Availability
41 Results Found For "day"
La Crosse Technology Wireless Weather Stations
La Crosse Technology Wireless Weather Stations are versatile, powerful, and affordable. Their weather stations use temperature and barometric pressure to define trends and forecast future conditions. Their wireless Weather Plus stations augment forecasts with additional features and capabilities to provide a wider range of environmental data. Wireless weather stations can, and do, monitor all manner of basic weather data. You can track outdoor temperature and humidity, dew point, barometric pressure, pressure trends and changes, and even rainfall with their Wireless Rain Center. The real beauty in the wireless nature of these stations is that you can place the sensors in their most appropriate locations and NOT worry about any wires or cables! Wireless weather stations may predict overnight low temperatures, display lunar phases, alert you to the day length from sunrise to sunset, suggest what to wear outside, and even display Atomic Time and date. Whether you have a mild interest in your local weather, or a burning passion for humidity and dew points, La Crosse Technology Wireless Weather Stations from DX Engineering provide the powerful weather-data and information-flexibility that you need!
( 5 )
$50.99
—
$99.99
DX Engineering UCGC-Z Universal Copper Grounding Clamps
DX Engineering Universal Copper Grounding Clamps, model DXE-UCGC-Z, are custom designed to provide a ground rod mounting solution for various types of lightning protectors commonly used for Amateur Radio. The "Z" design makes it easy to install and remove coaxial cable connectors. This ground rod clamp for surge protector mounting is ideal for permanent installations as well as for temporary installations, such as Field Day. The DXE-UCGC-Z Copper Grounding Clamp Features: - Mounts up to six protectors onto one ground rod - Fits common standard 5/8 in. through 3/4 in. diameter ground rods - Made from 1/16 in. thick Copper Alloy 110 for maximum conductivity -"Z" bends in the copper for easier installation and removal of coax connectors on protectors - Easy to assemble two-piece construction. Each plate is approximately 3-1/4 in. wide x 4-3/16 in. tall - Stainless Steel hardware is included: Four 1/4 in.-20 x 3/4 in. long hex head bolts, eight 1/4 in. flat washers, four 1/4 in.-20 Nyloc hex nuts - Using this copper clamp is faster and easier than building up the joint for an exothermic weld The DXE-UCGC-Z can easily mount up to six lightning protectors. The photo shows two DX Engineering and two PolyPhaser lightning protectors installed on a DXE-UCGC-Z mounted to a 5/8 in. diameter ground rod. Other lightning protection products can also be mounted, such as the DXE-IS-RCT Control Line Protector and Alpha Delta Lightning Protectors. Additionally, a solid copper strap from the station grounding bus bar may also be sandwiched between the copper plates of this clamp and the ground rod (not shown). An anti-seize compound such as JTL-12555 Jet Lube SS-30 Pure Copper Anti-Seize must be used on the threads to prevent galling or seizing of stainless steel hardware. All connections must be generously coated with a conductive joint compound to prevent moisture penetration and enhance conductivity. Properly weatherproofing coaxial cables and lightning protectors is important to ensure the longevity of the connection and maintain optimal performance. Prior to attaching the lightning protectors, install the coaxial cables to the lightning protectors and weather seal the PL-259 connectors using TES-2155 Temflex Rubber Sealing Tape with an overwrap of TES-06132 3M Super 33+ Vinyl Tape or 3M Scotch Super 88 Premium Vinyl Tape (TES-06143). These easily removable connector sealing tapes are now available in kits. The lightning protector bodies are not weatherproof and it is suggested to use a DX Engineering Weatherproofing Kits to permanently cover the body of the protectors. Some users have also suggested covering the entire assembly with a plastic food container or plastic trash bin As with all electronic equipment, take proper safety considerations. For example: Do not install if there is a storm anywhere in your area. Do not adjust or touch the grounding system equipment when there is a storm anywhere in your area. Make sure all power is removed before making any adjustments or working on any ground system or grounding components. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Complete your coaxial cable grounding installation with DX Engineering UCGC-Z Universal Copper Grounding Clamps.
