Availability
Transceivers and Receivers
ICOM IC-2730A VHF/UHF FM Transceivers
ICOM IC-2730A VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430 MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730A transceivers employ a durable PA module and deliver 50 watts of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730A receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. The display size of ICOM's IC-2730A is 1.5 times larger than ICOM's other comparable models. Frequency display and channel names are larger, and the white backlight provides higher contrast. Here are more ICOM IC-2730A features: * Cross band repeater capability * CS-2730 Free PC programming software downloads * Versatile scanning capability * Squelch delay and squelch attenuator * Sub band auto mute function * Auto repeater function * Auto power off * TX time-out-timer * 16 DTMF auto dial memories * Weather channel receive with weather alert (USA version only) * CI-V remote control capability (through the optional OPC-478UC) Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * HM-207 remote control microphone * Controller cable, OPC-837 * Microphone hanger * DC power cable, OPC-1132 * Spare fuse NOTE: Optional MBA-4 bracket mounts the Control Head to the main unit. These new dual-band FM transceivers have advanced features at a very affordable price. Purchase ICOM IC-2730A VHF/UHF FM Transceivers from DX Engineering for the best in quality and customer service!
( 144 )
$339.95
Anytone AT-D890UV Dual Band VHF/UHF/DMR Handheld Transceivers
Anytone AT-D890UV Dual-Band VHF/UHF/DMR Handheld Transceivers feature built-in Bluetooth, GPS, and APRS capability. They include Air Band AM receive, cross-band repeater mode, and analog scrambler/compander functions. A vibrant 1.77-inch color TFT display provides easy access to 4,000 channels and up to 500,000 digital contacts with AES-256 encryption. These transceivers are powered by a 3100mAh battery with convenient USB-C charging and upgraded 2G memory capacity.
( 2 )
$299.99
Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs
Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs are ideal for rigorous field use! With wide-band reception, rugged and submersible design and simple keyboard commands, these Yaesu VX-6R Transceivers are loaded with features. As a bonus, these USA-version radios transmit on 222-225 MHz with 1.5 watts output!
( 60 )
$299.99
ICOM IC-2730B Black Edition VHF/UHF FM Transceivers
ICOM IC-2730B Black Edition VHF/UHF FM Transceivers boast all the same great features as the original IC-2730A transceiver, but with a new high contrast black inverted LCD display that offers improved visibility in various lighting conditions, reduced glare, and lower energy consumption. The display size of ICOM's IC-2730B is 1.5 times larger than ICOM's other comparable models, giving way for larger frequency display and channel names. These VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730B transceivers employ a durable PA module and deliver 50W of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730B receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. These IC-2730B transceivers come equipped with an HM-207 Remote Control Hand Mic. An optional VS-3 Bluetooth Headset is available and requires a UT-133/A Bluetooth module to be installed into the IC-2730B. The Bluetooth headset and module are sold separately.
( 19 )
$369.95
On Sale
Alinco DR-CS25T 1.25m / 222 MHz FM Mobile Transceivers
Alinco DR-CS25T 1.25m / 222 MHz FM Mobile Transceivers are ultra-compact and come loaded with useful high-tech features that make the operation of this transceiver smooth and easy. Its large, color-selectable LCD display is easy to read and the multi-function back-lit handheld microphone with a DTMF keypad enables direct frequency entry and remote control. The DR-CS25T features excellent transmit/receive audio, 200 memory channels, frequency and channel scanning capabilities and more. Affordable and easy to use, the all-new DR-CS25T will offer everything you expect from a 222 MHz mobile transceiver. Alinco DR-CS25 Features: - Output power selectable 50W / 25W / 10W - PC-programmable 200 channel - Alphanumeric name tags - Wide variety of selective calling features - Built-In, 2-Tone/5-Tone, 51 CTCSS, 1024 DCS, 4 Tone-burst tones and DTMF / ANI decode - Large, bright LCD and easy-to-operate backlit microphone keys - Multi-function microphone enables direct frequency entry & remote control - Various scan modes, Key lock, Wide / Narrow operations and more! - Clean, clear Alinco audio
( 11 )
$269.95
$259.95
AnyTone AT-D578UV PRO Dual-Band VHF/UHF DMR Mobile Transceivers
AnyTone AT-D578UV PRO Dual-Band VHF/UHF DMR Mobile Transceivers have an array of features that make it an excellent choice whether you're at home in the shack or on the go. With selectable transmit power levels—60/25/10/1W on VHF and 45/25/10/1W on UHF—it delivers the flexibility and range needed to reach repeaters that were previously out of range. The AnyTone AT-D578UV PRO VHF/UHF DMR Dual-Band Mobile Transceiver supports both FM Analog and Digital DMR modes across the 136–174 MHz (VHF) and 400–480 MHz (UHF) frequency ranges. It features wideband full duplex receive capability (VV/UU/V+U), allowing simultaneous reception on two frequencies. Each channel (A and B) has its own independent volume control for added flexibility.
