Availability
Station Accessories
DX Engineering ISO-PLUS Ethernet RF Filters
DX Engineering ISO-PLUS Ethernet RF Filters are very effective EMI Suppressors that are quickly and easily connected inline on Cat5e or Cat6 network cables. Their patented* design provides common mode RF interference and EMI noise filtering of radio frequencies from well below 1 MHz to 100 MHz and beyond. DX Engineering ISO-PLUS Ethernet RF Filters have no effect on throughput; Ethernet data signal levels and speed remain unchanged. *US Patent No. 11,211,679 B2 Electromagnetic interference (EMI), also known as RF interference (RFI), can be imposed onto your received radio and data signals from many electronic devices normally found around a residence, a radio room or a business network. Areas of major concern are the Gigabit Ethernet Cat5(e) and Cat6 cables used for network (LAN) connections between personal computers, printers, multi-port switches, cable modems, routers and radio transceivers, and between many other devices. DX Engineering ISO-PLUS RF filters, installed on both ends of Ethernet cables, work two ways. First, they can mitigate RF interference caused to the Ethernet connected device. Second, they can reduce interference to radio receivers and other Ethernet devices that is caused by RFI or EMI generated by an Ethernet connected device. ISO-PLUS filters are sold in pairs and are normally installed at each end of an Ethernet cable; one filter at the RJ-45 Ethernet plug of the first device and the other filter at the RJ-45 Ethernet plug of the second device. Each ISO-Plus comes with one six inch shielded RJ-45 patch cable (color may vary). They are designed to be installed in pairs; offered in a 2 filter package DXE-ISO-PLUS-2 or a 10 filter package DXE-ISO-PLUS-10. Click "More Details" below for additional information. DX Engineering ISO-PLUS Ethernet RF Filters are an important tool to improve productivity and radio reception of weak signals. "If you can't hear them, you can't work them." Order ISO-PLUS Ethernet RF Filters exclusively from DXEngineering.com
( 49 )
$81.99
DX Engineering Foot Switches
DX Engineering Foot Switches are pedal-type switches used for conveniently keying transceivers, amplifiers and other radio or electronic equipment. Available in three styles, these foot switches will suit any ham's equipment keying requirements. Choose from a lightweight, economical and highly visible yellow-plastic switch; or a cast iron switch for extended durability, or an extra-wide cast iron switch for rugged convenience. These well-built, momentary-contact switches feature spring-loaded pedals that are built into tough bodies with slip-proof foot pads and rubber feet that promote positive, reliable switching again and again. Use one of these fine DX Engineering Foot Switches for your PTT keying and switching needs!
( 127 )
$65.99
On Sale
RigExpert MATCH Advanced Upgrade License
The RigExpert MATCH Advanced Upgrade License unlocks expanded features and tools that are not available with the Basic version. The Advanced License enhances your REU-MATCH Analyzer with tools and features for reliable measurements and advanced capabilities up to 230 MHz, ideal for HF and VHF bands. This unique upgradable architecture allows the REU-MATCH to evolve alongside your needs. This feature ensures that your investment remains relevant as technology and your requirements advance.
Not Yet Reviewed
$100.00
$80.00
DX Engineering Ferrite
DX Engineering Ferrites are partially magnetic metal and ceramic mixes available in a variety of forms, including toroid core, bead type and plastic-covered split-bead ferrite called snap-beads. They are used in a myriad of RF suppression applications to mitigate RFI (radio frequency interference) as well as to reduce pulse and other types of RF noise interference. Special ferrites are used for experimentation and electronic circuit building and for making transformers, RF chokes and antenna baluns. The variations of magnetic and non-magnetic metals and non-metal ceramics used to make ferrites are called "Mixes" and each has different radio frequency properties or ranges. Therefore, different mix number ferrites are typically used for different applications within those ranges, determined by decades of experiments by engineers and applications by hams. Each Mix has been assigned a color code to help identify the ferrite, so numerical labeling is not used on the metal. Color coded ferrite can be identified long after the numbered package is discarded or has disintegrated with time. How do they work? Simply use snap-on beads on a cable or wire. An even more effective choke takes a few to several turns of a wire or cable through and around a ferrite snap-on bead or toroid core. This mitigates RFI to, or from, the connected RF noise producing or noise affected electronic device. The results can be very surprising. Solving noise and RFI can be frustrating. Due to the nature of RF and noise interference suppression; the techniques of appropriate use of ferrites can take a bit of trial and error, but are often the best solution for a difficult problem. Use DX Engineering Ferrite for an incredible range of electronic circuits, noise abatement and RF suppression projects. The details of DX Engineering Ferrite mixes and types appear in each product description. Sizes and applications are discussed in "More Details" and in the literature available at the "Documentation" tab of each of these products.