( 40 )
$65.99
Mastrant Antenna Support and Guy Line Ropes
Mastrant Antenna Support and Guy Line Ropes are available in several sizes and strength ratings, perfect for support of wire antennas, vertical antennas and antenna masts, as well as support of Yagi booms and elements. Mastrant ropes are of the highest quality for strength and are UV-protected for extended longevity. MASTRANT-O is a highly reflective rope (bright orange plus braided reflective tape) based on long-term proven Polyester (Dacron) product line. It is designed for maximum visibility in public places such as Field Day and POTA activities. Like all Mastrant ropes, it is UV stable and resistant to all weather conditions. It has low weight, great abrasion resistance, great durability and is nonconductive (no effect whatsoever on your antenna). Moreover, in contrast to ropes made from aramid fibers (Kevlar, Vectran, Technora, Twaron), it has knot strength about 60 %. Mastrant-P and Mastrant-R Ropes are stronger than other synthetic ropes of the same size, made from proven modern polyester. Mastrant-Q is a new rope made from a blend of polyester and polypropylene, designed specifically for guying applications. It offers an excellent performance-to-price ratio and has a knot strength of approximately 60%. It replaces Mastrant-P in diameters of 6 mm (1/4 in.) and larger. Mastrant-S is a similar polyester/polypropylene rope, distinguished by its highly reflective strands for increased visibility. Mastrant-M is their highest strength rope with the Dyneema® DM20 core, a superior synthetic rope offering high performance at an affordable price. Very high strength, negligible elongation, very low weight, and great abrasion resistance are all attributes that make Mastrant-M the best rope for guying. Larger, stronger sizes of Mastrant-M are used in Europe and other parts of the world for tower guying. Durability and safety are of prime concern to ensure that an antenna installation remains fully operational for a long time. Antennas and guy lines are exposed to changing weather conditions, mechanical strain, UV radiation, humidity, and more. These non-conductive synthetic fibers have all the necessary qualities: high strength, negligible stretch but good flexibility, long life, low moisture collection, fast drying, a minimum bending radius adding the ability to tie knots, good UV radiation resistance, weather durability and resistance to acids and alkali. Conversely, steel guying wires are heavy, difficult to work with, and their strength deteriorates with time due to corrosion and general aging. Electrical conductivity of steel guys is an undesirable feature, as they interact with the antennas and adversely modify radiation patterns. Thanks to recent developments in synthetic materials, both amateur and professional users are changing over to non-conductive guys and ropes. Mastrant offers these products for a variety of applications, from thin support lines used for wire antennas and beams, to rope guys for supporting small and portable masts and vertical antennas. When you need quality rope to install, replace, or modify your antenna systems, consider Mastrant Antenna Support and Guy Line Ropes, now available from DX Engineering.
( 186 )
$54.99
—
$97.99
DX Engineering Lightning Rod Mast Mounts
The use of DX Engineering Lightning Rod Mast Mounts could protect your tower, antennas and station equipment from disastrous lightning damage. DX Engineering Lightning Rod Mast Mounts are 1/8 in. heavy-duty stainless steel clamps that will long outlast your steel tower. Their optional bolts (choose DXE-LRMM-FAST by combined mast and lightning rod diameters) are also high-quality stainless steel. Together, they are extremely durable clamps to keep your lightning rod in place. Lightning searches out the path of least resistance to ground. If that path is your tower, rotator and rotor bearings, antennas and coax, or the ground and electrical connections to your rigs, then that's where it will go. Providing a better path (one with very little resistance) is the key to keeping lightning outside the shack and limiting damage. When used with proper tower grounding, a heavy rotor-bearing bypass cable and installed coaxial surge protectors, a lightning rod above your antennas may save the day. Don't ignore proper grounding and lightning protection! Make a list of all the items you need to upgrade your station's lightning defense. Make sure a mast mounted lightning rod and DX Engineering Lightning Rod Mast Mounts are added to your list.