( 3 )
$399.99
Anytone AT-D578UV III Pro Tri-Band Digital/Analog Mobile Transceivers
Anytone AT-D578UV III Pro Tri-Band Digital/Analog Mobile Transceivers are high-performance tri-band mobile transceivers built for Amateur Radio operators who value flexibility, digital clarity, and rugged reliability. Supporting both analog FM and digital DMR modes, the AT-D578UV III Pro is ideal for mobile, base station, or emergency communication use. With transmit coverage of 144–148MHz (VHF), 222–225MHz (220 MHz band), and 420–450MHz (UHF), plus wideband receive and full duplex capability (UU/VV/V+U), this radio allows simultaneous monitoring of two channels with independent volume controls. It also features DMR repeater roaming for uninterrupted communication on the move.
( 3 )
$399.99
On Sale
WiMo PicoAPRS and VHF Transceiver with GPS Receiver
WiMo PicoAPRS and VHF Transceiver with GPS Receiver - The world's smallest APRS transceiver gets even better with the introduction of Version 4 of this great little device! As in previous versions, a TNC and a GPS receiver are still included with the addition of a VHF 2-meter handheld transceiver that includes features like a PTT button, microphone, speaker, stored memories, color display and much more! The PicoAPRS V4 is a complete packet radio transceiver with built-in TNC for APRS
( 9 )
$429.99
$343.99
Fobos Wideband General Purpose SDR Receivers
Fobos Wideband General Purpose SDR Receivers offer exciting functionality designed to elevate your radio communication experience. This is a high-performing Software-Defined Radio receiver encased in a sleek, attractive blue aluminum body. Equipped with High-Speed USB 3.0, Fobos SDR ensures quick data transfer and easy device connectivity. The compact and EMI-shielded construction further enhances its durability, making it ideal for a variety of challenging environments. We are proud of the primary features of our new Fobos SDR • Broad Frequency Range: Fobos SDR offers a continuous operating frequency range from 100 kHz – 25 MHz (direct sampling) and 25 MHz – 6 GHz (double conversion heterodyne). • High-Quality Signal Conversion: Dual conversion, two HF channels, 14-bit ADC, 50 MHz IQ rate. • Continuous Data Stream: Uninterrupted recording and real-time analysis. We've enhanced Fobos Software-Defined Radio (SDR) receiver with updated features and improvements. • Added a custom GPO port for 8 lines (general purpose output – software-controlled digital outputs) for remote control of the SDR. • Improved frequency response. • Added protection against static electricity and input voltage surges. • Minimized influence of parasitic harmonics and improved resistance to noise. • The low-pass filter for HF1 and HF2 is designed for a cutoff frequency of 24 MHz. • Improved stability of USB stream. All functions mentioned above can be performed simultaneously! Fobos SDR also offers robust software support, compatible with Windows and Linux platforms. It includes a lightweight API, support for an external clock input, and straightforward driver installation that ensures a smooth user experience. Additionally, it is widely compatible with popular software such as SDRSharp, HDSDR, SoapySDR, Delphi library, GNURadio, and HDSDR ExtIO plugins, along with native uSDR support. All source codes are available on GitHub page and provided with LGPL-2.1 license. This is the best quick start SDR Receiver kit for additional software development, education and equipment evaluation. FOBOS Wideband General Purpose SDR Receivers are an excellent choice for hobbyists, researchers, and professionals in the field of radio communication, providing tools to fully leverage SDR technology.
