Availability
12 Results Found For "never"
DX Engineering Tilt Base Antenna Mounting Systems
The patented* DX Engineering Tilt Base Antenna Mounting Systems enable an operator to raise or lower an antenna in seconds, while leaving the base of the antenna securely attached to the mounting plate and post. DX Engineering Tilt Bases make it easy to tune your vertical, repair, or simply lower your antenna to a safe horizontal position long before bad weather hits. One person can install, raise and lower, and service their vertical antenna with our stainless steel Tilt Base; just walk it up or down. The Tilt Base prevents potential accidents when climbing a step ladder to tune the antenna, especially on soft ground. This is an essential tool that has helped countless hams eliminate the possibility of personal injury and damage to their ground-mounted vertical antenna. There is no need to remove brackets from the support posts and you will never again have to lift the entire weight of the antenna in order to tilt it down or tilt it up. Nearly two decades of customer comments about DX Engineering Tilt Bases (and the Radial Plate) have included "it's a work of mechanical art" and another exclaimed "...it's so gorgeous I don't want to mount it outside, I want to hang it on the wall!" Year after year, users are thankful for the amazing ease of the Lift, Slide and Tilt action of this antenna mount for making antenna adjustments simple. Recently, DX Engineering customer Michael, KO4VVH, said "I wondered why this bracket had a cost over $60, but when it arrived today I was blown away. Heavy duty doesn't do this beast justice. Heavy plate stainless steel and it is one of the best mounts I've ever owned. It's big and heavy... Ultra heavy duty. I will mount it up to my Hustler 5BTV HF antenna so I can drop it to ground level for maintenance, adjustments and SWR tweaks. Thank you!" Precision-cut from 3/16 in. 304 stainless steel, these Tilt Base Antenna Mounts are virtually indestructible. They conveniently mount to the same ground pipe or tubing that you use for the antenna and Radial Plate. You could use lag screws or carriage bolts to mount the Tilt Base and the Radial Plate to a wood post, but typically they are securely mounted to a 2 in. max. OD pipe using optional SSVC-2P saddle clamps, displayed in "Required Parts". There are five versions of the DX Engineering Tilt Base Antenna Mounting Systems kit designed for a variety of HF antenna types: DXE-TB-3P: Specifically designed with included stainless steel hardware to mate with the antenna mounting bracket of the Hustler 4, 5 or 6 BTV vertical antennas. DXE-TB-4P: This Tilt Base model provides a mounting plate and clamps for tilting a customer supplied antenna support mast up to 1.75 in. OD and 10 ft. tall, for mounting elevated no-radial vertical antennas that weigh less than or equal to 20 pounds, and have a height of no more than 28 ft. The Vertical antennas and mast assemblies must be adequately guyed. Precautions must be taken when raising or lowering to avoid undue lateral stress on the tilt mechanism. The TB-4P is the tilt option for legacy DX Engineering vertical antenna models DXE-30VE-1, DXE-40-VE-1 and DXE-40VA-1. See the DXE-TB-7P below for the replacement COM-30VA and COM-40VA Monoband Vertical Antennas. DXE-TB-6P: Is specifically designed to mate to the antenna mounting bracket of the Hy-Gain AV-14AVQ (HGN-AV-14AVQ). This special tilt base mounting system includes stainless steel hardware that allows the AV-14AVQ to be closer to ground level for maximum performance. DXE-TB-7P: Is specifically designed to mate to the COMTEK 30 Meter (COM-30VA) and 40 Meter (COM-40VA) Vertical Antennas. DXE-TB-8P: Is specifically designed to mate to the COMTEK 20 Meter Vertical Antennas (COM-20VA) which may be tuned to resonate on one band, 20, 17, 15, 12, or 10 meters. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *U.S. Patent 7,432,875
( 60 )
$83.99
DX Engineering Ladder Line Surge Protector