( 197 )
$51.99
—
$99.99
Yaesu SCF-1 FTX-1 Field External Cooling Fans
Yaesu SCF-1 FTX-1 Field External Cooling Fans are an optional cooling fan designed to fit the FTX-1 Field Transceiver. This compact fan provides efficient cooling, especially when operating with an external DC power supply, ensuring stable performance even under demanding conditions.
Not Yet Reviewed
$61.99
Lido LM-802-705 Cup Holder Mount for IC-705 and FTX-1 Field
The Lido LM-802-705 cup holder mount for IC-705 and FTX-1 Field is a heavy-duty accessory designed for heavy control heads. The base expands out to 3.5 in., and the mount is 9 in. in height, but can be adjusted using the swivel system. This mount is built around Ram's 1 in. ball system, so it will swivel into just about any position you need it to. It comes with a 1/4 X 20 bolt that will thread directly into the Icom IC-705, Icom IC-7100 or Yaesu FTX-1 Field control heads.
( 8 )
$59.95
HRD Software Ham Radio Deluxe
HRD Software Ham Radio Deluxe for Windows delivers a wealth of user-friendly functionality in a complete software suite for amateur radio enthusiasts. The HRD software suite for Windows is available for purchase as a full version perpetual license key. That means you pay a one-time cost for the software that will function indefinitely, plus one year of updates and direct support! An additional annual fee obtains updates and support beyond the first year. Ham Radio Deluxe is a comprehensive collection of five modules that gives you full command of your transceiver from your computer screen, lets you monitor amateur radio satellites, makes logging and tracking your QSOs a breeze, provides simple rotator control, supports the full range of digital modes and offers many more features and benefits in a single package
Not Yet Reviewed
$99.95
FlexRadio Maestro Hinged Feet
FlexRadio Maestro C Hinged Feet are constructed from black anodized aluminum and feature constant torque hinges with no adjustments required. This will hold your Maestro at the perfect viewing angle for whatever surface you sit it on. The feet will also fold flat against the back of the Maestro C console for easier transport.
( 2 )
$99.99
JOES Racing Products Switch Panels
JOES Racing Products offers a variety of high-quality switch panels from ignition to start to accessory panels. JOES Racing has numerous panel combinations to meet your needs. The ignition switches feature an aircraft-style flip cover, while start and accessory switches have waterproof boots to seal out moisture and dirt.
Not Yet Reviewed
$56.99
—
$99.99
Gator Cases Rackworks Equipment Rack Shelves
A Gator Cases Rackworks Equipment Rack Shelf will support and mount equipment that is not built to be rack mountable. A wide variety of multi-purpose rack shelf configurations and depths allow you to customize your equipment case. Available shelf models include solid metal, pre-drilled with many holes for equipment mounting and several versions have elongated slots for ventilation. All Rackworks Equipment Rack Shelves are made of cold rolled 16 gauge steel with a black powder coated finish. These are rugged metal shelves to accommodate all types of equipment. They may be mounted for use as a tray or inverted and used as a platform. Customize the configuration of your case with Gator Cases Rackworks Equipment Rack Shelves from DX Engineering.
( 3 )
$59.49
—
$84.99
On Sale
RigExpert MATCH Advanced to RFE Upgrade License
The RigExpert MATCH Advanced to RFE Upgrade License is designed for professionals and enthusiasts working with radiofrequency (RF) systems, offering enhanced functionality for antenna and cable analysis with the RigExpert MATCH that has an existing Advanced license. With this ADV to RFE license upgrade, users can extend the operational range of their MATCH up to 500 MHz, making it ideal for a wide array of applications in telecommunications, broadcasting, and electronics diagnostics. The RFE license is tailored for: - RF engineers and technicians diagnosing and maintaining transmission lines. - Network professionals optimizing antenna systems. - Hobbyists and researchers delving into RF analysis within their licensed frequency range.