( 1 )
$485.00
On Sale
Alinco DR-735T VHF/UHF Transceivers
Alinco DR-735T VHF/UHF Transceivers feature eight full color LED backlights that enable you to customize your display colors! DR-735s let you assign different colors for different functions. These "beautifully simple" radios have fully independent VHF/UHF keys and dials to deliver true dual-band operation. The removable front panel can be remotely mounted or inverted for optimal speaker placement. DR-735 features include: * Full-duplex receiver enables simultaneous TX/RX within 144/440MHz bands as well as V/V and U/U receiver capability. Fully independent frequency, audio level and squelch knobs for right and left VFOs make it seem more like operating two monoband radios rather than a dual band transceiver. * Simply press the volume knob to select the VFO you wish to use for transmitting. * Cross-band repeater function available on all DR-735T radios. (Be sure to observe all regulations applicable to cross-band operation.) * Computer programmable with free software from Alinco. * "Set Mode" menus are divided into basic and advanced, allowing you to assign less frequently used modes such as auto power off or busy channel lockout to set and forget. * Large heatsink and quiet fan for stability while operating * Wide and narrow ceramic filters enable true narrow band operation * Two speaker ports located on the back of the unit allow you to separate signals by both right and left sides or by internal or external speakers using audio from a single external source. Additional conveniences include: * Easy repeater access: These radios feature manual shift and offset direction setting plus preset and programmable auto-repeater settings. Includes 4 tone-burst tones * Versatile memory functions: Include 1,000 memory channels in 10 banks, 100 right-only/100 left-only memories, 100 dual memories, 5 pairs of programmed-scan channels, and 2 call channels. * Easy-to-Read Display: Large LCD screen offers adjustable display brightness, color and contrast along with 6-character alphanumeric tags, a brightness timer that boosts light levels temporarily when keys are engaged and a "scan light" feature that increases brightness for two seconds when scanning stops. * Convenient Receiver Functions: Include popular functions such as pager (icon and beep tones), extended receive, aviation and utility monitoring on VHF and UHF frequencies, a variety of selectable channel steps, CTCSS/DCS capabilities for selective monitoring, a 10dB RX attenuator, sub-band mute, reception image rejection and auto-power-off. Advanced Transmitting Features: Valued by many seasoned operators, these features are part of the set mode menu that includes time-out-timer and busy channel lockout as well as an adjustable mid-power output level, microphone gain adjustment and cross-band repeat (T model only)*. Selectable Scan Modes: Choose from a variety of scan modes that include VFO, memory, programmed or priority scans with busy and timed modes, CTCSS/DCS tone detection and memory scans with "skip" and "favorite" settings. (Utility software required for priority scan setting.) Popular Features: Other popular features include single-band mode, a restore function that recalls set-mode settings even after a complete reset, five different reset modes (system, complete, VFO, memory and color resets), cable-cloning and utility software. Note: For additional information, please look at the files under the "Documentation" tab. Included equipment: * Microphone: EMS-79 DTMF (standard on "T" version) * DC power cable: UA38Y * Bracket Hardware Pack: ADFM78 Optional equipment: * Digital modulation unit: EJ-47U * Control head separation kit: EDS-30 * 8-pin microphone adapter: EDS-8 * USB Computer interface cable: ERW-7 Are you looking for a great dual-bander? Look no farther than one of these Alinco DR-735 VHF/UHF Transceivers from DX Engineering!
( 40 )
$345.95
$329.95
Manufacturer Rebate
ICOM ID-50A VHF/UHF Multi-Function D-Star Handheld Transceivers
The ICOM ID-50A is a compact, dual band 2m/70cm digital transceiver that brings the fun of the D-STAR to life and includes functions to enhance your QSO experience making the ID-50A the perfect travel companion. The Band Scope and Waterfall displays can visually show active channels with a wide span and timeline, making it easy to find active channels by sight. The Dual-Watch function doubles QSO opportunities to monitor VHF/VHF, VHF/UHF, and UHF/UHF bands at the same time and can receive both FM and Air bands. The built-in GPS receiver displays the current grid square information and this GPS position data can be used for Position Auto Reply, Near Repeater Search and GPS log functions.
( 12 )
$499.95
ICOM RC-28 Remote Control USB Encoders
If you are tired of driving your remotely controlled ICOM rig with a mouse, then these ICOM RC-28 Remote Control USB Encoders are for you! These RC-28 controllers are an optional electronic encoder that functions as a companion to the RS-BA1 IP Remote Control Software. This unit connects to your PC via the included USB cable. Cleverly using the same tuning knob and digital encoder as used on ICOM HF radios, these accessory controls provide a more tactile option to accompany the control software. It really "feels" like you are tuning YOUR RADIO! These electronic controls include a push-to-talk switch and two additional programmable function keys. Program one to activate antenna tuning! The RS-BA1 software requires a free patch to be downloaded in support of this device if yours is earlier than version 1.3. Don't rely on tuning your remotely-controlled radio with a mouse. Order your ICOM RC-28 Remote Control USB Encoders from DX Engineering and use a better mouse trap!
