no internal switching is required. Please read the SPECIAL NOTE at the end of the specifications. ACOM 700S Solid State HF/6-Meter Amplifiers are among the finest and most modern linear amplifiers available anywhere in the world. These outstanding amplifiers are available from DX Engineering! ACOM 700S Solid State Linear Amplifier Specifications: * Rated output power: 700W PEP SSB or CW * Intermodulation distortion (IMD3): Better than 31dB below rated PEP output * Harmonic and parasitic emissions suppression: Better than 60dB (65dB typical) * Input and output impedances: SO-239 UHF female connectors; 50 ohm unbalanced output; * Input circuit: broadband, SWR below 1.2:1, 1.8 to 54 MHz continuous without retuning or switching * RF power gain: 14dB +/- 1dB * Complies with US Federal Communications Commission (FCC) rules and the EU safety regulations and electromagnetic compatibility standards * Temperature range: 14 degrees F to 104 F (-10 C to +40 C) * Relative humidity: up to 95 percent at 95 F (35 C) * Dimensions (WHD): 12.8 x 5.6 x 14.2 in. (326 x 143x 365 mm) * Weight: 26 lbs. (11.8 kg) **Mains supply voltage: 100-240V, 50-60 Hz, single phase, automatic switching supply; no internal change required for either mains voltage; European style 5x20mm fuses rated for 250VAC for correspond mains: 10A fuses for operation from 200-240VAC, 16À fuses for operation from 100-120VAC. SPECIAL NOTE: Due to power efficiency the use of 240 Vac service is highly recommended. -AOM-700S-240 is pre-wired with NEMA 6-15P USA plug for 240 volt operation. - AOM-700S-120 is pre-wired with NEMA 5-15P for 120 volt operation. - AOM-700S has NO PLUG; order this model to wire your own AC plug for either voltage. * AC load: 1,350VA or less with a power factor of 0.95 or higher * AC load in Low Energy (standby) mode: less than 1VA For additional information, please check the "Documentation" tab.
( 35 )
$4,367.99
FlexRadio 8400MATU HF/6-Meter Signature Series SDR Transceivers
FlexRadio 8400MATU HF/6-Meter Signature Series SDR Transceivers feature an integrated antenna tuner (ATU), and the latest direct sampling SDR technology, paired with a high-resolution display and ergonomic controls. The FLEX-8400M combines all the capabilities of the FLEX-8400 with a stunning 8-inch 1920×1200 IPS WUXGA touchscreen and intuitive controls, delivering high-performance SDR functionality in a traditional radio interface. Unmatched band awareness comes from the integrated display, while support for external monitors at 1900×1200 resolution enhances spectral visibility. The integrated automatic antenna tuner (ATU) is designed to match antennas with up to 3:1 SWR on 80–10 meters and up to 2.5:1 SWR on 160 and 6 meters. Designed with input from top contest and DX operators, the symmetrical and independent dual VFO controls are strategically placed to maximize productivity across all operating styles. Fully self-contained, the transceiver requires no PC, network, or steep learning curve—just plug in and operate. When connected to a PC, laptop, or Mac client, users can access up to two 7 MHz spectrum/waterfall displays and independent receivers, transforming how bands are viewed. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external boxes needed. FlexRadio's industry-leading SmartSDR™ software ensures compatibility across the entire FLEX-8000 Signature Series, enabling continuous software enhancements. With SmartLink™ technology, remote access is simple—just log in from any SmartSDR-compatible client, including an iPhone.
