Availability
14 Results Found For "field"
Instant Rebate
Yaesu FT-710-FIELD HF/50 MHz Base/Portable Transceivers
The new Yaesu FT-710-FIELD HF/50 MHz SDR Transceivers are now available in a convenient field package that includes a handy carrying belt , but without the SP-40 speaker. The SP-40 External Speaker is available as an optional accessory if you still want to enjoy the benefit of the Acoustic Enhanced Speaker System (AESS) out in the field. FT-710-FIELD represents the latest in SDR transceiver technology from Yaesu. This transceiver covers the HF Amateur Radio bands, 160 through 6 meters in a compact design that is perfect for portable operations, but equally suitable as a base station in the shack.
( 50 )
$999.95
Instant Rebate
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers provide continuous wide-range RX coverage from 30kHz through 174MHz, and from 400 through 470MHz including SWL, FM broadcast, and Air-band. TX band coverage includes HF 160 – 10M, with the addition of 6M, 2M, and 70cm. The Yaesu FTX-1 Field is perfect for portable field operation. This model features up to 10W of power output when used with an external 13.8VDC power supply. By attaching the SBR-52LI Li-ion to the rear of the Field Head, the FTX-1 provides 6W (5W for QRP) stand-alone operation on HF through V/UHF bands in all modes – SSB, CW, AM, FM and C4FM digital. 9-hour stand-alone operating time with 6W on HF bands (SSB), and 8-hour operating time with 6W on V/UHF bands (FM) are available (6-6-48 duty cycle). The FTX-1 Field Head can charge the included Li-ion battery automatically when connected to an External 13.8VDC power supply or use an optional third-party USB Type-C PD (Power Delivery) cable to recharge the battery (45W or greater/ 15V 2A).
( 16 )
$999.95
On Sale
ICOM IC-718 HF All Band Transceivers
ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.
( 47 )
$1,099.95
$899.95
REZ Antenna Systems Scout XFORM Antenna Kits
REZ Antenna Systems Scout XFORM Antenna Kits are designed to get you up and running fast. Based on the Scout XF Base, these versatile kits contain the parts you need to set up portable antennas in the field for portable operations. Each kit provides the building blocks to set the XFORM antenna system up in a variety of ways. What type of antenna you can set up with each kit is varied but comes with the parts to set up at least a vertical and a delta loop. The REZ Antenna Systems SXF-41KIT1 includes: the REZ Ranger Pro backpack, the REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, the REZ Ground Spike, the REZ common mode feedline choke, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit. The REZ Antenna Systems SXF-41KIT2 includes: The REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit. The REZ Antenna Systems SXF-41KIT3 includes: the REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, the REZ common mode feedline choke, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit The heart of these REZ antenna kits is the Scout XF mounting base, which is designed to connect your coax to the rest of the XFORM system. Featuring a pair of 3/8x24 studs, a ring for hanging the Scout and coupling nuts, this versatile mounting base allows for your antenna to be oriented in multiple ways. Connection points along the base allow for easy attachment of radials. The REZ XFORM 4:1 UNUN mounts to the top of the Scout XF mounting base and adds a 4:1 transformer to the antenna system. This is useful when setting the antenna up as a delta loop or a Rybakov Vertical. Gaskets on the UNUN allow for sealing against inclement weather. The REZ Multi mounts allow for attaching the Scout XF base to the Ground Spike or a tripod. Providing three 3/8x24 threaded holes on the top, one horizontal, and two at 45-degree angles opposite each other as well as a 3/8x16 and a 1/4x20 for mounting on a REZ Ground Spike or the REZ [Z]Pod Tripod. Comes with a 3/8x24 stud for mounting to the Ground Spike or [Z]Pod Tripod. The REZ Delta Loop Antenna Wire Kits are a 25-foot-long wire that is designed to be paired with a pair of 17-foot stainless steel telescopic whips. Copper clips on each end of the [Z]Kore Kevlar antenna wire provide a solid connection to the telescoping whips, and the wire stores on a convenient wire winder to keep the wire neat and for easy deployment and storage. The REZ [Z]-17SS Stainless steel whips are 17-foot-long telescopic whips that collapse down to 24 5/8in. Weighing in at 14.4 oz, with a power rating of 1000W PEP, these 17-foot whips are resonant on 20-6 meters by themselves or up through 40 meters with the addition of an XFORM UNUN. The REZ CM7 Common Mode feedline chokes provide a reduction in common mode current that travels back down your coax and causes issues for radiating your signal. These quality feedline chokes help keep the RF radiating from the antenna where you want it and not the coax. The REZ Ranger Pro Backpacks provide a convenient way to carry your REZ antenna system and ancillary gear into the field. Depending on the size of your radio and battery, you may be able to carry your entire portable setup in this backpack. This quality pack makes it easy for organization of all of your portable gear with multiple pockets and Molle webbing for additional attachment points to hold your gear.