Not Yet Reviewed
$75.99
REZ Antenna Systems Z-25SS Telescopic Whips
REZ Antenna Systems Z-25SS Telescopic Whips are engineered for high-performance portable HF operations. Designed for demanding field use—including POTA, SOTA, Field Day, and other serious deployments, they offer exceptional performance, rapid setup, and maximum versatility. When paired with the Scout base, the Z-25SS functions as a resonant ¼-wave vertical from 30 through 6 meters. Add the Scout 4025 loading coil for easy tuning on 40 meters, or pair it with the Recon 40 for full 40–6-meter coverage. Pairing the Z-25SS with the Ranger 80 system enables operation from 80 through 6 meters. Rated for 1,000W PEP, these Z-25SS whips combine rugged durability, wide band coverage, and field-ready reliability—making them the antenna of choice for operators who demand maximum reach and performance in portable HF systems.
Not Yet Reviewed
$100.00
Yaesu Handheld Li-Ion Battery Packs
Fast charging and lightweight, Yaesu Handheld Li-Ion Battery Packs are original equipment versions that look identical, and they fit and run your HT as designed. These Li-Ion packs are longer lasting than cheap substitutes and keep you on the air. Keep an extra pack charged up and on hand for those special event days with long hours of HT operations. You never know when that emergency will occur. When you need your handheld to work at full power, only trust original Yaesu Handheld Li-Ion Battery Packs from DX Engineering.
( 50 )
$59.99
—
$69.99
REZ Antenna Systems Universal Mast Mounts
REZ Antenna Systems Universal Mast Mounts are the perfect solution for securely attaching the REZ Scout Base to any antenna mast with a diameter of 1.00 to 1.75in. Whether you're activating a park or setting up for Field Day, this mount provides a stable mast connection that will not move or rotate.
( 3 )
$75.00
Milwaukee REDLITHIUM USB 400 Lumen Neck Lights
Milwaukee REDLITHIUM USB 400 Lumen neck lights are bright, durable, and rechargeable. They provide 400 lumens of TRUEVIEW high-definition output, over 8 hours of runtime to keep you working all day, and two mode options to manage output and runtime, plus a battery gauge in the power button will always inform you how much power you have left before a recharge is needed. The neck lights have 130 degrees of vertical light head rotation for easy positioning and an ergonomic, sweat-resistant band for your comfort. Their IP54 ingress protection guards against dust and water, provides chemical resistance to harsh chemicals found on site or in the shop, and a drop rating of 6 ft., backed by Milwaukee's Limited Lifetime Warranty.
Not Yet Reviewed
$99.99
La Crosse Technology 14 in. UltrAtomic Analog Wall Clocks
La Crosse Technology 14 in. UltrAtomic analog wall clocks are the first Atomic clocks on the market that receive the new phase modulated enhanced WWVB broadcast signal, recently introduced by NIST. This advanced technology allows the radio time signal to "break through" barriers like cement walls that previous versions could not. This radio-controlled clock has greatly improved reception and reliability, making it a great addition to any office complex, school or home. This line of products is the first the market to be based on this enhanced broadcast, offering unparalleled reception. UltrAtomic clocks operate even in the harshest conditions, where the signal-to-noise ratio interferes with radio-controlled clock reception using the legacy AM signal broadcast. UltrAtomic technology digitally processes the received signal via an integrated circuit within the clock. It leverages the advanced modulation scheme and new data encoding. The reception reliability of the technology has been validated in the most challenging locations and scenarios and has been demonstrated successfully throughout all of North America. UltrAtomic clocks allow you to select any time zone with a custom setting. Now you can enjoy UltrAtomic accuracy, while viewing any time zone around the world. The new WWVB broadcast provided by the National Institute of Science and Technology (NIST) includes a notification for the daylight savings time transitions well ahead of when they are to occur. The UltrAtomic clock reads and stores this information and, at the appropriate instance, automatically advances the hands one hour in the spring and eleven hours in the fall (to move back one hour), even if the signal is not received on the day of the transition. * UltrAtomic time with manual set option * Barrier-resistant signal reception with dual antenna that is insensitive to orientation * Adjustable time and zone (24 hour World Time) from UTC+0h to -11h * Eco Mode extends battery life--turns second hand off from 11 pm to 5 am * Q-Mode (Quartz Mode) for manual time setting * Automatically updates for daylight saving time (with DST On/Off option) * 14 in. stainless steel frame bezel * Glass lens * Black metal hands and black numerals on white background * Low battery detection indicator--second hand stops at 6 * Powered by 2 or 4 high-quality "C" LR14 batteries (not included) for up to 3 or 6 years of operation in Eco Mode Order the La Crosse Technology model 404-1235UA-SS 14 in. UltrAtomic wall clock from DX Engineering!