Built by popular demand, the DX Engineering Ladder Line Surge Protector is ready to be placed in line with your balanced feedline antenna system! For many years, hams have asked us for a surge protector for use with their 300 ohm and 450 ohm ladder line fed antennas. Decades ago automotive spark plugs or arc gaps were used for shunting lightning pulses from balanced feeders to ground. But, you never really knew if they were going to work, if they really were continuing to work or if they were affecting the tuning. Here is the modern approach to providing surge protection for ladder line fed antennas. Made with components similar to those used in coaxial protectors, the DXE-LLSP uses much larger capacitors, resistors and gas discharge tubes on each leg of the ladder line to offer excellent surge protection capabilities at high SWR. These components are rated to handle 5 kW, so this protector will easily handle well over legal limit RF power at the high standing wave ratios expected on balanced line. Plus, the Ladder Line Surge Protector bleeds off the static charge that is collected on your antenna from wind driven sand, rain and snow! The DXE-LLSP Ladder Line Surge Protector is built to sustain multiple minor surges. As with any surge protector, there is no guarantee that a direct hit from lightning will be stopped. A replacement parts kit is also available to refurbish your pulse damaged protector: DXE-LLSP-RP Features of the DX Engineering Ladder Line Surge Protector: • Standard size NEMA enclosure; 4 x 4 x 2 in. nominal box dimensions; mounting tab holes on centers: 4.625 x 2.125 in. • Works with 450 ohm or 300 ohm Ladder Line and 600 ohm open-wire feeder • Internal Gas Discharge Tubes, Capacitors and Resistors • Can withstand multiple minor surges and shunts them to ground • Bleeds off static charge collected from wind driven snow, rain and sand • Weep holes allow any buildup of internal moisture to drain out • Handles well over legal limit at high SWR as expected on balanced line NOTE: The DXE-LLSP is an RF only device that does not carry DC voltage. Therefore it cannot be tested with a multimeter. It must be tested with an analyzer and a 300 ohm resistor, or by connecting an antenna feedline. If there is infinite SWR or no receive, the components have been damaged by lightning pulse energy and need to be replaced with the DXE-LLSP-RP Ladder Line Surge Protector Replacement Parts Kit. Order the DX Engineering Ladder Line Surge Protector for your balanced feedline antenna system today!
( 19 )
$85.99
Yaesu Handheld Li-Ion Battery Packs
Fast charging and lightweight, Yaesu Handheld Li-Ion Battery Packs are original equipment versions that look identical, and they fit and run your HT as designed. These Li-Ion packs are longer lasting than cheap substitutes and keep you on the air. Keep an extra pack charged up and on hand for those special event days with long hours of HT operations. You never know when that emergency will occur. When you need your handheld to work at full power, only trust original Yaesu Handheld Li-Ion Battery Packs from DX Engineering.
( 50 )
$59.99
—
$69.99
Yaesu Handheld Battery Cases
So the HT battery pack has bitten the dust, but you need to use that radio! Good thing you purchased one of these genuine Yaesu Handheld Battery Cases. Pop in your favorite type of AA cells and get back on the air! Buy almost anywhere in a pinch or stock up and use long shelf-life alkaline batteries in these holders for short term operations until you can recharge your HT battery pack. For some models, a set of AA rechargeable cells fresh from their separate charger may be used in a battery case. Rechargeable cells should only be used to run an HT in an emergency. Note: Never recharge rechargeable cells while in battery case. Some model HTs may not operate on the lower voltage provided by rechargeable cells. Consult your Handheld Transceiver manual. Yaesu Handheld Battery Cases from DX Engineering keep you and your HT ready for anything!
( 16 )
$59.99
DX Engineering Coaxial RF Connector Adapters
DX Engineering Coaxial RF Connector Adapters feature a wide selection of high-quality coaxial adapters. These adapters are used for changing connectors to different types and genders as well as connecting RF cables and equipment with different types of connectors. Type N, UHF Male (PL-259), UHF Female (SO-239), BNC, Type F and mini-UHF adapters, DX Engineering Coaxial RF Connector Adapters are available to complete your RF connections. You never know when you will need one, so order several today!