( 2 )
$3,679.08
—
$3,999.00
DX Engineering RT4500HD Rotator/2 Inch HD Mast Clamp and Controller Packages
DX Engineering RT4500HD Rotator/2 Inch HD Mast Clamp and Controller Packages conveniently combine DX Engineering's RT4500HD Rotator with a DXE-RTMC-2A Rotator Top HD Mast Clamp and your choice of either a DXE-RT-21DXE Digital Rotator Controller or microHAM ARCO Advanced Rotator Controller. * Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
Not Yet Reviewed
$3,534.97
—
$4,209.97
RM ITALY BLA600 Solid State Amplifiers
RM ITALY BLA600 Solid State Amplifiers are wideband, compact, automatic linear amplifiers for 160 through 6 meters; 1.8 to 54 MHz. Low input drive requirements (20 to 25W on 80-10 meters, 30-40W for 500W on 160m and 6m) make these amplifiers THE perfect transceiver companion! RM ITALY BLA600 amplifiers are fully automatic 500W solid-state linear amplifiers suitable for seamless integration with all modern transceivers. They utilize the rugged NXP / Freescale MRF6VP5600H 50V power MOSFET for high power and high reliability. These amplifiers are capable of all modern modulation modes. BLA600 amplifiers are fully automatic, featuring instant RF frequency-reading for band changes and fast, reliable and silent PIN diode TX-RX switching, making them ideal for CW QSK operation (separately purchased transceiver to amplifier PTT keying cable is required.) BLA600 amps have three (3) antenna outputs that are easily configurable on a per-band basis as per the user's requirements. Their RF deck is supplied by a heavy-duty linear power supply, with 240 volt AC input* (115-120 or 230 VAC capable) and utilizes an efficient active bridge rectifier with very high-grade filter capacitors to provide the PA devices with a very low noise and robust 50V DC. The amplifier's RF deck has a large heat spreader and copper heat sink which provides a very efficient cooling system. There are separate fans for the RF deck and LPF board / power supply for high duty cycle operation. Internally, all modules are mounted in a very robust and well-screened enclosure. BLA600 amplifiers feature Dual MCU control and an extensive array of protection circuits that look after the amplifier with rapid reaction time. VSWR, I/P Power, I/P Frequency, Three Temperature sensors; Transistor / Heat sink and PSU, Drain voltage / Drain current and HV PIN supply are all continuously monitored. Some thumbnail details: * Employs Freescale MRFE6VP5600 Power FETs * Drive requirements: 20-25W for 500W on 80-10m; 30-40W for 500W on 160m and 6m * Input drive from 1W to maximum of 40W (1 to 25W w/reduced output) * Power Gain: Typical 14dB +/- 1dB (80-10m) * Solid 500W Output on all modes * Dual MCU Control * Fast PIN Diode RX-TX TX-RX switching enables full QSK operation * 2x16 LCD screen for Amplifier Status * Two Separate LED displays; one for power and one for antenna VSWR * Three antenna output connectors, user-configurable * Dual large-diameter MCU controlled multispeed fans for efficient cooling * 1,200W Linear Power Supply- Highly filtered and regulated * Weight: 21.5kg (47.4 lbs.) * Quiet, 240 VAC operation **Requires a user supplied NEMA 6-15P to IEC 320-C13 Cord. (Internally resettable for 230 or 120 VAC input on jumper board under rear access panel secured with T10 torx screws) * AC Input Fuse: 5 x 20mm F LBC 250V; Fast Blow, 240 VAC 5A (included); or 230 VAC 6A (optional) or 115-120 VAC 10A (optional, with NEMA 5-15P to IEC 320-C13 15A Cord.) WARNING: Amplifier is set from the factory for 240VAC operation. Do not use a low amperage PC power supply AC cord. An IEC C-13 14AWG 15A cord is required with NEMA 6-15P for 240VAC or NEMA 5-15P for 120VAC after internal jumpers and fuse have been changed. If your HF transceiver can be set for 20 to 40 watts output, then you will be sending 500 watts to the antenna on ALL bands 160 through 6 meters using this amplifier. The real beauty is that it all happens fully automatically! There is no tuning and no band switching! Give your signal a nice boost. Order the RM ITALY BLA600 Solid State Amplifier from DX Engineering!
( 14 )
$2,519.99
—
$3,086.99
OptiBeam HF Directional Antennas
OptiBeam antenna technology has achieved directional antennas with extraordinary electrical properties, including the highest efficiency, optimum band coverage, nearly constant gain and unchanging radiation pattern across the band, and low SWR. These antennas maintain consistent electrical characteristics under all weather-conditions and include a high power balun with UHF female connector for your 50 Ohm coaxial cable. OptiBeam Antennas are distinguished by their advanced mechanical qualities. Specially configured, stable and properly shaped element holders, robust square and round booms with effective and very solidly-built element transitions are OptiBeam exclusives. They provide advanced physical properties, including proper balance and the highest stability of the entire system. Elements are perfectly aligned and secured against torsion with minimal sag for a visually pleasing appearance. OptiBeam antennas are made for those who understand the true value of investing in proven electrical performance and unequalled mechanical quality for the ultimate in reliability. They are built to withstand the harshest conditions using the very best materials, including high quality aluminum alloys, UV stable synthetic parts and stainless steel hardware. OptiBeam antennas are designed to be easier to build than others, arriving in subassemblies with every part carefully sorted, clearly labeled, and extremely well packed for worry-free shipment and straightforward installation. In 2025, the OptiBeam brand of products was exclusively acquired by WiMo Antennen und Elektronik GmbH. The OptiBeam portfolio is now produced by WiMo and integrated into its product offering. With this acquisition, WiMo will integrate the technical expertise and know-how gained from OptiBeam's many years of experience in antenna technology and will provide new impetus with its extensive service and sales network. The primary goal is to successfully continue OptiBeam's antennas, ensure long-term customer service and spare parts availability, and leverage development potential. For enthusiastic operators of all pursuits, OptiBeam provides the advantage of pure performance. Proven in the field and confirmed by the most demanding hams around the world – choose OptiBeam for your station.
