Availability
24 Results Found For "in-line"
ROHN 65G Tower Sections
ROHN 65G Tower Sections provide tremendous strength for applications up to the 500 ft. level. These 65G tower sections are constructed with heavy steel tube legs to satisfy a wide variety of needs under various conditions. Each leg features a welded joining plate with four bolt holes to mate to the next section. ROHN also supports their 65G towers with a complete line of quality parts and accessories designed for an exact part-to-part match. ROHN 65G Tower Sections include the standard straight sections that are 10 ft. long. There are also 6520G sections that are 20 ft. in length. Special short sections are available to suit your embedded tower-base needs. These 65G Tower Sections are offered with several different antenna mounting solutions to accommodate various masts, dishes, and other antenna mounting requirements. Towers constructed of ROHN 65G Tower Sections are especially useful in places where unusually high wind loading and height requirements exist. ROHN 65G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! When you require well-engineered tower sections of superior strength for that new tower installation, order ROHN 65G Tower Sections from DX Engineering! Features of all ROHN 65G Tower Sections: * Built on a 24.25 in. equilateral triangle design * High-strength tubular legs joined by ROHN's Zig-Zag bracing crossmembers * Quad-bolted leg joints for extra strength and reliability * Continuous solid-round steel bracing used throughout * Bracing welded directly to tower legs * Each section is shipped with all required nuts and bolts * Completely hot-dip galvanized after fabrication
Not Yet Reviewed
$2,024.99
LAZTuner Classic LT-4 High Performance 4000W Antenna Tuners
LAZTuner Classic LT-4 High Performance 4000W Antenna Tuners, made in France, are premium, high-quality devices that stand out not only for their excellent performance but also for their elegant design. The LT-4 series is produced in small batches with meticulous attention to detail. An impressive front panel, made of anodized aluminum, houses all the controls needed for a simple and convenient tuning process. Large, precise tuning knobs with scales, and two analog display instruments for emitted and reflected power, dominate the appearance, making it a highlight in any shack. The CLASSIC LT-4 offers outstanding tuning accuracy and flexibility, allowing you to use a wide range of antennas with its wide 20 - 1200-ohm impedance range. The tuning displays for transmitted and reflected power can be switched between three ranges (40W, 400W, and 4000W). Its robust construction and use of high-quality materials ensure durability and reliability. The LT-Classic 4 is not just an antenna tuner; it is a testament to the dedication and passion for high-quality radio equipment. With its handcrafted build, superior components, and high-performance functionality, they stand out as the top choice for Amateur Radio operators who demand only the best.
( 2 )
$3,319.99
Manufacturer Rebate
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 3 )
$3,999.95
ACOM 1000 HF + 6 Meter Linear Amplifiers
ACOM 1000 HF + 6 Meter Linear Amplifiers are the world's best value in an Amateur HF amplifier. These amps provide you a comfortable 1,000 watts output on all amateur bands from 160 through 6 meters. The plate-load True Resistance Indicator (TRI) is a powerful tuning aid which helps the operator to quickly and precisely match antennas. The auto-operate function (when enabled) maintains the amplifier in OPERATE mode for you, saving on manual operations. Broadband input matches to the transceiver over the entire range of 1.8-54 MHz. ACOM 1000 amplifiers are both user-friendly and look after themselves. They are designed to safely withstand up to 300 watts reflected power, drive spikes of up to 100 milliseconds duration, drive RF "tails" after a PTT or KEY release and the operator's inadvertent tuning errors. They also withstand a "soft" AC line and will deliver more than half power at only 75 percent of nominal mains voltage. They can withstand voltage drops for up to 10 milliseconds, and up to 15 percent higher line-voltage spikes. These details are all important, particularly when used at Field Day, on DXpeditions and other portable operations. Be sure to read the SPECIAL Note, below. An ACOM 4CX800A high-performance ceramic/metal tetrode with plate dissipation of 800 watts is employed. On-board processing provides permanent monitoring and protection of plate and grid voltages and currents, as well as the exhaust temperature. Text messages, 12 different parameters, and strip peak-reading PEP meter are displayed on a dot-matrix, back-lighted LCD. LED indicators are provided for OPERATE, attenuator-on, and ON/OFF conditions. Records of the amplifier internal status are stored in nonvolatile memory for the seven most-recent auto-protection trips. This information is very valuable should diagnostics be needed. The input bypassing and the vacuum antenna relays are very quiet even in CW mode due to their special mounting. This results in virtually noise-free QSK! ACOM-1000 details: * Frequency Coverage: 1.8-54 MHz * Power Output: 1,000W PEP or continuous carrier; for continuous carrier transmissions longer than 15 minutes the external auxiliary fan must be installed * Intermodulation Distortion: Better than 35dB below rated output * Hum and noise: Better than 40dB below rated output * Harmonic Output Suppression: 1.8-29.7 MHz; 50dB below rated output, 50-54 MHz; 66dB below rated output * Input and Output Impedances: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-54 MHz; Bypass path: VSWR less than 1.1:1, 1.8-54 MHz continuously * RF Gain: 12.5dB typically, frequency response less than 1dB (50-60W drive power for rated output) * Primary Power: 170-264V (200, 210, 220, 230 and 240V nominal taps), 50-60Hz, single phase, 2200VA consumption at rated output. 230 or 240 volts recommended for USA * SPECIAL Note: Order part number AOM-1000 to wire the AC plug and voltage selection yourself; order part number AOM-1000-240 for pre-wired 240 volt operation or part number AOM-1000-120 for pre-wired 120 volt operation * Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations * Size: 16.6 x 14 x 7.2 in. * Weight 58.5 lbs. * Operating environments: Temperature range 32 to 122 degrees F, Humidity up to 95 percent at 95 F * Altitude: up to 3,000m (10,000 ft.) above sea level without output deterioration Note: For additional information, please look at the files under the "Documentation" tab. ACOM says that these are the "world's best value" in an Amateur HF amplifier. Order one of these ACOM 1000 HF + 6M Linear Amplifiers from DX Engineering and decide for yourself! Note: During and after your amplifier's warranty period, DX Engineering will provide service and repair for ACOM amplifiers. A repair fee will be charged for services outside the warranty period.