( 2 )
$96.99
Unified Microsystems XT-4 MK2 CW Memory Keyers
Unified Microsystems XT-4 MK2 CW Memory Keyers are small, light-weight battery powered CW memory keyers that are perfect for Field Day, POTA, SOTA, DXpeditions, mobile and multi-operator scenarios. The clean design of the XT-4 MK2 will also look great in your shack!
( 6 )
$89.95
DX Engineering HF QRP Bandpass Filters
DX Engineering HF QRP Bandpass Filters are designed to tightly confine both transmitted and receive signals to one specific Amateur band, these filters significantly reduce out of band noise, resulting in a noticeably lower noise floor and improved weak signal reception. In multi operator contest or portable operations, they deliver the essential isolation needed to eliminate image and harmonic interference, ensuring clean mono band performance even in close quarters environments. Each filter features a sharp roll off just outside the band edges, providing exceptional rejection of adjacent band signals and maintaining maximum operating efficiency for QRP applications. Offered for the 80, 40, 20, 15, and 10-meter amateur bands, they install easily in line with the coax feedline using the BNC connectors provided on each end. With power ratings of 20 watts SSB and 5 watts digital, they are ideal for QRP enthusiasts participating in multi operator events such as Field Day, POTA, and SOTA.
Not Yet Reviewed
$69.99
DX Engineering Logo UltrAtomic® Wall Clocks
DX Engineering Logo UltrAtomic® Wall Clocks feature dramatically improved reception and reliability, to automatically set and keep time, even at daylight saving time changes. Excellent readability and attractive styling make this special DX Engineering 14 inch analog clock a great addition to any Amateur Radio station, office complex, school or home. The UltrAtomic receives the enhanced phase modulated WWVB broadcast signal introduced by NIST in 2012. This advanced technology allows the radio time signal to "break through" barriers like cement walls, unlike previous PWM only Atomic clocks. This is the DX Engineering version of the La Crosse Technology wall clock that was the first on the market to be based on this enhanced broadcast, offering unparalleled reception. UltrAtomic clocks operate even in the harshest conditions, where the signal-to-noise ratio interferes with radio-controlled clock reception using the legacy AM signal broadcast. UltrAtomic technology digitally processes the received signal via an integrated circuit within the clock. It leverages the advanced modulation scheme and new data encoding. The reception reliability of the technology has been validated in the most challenging locations and scenarios and has been demonstrated successfully throughout all of North America. UltrAtomic clocks allow you to select any time zone with a custom setting, especially UTC/GMT. Now you can enjoy UltrAtomic accuracy, while viewing any time zone around the world. The phase modulated WWVB broadcast provided by the National Institute of Science and Technology (NIST) includes a notification for the daylight savings time transitions well ahead of when they are to occur. The UltrAtomic clock reads and stores this information and, at the appropriate instance, automatically advances the hands one hour in the spring and eleven hours in the fall (to move back one hour), even if the signal is not received on the day of the transition. * UltrAtomic time with manual set option * Barrier-resistant signal reception with dual antenna that is insensitive to orientation * Adjustable time and zone (24 hour World Time) from UTC+0h to -11h * Eco Mode extends battery life--turns second hand off from 11 pm to 5 am * Q-Mode (Quartz Mode) for manual time setting * Automatically updates for daylight saving time (with DST On/Off option) * 14 in. stainless steel frame bezel * Glass lens * Black metal hands and black numerals on white background * Low battery detection indicator--second hand stops at 6 * Powered by 2 or 4 high-quality "C" LR14 batteries (not included) for up to 3 or 6 years of operation in Eco Mode
( 4 )
$89.99
DX Engineering Solid Copper Ground Wire Kits
DX Engineering Solid Copper Ground Wire Kits provide a dependable grounding solution for amateur radio stations in the home shack, during Field Day events, and for portable operations. Constructed from durable 6 AWG bare solid copper wire, these kits are available in 5, 10, 15, and 20-foot lengths. Each kit includes two 1/4-inch (0.250 in.) ring terminals and two 3/8-inch (0.375 in.) ring terminals for secure, easy-to-install connections.