( 2 )
$100.00
$90.00
Lido LM-802 Deluxe Heavy-Duty Cup Holder Mounts
Lido LM-802 Deluxe Heavy-Duty Cup Holder Mounts are a perfect way to safely mount your control head in a way that is safe and without damaging your vehicle. Simply twist the base of the cup holder mount and it will expand up to 3.75in to fit most cup holders. Comes with a four-hole AMPS plate to mount your control head or small mobile transceivers. This Deluxe Package includes the LM-EXT-01 accessory kit allowing for ease of installation.
Not Yet Reviewed
$69.95
JOES Racing Products Universal GoPro Mounts
JOES Racing Products universal GoPro mounts are mobile and media device mounting accessories that are designed to swivel and pivot—so you can aim your camera to get the perfect shot. The high-quality aluminum adapters are stronger and more stable than other brands, allowing you to get cleaner videos and reducing the chance of you losing your GoPro.
Not Yet Reviewed
$79.95
Icom Radio Dust Covers
Icom Radio Dust Covers are a stylish way to protect your expensive Icom Radio from dust and scratches. Each one is custom designed to fit a specific radio, featuring an embroidered Icom logo and the model number of the radio under it, this synthetic leather cover is as stylish as it is practical. The inside of the cover is a soft brushed felt which will protect the finish of the radio as well as protect the display from scratches. An open back on the cover allows all the cables to remain connected, meaning that when you're ready to operate, all you have to do is remove the cover and you're ready to go. Order an Icom Radio Dust Cover to protect your Icom Radio today!
Not Yet Reviewed
$75.00
FlexRadio Maestro Acrylic Dust Covers
FlexRadio Maestro Acrylic Dust Covers are form fitting covers to protect the screen and controls of your Maestro A, B or C from scratches dust and damage when not in use or while transporting the Maestro Control Console.
( 1 )
$59.99
DX Engineering Logo UltrAtomic® Wall Clocks
DX Engineering Logo UltrAtomic® Wall Clocks feature dramatically improved reception and reliability, to automatically set and keep time, even at daylight saving time changes. Excellent readability and attractive styling make this special DX Engineering 14 inch analog clock a great addition to any Amateur Radio station, office complex, school or home. The UltrAtomic receives the enhanced phase modulated WWVB broadcast signal introduced by NIST in 2012. This advanced technology allows the radio time signal to "break through" barriers like cement walls, unlike previous PWM only Atomic clocks. This is the DX Engineering version of the La Crosse Technology wall clock that was the first on the market to be based on this enhanced broadcast, offering unparalleled reception. UltrAtomic clocks operate even in the harshest conditions, where the signal-to-noise ratio interferes with radio-controlled clock reception using the legacy AM signal broadcast. UltrAtomic technology digitally processes the received signal via an integrated circuit within the clock. It leverages the advanced modulation scheme and new data encoding. The reception reliability of the technology has been validated in the most challenging locations and scenarios and has been demonstrated successfully throughout all of North America. UltrAtomic clocks allow you to select any time zone with a custom setting, especially UTC/GMT. Now you can enjoy UltrAtomic accuracy, while viewing any time zone around the world. The phase modulated WWVB broadcast provided by the National Institute of Science and Technology (NIST) includes a notification for the daylight savings time transitions well ahead of when they are to occur. The UltrAtomic clock reads and stores this information and, at the appropriate instance, automatically advances the hands one hour in the spring and eleven hours in the fall (to move back one hour), even if the signal is not received on the day of the transition. * UltrAtomic time with manual set option * Barrier-resistant signal reception with dual antenna that is insensitive to orientation * Adjustable time and zone (24 hour World Time) from UTC+0h to -11h * Eco Mode extends battery life--turns second hand off from 11 pm to 5 am * Q-Mode (Quartz Mode) for manual time setting * Automatically updates for daylight saving time (with DST On/Off option) * 14 in. stainless steel frame bezel * Glass lens * Black metal hands and black numerals on white background * Low battery detection indicator--second hand stops at 6 * Powered by 2 or 4 high-quality "C" LR14 batteries (not included) for up to 3 or 6 years of operation in Eco Mode
( 4 )
$89.99
ICOM MBF-705 Desktop Holder for IC-705
ICOM MBF-705 Desktop Holder for the IC-705 makes the portable transceiver steady and positioned upward for easy viewing and operation. Order the MBF-705 for your IC-705. You will be glad you did!