( 47 )
$4,364.99
ACOM 1010 HF Linear Amplifiers
ACOM 1010 HF Linear Amplifiers cover all bands from 1.8 through 29.7 MHz. They provide over 700 W PEP output (or 500 W continuous-modes) with less than 60 watts of drive and operate without special transceiver signaling; they need only "ground on TX" and the required drive. ACOM's exclusive True Resistance Indicator (TRI); enables faster antenna changes and use over wider frequency ranges. Also, a built-in antenna selector switch with two outputs is included to provide instant choice of antennas. Antenna matching can be achieved in less than 10 seconds and at a quarter of nominal output power, which results in lower risk of interference to other stations and greater safety to the amplifier components. A single ACOM 4CX800A high-performance ceramic-metal tetrode with plate dissipation of 800 watts is used for maximum efficiency. These amplifiers are self-monitoring. They are designed to safely withstand up to 240 watts of reflected power, up to 100 milliseconds of drive spikes (RF "tails" after a PTT or KEY release), and even operator tuning errors. They are also capable of operating at more than half their designed output at only 75 percent of nominal line voltage. Because they can tolerate deep voltage drops and 15 percent line voltage spikes, they are particularly well-suited for use in portable environments, such as Field Day and DXpeditions. Importantly, a variety of system parameters are continuously monitored and available to the operator to assure safe and efficient amplifier operation. Design of the high-voltage power supply eliminates the danger of turn-on transients affecting sensitive devices connected to the same line (mains) circuit. Moreover, the amplifier can be configured to accommodate any of eight nominal line voltages between 100 and 240 V, 50 or 60 Hz. Please see the SPECIAL Note, below. ACOM 1010 specifications: * Frequency Coverage: All amateur bands in the 1.8-29.7MHz frequency range * Power Output: 700 W PEP or 500 W continuous modes. * Intermodulation Distortion: Better than 35 dB below rated output. * Hum and noise: Better than 40 dB below rated output. * Harmonic Output Suppression: Better than 50 dB below rated output. * Input and Output Impedance: Output: 50 Ohm unbalanced, SO-239 connectors; Input circuit: broadband, VSWR less than 1.3:1, 1.8-30 MHz continuously (no tuning, no switching); Bypass path: VSWR less than 1.1:1, 1.8-30 MHz continuously, 200 W maximum * RF Gain: 11dB, frequency response less than 1dB (50 to 70 W drive for rated output) * AC Power: 85-132 V/170-264 V ac (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps, plus 10 percent to minus 15 percent tolerance), 50-60 Hz, single phase, 1,200 VA * SPECIAL Note: Order part number AOM-1010 to wire your AC plug after removing European plug yourself; order part number AOM-1010-240 for pre-wired 240 volt operation (NEMA 6-15P) or part number AOM-1010-120 for pre-wired 120 volt operation (NEMA 5-15P). * Operating environments: Temperature range; 32 to 122 degrees F, Humidity; up to 95 percent at 95 degrees F, Altitude; up to 10,000 above sea level without output deterioration. * Complies with FCC-regulations as well as CE safety and electromagnetic compatibility requirements * Dimensions, (in.) 15.83 W x 12.4 D x 6.5 H * Weight: 39.7 lbs. Note: For additional information, please look at the files under the "Documentation" tab. Get one of these highly-advanced HF amplifiers for your shack. Order an ACOM 1010 HF Linear Amplifier from DX Engineering… today! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.
