Availability
18 Results Found For "hex"
Wera Tools 3950 Hex-Plus Stainless Steel L-Key Sets
Wera 3950 Hex-Plus stainless steel key sets are intended for use with stainless steel screws. They are made from a specially developed stainless steel to ensure that they have the necessary hardness and rigidity required for workshop use. Since any wear debris produced by the key is also made from stainless steel, the problem of extraneous rust on stainless steel screws is eliminated. The stainless steel is also extremely corrosion resistant, making it suitable for areas that are regularly subjected to high levels of humidity. Wera's unique Hex-Plus system uses a head geometry that guarantees longer life for both screws and tools, whilst providing increased torque. This is achieved by the hex key having increased surface contact with the screw, which reduces the notching effect inside the socket. A ball-shaped head at one end provides the flexibility for "off angle" applications. Each tool is color-coded for easy tool identification and comes in practical clip fastener for secure holding.
Not Yet Reviewed
$76.99
Wera Tools 967 Black Laser L-Keys
The Wera 967 Series L-keys are ideal because they feature an optimized geometry of the original TORX profile—for transfer higher levels of torque. The L-keys come with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The Black Laser surface treatment provides outstanding corrosion protection and a long service life. The Wera "Take It Easy" Tool Finder System with color-coding according to profile and size provide for easy identification and tool selection. L-keys come in a clip fastener made of wear-free material for secure storage for all the L-keys.
Not Yet Reviewed
$56.99
—
$58.99
Wera Tools 3967 Stainless Steel L-Keys
This set of high-quality Wera 3967 stainless steel L-keys are intended for use for internal TORX screws. They are very corrosion-resistant due to ice-hardened stainless steel material of the L-key, avoiding transmission of extraneous rust in stainless steel screw connections. With holding function on the long arm: the clamping force resulting from the surface pressure between the output tip and the screw profile holds the screws securely on the tool—with extra-long arm for working in a low position. The grip-friendly hose jacket facilitates screwdriving even at low temps. The L-keys feature Wera's "Take It Easy" Tool Finder System—with color-coding by size and come in a practical clip fastener for secure holding of the L-keys together at the same time and for also allowing easy removal.
Not Yet Reviewed
$87.99
Sunex Tools Hex Drive Impact Sockets
Sunex Tools hex drive impact sockets are offered as sets or individually in several SAE and metric sizes. Stubby design hex bits are also available to fit into tight areas. Each socket is machined from CR-MO alloy steel and finished with black oxide for long life. Order the style, size, and quantity needed for your toolbox; multi-piece sets include a heavy-duty storage case.
Not Yet Reviewed
$54.99
—
$94.99
DX Engineering LRMM Fasteners
DX Engineering LRMM Fasteners are designed to be the perfect match for our DXE-LRMM heavy-duty stainless steel lightning rod mast mounts. These stainless steel fastener kits provide the threaded rods, nuts, washers, and lock washers you'll need for lightning rod mast mount clamp installation. Choose the length of fasteners you need for installation based on mast and lightning rod diameters. These DX Engineering LRMM Fasteners are durable and weather resistant stainless for extended life. Order today!
Not Yet Reviewed
$50.99
Hustler Antenna Replacement Parts
Hustler Antenna Replacement Parts allow you to keep your Hustler vertical performing at its peak. These Hustler antennas have been on the market for decades. Literally tens of thousands have been put in service around the world. Whether for routine maintenance or repair due to unfortunate damage, Hustler offers the replacement antenna parts that you need. DX Engineering stocks many Hustler Antenna Replacement Parts for your convenience. At each part, click "More Details" for specific application information.
