Selected Filters


Availability


8 Results Found For "Receive Array"

Part Groups

Results 1 - 8 of 8

DX Engineering Receive Eight Circle Array Controller and Switch Package

DX Engineering Receive Eight Circle Controller and Switch Package, DXE-RCA8C-SYS-2P, is for the array builder who wants to use their own passive receive verticals for a mono-band receive array. The DX Engineering Eight Circle Array will dramatically improve reception of weak distant signals with unparalleled rejection of extraneous signals and noise. This eight-direction switchable array uses a special end-fire/broadside combination of eight short receiving vertical elements. The resulting narrow directional receiving pattern is superior to standard or short Beverage antennas, Reversible Beverage systems and typical two, three or four element arrays. Receive arrays of short vertical elements limit signal and noise for dramatically superior weak signal reception as compared to full size transmitting antennas and arrays. With proper spacing of eight vertical elements, the Receive Eight Circle Array is the ultimate high performance, directional receive antenna for HF Amateur, SWL or AM DXing. DX Engineering Receive Eight Circle Arrays offer directional performance comparable to eight very long phased Beverages, using far less land area. These packages are designed to be used with eight identical, user-supplied, active or passive symmetrically-spaced vertical elements to provide switching for an 8-direction receiving antenna system. Passive elements will generally provide you with a monoband receiving system. With a DX Engineering Active Vertical package you can achieve excellent directional receiving performance over three bands. Click "More Details" below for additional information, features and specifications. The "Documentation" link contains manuals and associated files for complete product installation information. Build an exceptionally effective, electronically rotatable, stationary receive antenna that lets you hear the DX that cannot be heard on a transmit antenna. Dig the weak signals out of the noise with an antenna that can help make your station one of the best. Order the DX Engineering Receive Eight Circle Controller and Switch Package.

Not Yet Reviewed

$815.98

DX Engineering Receive Short Element Active Vertical Antennas

DX Engineering Receive Short Element Active Vertical Antennas (the RSEAV Antennas) offer excellent low noise radio frequency reception from 40 kHz to 30 MHz. Better receiving performance than full-size transmit antennas and other active makes the DXE-RSEAV-1 the best choice on the market for VLF through HF reception, including long-distance AM broadcast, Medium Wave and Shortwave (SWL), and new low-frequency Amateur bands, DXing, contesting, and everyday HF operations. Click on a listed product title and Scroll Down to see additional important information. A complete product description appears below the Specifications Overview. Instruction manual links appear in the Documentation section. The sleek and stealthy DXE-RSEAV-1 includes a high-quality three-section 8.5 ft. (2.6m) aluminum tubing whip, insulated mounting plate and the completely new DXE-AVA-3 Active Matching Unit. Its state-of-the-art broadband operational amplifier design works as a high-impedance buffer between the short antenna element and RG6U 75-ohm coax. When installed in the appropriate location, RSEAV antennas provide significantly better weak signal reception than other active receive antennas and full-size transmit-capable antennas, with substantially reduced noise and lower spurious signal interference. Receive Short Element Active Vertical Antennas are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. They are sold individually (DXE-RSEAV-1), or with a bias tee (DXE-RSEAV-1FVI) and DXE-RSEAV-1 Receive Short Element Active Verticals set a new standard for "Active Receive Vertical Antennas" replacing legacy DXE-ARAV-3, ARAV-2, ARAV-1 and AL-24 versions. Use multiple DXE-RSEAV-1 for all 4 and 8 element DX Engineering Receive Arrays – all 3, 4 and 8 element Hi-Z Antennas Arrays – and 2 element receive arrays with DXE-NCC-2 and NCC-1 Variable Phasing Controllers. The DXE-RSEAV-1 is designed to be a very low-gain, low-noise antenna for greatly improved signal-to-noise performance over a very wide range of frequencies. In a proper single or multi-element array installation, this Receive Vertical antenna will attenuate high-angle skywave signals, which is the goal for a low band DXing receive antenna. Low-angle, long-range DX signals are easier to copy with a good radio and DX Engineering Receive Short Element Active Vertical Antennas. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace or upgrade all the elements in the array with identical, fully compatible DXE-RSEAV-1 antennas or DXE-AVA-3 units.