( 53 )
$3,376.99
DX Engineering Skyhawk Tri-Band Yagi Antennas
DX Engineering Skyhawk™ Tri-Band Yagi Antennas are the choice of experienced DXers, especially if your interest is HF contesting. DX Engineering Skyhawk™ antennas provide the highest payback in performance and operating pleasure compared to any other single component in your station. The only better antenna choice is to combine one of our DX Engineering Skylark™ Dual-Band Yagi Antennas with the Skyhawk™! These well-designed, single-tower systems offer outstanding performance without the headaches of maintaining more substantial antenna farms. DX Engineering Skyhawk™ antennas reflect the latest computer-optimized design for maximum gain and bandwidth. They are built from the finest materials utilizing heavy-duty aluminum and all stainless steel hardware. Skyhawk™ operates from a single feed line and has a 90 mph wind survival rating! Have you ever had to replace a rotor in February? Skyhawk™ antennas offer minimal wind-loading for their size and are torque-balanced to reduce wear and tear on your rotor. Assembly is easy, as tower top adjustments have been eliminated and the elements are truly locked in place. DX Engineering Skyhawk™ features include: * 90 MPH wind survival rating * EZ-mount system for attaching antenna to mast * All parts de-burred * Stainless steel pop-riveted element locking * No user adjustment - just assemble it and put it up Additional specifications include: 20 meters: * Three elements * Effective boom length: 23 ft. * VSWR: less than 1.4:1 between 14.0 and 14.35 MHz, measured at feed-point * Front to back: >20 dB across the entire band * F/B peaks at 14.150 MHz at 21 dB * Gain: better than 7 dBi across band * 7.4 dBi gain at 14.350 MHz * Front lobe beam width (-3dB points) 63 degrees 15 meters: * Three elements * Effective boom length: 15 ft., 6 in. * VSWR: less than 1.5:1 between 21.0 and 21.45 MHz, measured at feed-point * Front to back: >16 dB across the entire band * F/B peaks at 21.350 at 24.5 dB * Gain: better than 7 dBi across band * 7.6 dBi gain at 21.45 MHz * Front lobe beam width (-3dB points) 56 degrees 10 meters: * Four elements * Effective boom length: 16 ft., 9 in. * VSWR: less than 1.5:1 between 28.0 and 28.9 MHz, measured at feed-point * Front to back: >14 dB across the entire band * F/B peaks at 28.5 at 21 dB * Gain: better than 7.7 dBi across band * 9.2 dBi gain at 28.9 MHz * Front lobe beam width (-3dB points) 47 degrees Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. So, what are you waiting for? Get a DX Engineering Skyhawk™ Tri-Band Yagi atop your tower, hook up your coax, and start working some serious DX! You've always heard about DX Engineering quality. DX Engineering Skyhawk™ Tri-Band Yagi Antennas are available now. Order yours today and enjoy great DXing with quality and value!
( 3 )
$2,378.97
SSB Electronic Mast-Mount Preamplifiers
SSB Electronic Mast-Mount Preamplifiers are low-noise, band-specific, weatherproof preamplifiers designed for installation near VHF and UHF antennas. Available for the 6 meter, 4 meter (Europe), 2 meter and 70 cm Amateur bands, these preamplifiers are installed in-line, at the antenna. They improve receive performance by amplifying weak signals before feedline loss can reduce them. Powering and Sequencing Most models can be powered remotely through the coaxial cable, and many modern transceivers include a built-in bias-tee for mast-mounted preamplifiers. If the transceiver or transverter system does not provide power, an external bias-tee or remote-feed unit is required. • The DCW-15 and DCW 2004B provide sequencing support. • The DCC-12 does not provide sequencing. • SP series preamplifiers include a built-in RF VOX circuit for safe operations up to 100 watts; for transmit power above 100 watts, PTT control with a sequencer is required. Some models require a direct DC connection (UHF female). • -S series preamplifiers feature lower current signal relays with slightly higher insertion loss. • MHP and MHP-S series preamplifiers versions require sequencer control (see below). Signal Filtering and Switching Built-in helix filters effectively reject out-of-band signals, helping maintain clean receive performance. Real coaxial relays handle transmit/receive switching, resulting in very low insertion loss (except for SP-S series). And each amplifier is carefully calibrated at multiple test stations before packaging. Dual-Band Models Dual-band models include built-in diplexers, so they require only one connection for the multiband antenna and one connection for the station coaxial cable. MHP Series for Demanding Stations The MHP series is designed for demanding operating environments and provides higher gain for weak-signal modes such as Tropo-DX and EME. With maximum transmit power handling of 1500 watts on 6m and 2000 watts on 2m and 70cm, these preamplifiers are well suited for contesting, DX, and EME operation. Important Note for MHP Models Bias-tee power (on the RF coax) is not supported in most MHP Preamplifiers. They must be powered directly using the appropriate cable size for the required distance, and they may only be operated with a correctly wired sequencer, such as the DCW 2004 B Sequence Controller. Transmitting high power without a directly wired sequencer is likely to damage the MHP preamplifier. Housing and Hardware All SSB Electronic Mast-Mount Preamplifiers are supplied in UV-resistant, weatherproof housings with Type N female connectors. Hot-dip galvanized clamps and stainless steel mounting hardware are included. See individual models for band coverage and detailed specifications.
Not Yet Reviewed
$2,636.99
—
$2,888.99
InnovAntennas DXR Series Multi-Band HF Beams
InnovAntennas DXR Series Multi-Band HF Beams have short booms with full-size elements or capacity-loaded shortened elements, all with excellent performance, making them very popular internationally. The DXR Series interlaced-element antennas, optimized by G0KSC over a long period of time, achieve the best possible balance between compact size and performance. For the DXR Series Multi-band Yagis, equal attention was paid to a very solid construction and sufficiently small component and packaging size, to keep shipping costs within reasonable limits. Click on any model listed for specific details and specifications. InnovAntennas DXR Series Multi-Band HF Beams are available exclusively from DX Engineering in North America. Important features of InnovAntennas DXR Series Multi-Band HF Beams: * No traps, matching links, or hairpins * Only one feed line for all bands * Careful selection of materials without regard to cost * Very robust construction with still manageable package size The DXR Series beams use a 1.97 x 1.97 in. (50 x 50 mm) square boom with 0.078 in. (2 mm) wall thickness. A square boom has the advantage that the elements cannot twist in the plane. On the other hand, it is slightly heavier than a round boom of the same stiffness. The DXR Yagis do not require any bracing of the boom. The longest elements are 1.378 in. (35 mm) diameter in the middle and taper relatively quickly to achieve a good compromise between weight and strength. This construction also helps to avoid constant vibration even in light winds. With these multi-band Yagis, care has been taken to ensure that there are never more than the elements of three bands nested within each other. This is because each additional element for one band can cause interference on another band. This negative effect was avoided by careful manual optimization. The result is the best possible matching over a wider band range than other antenna designs. In most cases, no tuner is necessary; the SWR minimum can be precisely set by adjusting the element lengths. Due to the robust construction and the absence of moving or electrically active components such as coils, traps, hairpins, etc., an InnovAntennas DXR beam is maintenance-free for many years. The insulators are UV-resistant and designed for a wide temperature range. The mounting hardware uses sea-water resistant stainless steel and the aluminum is type T6 6066/6082, which is also used in aviation. It is nice not to have to climb the mast every year to maintain the antenna. The DXR Series Multiband beams are designed to require only one feed line. This makes installation on a mast with a rotor very easy. And the use of modern SDR transceivers, which allow the observation of several bands at the same time, becomes really useful. The one feed line is connected directly to the solid distribution rails of the fed elements. By avoiding baluns, matching elements, traps, or hairpins for tuning, transmit power is only limited by the coaxial cable and connectors. Note: Front-to-back ratio (F/B) and SWR bandwidth data for the DXR Series will be added as it becomes available. Many models of the DXR Series are available as a "super-compact" version, on which the longest elements have been shortened with capacity hats, thus reducing their turning radius considerably. The installation of these impressive antennas is possible even where space is limited.
