Availability
9 Results Found For "noise"
InnovAntennas 50MHz 6-Element LFA3 Low Noise Yagi
InnovAntenna 50MHz 6-Element LFA3 Low-Noise Yagi offers excellent performance across the important 50.0 – 50.5 MHz weak signal section of the 6 meter band. This Loop Fed Array Yagi is a full size beam with a 22.4 ft. boom, and it offers forward gain of near 12dBi and an amazing front-to-back of 29dB. This rugged 6 element LFA3 third generation beam features a bent reflector for more consistent impedance, pattern and performance. The Loop Fed Array has a direct-feed 50-ohm feedpoint with no matching losses. G0KSC LFA Yagis are a major step forward in the development of the Yagi Antenna, providing an ultra low-noise "front-end" for any advanced 50 MHz radio. Their well suppressed side lobes in both H and E planes provide excellent side and rear rejection of unwanted signals and noise, making this model ideal for locations with high levels of RF noise. The InnovAntennas 6-element LFA3 Yagi antenna is made to serve in any conditions, with an strong square aluminum tubing boom that is 1.50 in. (38mm) by 0.078 in. (2mm) wall thickness. Tapered elements consist of 0.50 inch (12.7mm) element centers and 0.375 in. (9.5mm) element end sections. Fully insulated elements ensures continuous, high performance in all weather conditions for many years to come. The boom-to-mast bracket accommodates up to a 2-inch (50mm) mast for this horizontally polarized 6-element LFA3 Low Noise Yagi antenna. For the 6-meter enthusiast who wants to beat the noise, enjoy great gain and front-to-back performance, this 6-element LFA3 is ready to serve you well on 50MHz.
Not Yet Reviewed
$619.99
InnovAntennas 50MHz 7-Element LFA-HD Low Noise High Performance Yagi
InnovAntenna 50MHz 7-Element LFA-HD Low Noise Yagi offers amazing performance for its price for the critical 50.0 – 50.4 MHz weak signal section of the 6m band. This "Loop Fed Array" Yagi is a full size beam with a 29.2 ft. boom length and it offers great forward gain of 12.8dB and an incredible front-to-back specification of 43.3dB! This rugged LFA-2 second generation 7 element beam features a direct-feed 50-ohm feedpoint, no matching losses and excellent rejection of unwanted signals and noise. It's well suppressed side lobes in both H and E planes make this model ideal for very noisy city locations. The InnovAntennas 7-element LFA-HD Heavy Duty Yagi antenna is truly made to survive harsh weather conditions, with a rugged square aluminum tubing boom that is 2 in. (50mm) at the center, tapering to 1.77 in. (45mm) and 1.58 in. (40mm) at the ends, with each section a 0.078 in. (2mm) wall thickness. Tapered elements consist of oversized 0.63 inch (16mm) element centers and 0.51-inch (13mm) element end sections, both with 0.078 in. (2mm) wall thickness, the same as the boom. Fully insulated elements ensures continuous, high performance in all weather conditions for many years to come. The boom-to-mast bracket accommodates up to a 2-inch (50mm) mast and a Kevlar single-line truss support system is provided with this horizontal polarized 7-element LFA-HD Yagi antenna. A capable and accurate tower-mounted rotator is required. For the 6-meter enthusiast who wants to beat the noise, enjoy great gain and incredible front-to-back performance, all for a great price, THIS 7-element LFA-HD is one of the most exciting 50MHz Yagis on the market!
Not Yet Reviewed
$715.99
InnovAntennas 50MHz 6-Element LFA-MAX Low Noise Yagi
InnovAntenna 50MHz 6-Element LFA-MAX Low-Noise Yagi is about 3 ft. shorter than other 6-element 6 meter beams but has only 0.7dB less forward gain! It offers excellent performance across the important 50.0 – 50.4 MHz weak signal section of the 6m band. Even though this Yagi has boom only 19.16 ft. long, it produces a forward gain of nearly 11.2dBi and an incredible front-to-back of 31.5dB. This Yagi has a Bent Reflector system designed to enhance SWR bandwidth and front-to-back. And it features a direct-feed 50-ohm feedpoint which eliminates matching losses and is ready to weather severe conditions, with an strong square aluminum tubing boom that is 1.57 in. (40mm) by 0.078 in. (2mm) wall thickness. Tapered elements consist of oversized 0.63 inch (16mm) element centers and 0.51-inch (13mm) element end sections, both with 0.078 in. (2mm) wall thickness. Fully insulated elements ensures continuous, high performance in all weather conditions for many years to come. The boom-to-mast bracket accommodates up to a 2-inch (50mm) mast for this horizontally polarized 6-element LFA-MAX Low Noise Yagi antenna. There are a lot of us... aspiring 6-meter hams in the city where noise is a problem, who want a beam with great gain and amazing front-to-back performance. But space and money is tight? The InnovAntennas 6-Element LFA-MAX is ready!