( 5 )
$2,429.99
—
$4,143.99
ACOM 1003 HF + 6 meter Linear Amplifiers
ACOM 1003 HF + 6 meter Linear Amplifiers are self-contained, full-featured units that cover all amateur bands from 1.8 MHz to 54 MHz. With less than 80 watts input, they deliver 1000 watts PEP output or 900 W continuous carrier using a single ceramic/metal power triode 3CX800A7. ACOM 1003 models have two new front panel relay switches, one to select from three antenna outputs and another to quickly engage and disengage an input attenuator for rapid tuning without transceiver adjustment. A multitude of advanced features in this compact and affordable amplifier validates its admirable design. ACOM 1003 Amplifiers are available from DX Engineering in three versions: •AOM-1003-240 Tested with a pre-installed NEMA 6-15P for 240 VAC at 8.5A (10A fuses) •AOM-1003-120 Tested with a pre-installed NEMA 5-15P for 120 VAC at 15A+ (20A fuses) •AOM-1003 Install your own plug, reset voltage taps internally, 10A fuses supplied The ACOM1003 HF+6M Linear Amplifier is amazingly easy to operate! •True Resistance Indicator (TRI) bar scale meter: Simplifies accurate adjustment of plate-load impedance controls. •Two-line OLED Display: Provides a peak power bar graph meter, 18 unique operational parameters and text status messages. •External Tuner Not Needed: For antenna SWR up to 3:1, even at 1000 W output. •Front-panel Input Attenuator: Instantly reduces input power when tuning, eliminating the need for transceiver power adjustments. •Silent HF Reed Relay: Enables Fast T/R switching for QSK CW. Additional features and protection: •Operator selectable class AB2 mode for best linearity in SSB mode or class B for reduced plate dissipation in continuous digital modes. •Operator selectable Full 100% or 50% power output with no efficiency deterioration. •Auto controlled air flow tube cooling. •Continuous monitoring of amplifier parameters and tube protection. •Able to monitor 18 operator-selectable amplifier parameters on the display. •Unique ACOM protection for the bands switch. •Factory tuned input lowpass filters for best linearity and input SWR less than 1.3 in each amateur radio band. -OLED comment display – Two-line OLED display with peak-reading forward-output power bar graph and 18 operator-selectable amplifier parameters on the display. -Three antenna outputs – Three antenna outputs are selectable by a push-button on the front panel. -Less noise in the shack – HF antenna reed relay for a virtually silent, QSK compatible CW operation. -Transceiver-independent – The amplifier operates without special signals from the transceiver - "Ground on TX" (PTT) and 50-80 W RF drive power are sufficient. -Single tube operation – Uses a single ceramic/metal power triode 3CX800A7 in cathode driven, grounded grid configuration. -Tube protection – Continuous monitoring of amplifier parameters and tube protection. -Output RF arc protection – Original ACOM HF arc protection at the output, or at the antenna. -Power supply – Single phase mains power, 90-132 / 180-264 VAC at 50-60 Hz, power consumption at rated output – up to 2000 VA @ 240 VAC. Internal taps for 8 nominal AC mains voltages: 100, 110, 120, 200, 210, 220, 230 & 240VAC, ±10% tolerance), 50-60 Hz, single phase. -Easy maintenance – Non-volatile memory with SIGNATURE records eight of the most recent Serious (Hard Fault) Protection events. -Documentation – The User's Manual is available as a PDF file only. The latest version is available under the Download tab (see above). ACOM creates and distributes its documentation in ENGLISH language only.