( 233 )
$63.99
DX Engineering Vertical Antenna Guying Kits
Some vertical antenna manufacturers indicate that their antennas do not need guying. During times of high winds or ice loading, however, some of these vertical antennas may sustain damage or fail altogether. With the small amount of effort needed to install one of these DX Engineering Vertical Antenna Guying Kits, the risk hardly seems worth taking. They feature a 4-point guying scheme that provides the best mechanical advantage to prevent wind stress, regardless of direction. The guying is intended for stability only and should never be depended on for primary support. DX Engineering Vertical Antenna Guying Kits are especially recommended for use with DX Engineering tilt bases, because just one of the guy ropes has to be loosened when you tilt the vertical down. The remaining guys help to stabilize the vertical in three directions when being raised. These kits have been designed to be used with ground-mounted quarter-wavelength vertical antennas, such as DX Engineering monoband and multiband verticals and the Hustler 4, 5, and 6-BTV models. Using the DX Engineering vertical antenna guying kits, you can install four guy ropes approximately halfway up the vertical antenna system to ground level and angled at approximately 45 degrees. Guying should be tightened just enough to permit the antenna to swing a few inches. The ends of the ropes are tied to the earth anchors that are screwed into the ground at about the same angle as the ropes. Tie the other ends of the ropes to the vertical antenna just above one of the antenna element clamps or traps (a guying ring is not required). Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. The DX Engineering Vertical Antenna Guying Kits are available in different lengths to fit your varying vertical antenna needs.
( 9 )
$61.55
—
$89.12
Sangean MMR-88 Emergency Radios
Sangean MMR-88 Emergency Radios are rugged digital AM/FM public-alert certified radios. No matter where you are an MMR-88 lets you listen to your favorite music, news and radio programs while keeping you safe with up to date weather forecasting and alerts. These are radios that call your attention to severe weather warnings. With a built-in adjustable LED Flashlight and loud emergency buzzer, you'll carry safety with you no matter where you go. MMR-88s feature a built-in high power 850mAh Lithium-ion rechargeable battery that can be charged using 1 of 3 charging methods; including the built in hand crank/dynamo power, USB port, or let mother nature charge it utilizing Sangean's state of the art solar panel. Not only can you charge this radio with 3 different options but you can also charge your USB compatible devices with the supplied USB A to Micro B Cable! Look at these great features: * Digital FM/AM Tuner * Receives all 7 NOAA Weather Channel and Reports * 19 Random Preset Stations (AM/FM Mixed) * Public Alert Certified Weather Radio * Charged by hand-crank dynamo/solar panel/DC in (Micro USB B Type) to its Rechargeable Lithium Battery * Illumination Lamp * Charging LED Indicator * Weather Alert LED Indicator * Adjustable LED Flashlight (Hi, Low, Blinking, Morse S.O.S. * Emergency Buzzer * Built-in Clock * 90 Minute Auto Shut Off * Built-in Speaker * Stereo Earphone Jack * Hand-Held Size * DC-out (5V/0.3A) USB A Type Socket for Charging Mobile Phone or MP3 Player * DC-in (5V/0.5A) Micro USB B Type Socket for charging * USB A to Micro USB B Cable and Hand Strap Included You never know when severe weather will hit. Be prepared to hear National Weather Service warnings anytime and anywhere with one of these Sangean MMR-88 Emergency Radios from DX Engineering!