( 4 )
$2,097.99
InnovAntennas 13 Element HF Log Periodic Dipole Arrays
InnovAntennas 13 Element HF Log Periodic Dipole Arrays provide super wideband, high performance from 10 to 54 MHz. InnovAntennas LPDA's are designed using the very latest computer optimization techniques such as Dense Element Log Periodic Dipole Array (DELPA). This type of antenna was designed with specifications for a broadcasting center. Example photos display the DELPA-13 installed at the broadcast center. If you are looking for the best of the best from both a performance and mechanical construction perspective, then look no further than InnovAntennas LPDA! You have come to the right place! The DELPA-13 has 13 elements placed above the 37.73 ft. (11.5 m) by 3 in. (76mm) square boom, from which all elements are insulated. The feed point is 200 ohm and includes a 20 kW 4:1 balun. Feed line between the elements is silver plated hard-drawn copper wire spaced to produce a 300 ohm balanced-line feed. The DELPA-13 provides excellent, consistent results for the frequency range it covers with a relatively limited number of elements. Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Silver plated balanced line feed * Mill finished for highest levels of accuracy and performance Performance specifications of InnovAntennas 13 Element HF Log Periodic Dipole Array DELPA-13: * Typical forward gain: 6dBi * Typical F/B: 15dB * Gain at 33 ft. (10 m) above ground: 10dBi * Power rating: 15 kw+ (further limited by feedline and connectors) * Feed impedance: 50 Ohm * Boom length: 37.73 ft. (11.5 m) * Weight: 165.35 lbs. (75 kg) * Turning radius: 20.67 ft. (6.3 m) * Wind loading: Upon application * Wind survival: 100 mph (160 kph)
Not Yet Reviewed
$4,100.00
ACOM 1003 HF + 6 meter Linear Amplifiers
ACOM 1003 HF + 6 meter Linear Amplifiers are self-contained, full-featured units that cover all amateur bands from 1.8 MHz to 54 MHz. With less than 80 watts input, they deliver 1000 watts PEP output or 900 W continuous carrier using a single ceramic/metal power triode 3CX800A7. ACOM 1003 models have two new front panel relay switches, one to select from three antenna outputs and another to quickly engage and disengage an input attenuator for rapid tuning without transceiver adjustment. A multitude of advanced features in this compact and affordable amplifier validates its admirable design. ACOM 1003 Amplifiers are available from DX Engineering in three versions: •AOM-1003-240 Tested with a pre-installed NEMA 6-15P for 240 VAC at 8.5A (10A fuses) •AOM-1003-120 Tested with a pre-installed NEMA 5-15P for 120 VAC at 15A+ (20A fuses) •AOM-1003 Install your own plug, reset voltage taps internally, 10A fuses supplied The ACOM1003 HF+6M Linear Amplifier is amazingly easy to operate! •True Resistance Indicator (TRI) bar scale meter: Simplifies accurate adjustment of plate-load impedance controls. •Two-line OLED Display: Provides a peak power bar graph meter, 18 unique operational parameters and text status messages. •External Tuner Not Needed: For antenna SWR up to 3:1, even at 1000 W output. •Front-panel Input Attenuator: Instantly reduces input power when tuning, eliminating the need for transceiver power adjustments. •Silent HF Reed Relay: Enables Fast T/R switching for QSK CW. Additional features and protection: •Operator selectable class AB2 mode for best linearity in SSB mode or class B for reduced plate dissipation in continuous digital modes. •Operator selectable Full 100% or 50% power output with no efficiency deterioration. •Auto controlled air flow tube cooling. •Continuous monitoring of amplifier parameters and tube protection. •Able to monitor 18 operator-selectable amplifier parameters on the display. •Unique ACOM protection for the bands switch. •Factory tuned input lowpass filters for best linearity and input SWR less than 1.3 in each amateur radio band. -OLED comment display – Two-line OLED display with peak-reading forward-output power bar graph and 18 operator-selectable amplifier parameters on the display. -Three antenna outputs – Three antenna outputs are selectable by a push-button on the front panel. -Less noise in the shack – HF antenna reed relay for a virtually silent, QSK compatible CW operation. -Transceiver-independent – The amplifier operates without special signals from the transceiver - "Ground on TX" (PTT) and 50-80 W RF drive power are sufficient. -Single tube operation – Uses a single ceramic/metal power triode 3CX800A7 in cathode driven, grounded grid configuration. -Tube protection – Continuous monitoring of amplifier parameters and tube protection. -Output RF arc protection – Original ACOM HF arc protection at the output, or at the antenna. -Power supply – Single phase mains power, 90-132 / 180-264 VAC at 50-60 Hz, power consumption at rated output – up to 2000 VA @ 240 VAC. Internal taps for 8 nominal AC mains voltages: 100, 110, 120, 200, 210, 220, 230 & 240VAC, ±10% tolerance), 50-60 Hz, single phase. -Easy maintenance – Non-volatile memory with SIGNATURE records eight of the most recent Serious (Hard Fault) Protection events. -Documentation – The User's Manual is available as a PDF file only. The latest version is available under the Download tab (see above). ACOM creates and distributes its documentation in ENGLISH language only.