( 2 )
$4,899.99
Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters
Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters are digital / conventional FM dual mode repeaters with Dual Receive / Dual Transmit (DTDR) capabilities. Easy Migration… The repeater controller, receiver and transmitter are all packaged into a standard 19 in. rack mount unit for simple replacement of an existing repeater. Existing peripheral devices such as duplexer and amplifier, etc., can continue to be used as-is. DR-2X Features: * Modulation Modes: Conventional FM, 12.5 kHz C4FM Digital (V/D Mode, VFR Mode, DFR Mode) * VHF or UHF operation (cross-band capable) / DRDT * AMS (Automatic Mode Select) automatically recognizes C4FM digital or conventional FM, and the DR-2X re-transmits using the preset communications mode * 3.5 in. full-color touch panel operation * Extremely reliable, high RF output power: 50W/20W/10W * Emergency Operation: Supports auto-switched backup battery * Front panel microphone connector is provided for repeater testing, and as a base station * Built-in monitor speaker with volume control * Full compatibility with existing repeater controllers using the 15-pin I/O * MSRL (Multi-site repeater link) for easy coverage expansion using optional module * New and improved "News Station" feature for easy sharing of voice and text messaging * Enhanced Group Monitor feature for Easy Grouping Set-up (DG-ID, DP-ID) * NOTE: System Fusion is NOT compatible with D-STAR GMSK User-Friendly Setup: The large front panel, color touch screen permits convenient configuration of the transmitter and receiver frequencies, CTCSS tones, squelch, transmit power output and AMS functions. Simply turn the display switch ON and use the touch panel screen to confirm or change settings. Enhanced Group Monitor: Yaesu's Group Monitor feature allows you to track multiple resources quickly by displaying telemetry and signal strength information of other group members that share the same Digital Group Identification number. Optional MSRL (Multi-site Repeater Link): MSRL allows the repeater operator to link multiple repeaters over a Wide-Area-Network (WAN) or Local-Area-Network (LAN) across short or long distances. New and Improved News Station Function: Quickly store and retrieve digital audio and text messages for groups or individual operators that can be accessed on demand, any time of the day (* Requires Optional MSRL module). Other Features: * Internal AC Power Supply * High Stability plus/minus 2.5ppm TCXO included * DSQ (Digital Squelch Code) Signaling feature * CTCSS and DCS Signaling feature * ID Announcement feature * Remote/External Controller Interface * Base Station Operation * Firmware Upgradeable DR-2X Supplied Accessories: * AC Cable * DC Cable for backup battery * PC Connection cable SCU-20 * Rubber feet (4) DR-2X Options: * DTMF Microphone MH-48A6JA * Hand Microphone MH-42C6J * Voice Guide Unit FVS-2 DR-2X partial specifications: * 144 to 148 MHz, 430 to 450 MHz * Channel steps 5 / 6.25 kHz * Emission type F1D, F2D, F3E, F7W * Frequency stability plus/minus 2.5 ppm (-4F to +140F / -20C to +60C) * Antenna impedance 50 ohms * Supply Voltage AC 100 to 240 V * DC 11.7 to 15.8 V, negative ground * Weight: 22.05 lbs. (10 kg) approximately Transmitter: * RF power output 50/20/5 W * Modulation type F1D, F2D, F3E Variable Reactance Modulation * F7W 4FSK (C4FM) Receiver: * Double conversion Superheterodyne * Audio output 4 W (4 ohms, 10 percent THD, 13.8 V; internal speaker) Current consumption: * 1.5 A (Receive) * 13 A (50 W TX, 144 MHz band) * 14 A (50 W TX, 430 MHz band) Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Move your repeaters into the future! Install Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters from DX Engineering.
( 3 )
$2,099.99
—
$2,584.99
DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas
DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas, model DXE-7580FS-VA-3, are specifically designed for the 75/80 meter band. These DX Engineering 68 ft. vertical antennas are serious, FULL SIZE, full performance vertical antennas that will easily slip into any Amateur Radio station's arsenal, while delivering specs that would satisfy most commercial and military users. They are ultra-rugged, quarter-wave verticals that allow you to achieve the strongest possible presence at your power level and be competitive. Every design detail of the DXE-7580FS-VA-3 Heavy Duty Plus Verticals provide for a very stout 80 meter antenna that can stay up with no guying necessary and no worry. A massive 4 in. O.D. thick-wall 6061 aluminum tubing base and an extra-large insulating channel are combined with a patented* heavy duty stainless steel pivoting fixture that is second to none. Engineered for ease of assembly and adjustments, with corrosion-resistant aluminum tubing, stainless steel mounting brackets, and stainless steel hardware, these are very durable and attractive self-supporting antennas. If an extreme wind storm is predicted, one operator can easily lower and raise these antennas safely, due to the simplicity of the included Heavy Duty Pivoting Fixture and optional DXE-VRW-1 Manual Winch. DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas offer full band coverage, with a 2:1 SWR bandwidth of up to 593 kHz, depending on your radial field. Your internal tuner can get the SWR down to 1:1 on any DX frequency for maximum power transfer. DX Engineering 80 Meter Full Size Quarter Wave Heavy Duty Plus Vertical Antennas feature: -- Self-supporting – will withstand steady-state winds in excess of 112 MPH without guying (guying required under extreme wind speed conditions) -- 5 kW SSB and CW rated—unparalleled reliability -- Ultra-rugged construction starts with 4 in. O.D. aircraft-grade heavy wall tubing -- Ultra-wide SWR bandwidth and unbeaten gain -- Highest wind ratings--high strength 6063/6061 tubing manufactured to DX Engineering specifications -- Easy tilt up and down-- Unique fold-over antenna mount features DX Engineering's patented stainless steel Pivoting Fixture, *U.S. Patent Number 8,130,168 -- High power handling and high strength, UV protected EXTREN® insulators -- No rust--100 percent stainless steel tubing clamps and hardware -- Reliability second to none--specially manufactured stainless and aluminum saddle clamps, stainless bolts, and precision machining on each antenna This antenna system requires the installation of a heavy duty mounting pipe set in concrete. Specifically, 3 in. OD high strength galvanized steel tubing with 0.250 in. minimum wall thickness and 7 ft. (84 in.) minimum length, which is available from DX Engineering; part number DXE-VGMT-3CG. A customer supplied 2-1/2 in. Schedule 80 pipe that has an outside diameter of 2.875 in. is also suitable. About 36 in. of the mounting pipe should extend above the concrete. Depth of the mounting hole and amount of concrete is dependent on local soil type, condition and antenna guying. Note: For additional information, please look at the files under the "Documentation" tab. Designed to the highest of standards, DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas are simply the best 80 meter vertical antenna available today.
