Availability
Antenna Switches
Hamplus AS-603WL Automatic Remote HF and VHF Antenna Switches
Hamplus AS-603WL Automatic Remote HF and VHF Antenna Switches provide a new level of affordable convenience. This amazingly intelligent, three-transceiver interfaceable dual-relay smart control communicates wirelessly with and selects a six port remote antenna relay via the coaxial cable. The upgraded AS-603WL Smart Control Console with a black finish controls the AS-61WL weatherproof outdoor relay box with no control cable required. Select any one of three radios to connect or bypass the single amplifier I/O in the shack. Supporting one antenna connected to one radio at a time, manual or automatic selections of antenna and radio are confirmed with illuminated pushbuttons. Transceivers interfaced with optional cables provide frequency data for memorized automatic antenna selections. Interface cables are available for Elecraft, Icom, Kenwood and Yaesu transceivers which support frequency data for specific antenna selections by band segment. The AS-603AL also features an RS-232 serial port for PC controlled remote operation. The Hamplus AS-603WL Black system operates from 1.8 to 150 MHz and handles up to 3,000 watts PEP under 1.5:1 SWR. SO-239/UHF Female connectors on the back panel of the AS-603WL console include an In/Out pair to use one linear amplifier, wattmeter, or both, with all three radios! Click on HPY-AS-603WL-BK below to see more details! Finally, an intelligent remote antenna switch that knows what to do! Hamplus Automatic Remote Antenna Switch and Control Console Packages are ready for your multi-radio and multi-antenna station.
Not Yet Reviewed
$837.99
4O3A 8xAB Antenna Switches
4O3A 8xAB Antenna Switches integrate eight independent A/B switches into a single compact unit, enabling seamless switching between multiple antennas and radios. When paired with two 403A Antenna Genius switches (O3A-40-AG8X2 or O3A-40-AG8X2-N), it forms a powerful 8×4 antenna matrix, allowing up to eight antennas to be routed to four radios with exceptional isolation. Built with the needs of high-power stations in mind, the 8xAB Switch delivers robust performance, intuitive operation, and a clean, maintainable installation. The primary motivation behind the 8xAB switch is the integration of two Antenna Genius smart switches into an 8×4 Super Switch.
Not Yet Reviewed
$775.99
DX Engineering RR8B Remote Antenna Switch and Control Console Packages
DX Engineering RR8B Remote Antenna Switch and Control Console Packages bring a new level of convenience to your antenna setup. These packages combine DX Engineering's 5 or 10 kW key-down switch, plus a CC-8A or EC-8 Control Console. RR8B series Remote Antenna Switches feature: * 0-54 MHz operation with industry leading port-to-port isolation * 5 or 10 kW versions * Fully RF shielded with high strength, UV-resistant cover, stainless steel mounting bracket, and hardware * Lightning protection is standard * Solderless, removable plug for easy installation of control line with no disassembly * Can be wired without disassembly * Can select individual or multiple ports for stacking and phased array applications * Safe 12V DC relay operation * Unused antenna ports are open by design; may be internally jumpered to be grounded when not selected CC-8A Consoles feature: * 1-of-8 control format * 8 front panel LEDs to indicate switch position (with adjustable brightness) * Rear panel external plug * Operates on your 12V DC source, ideal for battery or emergency ops * Ergonomic selector knob * Powder-coated metal housing EC-8 controller features include: * 1-of-8 control format * Green power LED * Operates on your 12V DC source, ideal for battery backup or EMCOMM * Ergonomic selector knob * Powder-coated metal housing Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When a complete remote antenna switching system is needed and high reliability is a must, DX Engineering RR8B Remote Antenna Switch and Control Console Packages are your best solution! * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 8 )
$789.98
—
$859.98
403A Antenna Genius 8X1 Smart Antenna Switches
403A Antenna Genius 8X1 Smart Antenna Switches are designed to connect up to eight antennas to a single radio with seamless control and automation. Engineered for reliability and flexibility, they integrate effortlessly into both local and remote station installations. Whether you're a contester, DXer, or casual operator, the Antenna Genius 8x1 offers robust switching capabilities, intuitive software control, and future-proof expandability through regular firmware updates and third-party software support.
( 1 )
$839.99
Hamplus Antenna Control Switching Devices
Hamplus Antenna Control Switching Devices include automatic band data controlled remote antenna switching systems including full web remote capability without a PC. Hamplus automates HF + 50 MHz switching for 8 to 16 antennas and from 2 to 8 radios, including devices to connect multiple directional controllers to as many as 8 different antenna rotators. Band-data and frequency reading, multi-function control consoles include support for all major brand transceivers with radio specific control cables. Hamplus also offers manual multi-port to multi-radio antenna switches and a four-stack antenna switching system. Years of Amateur Radio and professional experience shows in these components for emerging and elite DXers as well as established multi-radio contest stations. Hamplus products will improve the function and performance of your station. Click on each part number for specific descriptions, specifications, more information and links to compatible or required products.