4.75 out of 5 stars ( 4 )

$999.96

DX Engineering NCC-2 Receive Antenna Phasing Systems

Imagine adjusting the controls to knock out strong interfering stations or noise—and then being able to copy and log that weak DX station. By successfully combining the right antennas with the advanced phasing capabilities of the NCC-2, this is the operating thrill that every radio enthusiast can enjoy, again and again! DX Engineering NCC-2 Receive Antenna Phasing Systems are variable phasing controllers that combine the 300 kHz- 30MHz received signals from one transmit antenna and one receive antenna, or from two dedicated receive antennas. Combining signals from two stationary antennas physically spaced 1/10 to 1/2 wavelength apart creates an array pattern with signal peaks and dips called nulls. Adjusting the NCC-2 Phase and Balance controls have the effect of electronically rotating or steering that pattern. Steering the null direction to significantly weaken a local or distant interfering signal or noise is known as "Noise Cancelling." This "Noise Cancelling Controller" (NCC-2) can dramatically enhance the reception of weak signals from non-null directions. This "reverse-beam" capability on radio frequencies AM Broadcast through HF can provide amazing benefits for many types of AM DX and SWL receiving and ham radio operating. Work new DX, hear the weak station in casual regional conversations, snag the rare multiplier in contests and hear beyond the noise and interference in dire circumstances. DX Engineering NCC-2 Phasing Systems now feature the built-in RTR Receive-Transmit Interface relay system that expands the exciting benefits of antenna phasing for interference reduction in two ways: * First, the NCC-2 can combine signals from the HF transmit antenna and a separate receive antenna to effectively notch-out strong stations or noise. Almost any Amateur can now enjoy the benefits of antenna phasing and noise-nulling, even those with space limitations for separating the receiving and transmitting antennas. * Second, the user of any standard HF transceiver that lacks a separate receive antenna input can have enhanced reception of noise and signal nulling with the DXE-NCC-2 and two antennas. Rear panel SO-239, F and BNC connectors make the NCC-2 extremely versatile and easy to connect to almost any receiver or HF transceiver up to 200 watts. Redesigned with plug-in modular circuit board sockets, the NCC-2 includes one switched and powered internal slot and two passive internal slots per channel to accommodate these new options: * DXE-RPA-2-PM Receive Preamplifier Plug-In Modules (powered): one per channel for low-signal passive antennas with poor ground conditions * DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module (passive): Front-end protection for the NCC-2 and the receiver * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-In Module (passive): to match 75 ohm RX ANT feedlines to NCC-2 50 ohm internal impedance * NCC-2 Receive Filter Sets (passive, non-switchable): High Pass, Band Pass and Low Pass Filters for 160, 80, 40 meters typically in stock, with other band filters available individually by special order. DX Engineering NCC-2 Receive Antenna Phasing Systems offer these new additional benefits: * Multi-Color Status Indicating LEDs for Power, RTR Mode and Preamp Power CH A and CH B * New Radio Key Line Input with RX Enable Output-RTR Failsafe to prevent RF damage to NCC-2 and RX equipment * New ACC Key Line Output RCA female 'ground on transmit' pass-through for Amplifier or Accessory * New screw-on 2.1mm DC connector to prevent accidental power cable pull-out * Operates on +13.8VDC @ 2A input to power the NCC-2 and internally jumper set Bias Tee on each RX ANT ports for coax fed Active Verticals and other accessories. Offering new and experienced radio enthusiasts the next level of reception enhancements, DX Engineering model NCC-2 Receive Antenna Phasing Systems in use around the world!