( 106 )
$52.99
—
$57.99
DX Engineering Utility Enclosure Kits
DX Engineering Utility Enclosure Kits are ideal for the outdoor mounting of many types of lightning protectors or other equipment. This enclosure and grounding plate kit accommodates coaxial protectors with a flange mount or bracket so connectors are parallel with the grounding plate. (Bulkhead protectors that mount the connector through a grounding panel cannot be used.) DX Engineering DXE-UE-2P Utility Enclosure kits are manufactured from weather-resistant, high-impact thermoplastic material that protects the inside components against rain and directed water spray. The housing and wire entrance grommet materials used in the enclosure are fire-retardant and UV-stabilized and resist degradation from weathering, environmental contaminants, chemical fertilizers, and insecticide sprays. The exterior of the housing may be painted with latex or oil base paints if needed to help blend into the location. Because these kits have many potential applications, no holes have been drilled in the enclosure. However, mounting holes have been pre-drilled in the aluminum mounting plate. Four of the six sheet metal screws are included to secure the mounting plate to the enclosure; the other two sheet metal screws are for mounting the copper strap clamp to the mounting plate. Watertight feedthrough couplers mount to the top of the enclosure; drilling or cutting with a hole saw is required. Eleven port openings exist in the bottom--two are large for conduit coaxial entry/exit, and nine are smaller for coaxial cable, rotor cable, Telco lines, and more. All openings are sealed by a weathertight foam insert. NOTE: The DXE-UE-2P accommodates coaxial protectors that have a Flange Mount bracket, or those that work with an accessory bracket, to mount the connectors parallel with the grounding plate. Bulkhead Mount protectors that place a connector through the grounding plate cannot be used. These kits include: * 13 in. W x 14 in. H x 4 in. D enclosure (11-1/2 in. W x 11 in. H x 3-1/8 in. D) * 6 stainless steel hex washer head slotted sheet metal #8 x 1/2 in. screws * 8 in. W x 11.0 in. H x 1/8 in. D pre-drilled 6061-T6 aluminum mounting plate * Four weathertight coaxial cable feedthrough couplers, ideal for most RG8U or RG-213 sized coaxial cable * One 2 in. x 1/2 in. x 1/8 in. thick copper strap clamp with two drilled holes Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Provide proper protection for your weather-sensitive connections. Use DX Engineering Utility Enclosure Kits to supply the environmental safeguard you need!
( 79 )
$92.99
DX Engineering UCGC-Z Universal Copper Grounding Clamps
DX Engineering Universal Copper Grounding Clamps, model DXE-UCGC-Z, are custom designed to provide a ground rod mounting solution for various types of lightning protectors commonly used for Amateur Radio. The "Z" design makes it easy to install and remove coaxial cable connectors. This ground rod clamp for surge protector mounting is ideal for permanent installations as well as for temporary installations, such as Field Day. The DXE-UCGC-Z Copper Grounding Clamp Features: - Mounts up to six protectors onto one ground rod - Fits common standard 5/8 in. through 3/4 in. diameter ground rods - Made from 1/16 in. thick Copper Alloy 110 for maximum conductivity -"Z" bends in the copper for easier installation and removal of coax connectors on protectors - Easy to assemble two-piece construction. Each plate is approximately 3-1/4 in. wide x 4-3/16 in. tall - Stainless Steel hardware is included: Four 1/4 in.-20 x 3/4 in. long hex head bolts, eight 1/4 in. flat washers, four 1/4 in.-20 Nyloc hex nuts - Using this copper clamp is faster and easier than building up the joint for an exothermic weld The DXE-UCGC-Z can easily mount up to six lightning protectors. The photo shows two DX Engineering and two PolyPhaser lightning protectors installed on a DXE-UCGC-Z mounted to a 5/8 in. diameter ground rod. Other lightning protection products can also be mounted, such as the DXE-IS-RCT Control Line Protector and Alpha Delta Lightning Protectors. Additionally, a solid copper strap from the station grounding bus bar may also be sandwiched between the copper plates of this clamp and the ground rod (not shown). An anti-seize compound such as JTL-12555 Jet Lube SS-30 Pure Copper Anti-Seize must be used on the threads to prevent galling or seizing of stainless steel hardware. All connections must be generously coated with a conductive joint compound to prevent moisture penetration and enhance conductivity. Properly weatherproofing coaxial cables and lightning protectors is important to ensure the longevity of the connection and maintain optimal performance. Prior to attaching the lightning protectors, install the coaxial cables to the lightning protectors and weather seal the PL-259 connectors using TES-2155 Temflex Rubber Sealing Tape with an overwrap of TES-06132 3M Super 33+ Vinyl Tape or 3M Scotch Super 88 Premium Vinyl Tape (TES-06143). These easily removable connector sealing tapes are now available in kits. The lightning protector bodies are not weatherproof and it is suggested to use a DX Engineering Weatherproofing Kits to permanently cover the body of the protectors. Some users have also suggested covering the entire assembly with a plastic food container or plastic trash bin As with all electronic equipment, take proper safety considerations. For example: Do not install if there is a storm anywhere in your area. Do not adjust or touch the grounding system equipment when there is a storm anywhere in your area. Make sure all power is removed before making any adjustments or working on any ground system or grounding components. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Complete your coaxial cable grounding installation with DX Engineering UCGC-Z Universal Copper Grounding Clamps.