( 11 )
$999.99
ACOM ASW-120 Remote Antenna Switch and Selector Sets
ACOM ASW-120 Remote Antenna Switch and Selector Sets contain two essential components: the 2000SW Remote Antenna Switch and the 2000S Automatic Antenna Selector, pre-set internally for 120 VAC with a USA plug installed on the power cord. This combination system provides complete antenna selection automation when interfaced with the Acom 2000A Automatic HF Linear Amplifier, or it may be used as a manually or PC controlled antenna switching system. The included 2000SW Remote Antenna Switch is a rugged, high-quality weatherproof outdoor relay unit with 10 antenna ports and 1 common port, all PTFE UHF female (SO-239) connectors useable up to 60 MHz. At low SWR this switch handles up to 5,000 W at 30 MHz and 3,600 watts at 50 MHz. Hot-switching protection is provided and unused antenna inputs are automatically grounded for surge suppression. Relay water intrusion protection is at the IP53 level. These remote switches will tolerate a very wide temperature range and operate on a control voltage range of 24 to 31 VDC, as supplied by the 2000S Automatic Antenna Selector. The included 2000S Automatic Antenna Selector, as shipped in the ASW-120 package by DX Engineering, has a power cord terminated with a NEMA 5-15P plug for 120 AC. No additional power supply is required. The system uses a 4 bit BCD selector signal and incorporates a feedback signal to the controller. Connection of the 2000S Selector to the 2000SW Switch requires a minimum of a 7-conductor shielded control cable of AWG-24 (CAT5e) which is sufficient to about 165 feet. A longer control cable will require a larger wire gauge. Connectors included require soldering. Also included are a 3-meter length of 7-conductor control cable and 1 interface cable for connecting the controller to the ACOM 2000 amplifier. Here are the Specifications of the ACOM ASW-120 Remote Antenna Switch and Selector Sets: * Operating Frequency: 0 to 60 MHz. * 10x UHF female (SO-239) PTFE connectors * Power Handling vs. SWR: 0 to 30 MHz: 5000W at 1:1; up to 2500W at 2:1; up to 1600W at 3:1 * Power Handling vs. SWR: up to 60 MHz: 3600W at 1:1; up to 1800W at 2:1; up to 1200W at 3:1 * Mismatch VSWR: for 0 to 1.8 MHz better than 1.02:1; 1.8 to 30 MHz better than 1.08:1; 30 to 60 MHz better than 1.20:1 * Crosstalk isolation: for 0 to 1.8 MHz-better than -100dB; 1.8 to 30 MHz -better than -70dB; 30 to 60 MHz better than -66dB * Relay Changeover Time: Less than 150 milliseconds including any relay chatter * Operating temperature range: minus 30 to plus 60 degrees C * Water Intrusion: IP53 * Power Supply: 120 VAC, NEMA 5-15P three-prong power plug (USA) * Total shipping weight 6kg (products 4kg) NOTE: This Acom ASW-120 Remote Antenna Switch and Selector Set is available from DX Engineering ONLY as a 120 VAC system. The internal selection is pre-switched to 120 VAC and the power cord is pre-wired with a NEMA 5-15P three-prong grounded plug, as a convenience for our North American customers. This negates mention in the 2000S Manual of "Normally the unit is supplied with Voltage Selector set for…240 V." This is not the case of the ASW-120 purchased from DX Engineering, therefore is not necessary to "…contact the dealer for details…" The 120 VAC selection has been made in advance for every ASW-120 set. The "Documentation" tab provides links to each unit's manual which include additional product information that is useful. For a remote antenna switch and controller of excellent design, order ACOM ASW-120 Remote Antenna Switch and Selector Sets from DX Engineering!
( 1 )
$959.99
SSB Electronic AS-304 Four Port Mast Mount Antenna Switch
SSB Electronic AS-304 Four Port Mast Mount Antenna Switch can be used on all frequencies up to 600 MHz and is electrically operated using a control cable and an optional control console. The weatherproof housing allows the mast-mounted switch to be installed as close to the antennas as possible with the connectors facing downward to keep connections dry. Equipped with heavy duty relays, the AS-304 is recommended for a variety of tasks due to its wide frequency coverage, low insertion loss and high power capability. Ratings are dependent upon the selected connector version, UHF or Type-N, as detailed below. The control of the AS-304 provides a no-voltage default selection of Antenna 1, with 13.8 VDC applied to one of three pins of the chassis 4-pin DIN connector to select Antennas 2, 3 and 4, with the fourth pin ground. The mating connector is supplied for the user supplied four conductor control cable. This type of 1-of-3 antenna port selection is handled with the optional DXE-CC-4 Four Position Control Console featuring a large rotary switch and 4 indicator LEDs, or with another third-party control device, or a user supplied rotary switch. Technical Data for the SSB Electronic AS-304 4 Port Mast Mount Antenna Switch - Frequency range: DC – 600 MHz - Antenna ports: 4 - Insertion loss: < 0.2 dB up to 500 MHz - Standing Wave Ratio: <1.2 : 1 - RF Power Handling for AS-304 UHF (SO-239) Connectors: Up to 30 MHz: 1.5 KW PEP/1 kW CW/500W Digital 144 MHz: 1 KW PEP/500W CW/250W Digital 432 MHz: 600 W PEP/300W CW/150W Digital RF Power Handling for AS-304 N (Type-N) Connectors: Up to 30 MHz: 800 W PEP/400 W CW/200W Digital 144 MHz: 800 W PEP/400 W CW/200W Digital 432 MHz: 600 W PEP/300W CW/150W Digital - Relay Power: 12 -14 V at 80mA max. - Mast diameter, max.: 2.283 in. (58 mm)
Not Yet Reviewed
$859.99