4.89 out of 5 stars ( 19 )

$955.99

DX Engineering Phased Array Quarter Wave Tuned Cables

DX Engineering Phased Array Quarter Wave Tuned Cables ensure optimum pattern control and gain from your phased antenna system. These cables are custom built to your array frequency, made with the highest quality waterproof PE jacketed, direct-burial RG-11/U 75-ohm low-loss foam coaxial cable and terminated with silver plated PL-259s. From the system phasing unit to each array element, these phasing feed-lines are one quarter wavelength long electrically, which differs from the free-space dimension by the velocity factor of the cable. The electrical dimensions of these cables are critical to system performance. These cables, manufactured to DX Engineering specifications, have a nominal velocity factor of 0.82, providing plenty of physical length for easy burial and routing from the base of the vertical to the center-mounted controller. DX Engineering Phased Array Quarter Wave Tuned Cables are custom built by DX Engineering. Each is hand crafted and electronically tuned to a specific HF frequency. Typically, they are tuned to the same frequency as the antenna array. After placing your order for DX Engineering Phased Array Quarter Wave Tuned Cables, please inform us of the order number and your array frequency for your tuned cables by e-mailing dxengineering@dxengineering.com or by calling 800-777-0703 or 330-572-3200. You may leave a message after business hours. Custom cable assembly orders will process after we receive your frequency information. Please contact DX Engineering Technical Support if additional assistance is needed. We will contact you if we have any questions about your special order.

4.67 out of 5 stars ( 3 )

$899.99

DX Engineering Four-Square Array Three-Quarter Wave Tuned Cables

DX Engineering Four-Square Array Three-Quarter Wave Tuned Cables are offered for your antenna system where the recommended quarter wave cables will be too short for your installation. There are cases where the phasing controller relay unit must be mounted away from the exact physical center of the array, such as when elevated verticals or elevated vertical dipoles are used. Three-quarter wavelength tuned cables are then required. The electrical dimensions of these cables are critical to system performance. They're made from the highest quality waterproof, direct bury 75-ohm RG-11/U gas-injected low-loss foam coaxial cable. Their length differs from a free-space dimension by the velocity factor of the specific cable type. These cables, manufactured to DX Engineering specifications, have a velocity factor of 0.84, providing the maximum physical length to allow for easy burial and routing from the feedpoint of the antenna to the controller relay unit. DX Engineering Four-Square Array Three-Quarter Wave Tuned Cables must be ordered for your desired frequency. These custom built tuned coaxial cable assemblies ordered from DX Engineering are hand crafted and electronically tuned to a specific HF frequency. Typically, customers request that they are tuned to the center or slightly below the center of their antenna array band, depending upon their planned modes of operation. After placing your order, please inform us of the desired frequency for your cables by e-mailing dxengineering@dxengineering.com or by calling 800-777-0703 or 330-572-3200. You may leave a message after business hours. Custom cable assembly orders will process after we receive your frequency information. Please contact DX Engineering Technical Support if additional assistance is needed. We will contact you if we have any questions about your special orders.

Not Yet Reviewed

$999.96

Hamplus Four Stack II Systems

Hamplus Four Stack II Systems makes it possible to easily and quickly change selections of any in-phase combination of two, three, or four stacked HF beam antennas or an array of HF phased vertical antennas. Plus, Four Stack II Systems can be combined to control antenna selections on any of the array switches by any of the multiple system Control Consoles. This is possible with simple patch cable networking. Up to four operating positions can have access to four different stacked arrays. The Hamplus Four Stack II System provides unprecedented control of your multiple antenna arrays. The 4-Stack Control Console has five illuminated pushbuttons; ANT 1 through 4 select stacked antennas and ENTER aids in programming. Each antenna selection keys works as a one-touch ON, one-touch OFF method, so it is easy to control which of antennas you want to use at a certain time. Trying different combinations of antennas for the transmission and reception can be accomplished independently, quickly and easily. Arrays can be configured differently for receive and transmit without manually switching back and forth. The system is managed and supervised by a microcontroller that has internal software designed to meet the various system functions and easy operation. All control boxes can be interconnected so that any remote console can command any antenna array switch box. The Four Stack II switch box is rugged and capable, with a better design for mounting outdoors, near or under antenna arrays. No extra or special housings are needed. With the internally connected controller cable, the system is an easy, plug-and-play operation. The Four Stack II is available with either Type N female or UHF female (SO-239) connectors for your array. The Four Stack II is rated for 3,000 W maximum RF power and covers 1.8 to 30 MHz. Connection to 50 ohm, low SWR antennas with 50 ohm coaxial cable is required. All combinations of antennas are in-phase only. Achieve complete control of your antenna arrays with Hamplus Four Stack II Stack Systems from DX Engineering!