( 40 )
$65.99
DX Engineering RSR-891 Radio Side Rails
DX Engineering RSR-891 Radio Side Rails are custom designed to provide protection and attachment possibilities for the popular Yaesu FT-891 mobile transceiver. They guard the front and rear panels whenever the radio is used for portable operations. Radio Side Rails are very sturdy, made from a high strength but lightweight impact-resistant black polymer. The rails serve as handles at the front, flared outward to retain normal access to the controls. Their curved shape at the back panel makes it easier to slip the transceiver into a backpack, and they are ideal for POTA activations as well as casual portable activities. Radio Side Rails feature the appropriate cutouts for ventilation and connections, and specialized contours that facilitate quick and easy hook and loop strap mounting of an automatic antenna tuner or other accessory. Each kit includes four M4 thumb screws and four M4 Hex Socket Head Screws and a hex wrench, so Radio Side Rail attachments can be temporary or long-term. Extra protection is provided by the included eight rubber bumpers that are user installed into the four recessed holes on the inside surfaces of each side rail before attachment to the radio. NOTE: The torque specification for the M4 screws and thumb screws is a maximum of 10 inch-pounds. It is crucial not to exceed this specification, and use only the provided fasteners, as they have been specifically selected to prevent internal damage to the transceiver.
( 7 )
$79.99
Hustler Stainless Steel Springs with Coupling Stud
Hustler stainless steel springs with coupling stud are designed to fit the bottom position on vertical masts. They feature protective spring caps, an exclusive hex nut tightening system, and a copper braided center conductor to prevent detuning.
( 5 )
$65.99
Hustler 30 Meter Add-On Kits
Hustler 30 meter add-on kits modify your Hustler 4-BTV or 5-BTV antenna for 30 meter operation. These add-on kits replace the original 56 in. 40 meter tube with a 30 meter trap and 2 shorter tubes. The 3 and 6-element spider assemblies are also eliminated from your antenna. Complete instructions are included to ease installation.