( 3 )
$2,959.97
Palstar LA-1K HF Amplifier
The Palstar LA-1K 1000W HF Amplifier is a solid-state unit equipped with dual LDMOS transistors (Laterally-Diffused Metal Oxide Semiconductors), providing full output at a nominal 40 to 55 watts input. This amplifier features RF sensing for automatic band changing, so a transceiver band interface cable is not needed. The LA-1K will work with a wide variety of tuners and transceivers. It's custom-designed as the perfect functional match for the very popular Palstar HF-AUTO Auto Tuner. This amplifier has a newly designed gray front panel and has a color TFT touch screen for amplifier display and operation. Palstar LA-1K features three SO-239 (UHF female) antenna output connectors, phono keying and ALC connectors, instant band changing, T/R Vacuum relay, and a "Pure Signal" output. Although not required due to RF sense band changing capability, transceiver interface connectors are also provided on the rear panel. With its built-in 50Vdc, 42A power supply, the LA-1K operates on 120 Vac at 15A or 240 Vac at 10A. The LA-1K far exceeded all FCC testing standards at an FCC-certified laboratory, and it provides exceptionally clean and efficient RF amplification for any HF transceiver or transmitter for all Amateur bands 160 through 6 meters. Palstar LA-1K SPECIFICATIONS: SSB Power: Power levels up to 1000 watts CW Mode: 1000 Watts CW ICAS FM/RTTY: 500 watts AM: 275 watts Frequency Range: 1.8 to 54 MHz Display: Color TFT touch screen Input Drive Level: 45W - 55W (All Bands) Output: 3 x RF SO-239 ALC: Exciter power control Gain: 13dB + or - 1dB (nominal) RF Sensing: Auto Band Switching without Band Data Cable from transceiver RF Output: Vacuum RELAY T/R Switching Power supply: Internal Medical grade AC power: 100-125VAC 15A or 200-250VAC 10A DC supply: 50VDC at 42A Power Devices: 2 x 5600H 600W LDMOS Transistors Auto-Protect: SWR/Short Circuit/Over Temp Cooling: Variable Speed Fans (3 speed) Intermodulation: Low IMD >-35dB Pure signal: Sample at +10dBm (Rear Panel at 1kW output) Chassis: .090 in. - 11 gauge aluminum Top cover: .090 in. – 11 gauge aluminum powdercoated Dimensions: 12.75 in. wide x 6.25 in. high x 16.5 in. deep Shipping weight: 27 lbs. (12.25 kg) Design concept: Full compatibility with the Palstar HF-AUTO Auto Tuner Warranty: Two years
( 13 )
$3,795.99
Icom RC7760 Remote Control Head Units
Icom RC7760 Remote Control Head Units – available here as an identical extra or replacement – work exclusively with the RF Deck of an IC-7760 Transceiver. This separate item is exactly the same Remote Control Head as supplied with the IC-7760, featuring both the 7-inch wide TFT and a 2.4-inch TFT. Functions are accessed and information is displayed exactly as on the Remote Control Head supplied with the IC-7760, including dual speakers for the independent MAIN and SUB receivers. An AC-DC wall supply (BC-267A) is included. For use remotely or as a backup replacement, the Icom RC7760 is available from DX Engineering.
Not Yet Reviewed
$2,189.95