( 7 )
$53.99
La Crosse Technology 14 in. UltrAtomic Analog Wall Clocks
La Crosse Technology 14 in. UltrAtomic analog wall clocks are the first Atomic clocks on the market that receive the new phase modulated enhanced WWVB broadcast signal, recently introduced by NIST. This advanced technology allows the radio time signal to "break through" barriers like cement walls that previous versions could not. This radio-controlled clock has greatly improved reception and reliability, making it a great addition to any office complex, school or home. This line of products is the first the market to be based on this enhanced broadcast, offering unparalleled reception. UltrAtomic clocks operate even in the harshest conditions, where the signal-to-noise ratio interferes with radio-controlled clock reception using the legacy AM signal broadcast. UltrAtomic technology digitally processes the received signal via an integrated circuit within the clock. It leverages the advanced modulation scheme and new data encoding. The reception reliability of the technology has been validated in the most challenging locations and scenarios and has been demonstrated successfully throughout all of North America. UltrAtomic clocks allow you to select any time zone with a custom setting. Now you can enjoy UltrAtomic accuracy, while viewing any time zone around the world. The new WWVB broadcast provided by the National Institute of Science and Technology (NIST) includes a notification for the daylight savings time transitions well ahead of when they are to occur. The UltrAtomic clock reads and stores this information and, at the appropriate instance, automatically advances the hands one hour in the spring and eleven hours in the fall (to move back one hour), even if the signal is not received on the day of the transition. * UltrAtomic time with manual set option * Barrier-resistant signal reception with dual antenna that is insensitive to orientation * Adjustable time and zone (24 hour World Time) from UTC+0h to -11h * Eco Mode extends battery life--turns second hand off from 11 pm to 5 am * Q-Mode (Quartz Mode) for manual time setting * Automatically updates for daylight saving time (with DST On/Off option) * 14 in. stainless steel frame bezel * Glass lens * Black metal hands and black numerals on white background * Low battery detection indicator--second hand stops at 6 * Powered by 2 or 4 high-quality "C" LR14 batteries (not included) for up to 3 or 6 years of operation in Eco Mode Order the La Crosse Technology model 404-1235UA-SS 14 in. UltrAtomic wall clock from DX Engineering!
( 2 )
$96.99
NANUK Equipment Cases
NANUK Equipment Cases are designed to protect your most sensitive equipment in even the harshest environments. Whether battling the scorching heat of the Sahara or the bone chilling cold of the Arctic, every detail of NANUK cases has been refined and perfected to offer the utmost in protection and performance. All NANUK Equipment Cases offer these unique qualities: * Waterproof; watertight to IP67 standards** * High performance gasket * Lightweight NK-7™ resin construction * Impact resistant** * Crushproof * Dustproof** * Powerclaw™ latching system * Soft grip foldable handle * Accepts padlock * 100 percent stainless steel hardware * Automatic pressure release valve (for air travel) * Molded-in bezel system * Integrated lid stay * Stackable ** Certified to have passed ATA300 impact standards, ASTM D4169 impact, rain, vibration and drop tests, Mil-STD-810F immersion test and IP67 ingress protection tests. From their high-impact NK-7™ resin to their PowerClaw™ latches, NANUK cases have been engineered and manufactured to stringent military specifications and are able to surpass the needs of the most demanding users. These virtually indestructible, lightweight, watertight cases offer the ultimate grade of protection in a variety of sizes, configurations and colors. Simply choose a model based on your physical volume requirements and choice of hue. Complemented by a large selection of optional accessories, like foam inserts and padded dividers, and offering an incredible degree of customization, NANUK cases are the best choice to move your equipment in complete security. Whether transporting very expensive equipment around the world or simply protecting sensitive equipment in the urban jungle, NANUK Equipment Cases are up to the challenge!