Not Yet Reviewed
$54.99
On Sale
Milwaukee PACKOUT Coolers
Milwaukee PACKOUT Coolers have an impact-resistant molded base that you can connect with other PACKOUT system components via integrated locking cleats. The leak-proof food grade liner and dual layer insulation ensure that the cooler holds ice for up to 24 hours. These durable jobsite lunch coolers are constructed with tear-resistant 1680D ballistic material, heavy-duty zippers, and all-metal hardware so they can withstand harsh environments. The heavy-duty coolers feature an integrated tape measure clip that also works as a bottle opener and four storage pockets, enabling you to carry your food, beverages, and personal items to the job site each day.
Not Yet Reviewed
$84.97
$74.97
Chelegance JMAST-1800 Telescopic Aluminum Surveying Tripods
The Chelegance JMAST-1800 Telescopic Aluminum Surveying Tripods are sturdy tripods that allow for setup on uneven terrain. Each of the three legs extends to a total of 5.9 ft. and will allow for the legs to be placed up to 180 degrees from the center position of the tripod, allowing for stable setup on almost any terrain. Positive locking on the legs means that they will stay where you place them and with pointed tips ensure that the tripod will grip on most terrain. Collapsed, this mast is 3.5 ft. and weighs 6.17 pounds, making it perfect for Field Day or other portable operations. This tripod doesn't include a center mast and will accept a mast between 1 and 1.5 inches in diameter.
( 1 )
$99.99
REZ Antenna Systems 4-Band Scout Linked Dipole Kits
REZ Antenna Systems 4-Band Scout Linked Dipole Kits are designed for use with the REZ Antennas Scout Base, these DIY kits enable you to create a 4-band linked inverted V dipole antenna, perfect for portable operations like POTA, SOTA, and Field Day. Whether you're a seasoned operator or a newcomer to DIY antennas, these kits provide everything you need to build and fine-tune your own reliable, high-performance antenna.