( 21 )
$339.99
ELAD TM-2 Console for SDR Radios
ELAD TM-2 Console for SDR Radio is a remarkable desktop USB controller that provides the knobs, buttons and display for the operation of a several different software programs for Software Defined Radio receivers and transceivers. Developed specifically for Software Defined Radio users who prefer the tactile operational comfort of a 'traditional' knobs and buttons radio while using the most up-to-date SDR technology. The TM-2 allows the manual manipulation of an SDR or rig control program without the need to touch a mouse or watch a computer monitor. This is especially helpful when a limited screen area is in use by other programs for logging, digital and contest operations. The ELAD TM-2 controller (formerly known as the WoodBoxRadio Tmate 2) is connected by USB to the computer that is running the SDR or rig control software. Depending on the software it offers controls that are typical of a traditional radio front panel as well as many extra controls with programming menus. The selectable color backlit Liquid Crystal Display shows the current frequency, the signal level, the current mode and much more. Six push buttons are available for often used functions, such as mode selection, step width, receiver mute etc. Equipped with heavy, metal knobs, one large rotary encoder serves as the "VFO" frequency control, while two smaller metal knobs can be assigned for AF Gain, RF Gain or Filter Width control, or to most other functions, as desired. Each of the rotary encoders is also a push button, which may be used to toggle the knob to many other assignable functions. Since it is so important, it bears repeating: one of the biggest benefits of the TM-2 is that instant and simultaneous control and display of frequency, mode and other conditions of the SDR receiver or transceiver program is possible, all while a logging, digital mode or contesting program is active in the foreground on the computer monitor. Connect the TM-2 to the computer running the SDR program or rig control using the included USB A to USB B cable. This controller uses the standardized HID protocol for USB devices, so it does not require special drivers on recent operating systems. The TM-2 case is metal, giving it a solid touch and feel with a convenient 45-degree angled panel. Power is supplied over the USB connection, so a separate power supply is not required. The TM-2 dimensions are WHD is 5.630 x 3.071 x 5.315 in. (143 x 78 x 135mm) and it weighs 1.72 lbs. (780g). NOTE: The operation of this device can require the installation of additional software and drivers, which are not included in the shipment, and which may require an additional purchase. The appropriate free software (e.g. Tmate2CatConsole) appears at the manufacturer's website. Supported Programs and Devices for the Elad TM-2 The TM-2 can be used directly with these programs [*] without additional software: • FDM-SW1 [*] • FDM-SW2 [*] • Studio1 [*] • SDR-Radio Console V2 [*] • N4PY Software [*] and more... For operation of the TM-2, these programs (**) require additional software, not included: • PowerSDR (FlexRadio, Beta status, requires Tmate2CatControl Software) [**] • Perseus (Microtelecom, Alpha status, requires Tmate2CatControl Software) [**] • HPSDR PowerSDR (Apache Labs ANAN-xx Transceiver, Beta Status, requires Tmate2CatConsole Software) [**] Required Downloads [**] a) Tmate2CatControl available from eladit.com download, free of charge, and b) Virtual Serial Port Emulator for 64 Bit operating systems, which is purchased and downloaded online from Eterlogic, a trusted Norwegian company.