( 2 )
$89.99
Eton Odyssey Multi-Band Bluetooth Emergency Radios
Eton Odyssey Multi-Band Bluetooth Emergency Radios are the ultimate companion for your outdoor adventures and emergency preparedness needs. With its comprehensive AM/FM/Shortwave/Weather band coverage, you can stay connected to broadcasts from around the world, ensuring you're never out of touch with the latest news and weather updates. These radios are packed with features to keep you safe and informed during emergencies. It comes equipped with NOAA Weather Alerts, ensuring you're aware of severe weather conditions in your area. Multiple power options are available, including the 2000mAh Rechargeable Lithium-ion Battery and high-efficiency solar panel charging will keep this radio ready when you need it most. You can also use 3 AAA alkaline batteries as a backup power source (not included). The Eton Odyssey offers versatility with a 5V 1.0A USB output for charging smartphones and other devices, ensuring you stay connected in any situation. The safe battery charging feature protects your device and battery life. For ultimate preparedness, the hand crank charging option is available making the Eton Odyssey perfect extended use. Just 4 minutes of hand cranking yields 10-15 minutes of music, weather updates and news, along with 1 minute of talk time. The Safe Battery Charging Protection Chip ensures the longevity of your battery. This emergency radio features a digital tuner and display for precise station selection and tuning. It also includes Bluetooth connectivity, making it an all-in-one entertainment and communication device. The IPX4 weather-resistant design ensures durability in various conditions, while the bright LED flashlight, LED beacon, and siren provide essential visibility and signaling in emergencies. Additional features include a DC power input via the included USB-C cable, an AUX-IN jack, headphone jack, alarm clock, and digital clock. The carabiner allows you to conveniently clip it to your belt or go-bag, ensuring it's always within reach. For added security, the SOS emergency beacon and siren are invaluable tools for getting help when needed. With its impressive array of features, this emergency radio is an indispensable tool for adventurers and a vital component of your emergency preparedness kit. Stay connected, stay safe, and stay informed with the Eton Odyssey Multi-Band Bluetooth Emergency Radios Additional Features and Specifications: Includes: ODYSSEY Radio, USB-C Cable, Carabiner, Owner's Manual - Reception- FM – 76 - 108MHz AM – 520 - 1710kHZ SW – 3.2 - 22MHz WB – 162.40 - 162.55MHz - Audio Output Power: 2W / 4W for Bluetooth - Output Voltage: 5V/1A - Battery: Built-in - 2000mAH 18650 Lithium Ion, or 3 AAA – Not Included - Speaker: 45mm, 4Ohm, 5W - Generator Power: 2.5W - Operating Temperature Range: 32 °F - 104 °F (0 °C – 40 °C)
Not Yet Reviewed
$99.99
SOTAbeams Antenna Lifting Kite
The SOTAkite is specifically selected to be used as an integral piece of a kite-borne antenna system. They are easy to fly and stable making them the perfect aerial-platform. Large enough to lift antennas with ease but small enough to remain easy to control, even in high winds. Available from DX Engineering, the Antenna Lifting Kite with Plus Pack includes SOTAkite, drogue tail, 200 ft. 55 kg. braided Dacron line on reel, instructions, kite bag, 5 meter Shock Cord, two versatile top insulators and two 470K-ohm static bleed resistors. Operating wind speeds of the SOTAkite are 5 to 18 mph, which is a good wide range for maximum utility. The nylon flying surface of the kite is 168 x 100 cm (55 x 34 in.) and is considered by the manufacturer to be suitable for users ages 14 and up. Safety First: In many localities there are restrictions on kite flying. Check your local and national regulations first. Kite antennas must never be used if there is any risk of lightning. They should never be flown within the proximity of the antenna wire length to electrical power lines, any structures, or public roadways. Click "More Detail" for a link to the manufacturer's kite antenna flying guide.