Not Yet Reviewed
$65.00
DX Engineering TW Antenna Travel Bags
DX Engineering TW Antenna Travel Bags make your TW Antenna a perfect companion for Amateur Radio travel. Just organize any TW Antenna model (except TW-8080) into the handy spaces the bag provides and go! TW Antenna Travel Bags have these wonderful features: * 600-denier polyester cloth with PVC coating * Zippered main compartment has large U-shaped opening with dual zippers * Web handles with self-fastening handle wrapper reinforced at stress points * Adjustable and detachable shoulder strap with padded non-slip shoulder guard * Rustproof plastic hardware These bags will make traveling with your TW Antenna very convenient. Take DX Engineering TW Antenna Travel Bags to your favorite field locations. Whether on vacation, Field Day, SOTA or just heading "out there," your TW Antenna will travel safe and organized. Order yours from DX Engineering... today! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
( 2 )
$99.99
Rugged Radios Patrol Lapel Microphones
Rugged Radios Patrol lapel microphone kits are specifically developed to provide the best audio performance and durability. With their low-profile microphone and the ear-hugging earbud coil, the Patrol lapel microphone is a discreet and comfortable solution to being on the air all day. The included case provides easy storage to protect your equipment and maintain sanitary conditions. Features include: * Rugged, fiber braided cable * Quick-disconnect radio plug * Comfort-Fit semi-custom earpiece * Noise reflecting microphone * Loud and clear audio speaker
Not Yet Reviewed
$59.99
La Crosse Technology Atomic Projection Alarm Clocks
La Crosse Technology Atomic Projection Alarm Clocks eliminate the need to fumble for your phone in the middle of the night to see the time and temperature. La Crosse Technology's Atomic Projection Alarm Clocks will project the time, indoor temperature, outdoor temperature, or alternating time and temperature onto your ceiling or wall for easy viewing. With adjustable projection angle, four backlight level options and auto dim, you'll have just the right viewability for night or day. The La Crosse Technology Atomic Projection Alarm Clocks will automatically adjust for Daylight Saving time. Choose between a 12 or 24 hour time display, as well as the calendar year, month, and date. The display and the included wireless outdoor sensor have low battery indicators to let you know when it's time to change the batteries. Additional Features and Specifications: • 270° Manual Arm Rotation • Fixed Focus • Adjustable Brightness Control (4-levels, Plus OFF ) • 1.0 in. Time Digits • 12/24 Hour Time • Customizable Display for Calendar or Alarm Time • Atomic Self-Setting Time and Date • 3 Automatic Daylight Savings Time Options (AUTO/OFF/ON) • Seven Time Zone Selections (AST, EST, CST, MST, PST, AKT, HAT) • 4 languages (English, Spanish, French, & German) • Indoor and Wireless Outdoor Temperature Trend Arrows • Alarm with 10-minute Snooze Duration • Adjustable White Backlight with Auto Dim • 5 VDC Power Adapter Included • Requires 3 AAA Alkaline Batteries for power loss (not included) • TX141-Bv3 Wireless Temperature Sensor Requires 2 AA Batteries (not included) Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$54.99
DX Engineering HF Portable TW Antennas and Accessories
Preserving and building upon the legacy of this premier portable HF antenna line, DX Engineering is now the manufacturer and seller of TW Antennas! DX Engineering's acquisition of the products and designs of these unique HF portable and stealthy antennas brings easy access and simplified ordering to this line formerly known as Transworld. DX Engineering HF Portable TW Antennas and Accessories feature complete portable antenna packages and all of the individual components to build a custom stealthy system. Will you use these compact HF antennas as portables, fixed antennas, or both? Choose your own path to stealthy operations and to join in the fun of portable HF! Naturally stealthy, these compact HF vertical-dipole TW antennas feature a black finish that is excellent on fixed antennas in HOAs or where "CC & R" antenna restrictions preclude the installation of towers and easily visible HF antennas. Simply unfold the DXE-TW-BAS-BLK Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the optional 41 in. long permanent mounting post, DXE-TW-PMP, and operate! Note: Although a permanently-installed mounting pier (DXE-TW-PMP) is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements. For portable use, the lightweight foldable Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Quadrastand's gray fiberglass legs will give decades of rugged, dependable service. And since they're fiberglass, there's no chance of corrosion from contact with earth or sand. Think about equipping for your special operating event plans like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air) for backpacking and general camping with HF! A great Carry Case, DXE-TW-DXBAG, is available to make traveling with these antennas in your car or RV a snap. DX Engineering HF Portable TW Antennas and Accessories are available as mono-band or multi-band systems. Covering all five bands from 20 through 10 meters, DXE-TW-2010 Multi-Band Remote Switching Center Sections include a control console and cable and can be band-switched remotely in the shack and automatically by some transceivers. DXE-TW-2010L Multi-Band antennas can be band-switched manually. Plus, it's easy to change to the 80, 40 and 30 meter operations with DXE-TW-8080, DXE-TW-4040 or the DXE-TW-3030. Swap out each Band Box Center Post to change to operations on these different bands in a very simple manner. Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antennas available. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering HF Portable TW Antennas and Accessories are here to help you enjoy working stealthy HF at home or… anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
( 20 )
$91.99
DX Engineering Yagi Mechanical® Antenna Design Software Download
Developed specifically for the antenna building enthusiast, DX Engineering Yagi Mechanical® Antenna Design Software has been rebuilt from the ground up to display a greater range of accurate data while streamlining the design and planning of your beam antenna project. This completely new version provides greater flexibility in tubing types, simplified data entry, and automated measurement conversions. YM® now delivers 3D views, real-world mechanical strength and wind load calculations, as well as material costing and DX Engineering material links. Click the product listing to read the Overview, where a web link provides a free trial version download. Unlock the Full Version with the purchase of a Yagi Mechanical® software license here, which is delivered by e-mail, typically within two business days.