( 2 )
$4,899.99
Momobeam TRI10 Multiband HF Yagi Antennas
Momobeam TRI10 Multiband HF Yagi Antennas are a widely favored, medium sized triband Yagi antenna system that delivers impressive performance at an attractive price point. Covering the 20, 15, and 10 meter bands through a single coaxial feed line, these antennas offer a fully optimized element configuration for each band. On 20 and 15 meters, they feature three full size elements—reflector, driver, and director—while the 10 meter band incorporates four elements arranged as a reflector, driver, and two directors for enhanced gain and directivity. Engineered for convenience, TRI10 Yagi antennas require no calibration or band specific adjustments; during assembly, there is no need to choose between CW and SSB segments. They provide flat SWR below 1.5:1 across all operating bands, making them perfectly suited for modern transceivers and high power linear amplifiers. Each TRI10 is supplied with an assembly tool and spare parts, including bolts and aluminum tubing, ensuring operators have everything needed for smooth installation. The high quality 3kW RF choke balun—often an extra cost option with other manufacturers—is included as standard to ensure efficient, trouble free operation. Built on a robust square boom, these antennas offer long term stability, precise element alignment, and a clean, professional appearance. All hardware ships in clearly labeled bags, and every aluminum tube is individually marked, making assembly simple, intuitive, and fast.
Not Yet Reviewed
$2,230.99
EAntenna HF Rotatable Antennas
EAntenna HF Rotatable Antennas include a comprehensive range of mono-band and multi-band Yagi beams and rotatable Delta Loops and Dipoles. Find the band coverage and performance antenna of your dreams right here. For example, the exciting EAntenna 59+ provides great performance on 20, 17, 15, 12 and 10 meters! Check out the specs on this great line of HF directional antennas. DX Engineering offers EAntenna because their attention to manufacturing detail is excellent! Their Yagi, log periodic, and rotatable dipole antennas are built with high-quality stainless steel hardware and aircraft-grade aluminum. As you look through these selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce every one of the EAntenna premier HF beam antennas and state-of-the-art VHF and UHF Yagi antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 mph wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus, we can ship these great antennas internationally! When you're making plans for a new antenna at your station, look no further for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version.
( 47 )
$2,215.99
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna is a super wideband, high performance beam that covers the frequency range of 14 to 30 MHz. The advantage of this antenna type is the extreme broadband performance with an even gain curve without dips. This makes this antenna suitable not only for amateur radio, but also for commercial services and for demanding SWLs. Through careful calculations and practical optimization, the spacing and lengths of the elements have been chosen to favor the amateur radio bands 20/17/15/12 and 10 meters, creating the Band Optimized Log Periodic Antenna, hence the name "BOLPA". Hundreds of hours optimizing both SWR and performance within the Amateur bands resulted in exceptional mono-band style performance for InnovAntennas BOLPA-10. This antenna provides a uniform gain of approximately 7 dBi over the entire frequency range and a front-to-back ratio over 20 dB on all but 12 meters with an SWR of mostly better than 1.5:1. The boom length of 25.3 ft. (7.7m) is relatively short for an antenna of this type. Since only one 50 ohm feed line is necessary, this broadband antenna is especially well suited for use with modern SDR transceivers that are able to receive on several HF bands simultaneously. This LPDA's double boom is made of 1.75 in. (44 mm) square aluminum, each supporting the alternately arranged elements and provides the support for the bracing in the middle. Both boom tubes serve as feed lines for high power operations on any band with no tuning adjustments necessary. A common mode choke or balun may be used. High quality aircraft grade aluminum, as well as stainless steel parts, means the BOLPA-10 is also designed for adverse weather and high wind speeds of up to 99 mph (160 kph). Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Mill finished for highest levels of accuracy and performance * First-of-kind "Band Optimized" LPDAs by G0KSC InnovAntennas BOLPA-10 technical performance data: * Gain: 6.9 to 7.5 dBi (4.75 to 5.4 dBd) * Gain at 33 ft. (10m) above ground at 14.150 MHz: 11.56 dBi (including ground gain) * Typical F/B: Over 20 dB * Power rating: 5,000 watts (further limited by feedline and connectors) * Feed impedance: 50 ohm, stud connections * Boom length: 25.3 ft. (7.7 m) * Longest element: 42.6 ft. (13 m)
Not Yet Reviewed
$2,190.00
Momobeam DUO8 15/20 SF Dual Band HF Yagi Antennas
Momobeam DUO8 15/20 SF Dual Band HF Yagi Antennas are a single, separately fed dual-band full size antenna designed for the 14MHz (20m) and 21MHz (15m) amateur bands. With independent SO-239 feed lines connectors for each band, it enables simultaneous operation by two transceivers—without the need for expensive diplexers. Perfect for multi-operator contesting, the DUO8 15/20 SF eliminates the need for additional towers. Simply pair it with high-quality bandpass filters and you're ready to go. Enjoy true monoband performance from a single dual-band antenna. Assembly is simple and intuitive. The DUO8 15/20 SF uses a square boom, and all hardware is packaged in clearly labeled bags. Each aluminum tube is also labeled to ensure a quick and hassle-free setup.