( 1 )
$699.99
InnovAntennas 144MHz 20 Element X-Pol LFA Low Noise High Performance Yagis
InnovAntennas 144MHz 20 Element X-Pol LFA Low Noise Yagis offer excellent performance in the 143.85 to 145.36 MHz This Loop Fed Array Yagi is a full-size beam with 19.02 foot boom, featuring 14.82 dBi of forward gain and a front to back specification of 39.1 dB. Designed by G0KSC, this LFA Yagi is a step forward in the design of yagi antennas, providing an ultra-low noise "front-end" for today's modern 144MHz radios. This rugged 20 element (10 horizontal and 10 vertical) features a 50-ohm feedpoint so there are no matching losses. The InnovAntennas 20-element X-Pol Yagi is built to withstand harsh weather conditions, with 1.5 x 1.5 in. (40x40mm) square aluminum tubing for the boom and .25 in. (6mm) aluminum tubing for the passive elements; the active elements are .5 in. (13mm) in diameter. Stainless Steel hardware is used throughout the antenna to ensure years of trouble-free service. The boom-to-mast bracket accommodates up to a 2-inch (50mm) mast. Specifications and Performance: Gain: 14.82 dBi Peak Gain: 14.82 dBi @ 144.3MHz F/B: 39.1 dB Peak F/B: 37.43 dB Max Power 10 kW SWR: Below 1.1:1 from 143.85MHz to 145.3MHz Boom Length: 19.02 ft. (5.8m) Turning Radius: 9.84 ft (3m) Wind Survival: 99.5 MPH (160 km/h) Weight: 14.33 lbs. (6.5kg) Wind Loading: 2.41 sq. ft. (0.22sqM) Stacking information: Vertical Stacking Spacing Distance: 3.1m for minimum under-lobes.
Not Yet Reviewed
$679.99
M2 Antennas 2MCP14 2 Meter Circularly Polarized Beams
M2 Antennas 2MCP14 2 Meter Circularly Polarized Beams are the right choice for satellite operations with basic light-duty azimuth-elevation rotator systems. They feature a specially configured driven elements and phasing feeder system and are typically assembled to achieve right-hand circular polarization needed for most satellite operations. An optional polarity switch is available. A single feedline is used to connect 2MCP14 antennas to the 2 meter section of the satellite transceiver. A second feedline typically connects a mated 436CP30 70cm Circularly Polarized Beam, mounted at the other end of a cross boom, to the same satellite transceiver. 2MCP14 beams are light, medium performance circularly polarized antenna designed to work across the two meter amateur band. Optimum match and gain are between 144 & 147 MHz for the satellite band. Computer design techniques help keep spurious side lobes low down for optimum signal to noise ratios. This antenna features CNC machined, O-ring and silicone-gel sealed driven element assemblies that are common to all M2 Yagi antennas. They insure years of trouble free performance regardless of weather. M2 Antennas 2MCP14 2 Meter Circularly Polarized Beams are available for your satellite capable system, right here at DX Engineering.
( 6 )
$662.99
M2 Antennas 436CP30 70cm Circularly Polarized Beams
M2 Antennas 436CP30 70cm Circularly Polarized Beams are a practical sized, yet high performance circular polarized antenna with a remarkably clean pattern. The pattern is important in order to match the antenna's noise temperature with modern low noise preamps. This antenna is ideal for satellite work but is also excellent for terrestrial uses like ATV, repeater operation, and long haul tropo DX. These beams feature CNC machined driven element module is O-ring sealed and weather tight for low maintenance and long-term peak performance. Internal connections are encapsulated in a space-age silicone gel that seals out moisture and improves power handling. The 3/16 in. 6061-T6 aluminum rod elements are centered to minimize interaction and maintain good ellipticity. Insulators are UV stabilized and locked in place with stainless keepers. Rugged construction and uncompromising performance for the boom length; that's M2 Antennas 436CP30 70cm Circularly Polarized Beams!
( 7 )
$643.99
InnovAntennas LFA3-HG 50 MHz 5-Element Yagi
InnovAntennas 50 MHz LFA3-HG 5-Element Yagi was designed to have the best gain on a relatively short boom. This antenna offers forward gain of 10.7 dBi (16.2 dBi at 10m above ground) and an exceptional 31 dB front-to-back rating with SWR less than 1.4:1 in the 50-50.4 MHz range. The low profile LFA3 dipole achieves a significant reduction of noise, allowing clear reception of much weaker signals, a key component of operational improvements and success. The LFA3-HG has a 12.8 ft. boom and a low 2 sq. ft. wind load, making this beam ideal for typical 6 meter stations as well as for stacking to maximize gain, especially when available space restricts the use of a longer boom Yagi. It features a 1.25 in. (32mm) 16-guage square aluminum tubing boom for rugged reliability and low weight. This antenna is made with single piece 5/8 inch (15.88mm) element centers, 1/2 inch (12.7mm) tips with loop ends made with 3/8 inch (9.525mm). The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. The introduction of the loop-shaped and phase-fed dipole achieves considerably fewer side lobes in the Yagi directional pattern. With less energy absorbed from the sides and from behind, these antennas becomes quieter and they achieve a higher forward gain. The 50 MHz Monoband LFA Yagis from G0KSC represent a significant advancement in the development of Yagi antennas.