( 2 )
$289.99
Alinco DR-MD500T Advanced Dual Band VHF/UHF DMR Mobile Transceivers
Alinco DR-MD500T Advanced Dual Band VHF/UHF DMR Mobile Transceivers add to its existing line-up of Digital Commercial/Business or Amateur Radio products. The DR-MD500T has features such as Color LCD Display, 55W Output Power on VHF, and 40W on UHF, as well as up to 4,000 Memory Channels, 10,000 TalkGroup, and up to 300,000 contact lists. Capable of operating in digital and analog with mixed mode in VFO or Memory mode. The DR-MD500T utilizes DVSI's AMBE+2 vocoder for crystal clear DMR digital audio for use in noisy environments like construction sites, parks, security applications, or your favorite repeaters coverage area with no noise or fading even in low lying areas. The DR-MD500T has powerful 2W audio output power to ensure loud crisp receive audio. Alinco DR-MD500T features: * DMR Tier I and Tier II * MAX output power 55 watt (VHF)/40 watt (UHF) * 4,000 channels, 250 zones, 250 scan lists * 300,000 digital contact list * Large 1.77 in. LCD display * Automatic Repeater Roaming * Single or dual channel selectable * Displays DMR ID, Call sign, Name * X-band repeat, analog uplink/digital downlink or vice versa * FM Broadcasting receiver with 100 memory channels and VFO * AES 256bit Encryption (digital mode) * SMS (digital mode) * Communication recording (digital mode) * Individual/Group/All call (digital mode) * CTCSS/DCS/DTMF/2Tone/5Tone encode and decode (analog mode) * Allows CSV export/import of setting parameters * Programmable Auto Repeater Shift in VFO mode * Kill and Stun functions * VFO/MR switch * FCC Part 90 certified
( 11 )
$379.95
On Sale
Alinco DJ-MD5XLT VHF/UHF Dual Band DMR Handheld Transceivers
Alinco DJ-MD5XLT VHF/UHF Dual Band DMR Handheld Transceivers are Alinco's latest 3rd Generation Part 90 certified handheld transceivers with built-in GPS to hit their exciting Amateur Radio and Commercial line-up of Digital handhelds. -- Please CLICK or TAP on the title of a listed item for an overview: a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.
( 3 )
$299.95
$259.95
Alinco DJ-X100T Wideband Multi-Mode Handheld Receivers
Alinco DJ-X100T Wideband Multi-Mode Handheld Receivers are a powerhouse of versatility and durability, with advanced receiving capabilities, robust construction, and user-friendly features. The DJ-X100T covers the frequencies range from 30 - 470MHz, and 76 - 108MHZ (WFM only), with the low VHF to UHF bands optimized for consistent sensitivity across the entire range. Leveraging Alinco's extensive receiver design expertise, the DJ-X100T delivers clear audio through DSP, offers various reception modes via SDR configuration, and features GPS-enabled selective scanning of nearby stations. The DJ-X100T is more than just a receiver; it's a versatile multi-mode device. In addition to widely used analog AM/NAM/FM, NFM, and FM modes, the DJ-X100T supports popular digital modes such as DMR, D-Star, and C4FM, just to name a few.
( 2 )
$469.95
STAMPFL HAM Electronics VT5-S Active HF Receiver Multicouplers
STAMPFL HAM Electronics VT5-S Active HF Receiver Multicouplers were developed according to a design by Günter Fred Mandel DL4ZAO especially for SWL (Shortwave Listener) covering 9 kHz to 52 MHz. The VT-5S distributes a single near zero-Ohm star point (HF antenna input) to five outputs with a passive distribution network. This decoupling of the individual outputs prevents connected devices from influencing each other without level losses using a low-noise, high-dynamic RF amplifier and a push-pull output stage. These HF Multicouplers ensure high signal stability, minimal self-noise, and strong isolation between outputs. Additional protections include ESD protection on the input and short-circuit protection for the bias-T, which can remotely power active antennas. The VT5-S Multicoupler is designed to supply an external stabilized DC voltage . With an operating voltage in the range of 11.7 to 15VDC. The DC voltage must be free of hum and noise. The current consumption is approx. 150mA (at 13.8VDC). The DC supply is connected via a center positive 2.1mm ID (5.5mm OD) DC barrel plug. With its compact, lightweight design, the VT5-S delivers reliable performance for professional and hobbyist HF monitoring stations.