Not Yet Reviewed
$3,245.99
Momobeam TRI9 30/17/12 Meter Full-Size Yagi Antennas
Momobeam TRI9 30/17/12 Meter Full-Size Yagi Antennas are the perfect choice for operators who appreciate the unique characteristics of the WARC bands. These antennas offer medium overall dimensions while maintaining full size elements across all three bands, ensuring optimal efficiency and strong on air results. The design features four elements on 24 MHz, three elements on 18 MHz, and two elements on 10 MHz, delivering excellent gain, bandwidth, and pattern control on each band. Engineered for consistent, high quality performance, TRI9 30/17/12 antennas provide a flat SWR curve with values under 1.5:1 across all three WARC bands without requiring additional tuning. Their electrical performance allows operators to break through demanding pileups with confidence, giving the station a significant advantage during DX openings and rare entity activations. Each TRI9 30/17/12 antenna includes an assembly tool and spare parts such as bolts and an aluminum tube, offering convenience and long term serviceability. A high quality 3kW RF choke balun is supplied as standard—a premium component that many manufacturers offer only as an extra-cost option. This balun helps maintain clean RF behavior, reducing unwanted feed line currents and improving overall system performance. Assembly is designed to be simple, fast, and intuitive. The antennas use a square boom structure, and all hardware arrives in individually labeled bags. Every aluminum tube is clearly marked to ensure accurate placement, making the installation process smooth and error free even for first time builders. Requiring a medium to heavy duty rotator, the TRI9 30/17/12 Meter Yagi Antennas combine mechanical strength, refined electrical engineering, and user friendly assembly. They deliver outstanding performance for WARC enthusiasts who want powerful, dependable antennas without excessive footprint or complexity.
Not Yet Reviewed
$3,609.99
Momobeam TRI16-BT 20/15/10 Meter Yagi Antennas
Momobeam TRI16 BT 20/15/10 Meter Yagi Antennas are high performance tri band antenna systems engineered specifically for installation on large towers and demanding station environments. Designed for operators who require exceptional gain, pattern control, and mechanical durability, these antennas deliver powerful, consistent results across the 20, 15, and 10 meter bands. TRI16 BT antennas are truly unique. The generous spacing between the elements around the boom to mast plate allows installation on towers with sides up to 70 inches per side. Built on a 38 foot boom, each antenna features a total of sixteen elements: four elements on 20 meters (reflector, driver, and two directors), five elements on 15 meters (reflector, driver, and three directors), and seven elements on 10 meters (reflector, driver, and five directors). This aggressive element configuration delivers outstanding forward gain and strong rejection performance across all bands. Each TRI16 BT antenna includes an assembly tool and spare hardware such as bolts and an aluminum replacement tube. A high quality 3kW RF choke balun is also included as standard—an important advantage, as many manufacturers offer similar components only as optional extras. This premium balun ensures proper feed line isolation and cleaner RF behavior for high power operation. Assembly is designed to be straightforward and intuitive. The antennas use a square boom structure for strength and reliability, and all hardware is packaged in individually labeled bags. Each aluminum tube is clearly marked for quick identification, ensuring a smooth, error free installation process even on complex large tower projects. TRI16 BT antennas require only a single coaxial cable and a medium to heavy duty rotator to support their robust mechanical build. With their combination of advanced engineering, substantial element count, and tower friendly design, these antennas provide exceptional performance for serious Amateur Radio operators who demand the very best from their tri band Yagi systems.