( 28 )
$94.99
DX Engineering Super Duty Saddle Clamps
DX Engineering set new standards over ten years ago with the introduction of the industry's best clamps for mounting antennas and element tubing. DX Engineering Super Duty Saddle Clamps are available to fit 2.00, 2.50 or 3.00 inch OD tubing with ultimate gripping power. Commercial and industrial engineers and installation technicians all over the world have discovered a diverse range of applications for DX Engineering Super Duty Saddle Clamps. Super Duty Saddle Clamps are designed to be used where maximum torque handling is required on aluminum, steel or stainless steel tubing. Conceived for use by builders of large and heavy Yagi antennas and Log Periodic arrays, these clamps are made in sizes that securely fit the outside diameter of tubing for mounting to a flat plate or surface. Their wider gripping surface equals superior clamping power! Perfect for antenna construction and mounting, or wherever standard U-bolt saddle clamps and other torque-control products have proven inadequate, Super Duty Saddle Clamps provide maximum grip on booms, masts and element tubing. Unlike stamped or machined-type clamps, Super Duty clamps are cast from a rugged aluminum that grips tubing with a special textured surface and are sized for an incredibly secure fit that resists torque, wind and weather. Super Duty Saddle Clamps include two cast aluminum saddles (two halves) and a stainless steel reinforcement plate for high strength and superior corrosion resistance. Due to the wide diversity of clamping applications where Super Duty clamps are beneficial, mounting hardware is NOT included. However, a complete line of Armor-Coated and Stainless Steel Hex Bolt Hardware Sets are available for top performance in most mounting applications. Click "More Detail" to see additional information. Super Duty clamp mounting applications on a 1/4 in. plate require a bolt set, as indicated in the chart linked in the Documentation tab on the part detail page. Our tradition of innovation continues with the addition of narrower solid saddle clamps, our DX Engineering Heavy Duty Saddle Clamps, available to fit tubing with Outside Diameter (OD) inch-sizes of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Plan your next project with the best clamps available... period. DX Engineering Super Duty Saddle Clamps are ready to provide superior performance for your antenna, mast or other tubing mounting application.
( 7 )
$53.99
—
$61.99
DX Engineering Mast Top Mounting Plate
DX Engineering Mast Top Mounting Plate DXE-MTMP is a multi-purpose 16 x 5.1 inch (406.4 x 129.5mm) aluminum plate, 0.25 inch (6.35mm) thick, with a long edge flange bend 1.5 inch (38mm) deep for reinforcement. It is drilled for specific DX Engineering Stainless Steel V-Bolt Saddle Clamps and U-Bolt Saddle Clamps. A total of four clamps are required, which are sold separately for flexibility. This versatile, rugged plate and the optional clamps combine to add a strong extension mast above and in line with the original larger mast. This plate makes it easy to add a mast top antenna, electronic device or a strut tube for a boom support truss above a directional antenna. The DXE-MTMP mounts a smaller, short piece of tubing with a 1.000 to 1.500 inch (25.4 to 38.1mm) OD (outside diameter) above a larger mast or mounting tubing or pipe of either 1.00 to 2.00 inch (25.4 to 50.8mm) OR 2.375 to 3.000 inch (60.3 to 76.2mm) OD. This is the mounting plate now supplied with the DX Engineering XB-5 Hex Beam HF Antenna, DXE-XB-5-MMK. The DXE-MTMP can be used to remount an existing Hex Beam, and it is sold here separately for alternative clamp choices. As shown in the images, the DXE-MTMP reinforced plate has two pairs of upper holes with 6 in. (152.4mm) vertical spacing to use either of these DX Engineering Saddle Clamps: Two DXE-SSVC-150P for an upper steel mast mounting a range of 1.00 to 1.50 in. (25.4 to 38.1mm) OD, OR Two DXE-SAD-150A for aluminum or steel tubing that is exactly 1.500 in. (38.1mm) OD. Two lower pairs of holes also have 6 in. (152.4mm) vertical spacing. Use either of these V-Bolt Saddle Clamps: Two DXE-SSVC-2P for a 1.00 to 2.00 in. (25.4 to 50.8mm) OD steel mast, OR Two DXE-CAVS-2P for 1.00 to 2.00 in. (25.4 to 50.8mm) OD aluminum mast, OR Two DXE-SSVC-3P for a 2.375 to 3.000 in. (60.3 to 76.2mm) OD steel mast. Each mast requires about 8 in. (~200mm) of clamping length. Internal reinforcement of aluminum tubing or double wall thickness is encouraged. NOTICE: A total of FOUR DX Engineering Saddle Clamps are required, two for each steel or aluminum mast tubing or pipe. Other brand general hardware u-bolts will not fit this plate. Holes are drilled for the specified DX Engineering Saddle Clamps only. The user is responsible for appropriate and safe mechanical installation. No data is available for loading strength or suitability of use.