( 1 )
$529.99
InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas
InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are an exciting development for the fascinating hobby of long distance (DX) reception of free, over-the-air broadcast FM radio. The OP-DES Yagi directional antennas are specially designed for better gain, great front-to-back and patterns with fewer side lobes, to dramatically improve your reception experience by helping your tuner or receiver achieve a new level of performance. For FM DX enthusiasts who own great FM Tuners and Receivers, pulling in new distant stations at full quieting is thrilling. Capturing a weak station while rejecting an on-channel stronger station can be especially gratifying. Hearing distant fringe and local stations at full fidelity without noise is the ultimate goal for FM audiophiles as well as FM DXers. Even HD Radio enthusiasts can increase their channel count with full sound quality and fewer dropouts. One of the distinctive design features of the OP-DES Yagi Antennas is a low feedpoint impedance that allows either 50 ohm or 75 ohm coaxial cable to be connected directly to the driven element, eliminating the losses of a transformer balun. With several boom lengths available, for the FM enthusiast on a budget, for the casual listener with a treasured vintage receiver, and for the most discerning FM Tuner audiophile, best-ever reception is possible with an InnovAntenna FM Broadcast OP-DES Yagi. InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are available as: IVA-18484-0108 Compact and Space-Saving 8 element, 6.5 ft. boom, 9 to 10 dBi gain, typ. 24 dB f/b IVA-18484-0145 Cost-Effective Performance 11 element 12 ft. boom, 9.8 to 12.6 dBi gain, typ. 25 dB f/b IVA-18484-0110 High Performance 14 element, 18 ft. trussed boom, 10-13 dBi gain, 20 to 42 dB f/b IVA-18484-0112 Ultimate Performance 18-element, 24 ft. trussed boom, 11-14 dBi gain, 20 to 44 dB f/b Choose the InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antenna that is right for you. Immerse yourself in a world of music, news and entertainment and discover a clarity and fidelity that you never heard before on your FM Tuner or Stereo Receiver.
( 2 )
$549.99
—
$735.99
EAntenna VHF and UHF Directional Antennas
EAntenna VHF and UHF Directional Antennas include exciting new offerings for the 50, 144 and 430 MHz bands. Weak-signal enthusiasts will enjoy using these high quality beams with superior specs for SSB, CW, digital and satellite. Here are the original low-noise Loop Fed Array mono-band beams or Optimized Wideband Arrays for VHF and UHF. Plus there are super specialized 2 meter or 70 cm Cross Polarized Yagis and the compact EAntenna 6 meter Moxon antenna that has only a 3 ft. boom! NOTE: The dual-band beams for 2 meters and 70 cm designed by DK7ZB cover 144 to 146 MHz and 420 to 440 MHz, which is the entire band in Europe. In the USA they are suitable for use on SSB, CW, digital and satellite as a horizontally polarized antenna. They will NOT function for the American FM Simplex and Repeater band sections of 146 - 148 MHz and 440 -450 MHz. DX Engineering recommends antennas manufactured by EAntenna because their attention to detail is meticulous! These Yagi, log periodic and rotatable dipole antennas are built with only the highest quality stainless steel hardware and aircraft grade aluminum. As you look through their selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce EAntenna premier HF beams and state-of-the-art VHF and UHF antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 MPH wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus we can ship internationally! When you are making plans for a new antenna at your station, plan to look right here for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version. IMPORTANT: EAntenna VHF and UHF Loop Fed Antennas are intended to be mounted horizontally for SSB and CW operation which is at the lower frequency end of the bands, NOT on FM. For example, the 2 meter LFA should be mounted horizontally and is tuned for use on 144-146 MHz and is not intended for FM use on 146-148 MHz. Additionally, the DK7ZB design EAntenna dual-band beams for 2 meters and 70 cm cover only 144-146 MHz and 420-440 MHz, the same European frequency range, and so they are not suitable for FM use in North America. EAntenna Cross Polarized LFA beams have both horizontal and vertical elements with only 144.0 - 144.5 MHz coverage designed specifically for EME or satellite enthusiasts.
( 61 )
$544.99
—
$679.99