Not Yet Reviewed
$309.71
AnyTone AT-6666Pro 10 Meter Mobile Transceivers
AnyTone AT-6666Pro 10 Meter Mobile Transceivers are single band transceivers that provide 80 Watts on CW and SSB (50 Watts on FM). This compact mobile radio has the features you want in a radio: Multi-Mode, adjustable tuning steps, Dual Watch Function, CTCSS/DCS codes, scan function, and is PC programmable. With 99 memories, there is sure to be enough memories to store your commonly used frequencies. Covering all modes on the entire 10-meter band, this compact radio is a perfect fit for today's vehicles. The front panel features a 6-pin connector for the microphone, and the rear panel features an SO-239 for the antenna connection, a speaker jack and the connection jack for PC Programming. Software is available from AnyTone's website. The large display provides information as to the status of the radio including the current mode of the transceiver, frequency, memory channel, status of various functions, and signal strength. It is also possible to change the backlight color to any one of 7 predefined color options as well as the brightness of the display. Additional features include tuning steps ranging from 10Hz to 1MHz, Clarifier, Noise reduction on both Transmit and Receive, squelch and automatic squelch on AM and FM, Repeater offsets, VOX, and a user-defined button on the microphone. The AnyTone AT-6666Pro provides the features that you expect in a compact, professional-grade mobile transceiver. The AT-6666 has modest power needs for a radio that can output 80 watts, requiring only 15A at 13.8VDC and will fit in most vehicles with its small size at 9.92 in x 6.22 in x 1.89 in. Additional Feature and Specifications: • LCD display with 7 color options and back light dimming • FM, AM, USB, LSB, CW, PA modes • Frequency Tuning Steps: 10Hz, 100Hz, 1KHz, 5KHz, 10KHz, 100KHz, 1MHz • ± 500Hz, 5KHz Clarifier (R/T/R+T selectable) • Flexible menu functions and PC programming software • RX and TX NRC Noise Reduction • SQ, ASQ Function (FM and AM mode) • RF GAIN Adjustment • RF PWR Adjustment • VFO / BAND / Memory Channel Modes • Repeater Shift / Offset Frequency Function • CTCSS/DCS with RX/TX Split functions • SCAN Function • NB/ANL Function • DW DUAL-WATCH Function • SWR, S/RF meter Function • TOT function • HI-CUT Function • EMG CALL • SWR Protection • Power Supply Voltage Protection • Key-Lock Function • DTMF Function • BEEP Prompt • Enhanced VOX Function (VOX.SPK can support digital mode operation) • ECHO Function • Programmable RB Function • AM TX NPC • User Defined (PF) key on microphone • Audio path select • +10KHz Function Dimensions: (LWH): 9.92 x 6.22 x1.89 in. Weight: 2.80 lbs.
Not Yet Reviewed
$299.99
FlexRadio Flex Antenna Tuner Plug-in Module Kits
FlexRadio Antenna Tuner Plug-in Module Kits offer a convenient, user-installable solution for enhancing your Flex 8400(M)/8600(M) transceiver's performance. Designed for flexibility, these kits allow operators to customize their radios based on operational needs. The FLEX-8400 Automatic Antenna Tuner can match up to a 3:1 SWR on 80–10 meters and up to 2.5:1 SWR on 160 and 6 meters, ensuring efficient power transfer and reliable operation across a wide frequency range.
( 1 )
$350.00
VE2DX Electronics ICOM HDMI Interface & Screen Combo
Upgrade Your Shack with the VE2DX ICOM HDMI Interface & Screen Combo! Limited quantities! Enjoy a crystal-clear 15-inch HDMI monitor and the powerful IM1-HDMI V2 Digital Meter Display with TrueCIV Data Interface. This compact, ESP32-based device connects seamlessly to over 20 Icom radios via CI-V cable, Bluetooth, or USBoIP, giving you flexible options for any setup. Free your main radio display for band scope operations while monitoring critical metrics on a dedicated screen with customizable bar or needle meters. Engineered for performance, the IM1-HDMI V2 features Bluetooth, USB, and CI-V ports, including an internal CT17B-Nano V2 hub with TrueCIV for unmatched RFI resistance. It supports multiple accessories like band decoders, antenna controllers, amplifiers, tuners, and filters—all powered with a simple USB-C connection or supply. Perfect for IC-705 users, it solves the missing CI-V port issue with Bluetooth pairing. Added perks? A programmable SWR alarm for peace of mind and integrated magnets for quick, hassle-free installation. Note: This is not a transceiver screen adapter and does not display a band scope—it's a dedicated meter display designed to optimize your operating experience. VE2DX Electronics ICOM HDMI Interface and Screen Combos include: • 15 in. HDMI Monitor Screen with power supply. • IM1-HDMI V2 Icom Digital Meter HDMI Display and TrueCIV Data Interface • RFI filtered cables
( 2 )
$329.99
Rugged Radios 2-Way GMRS Mobile Radio Kits