( 1 )
$69.99
On Sale
Milwaukee Jobsite Backpacks
Milwaukee's jobsite backpacks are designed with the professional tradesmen in mind and built with durable 1680-denier material and an impact and water-resistant molded base. The backpacks feature a padded, breathable load-bearing harness for ultimate comfort and jobsite performance, as well as a laptop pocket for the protected storage of laptops and tablets. A fold-down front pocket allows for easy storage of large items such as fish tapes, drills, and extension cords, while exterior daisy chains allow for additional clip-on storage. This combination of extreme durability and functionality confirms Milwaukee's commitment to providing you with an innovative, durable solution on and off the jobsite. Key features: * 35 pockets for organizing tools * 1680-denier ballistic material construction * Laptop sleeve holds laptops up to 15.6 in. * Attachment strap—allows bag to be easily and securely attached to vertical handles * Impact-resistant molded base protects contents and allows backpack to stand upright * Load bearing harness is padded and breathable for all day comfort * Bulk pocket offers quick access to items such as fish tapes and power tools
Not Yet Reviewed
$109.97
$94.97
Sunex Tools Long Reach Plier Sets
Sunex Tools long reach plier sets contain different tools to make your work more efficient—including a straight nose and a variety of angled noses. The plier sets are offered in multiple lengths. All long reach pliers are made from carbon steel with induction-hardened edges and are fitted with a cushioned grip so you can work comfortably all day long.
Not Yet Reviewed
$63.99
—
$81.99
West Mountain Radio RIGblaster Nomic Digital Mode/Rig Control Interfaces
West Mountain Radio RIGblaster Nomic Digital Mode/Rig Control Interfaces are small, simple, rugged, and inexpensive sound card interfaces--perfect for portable use or temporary setups such as Field day or DX-peditions. Advanced digital modes are becoming much more common. Don't be left behind as others grasp at the digital age. Grab one of these West Mountain Radio RIGblaster Nomic Digital Mode/Rig Control Interfaces from DX Engineering and stay up on all of the latest modes! Check these quality features: * Can be used with almost any make or model microphone and most model radios, no matter what brand * Any radio that has an 8-pin round screw-on microphone connector * Any radio that has an RJ-45 modular telephone-style connector * Any radio with RJ25 6-wire microphone connector will work with the purchase of an optional FT100 style 6-wire modular microphone cable * Any radio with 4-pin round microphone connector will work with the purchase of a optional 4-pin microphone cable * Supplied with both a standard DB9 RS232 serial cable and USB cable interface (supported for Mac (OS9,10) for Linux or Windows (98SE--Vista 32 and 64 bit)! May be used on old or new computers with your choice of USB or RS232 DB9 serial * No external power supply necessary, so it is great for portable or QRP operation * Great simple and inexpensive choice for a dedicated Internet link with the EchoLink system * Properly matched and RF-suppressed audio for your radio * Fully isolated transmit audio and PTT keying, unlike other interfaces that have little or no isolation * Easier hookup thanks to our fully isolated audio and computer keying circuits * Positive and fully automatic PTT control supported almost 100 ham programs, no illegal or spurious signals, due to built-in sound card VOX operation Note: For additional product information, please look at the files under the "Documentation" tab.
( 9 )
$69.95