Not Yet Reviewed
$50.99
On Sale
CHANNELLOCK 94-Piece Mechanic's Tool Sets
There is nothing more important to a mechanic than tools. CHANNELLOCK 94-piece mechanic's tool sets are perfect for the work you do. So, why not choose the legendary strength and reliability of CHANNELLOCK? All of the tools stay in place in their durable, protective case when you lug them around. You don't have to look for your sockets--they are all laid out and organized. Choose the set that's perfect for the work you do. Contents include: * 3/8 in. 45-tooth quick-release ratchet * (16) 1/4 in. sockets * (11) 3/8 in. sockets * 3 in. extension * Reducing adapter * Magnetic bit driver * 30 Phillips, slotted torx, pozi, square, and hex driver bits * 10 SAE and metric nut driver bits * SAE and metric hex keys
Not Yet Reviewed
$69.95
$62.95
WiMo Transceiver Lifting Handles
WiMo Transceiver Lifting Handles let you lift your expensive transceiver and set it down vertically, without risking damage to the rear panel connectors. Available for a limited number of popular transceivers, these black powder-coated strong metal handles are available in two styles. Angled handles flair out, away from the controls for a better grip. Straight handles allow equipment to be set side-by-side. All versions of the WiMo lifting handles come with mounting screws. The FT-710 version of the lifting handles are angled on the front and have a cutout for the SD Card slot. The Universal version of the lifting handles are straight. Set your transceiver face up on the floor or desktop without worry. Order WiMo Transceiver Lifting Handles from DX Engineering
( 41 )
$75.99
Leatherman Skeletool Multi-Tools
At a mere five ounces, the Leatherman Skeletool multi-tools have a stainless steel combo blade, pliers, bit driver, removable pocket clip, carabiner, and bottle opener.
Not Yet Reviewed
$89.95
—
$99.95
Wera Tools Kraftform Micro Series Screwdriver Sets
Wera Kraftform Micro Series screwdriver sets are just the tools for precision mechanical work. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque, as well as precision zone for the right angle for adjustment work. The Wera black point tip on the screwdrivers offer high corrosion protection and an exact fit. Some sets include a practical rack for tidy storage of screwdrivers or a protective case or tool belt pouch. Highlights and features: * Multi-compartment Kraftform Micro handle offers fast ergonomic screwdriving * The Wera black point tip offers an exact fit and optimum corrosion protection * Each screwdriver features Wera "Take It Easy" color coding accordingly to profile and size for easy tool selection * Swivel cap provides rapid twisting motion * Anti-roll feature at base of screwdrivers keep them from rolling away on work surfaces * Excellent tools for electricians, opticians, precision mechanics. jewelers, or IT hardware fitters
Not Yet Reviewed
$57.99
Wera Tools Kraftform Kompakt 60 RA Pistol Screwdriver with Bit Sets
Wera offers multi-piece sets that include Kraftform Kompakt 60 RA Pistol screwdriver with bits designed to deliver high torque via its pistol format to increase leverage. The compact tool with multi-component Kraftform pistol handle provides users with high working speeds and ergonomic screwdriving, and feature an integrated bit magazine in the handle. The Kraftform Kompakt 60 RA pistol screwdriver with bits come in a practical tool pouch and are suitable for both manual and power tool operations. Key features: * Includes one holder 816 RA Kraftform tool with ratchet function * Tough viscous bits come in a storage tool pouch * Fine-pitched teeth for a small return angle; switchover ring (right, fixed, left) * Maximum torque of up to 50 Newton meters * Rapidaptor technology for low-fatigue working and rapid bit change; magnetic * Can also be used directly with a power tool * Multi-compartment Kraftform pistol handle for greater leverage with anti-roll feature; multi-component with Rapidaptor technology * Ratchet function * Smooth hard zones for high-speed turning—soft grip zones for high torque transfer
Not Yet Reviewed
$86.99