( 13 )
$54.95
—
$89.95
GCI Outdoor Slim-Fold Cook Stations
GCI Outdoor Slim-Fold Cook Stations make meals easier to prepare, no matter what's on the menu. A hassle-free design offers convenience with tons of features, including fold-out side tables and hooks for trash bags or utensils. They're ideal for tailgating, camping, picnics, and more! Additional details: * Heat-Resistant Table Top: Safely use a camp stove on the aluminum top * Slim-Fold Technology: Frame folds flat for compact portability * Carry Handle: Built-in handle for portability * One-piece, no-hassle design * Multi-use side tables and storage rack * Paper towel holder * 32.3 in. high x 52 in. wide x 21 in. deep
Not Yet Reviewed
$100.00
Ram Mounts X-Grip Holders
If you're looking for a compact mobile mount for your tablet, pad, or cell phone without the cookie-cutter shape, your search is over! Ram Mounts X-Grip holders have a clean and clever 4-leg design, offering great holding power without hiding your hand-held device behind foam pads and plastic. These mounts are a perfect complement to the modern, sleek interior of today's vehicles. Ram Mounts X-Grip holders are compatible with most hand-held devices. You can purchase your X-Grip holder in a predetermined combo with various arms and mounts, or as a stand-alone accessory and build from there. Models are available in more than a dozen base or mount options. These elegant holders will become the most useful addition to your vehicle. Compatible with most mobile devices with or without cases, including: * Apple iPhone (all models) * Apple iPod touch (all models) * Apple iPod (all models) * Samsung Galaxy S4 * Amazon Kindles
( 1 )
$54.99
—
$93.49
PanaVise PortaGrip Phone Holders
PanaVise PortaGrip Universal Phone Holders with Suction Cup Mounts securely hold your mobile phone while you drive. Paired with PanaVise's industry- leading suction cup technology, these new PortaGrips provide a secure in-vehicle mounting solution for your phone. PortaGrips are the core product in the PanaVise Mobile Solutions line, consisting of mounts and accessories designed for today's smartphone user. Designed for smartphones with large touch screens, thin bezels, and various button and charging port configurations, the new PanaVise PortaGrips are the latest product in the 20+ year history of PanaVise phone holders under the PortaGrip name. Whether you need the standard unit, the version with an AMPS mounting plate, or a long-reach telescopic mount, one of these PortaGrip Universal Phone Holders will fit your need. Features include: * Rubberized indexed grippers and foam-backed cradle won't scratch your device * Quick-release button for easy phone access * Vertical low-profile grips allow full access to touch screens * Side arms adjust from 2.25 in. to 3.75 in. width to fit nearly any phone * Ratcheted feet allow for access to data ports * PanaVise Tilt, Turn & Rotate = fully adjustable * Low-profile design minimizes mount behind phone * Powerful suction cup mounts to any smooth, non-porous surface. Easily move from vehicle to vehicle or stow for security * Multiple versions for maximum mounting solutions Get that cell phone out of your hand! Grab one of these PanaVise PortaGrip Universal Phone Holders from DX Engineering and make a secure place to put your phone!
( 1 )
$59.99
—
$64.99
DX Engineering Yagi Mechanical® Antenna Design Software Download
Developed specifically for the antenna building enthusiast, DX Engineering Yagi Mechanical® Antenna Design Software has been rebuilt from the ground up to display a greater range of accurate data while streamlining the design and planning of your beam antenna project. This completely new version provides greater flexibility in tubing types, simplified data entry, and automated measurement conversions. YM® now delivers 3D views, real-world mechanical strength and wind load calculations, as well as material costing and DX Engineering material links. Click the product listing to read the Overview, where a web link provides a free trial version download. Unlock the Full Version with the purchase of a Yagi Mechanical® software license here, which is delivered by e-mail, typically within two business days.
( 1 )
$69.99
VE2DX Electronics CT17B-5 V2 5-Port Icom Interface TrueCIV Data Hub
VE2DX Electronics CT17B-5 V2 5-Port Icom Interface TrueCIV Data Hub connects the interfaced transceiver's CI-V data stream to multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. The CT17B-5 V2 delivers perfect CI-V data to many types of tuners, band pass filters and more. From the legacy IC-735 to the newer IC-7300 and IC-9700, this hub interfaces all ICOM CI-V 3.5mm Remote port radios to all types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, all using simple 3.5mm patch cables. Powered via a USB C port, VE2DX Electronics Data Hubs make it easy to interface multiple devices to your Icom radio.
( 1 )
$94.99