( 2 )
$89.99
DX Engineering MBVE-1UG Auto-Tune Vertical Antenna Upgrade Kits
With DX Engineering MBVE-1UG Auto-Tune Vertical Antenna Upgrade Kits, you may improve your DX Engineering MBVE-1 Vertical Antenna to an Auto-Tune model. You will enjoy an improvement in performance on your vertical antenna with the added convenience and efficiency of remote automatic tuning operation from 80 through 10 meters. Many Upgrade Kits include the automatic tuner, while some Upgrade Kits have all of the same parts, but without the tuner for those who already own the tuner. Your upgrade adds DX Engineering's exclusive new automatic antenna tuner mounting brackets that secure the tuner above the tilt base, well above the ground, for easy installation and access, away from potential damage by water and animals. Click on the DOCUMENTATION tab within any of the upgrade kits listed below and then on the CHARTS and GUIDES link to see all of the MBVE-1UG Auto-Tune Vertical Antenna Upgrade Kit offerings. Some of these antenna packages include the tuner and some include tuner mounting brackets and hardware only, for those who already own that tuner. All antenna upgrade packages include the antenna tuner mount, antenna element tubing extension and stainless steel hardware and clamps. As you know, using our ground-mounted vertical, you work DX as you never could with a low, horizontal dipole antenna! Upgrading to as MBVE-1 Series Auto-Tune Vertical Antenna can improve efficiency and extend your HF operations to new parts of the world. Like any HF vertical, upgrading your MBVE-1 vertical does require a good ground radial system. We highly recommend installing 32 radials, 65 ft. long are recommended. Fewer or shorter radials will work, but with some diminished results. A great ground-mounted vertical has the available space covered with 20 or more evenly spaced radials, each of any length from 15 to 65 ft. Do the work and you'll work the world! ™ DX Engineering MBVE-1UG Auto-Tune Vertical Antenna Upgrade Kits feature stainless steel brackets and hardware and automatic antenna tuners that allow you to access almost all HF bands with only one antenna solution. Upgrade your MBVE-1 series Vertical with one of these premium-quality Upgrade Kits from DX Engineering.
Not Yet Reviewed
$99.99
DX Engineering Phillystran Steel Tail Kits
DX Engineering Phillystran Steel Tail Kits provide the appropriate transition from non-metallic to metallic guying cable at the ground end of tower guying systems. Steel Tail Kits are available for Phillystran HPTG-4000I, -6700I and 11200I Guy Lines. What is the function of the steel tail? Here is the recommendation by Phillystran, the manufacturer of HPTG-I High Performance Tower Guy non-metallic guy lines: A steel tail is a length of EHS (Extra High Strength) steel guy line connecting the HPTG-I assemblies to the turnbuckle or guy anchor. The steel tail protects the HPTG-I assemblies from damage due to brush fires, lawn maintenance equipment or vandals. The steel tail length should be sufficient to get the bottom end of the HPTG-I assembly above arm's reach, or above brush tops (if located in a marsh or tall brush area). The HPTG-I should never pass through tree limbs or be allowed to rub against poles or trees. The steel tail allows for easier guy length calculations and serves as a guy tension monitoring point, as well as a safer area to attach guy grips during guy line installation and tensioning. Eliminating the hassle of buying a length of steel cable and obtaining a special tool to cut it, DX Engineering Phillystran Steel Tail Kits provide everything needed to isolate your tower's non-metallic guy cable from harm. Three different size kits are available for different tower guying requirements provided by Phillystran guy cables 4000I, 6700I and 11200I. Here are the items included in these innovative Steel Tail kits: - 12 ft. EHS steel guy line, Galvanized, in three kit sizes, 3/16 in., 1/4 in. or 5/16 in. - Porcelain Guy Line Strain Insulator, 502 or 504 depending upon kit size - Galvanized Steel Preform Dead End Big-Grips for EHS steel guy line, two per line - Heavy Duty Thimble, galvanized steel, appropriately sized for each kit - Cable Ties, UV protected Black, four, to secure installed Big-Grip ends Note: Phillystran guy line and Preform Dead End Big-Grips for Phillystran are not provided in this kit and must be ordered separately. DX Engineering Phillystran Steel Tail Kits provide Porcelain Guy Line Strain Insulators for the top end of the Steel Tail so that the galvanized steel Big-Grips for the Phillystran and for the EHS Steel Guy Lines do not touching and make RF noise. For three different size Phillystran guy line, HPTG-4000I, -6700I and -11200I, these kits are available exclusively from DX Engineering in 3-packs for each level of tower guying.
( 2 )
$79.99
—
$88.99
Hustler Antenna Replacement Parts
Hustler Antenna Replacement Parts allow you to keep your Hustler vertical performing at its peak. These Hustler antennas have been on the market for decades. Literally tens of thousands have been put in service around the world. Whether for routine maintenance or repair due to unfortunate damage, Hustler offers the replacement antenna parts that you need. DX Engineering stocks many Hustler Antenna Replacement Parts for your convenience. At each part, click "More Details" for specific application information.
( 106 )
$53.99
—
$57.99