"Go Further" on your next overland adventure and stay connected with Rugged Radios 2-way GMRS mobile radio kits. Available in a powerful 45 watt or waterproof 25 watt models, GMRS (General Mobile Radio Service) radios will keep you talking for miles, while experiencing crystal clear communications with Rugged's low-loss, double-shielded cable transmitting through the GMRS-tuned antenna. Installation is fast and easy! Simply mount the radio, run the wiring, and connect the power. Off-road and adventure friendly antenna mounting locations allow positioning out-of-the-way of roof racks and overhead tents, perfect for overland and rock crawling. Some kits also include an easy-to-install antenna adapter mount for existing A-pillar light mounts. All mounts and hardware are included, and you can easily connect to intercom, headset, or any 5-pin accessory with the built-in Rugged Ready pigtail cable. Choose a kit designed for your vehicle with the GMRS radio you prefer. Features: * GMRS mobile radio--powerful GMR45 or waterproof GMR25 model * Will communicate with all GMRS and FRS radios: -- GMRS channels 1 to 7--5 watts -- GMRS channels 15 to 22--up to 50 watts -- Eight repeater channels -- 155 privacy codes * Best-in-class GMRS tuned antenna * Low-loss double-shielded antenna coax cable * Easy install interior radio mount * Driver or passenger side antenna mounts (depends on kit) * Antenna adapter for pillar lights (where applicable) * Talks to all other brand GMRS radios
Not Yet Reviewed
$367.99
Armoloq Tactical Protective Armor (TPA) Modular Radio Mounting Frames
Armoloq Tactical Protective Armor (TPA) Modular Radio Mounting Frames are a modular radio mounting solution developed from real-world military and Amateur Radio experience. Designed to enhance the deployment and protection of radio equipment in any operating environment, the Tactical Protective Armor (TPA) serves as a rugged, two-piece aluminum frame that securely mounts to the radio's chassis. CNC laser-cut from 1/8-inch 5052 aluminum and finished with a matte black powder coat, the TPA offers a wraparound design that shields both the radio body and control head while maintaining full access to controls and ports. Engineered for Amateur (Ham), Land Mobile Radio (LMR), and General Mobile Radio Service (GMRS) applications, each TPA is tailored to fit specific radio models from leading brands such as Yaesu, Icom, Kenwood, Motorola, Xiegu, Alinco, Anytone, BTECH, TYT, Wouxun, and Midland. After years of field testing and refinement, the TPA has become the cornerstone of Armoloq's mission to deliver durable, functional, and affordable radio mounting solutions.
( 4 )
$275.00
Alinco DR-MD520T Advanced Tri-Band VHF/UHF/DMR Mobile Transceivers
Alinco DR-MD520T Advanced Tri-Band VHF/UHF/DMR Mobile Transceivers are the latest addition to the Alinco Amateur Radio lineup. These advanced tri-band mobile DMR 144/220/440MHz radios come packed with features such as: a large 1.77 in. color LCD display; easy-to-use front panel; a hand microphone with built-in remote-control keypad; and a powerful 2 watts of audio output to ensure loud, crisp receive audio. Power output of the DR-MD520T is 55 watts on the 2 M band, 5 watts on 1.25 M, and 40 watts on the 70 cm band—and can operate in digital and analog with mixed-mode in VFO or Memory mode. A built-in GPS receiver also supports APRS in both analog and digital modes. Store up to 4,000 Memory Channels, 10,000 Talk Groups, 250 zones, 250 scan lists, and up to 500,000 digital contact lists. The DR-MD520T uses DVSI's AMBE+2 vocoder for crystal clear DMR digital audio for Amateur Radio applications or your favorite repeaters coverage area with no noise or fading even in low lying areas. Receiver capabilities include FM Broadcast and AM Aircraft Bands.
( 4 )
$449.95
BridgeCom Maverick Dual Band DMR/Analog Handheld Transceivers
BridgeCom Maverick Dual-Band DMR/Analog Handheld Transceivers are designed to help both new and experienced amateur radio operators get on DMR quickly while delivering the advanced capabilities serious hams demand. Designed with next-generation performance in mind, Maverick offers faster response times, smoother navigation, and enhanced reliability for everyday operation. Its feature-rich platform includes AirBand receive, crossband repeat, satellite communication support, companded audio for clearer transmissions, digital and analog voice recording, and a roadmap for future feature enhancements through updates. For DMR users, the Maverick stands out with an impressive 500,000-contact capacity, providing access to an extensive worldwide contact database for seamless operation on local and global networks. A high-capacity, long-lasting battery with convenient USB-C charging keeps you connected during road trips, public service events, nets, field operations, and emergency communications. Built for real-world use, the Maverick is rugged, dependable, and field-tested by active amateur radio operators to withstand the demands of daily operation, making it a versatile and powerful handheld for virtually any operating environment.
Not Yet Reviewed
$299.99