Availability
4 Results Found For "Receive Array"
DX Engineering Receive Eight Circle V3 Complete Array Systems
DX Engineering Receive Eight Circle V3 Complete Array Systems, DXE-R8C-SYS-V3, provide outstanding reception of weak distant signals. This eight-direction switchable array uses a special end-fire/broadside time delay phasing of eight stealthy 8.5 ft. (2.6m) active vertical elements to cover multiple HF Amateur bands. The Eight Circle pattern rejects extraneous signals and noise far better than Beverages and other arrays. With appropriately located elements, the Receive Eight Circle Complete Array System is the ultimate high-performance directional receive antenna for HF Amateur, SWL or AM DXing. –––––– Click or tap the title of a listed item for an Overview with a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.
Not Yet Reviewed
$3,447.34
ICOM IC-R8600 Communications Receivers
ICOM IC-R8600 Communications Receivers represent the Next-Generation in World-Class Receivers! And the next step in SDR evolution! Why a Next-Generation, World-Class Receiver? While ordinary wide band receivers need to have dedicated demodulator circuits for each receive mode, the IC-R8600 utilizes advanced digital processes that demodulate the incoming signals. The IF signal is sent to the A/D converter, resulting in a digital signal, which is then processed by a high-speed FPGA (Field Programmable Gate Array) and DSP to be restored to an analog audio signal. The received signal is processed to be demodulated according to the receive mode, including not only conventional analog communications in CW, AM, SSB, FM, WFM and FSK, but also advanced digital communications such as D-STAR, P25, NXDN, dPMR and DCR. Of course, this is easily achieved by using Software Defined Radio (SDR) technology. Here is some additional Information for ICOM's IC-R8600 Wideband Communications Receiver with Multiple Digital-Mode Decoders: * 10 kHz to 3 GHz general coverage (YES! That's 3.0 GHz!) * Ultra-wide frequency coverage with RSSI (Received Signal Strength Indication) function * Fast moving, real-time spectrum scope and waterfall functions * Large 4.3 in. TFT color touch screen display * Decodes multiple digital protocols, including D-STAR, NXDN™, dPMR™ and APCO P25 * Cellular blocked * I/Q signal output for use with third-party SDR software and/or external decoding * Optional RS-R8600 PC remote control software allows control of all receiver functions * Clear audio quality using FPGA/DSP base architecture with Superheterodyne circuitry * SD card slot for received log, decode log and voice recording * Optional SP-39AD external speaker with integrated receiver power supply Additional features include: * PL-259 Antenna Connector * Type-N Antenna Connector * RCA Antenna Connector (500 ohms- for long wire antennas, etc.) * MUTE Input Jack- Use your R8600 with your favorite transmitter! * 10.7 MHz IF Output Jack * 10 MHz Reference Frequency Input/Output * I/Q Output Jack * Ethernet Connector * S-meter Output Jack * External Speaker Jack * AF/IF Output Jack * ICOM CI-V Remote Control Jack * USB Connector * DC Power Socket * DC IN Jack (12V nominal) * AUX Jack * Ground Terminal Note: Please look at the associated files under the "Documentation" tab for additional product information, including an instruction manual. ICOM's IC-7300 transceiver is renowned for its superior SDR receiver technology. Why not own a communications receiver based on that very same success? Order an ICOM IC-R8600 Communications Receiver for your SWL or Amateur Radio operations!
( 16 )
$2,799.95
—
$3,249.95
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna is a super wideband, high performance beam that covers the frequency range of 14 to 30 MHz. The advantage of this antenna type is the extreme broadband performance with an even gain curve without dips. This makes this antenna suitable not only for amateur radio, but also for commercial services and for demanding SWLs. Through careful calculations and practical optimization, the spacing and lengths of the elements have been chosen to favor the amateur radio bands 20/17/15/12 and 10 meters, creating the Band Optimized Log Periodic Antenna, hence the name "BOLPA". Hundreds of hours optimizing both SWR and performance within the Amateur bands resulted in exceptional mono-band style performance for InnovAntennas BOLPA-10. This antenna provides a uniform gain of approximately 7 dBi over the entire frequency range and a front-to-back ratio over 20 dB on all but 12 meters with an SWR of mostly better than 1.5:1. The boom length of 25.3 ft. (7.7m) is relatively short for an antenna of this type. Since only one 50 ohm feed line is necessary, this broadband antenna is especially well suited for use with modern SDR transceivers that are able to receive on several HF bands simultaneously. This LPDA's double boom is made of 1.75 in. (44 mm) square aluminum, each supporting the alternately arranged elements and provides the support for the bracing in the middle. Both boom tubes serve as feed lines for high power operations on any band with no tuning adjustments necessary. A common mode choke or balun may be used. High quality aircraft grade aluminum, as well as stainless steel parts, means the BOLPA-10 is also designed for adverse weather and high wind speeds of up to 99 mph (160 kph). Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Mill finished for highest levels of accuracy and performance * First-of-kind "Band Optimized" LPDAs by G0KSC InnovAntennas BOLPA-10 technical performance data: * Gain: 6.9 to 7.5 dBi (4.75 to 5.4 dBd) * Gain at 33 ft. (10m) above ground at 14.150 MHz: 11.56 dBi (including ground gain) * Typical F/B: Over 20 dB * Power rating: 5,000 watts (further limited by feedline and connectors) * Feed impedance: 50 ohm, stud connections * Boom length: 25.3 ft. (7.7 m) * Longest element: 42.6 ft. (13 m)
Not Yet Reviewed
$2,190.00
DX Engineering Shielded Control Cable
DX Engineering Shielded Control Cable is a high quality shielded cable that is suitable for indoor or outdoor use. It features nine #24 AWG annealed tinned copper stranded conductors with color coded PVC insulation and aluminum foil shielding, plus a bare #24 AWG stranded tinned copper drain wire. This RoHS compliant cable supports an eight port remote switch with 1-of-8 control lines plus a common ground conductor AND a separate shield conductor. This cable has a thick, durable, chrome-gray PVC jacket. Plus, using a cable that has stranded conductors relieves the worry of breaking one of the conductors; unlike a different type of cable made with solid wire. This shielded control cable is ideal for use with DX Engineering Remote Antenna Switches, Four Square and Phased arrays, and should be considered a great choice for any of your low-current, custom remote switching applications. This cable is excellent for building accessory cable assemblies, RS-232 data cables, switching cables, and for control of low-voltage relays including receiving and transmitting antenna arrays. This cable is not intended for use with rotators or other medium current applications. You may order DX Engineering Shielded Control Cable by the foot in any lengths up to 500 feet and is available in a 1,000 ft. roll. Here are the "specs" on this very useful shielded control cable: Number of stranded conductors: 10 Number of insulated conductors: 9 Insulated conductor AWG (Strands): 24 (7/32) Drain wire AWG (Strands): 24 (7/32) Insulation nominal wall thickness: 0.010 in. Nominal Capacitance (pF/ft.): 30 Jacket nominal wall thickness: .035 in. Nominal outer diameter: 0.240 in. Cable Temperature Range: -20 to 80 degrees C Cable Voltage: 300 V
( 8 )
$2,089.99