Not Yet Reviewed
$4,572.99
DX Engineering Shielded Control Cable
DX Engineering Shielded Control Cable is a high quality shielded cable that is suitable for indoor or outdoor use. It features nine #24 AWG annealed tinned copper stranded conductors with color coded PVC insulation and aluminum foil shielding, plus a bare #24 AWG stranded tinned copper drain wire. This RoHS compliant cable supports an eight port remote switch with 1-of-8 control lines plus a common ground conductor AND a separate shield conductor. This cable has a thick, durable, chrome-gray PVC jacket. Plus, using a cable that has stranded conductors relieves the worry of breaking one of the conductors; unlike a different type of cable made with solid wire. This shielded control cable is ideal for use with DX Engineering Remote Antenna Switches, Four Square and Phased arrays, and should be considered a great choice for any of your low-current, custom remote switching applications. This cable is excellent for building accessory cable assemblies, RS-232 data cables, switching cables, and for control of low-voltage relays including receiving and transmitting antenna arrays. This cable is not intended for use with rotators or other medium current applications. You may order DX Engineering Shielded Control Cable by the foot in any lengths up to 500 feet and is available in a 1,000 ft. roll. Here are the "specs" on this very useful shielded control cable: Number of stranded conductors: 10 Number of insulated conductors: 9 Insulated conductor AWG (Strands): 24 (7/32) Drain wire AWG (Strands): 24 (7/32) Insulation nominal wall thickness: 0.010 in. Nominal Capacitance (pF/ft.): 30 Jacket nominal wall thickness: .035 in. Nominal outer diameter: 0.240 in. Cable Temperature Range: -20 to 80 degrees C Cable Voltage: 300 V
( 8 )
$2,089.99
Momobeam TRI9-SF Separate Feed 20/15/10 Meter Yagi Antennas
Momobeam TRI9 SF Separate Feed 20/15/10 Meter Yagi Antennas are an ideal solution for operators seeking high performance tri band antennas with independent feed points. Each band is equipped with a full three element configuration—reflector, driver, and director—providing excellent gain, pattern control, and operating efficiency across 20, 15, and 10 meters. These antennas deliver balanced, consistent performance that appeals to both contesters and demanding DX enthusiasts. TRI9 SF antennas are perfectly suited for expanding contest stations and multi operator environments. Their separate feed architecture allows three operators to transmit simultaneously, each using a dedicated band, effectively functioning as if three individual monoband antennas were installed. When paired with appropriate band pass filters to protect equipment, this setup significantly optimizes tower space and reduces the complexity normally associated with multi band installations. This separate feed approach brings several key advantages to station design: fewer antennas are required overall, wind load on the tower is reduced, no external diplexer or triplexer is needed, and multi antenna or multi band stacking becomes simple to configure if desired. The result is a cleaner, more efficient station layout with improved upgrade potential for competitive operating. Each TRI9 SF antenna includes a complete accessory package, featuring an assembly tool and spare parts such as bolts and a pair of aluminum tubes. Three high quality 3kW RF choke baluns are supplied as standard—valuable components that many antenna manufacturers offer only as optional add-ons. Their inclusion ensures excellent feed line isolation and cleaner operating conditions across all three bands. Assembly is straightforward and intuitive. The antennas use a square boom design, and all hardware is organized in individually labeled bags, with each aluminum tube clearly marked for quick identification. This thoughtful packaging makes installation fast, accurate, and stress free, even for operators assembling complex multi antenna systems. TRI9 SF antennas require three coaxial cables and a medium load rotator for proper operation. With their combination of robust engineering, multi transceiver capability, and space efficient design, these antennas offer a powerful solution for serious Amateur Radio operators looking to enhance their contesting capabilities with minimal tower real estate.
Not Yet Reviewed
$2,762.99
Hustler HX6-14448 Extreme Duty 2-Meter Base Antennas
Whoa… check out these Hustler HX6-14448 Extreme Duty 2-Meter Base Antennas! These antennas will handle 600 watts of continuous power with a 1.5:1 or better SWR across all 4 MHz! With 6-dBd gain- that's 8.1-dBi gain- you're going to have TERRIFIC ERP! Top that with 140 mph wind survival; 19.5 foot one-piece heavy fiberglass radome, up to 3.25 inch mast mounting, brass radiators with internal feed lines of copper, and direct DC grounding for lightning protection and you've got yourself some super durable antennas! These are most typically installed as a radio club repeater antennas; true mountain toppers. But for the discerning ham who wants the ultimate 2-Meter Base Vertical, one so ruggedly built that it will last a very, very long time, grab one of these Hustler HX6-14448 Extreme Duty 2-Meter Base Antennas from DX Engineering!
( 1 )
$2,599.99
American Beauty Resistance Soldering Systems
American Beauty Resistance Soldering Systems offer the most advanced and complete line of resistance soldering systems available anywhere in the world. You'll find power ratings between 100 and 3,000 watts, and various tool styles and compositions. You may use them to work on anything from tiny hobby/craft projects to soldering large copper plumbing. Here are just a few of the advantages: The concentrated heat reduces soldering time by many times over. Poor solder joints are often the result of insufficient heat throughout the joint, creating weak spots; these systems eliminate such problems. Traditional soldering methods may introduce too much heat into surrounding areas, damaging critical components or de-soldering previously soldered joints. Using resistance soldering systems will improve quality and reduce waste! Resistance soldering systems are ergonomic and versatile. Lightweight hand pieces cool within seconds, greatly reducing the likelihood of repetitive strain-injury and virtually eliminating the burn risk for the user. Versatile systems allow for easy access to restricted areas on circuit boards and inside cabinets. Resistance soldering systems can save you money! Instant heat means you're not paying to heat a soldering station all day long. Electrodes last twice as long as soldering tips and don't require constant re-wetting, thereby reducing consumable waste. American Beauty Resistance Soldering Systems get the job done. Stop trying to perform your difficult soldering operations the same old way with the same old tools. Contact DX Engineering to own of these American Beauty Resistance Soldering Systems today!
Not Yet Reviewed
$2,199.00
—
$2,399.00
OM Power OM10C 10kW Power Combiners
Product Line Title: OM Power OM10C 10kW Power Combiners OM Power OM10C 10kW Power Combiners are designed to safely and efficiently combine the output of two HF amplifiers into a single, higher power RF signal—up to 10 kW PEP total—across the entire 1.8 to 29.7 MHz frequency range. With a 50 Ohm unbalanced input and output impedance, the OM10C maintains an excellent SWR of less than 1.2:1 across the entire band—without any tuning or switching—while delivering extremely low insertion loss of under 0.3dB to preserve maximum RF power. Featuring SO 239 female input and output connectors for the amplifiers and a transceiver, a durable 7/16 DIN antenna connector, and a bright 4.3-inch color touchscreen display, the OM10C Power Combiners provide a powerful, modern solution for high performance HF stations in contest, DX, and multi amplifier environments
Not Yet Reviewed
$4,999.99
ROHN RSL Self-Supporting Towers
ROHN RSL Self-Supporting Towers are strong and lightweight towers designed for use in Amateur Radio, broadband, public safety and security applications. RSL towers can reach above line-of-site obstacles such as treetops, hilly terrain and buildings. RSL towers are shipped knocked down to reduce shipping costs and time. Bases and accessories are sold separately. - Please CLICK on the title of the product(s) listed for the Overview, Specifications, a complete Description and Suggested Parts. Links to instruction manuals also appear in the Documentation section.