Not Yet Reviewed

$899.99

DX Engineering TFS4 Series B Transmit Four Square Systems

DX Engineering TFS4 Series B Transmit Four-Square Systems bring together the highest level of engineering excellence with the practical realities of operator convenience and ease of installation. These four-square hybrid systems are available in versions for the 160, 80, and 40 meter bands. They can be easily dropped into your quarter-wave spaced vertical 4-antenna array to provide optimum directional control. They allow the operator to receive or transmit with 5.5 dB gain in any one of four directions with a 20+ dB front-to-back ratio for interference reduction from unwanted directions. You can also switch to a single Omni-directional pattern with a push of a single button. This combination permits you to listen "all-around," unhindered by pattern nulls, and then select the best direction for signal reception and noise rejection. TFS4 Series B Transmit Four Square Systems are designed for use with four monoband vertical antennas placed at the corners of a square that is one-quarter wavelength on a side. The vertical element must be ungrounded and resonant in the desired band, and should be directly base-fed by the coaxial cable phasing lines from the centrally located controller (shunt-fed towers or radiating elements cannot be used). DX Engineering has several vertical antennas that are well suited for this application. Above all, a properly designed and installed radial system is necessary for top antenna performance, whether it's a single vertical or a full array. DX Engineering strongly recommends our optional Q75- series quarter wavelength cables constructed from our own high quality DXE-11U coax. It features a waterproof PE jacket, foam dielectric and has a velocity factor of 82 percent. These cables are electronically pruned to a precise electrical length derived from your choice of center operating frequency, terminated with hand-soldered silver-PTFE PL-259 connectors and weather-sealed with shrinkable tubing. Finally, each cable is tested for high voltage breakdown for maximum reliability and power handling. Since the transmit power is divided by the controller, the coaxial cable can handle QRO power with ease. If you already have a four-square array with a hybrid controller and would like to upgrade to improved performance and the Omni feature, the DX Engineering TFS4 Series B Transmit Four Square Systems are a direct transplant. BCD logic switching allows for the use of a 4-wire control cable to perform the necessary switching functions when powered by the included control console. Features: * Classic hybrid design is easy to install * Four directions plus Omni for versatile operation * 5 kW CW power rating for high reliability * Hot switching lock-out to disable amplifier while switching * Drop-in replacement for COMTEK systems * Proven DX Engineering RF relays for high performance * RF Shielded, high impact thermoplastic cover offers unique protection * Relays cycle during Power-On to ensure clean contacts Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Four-square systems work great! DX Engineering TFS4 Series B Transmit Four-Square Systems provide the heart of a modern phased array.

Not Yet Reviewed

$807.98

—

$831.98

I0JXX Mast Mount Low Noise Preamplifiers

I0JXX Mast Mount Low Noise Preamplifiers offer high gain amplification with excellent noise figures in VHF and UHF amateur band optimized devices for casual operation or contest-grade directional antenna systems. Built for long-term tower top use, two high-power SPDT coaxial relays are used to protect the internal, band-specific I0JXX LNA using low-loss and high-isolation interconnections. These exceptional components are housed in a specialized weather and UV resistant polyamide black case with a drip edge surrounding two downward facing Type N female connectors mounted on a rugged, 12 gauge (2mm) aluminum panel. A separate female BNC is for DC power and control voltage, intended to be sent from the required sequencer via an inexpensive coaxial cable. Extraordinary receive-transmit-receive changeover performance is achieved by these compact 12VDC mast mounted units. Their internal LNA (low noise amplifiers) offer preamplification using ultra-low noise components as good or better than a typical receiver front end, which preserves the capabilities of a low-noise antenna or stacked array and the transceive system. The internal relays are connected to bypass the internal preamplifier when power is removed. An I0JXX SEQJXXBOX Sequencer can be used to control the I0JXX Mast Mount Low Noise Preamplifiers for two-way VHF or UHF communications. I0JXX Mast Mount Low Noise Preamplifiers are built with high quality components for many years of service. View the band unit specific specifications on each part detail page.

Not Yet Reviewed

$827.99

  • 1
  • Page 1 of 1