Not Yet Reviewed
$2,399.99
—
$4,809.99
American Beauty Soldering Tool Parts and Components
If American Beauty's soldering tools were of typical quality, then they wouldn't offer an extensive list of soldering tool parts and components. In fact, their tools are designed to withstand the stress of production-line usage in the most difficult and rigorous industrial environments. However, as those familiar with soldering are well aware, soldering tools require regular maintenance and the occasional replacement of consumable parts. Historically, soldering-tool manufacturers had whole departments set up to service tools for their customers. As budgets tightened and these departments were eliminated, tools that were meant to last a decade or more were tossed in the trash, just like the cheap imports. American Beauty soldering tools were designed from the beginning to be serviceable! Their heating elements, connectors, handles, cord sets, foot switches, electrodes, and many other kinds of parts are replaceable. American Beauty even offers Maintenance kits and instructions on how to care for, and extend the life of, their tools! To save money on tools, you need to buy a quality tool that's right for the job...as well as serviceable. American Beauty soldering tool parts and components are now available from DX Engineering and will provide the means for you to keep your soldering tools working (and in great shape) for a long, long time!
Not Yet Reviewed
$2,195.00
ACOM 700S Solid State 1.8-54 MHz Linear Amplifiers
ACOM 700S Solid State 1.8-54 MHz Linear Amplifiers are state-of-the art amplifiers that cover all amateur bands from 160 through 6 Meters. These amps provide 700 W output power (PEP SSB or CW modes). Working parameters of the amplifier are indicated on a multi-function, high-resolution 5 inch color display. Amplifier control is accomplished with only six buttons on the front panel or directly by CAT interface from the transceiver or remotely by RS232 interface. ACOM 700S amplifiers are compatible with all transceiver models available on the market. The broadband input matches to the transceiver with low SWR over the entire range of 1.8-54 MHz. Full output operation only requires a maximum of 40 watts drive and the typical "ground on transmit" (PTT) keying with no special signals required. The overall operation of ACOM 700S amplifiers is extremely simplified. Screen menus are intuitive and easy to follow and no special skill is required from the operator when changing frequency bands. The amplifier monitors the frequency of the input signal through the built-in frequency counter and automatically switches bands. A band data or CAT interface connection from the transceiver is NOT required for automatic band changing. These amplifiers take care of themselves during operation, due to the continuously-working protection circuits in all modes. The operator can digitally monitor more than 10 parameters concerning the working conditions of the amplifier. Detailed data (55 parameters) about each of the last 28 hard-fault protection trips is stored in the amplifier's nonvolatile memory. ACOM 700S amplifiers are perfect for DXpeditions and field operation. They are extremely compact and employ light-weight construction thanks to the built-in switching-mode power supply. They operate on an extended mains voltage range** (100-120VAC and 200-240VAC) by changing only the main fuses - no internal switching is required. Please read the SPECIAL NOTE at the end of the specifications. ACOM 700S Solid State HF/6-Meter Amplifiers are among the finest and most modern linear amplifiers available anywhere in the world. These outstanding amplifiers are available from DX Engineering! ACOM 700S Solid State Linear Amplifier Specifications: * Rated output power: 700W PEP SSB or CW * Intermodulation distortion (IMD3): Better than 31dB below rated PEP output * Harmonic and parasitic emissions suppression: Better than 60dB (65dB typical) * Input and output impedances: SO-239 UHF female connectors; 50 ohm unbalanced output; * Input circuit: broadband, SWR below 1.2:1, 1.8 to 54 MHz continuous without retuning or switching * RF power gain: 14dB +/- 1dB * Complies with US Federal Communications Commission (FCC) rules and the EU safety regulations and electromagnetic compatibility standards * Temperature range: 14 degrees F to 104 F (-10 C to +40 C) * Relative humidity: up to 95 percent at 95 F (35 C) * Dimensions (WHD): 12.8 x 5.6 x 14.2 in. (326 x 143x 365 mm) * Weight: 26 lbs. (11.8 kg) **Mains supply voltage: 100-240V, 50-60 Hz, single phase, automatic switching supply; no internal change required for either mains voltage; European style 5x20mm fuses rated for 250VAC for correspond mains: 10A fuses for operation from 200-240VAC, 16À fuses for operation from 100-120VAC. SPECIAL NOTE: Due to power efficiency the use of 240 Vac service is highly recommended. -AOM-700S-240 is pre-wired with NEMA 6-15P USA plug for 240 volt operation. - AOM-700S-120 is pre-wired with NEMA 5-15P for 120 volt operation. - AOM-700S has NO PLUG; order this model to wire your own AC plug for either voltage. * AC load: 1,350VA or less with a power factor of 0.95 or higher * AC load in Low Energy (standby) mode: less than 1VA For additional information, please check the "Documentation" tab.
( 35 )
$4,367.99