Not Yet Reviewed
$759.94
DX Engineering DVA Dual Vertical Array Systems
DX Engineering DVA Dual Vertical Array Systems are advanced phasing systems that have set a new standard for array performance with two ground-mounted verticals. Dual Vertical Array Systems include a compact DVA Phasing Relay Unit made specifically for an individual HF band and an EC-DVA Directional Control Console. DX Engineering Dual Vertical Arrays produce two opposite enhanced End-Fire Cardioid patterns and one Broadside-Omni pattern. Heavy-duty components handle over 2 kW continuous RF power for enhanced performance at low SWR over a wide bandwidth. The Dual Vertical Array end-fire directional patterns achieve a real front-to-back over 20 dB with typical array forward gain up to 3 dB over a single vertical. The greatest advantage of a Dual Vertical Array is that a tower and rotator are not required, as with a Yagi antenna. Especially for 160, 80, and 40, and even on the other HF bands, a Dual Vertical Array is mechanically simpler and safer. Here is a financially practical directional antenna that is much easier to install! These are great directional antenna systems for temporary and Field Day operation, as well as for permanent builds, because they ARE so much easier to install than a beam! If you are dissatisfied with your present system, are ready for an upgrade, or just need to get out of the tower game, the DX Engineering DVA is your answer! Refurbish an existing antenna system, equip your temporary array, or build a new phased array with a DVA. It's all on the ground, safe and simple: DX Engineering Dual Vertical Arrays offer a better way to enjoy a high-performance mono-band directional antenna. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 4 )
$775.98
DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas
DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas, model DXE-7580FS-VA-1, are high performance 68 ft. antennas that are tunable to operate over segments of the entire 75/80 meter band with an SWR of 1.5:1 or less! These antennas are a breakthrough in full size, quarter wave verticals that offer full performance, but don't cost an arm and a leg. Plus, if your neighbors are the slightest bit touchy, these are the antennas for you. Their slim lines can hide in even a small stand of tall trees. Some have even painted these antennas the color that matches the bark of their surrounding trees! Designed with 6063 corrosion-resistant aluminum tubing and stainless steel hardware, these 80 meter vertical antennas are very durable and attractive. Because of their full size height and tubing size, rope guying is required on these antennas, typically at two levels. They include the DX Engineering standard stainless steel Tilt Base to allow you to walk the antenna up or down with only a few helpers on the rope guys. These inexpensive 80 meter verticals are ideal for phased arrays! DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas have a bandwidth that is outstanding—up to 528 kHz under 2:1, depending on your radial field. Your internal tuner can get the SWR down to 1:1 on any DX frequency for maximum power transfer and full performance! Of course, another key to performance is a good ground radial system; we recommend 32 radials, 65 ft. long. Fewer radials will work, but with diminished results. DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas feature: -- 5 kW SSB and CW rating—unparalleled reliability -- High power handling capacity--high strength, UV-protected EXTREN® insulators -- Ultra-wide SWR bandwidth and unbeaten gain -- Highest wind ratings—Up to 100 mph with proper rope guying --High strength 6063/6061 tubing manufactured to DX Engineering specifications -- Easy tilt up and down— exclusive antenna mount features DX Engineering's patented Tilt Base, *U.S. Patent Number 7,432,875 -- No rust --100 percent stainless steel tubing clamps and hardware -- Reliability second to none--specially manufactured stainless and aluminum saddle clamps, stainless bolts, and precision machining on each antenna Note: For additional information, please look at the files under the "Documentation" tab. Make plans to install your DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas and join in the fun of having the best possible signal on the 75 and 80 meter bands with a great antenna!
( 1 )
$899.98
DX Engineering TW Antenna 5-Band Explorer Packages
DX Engineering is now the manufacturer of TW Antennas!* Our DX Engineering TW Antenna 5-Band Explorer Packages preserve and build upon the legacy of this premier portable HF antenna maker. Covering all bands from 20 through 10 meters, including WARC, DXE-TW-2010L-P Explorer Packages include everything you need to go portable! The package is comprised of the basic antenna structure, the switchable band box and an antenna stand with travel bag. You supply the coax and your own powered transceiver. It's a great antenna for portable HF QRP! Ideal for portable use, the lightweight Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Think about special operating events like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air). For general camping and travel, a convenient and durable carrying case, DXE-TW-DXBAG, is included to make transporting these antennas in your car or RV a snap! Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antennas available. Note: Although a permanently-installed TW mount is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements without durable weather protection. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering TW Antenna 5-Band Explorer Packages are here to help you enjoy working stealthy HF at home or … anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
( 6 )
$888.95
The Radio Source Lowdown FlexPlane Groundplane Radial Wires
The Radio Source Lowdown FlexPlane Groundplane Radial Wires provide a ready-to-deploy groundplane system for the 630PD and other vertical antennas. Constructed from insulated, bonded copper radial wires, the FlexPlane creates a symmetrical radial field that extends outward from the antenna in all directions. This efficient groundplane configuration helps maximize signal performance and system efficiency while minimizing ground losses. Designed for both permanent and portable installations, the FlexPlane functions as a groundplane or counterpoise for vertical antennas. Simply connect the FlexPlane lead to the station ground connection and position the radial system horizontally beneath the antenna. The system may be suspended above ground, installed on the surface, or buried for long-term operation. For fixed installations, the use of a properly installed ground rod is recommended to provide an effective earth ground and additional lightning protection pathway for connected equipment. In portable applications, the FlexPlane is easy to deploy and recover. Its flexible radial design collapses quickly for convenient roll-up, transport, and storage, making it ideal for field operations, temporary installations, and emergency communications use.
Not Yet Reviewed
$795.00
Green Heron RT-21D-CDE Deluxe Universal Digital Rotor Controllers
Green Heron RT-21D-CDE Deluxe Universal Digital Rotor Controllers have a new green vacuum fluorescent display and a black front panel. The new deluxe version builds upon the excellent design of the RT-21 with higher resolution when using the Point and Shoot Knob. Offering the ultimate in operational capabilities, Green Heron RT-21D-CDE deluxe universal digital rotor controllers are the best controllers available for your new or existing directional antenna rotor unit or rotation systems. Replace your old-fashioned rotator controller with a modern, state-of-the-art digital controller! Green Heron RT-21D-CDE Deluxe Universal Digital Rotor Controllers from DX Engineering are pre-programmed specifically for Hy-Gain/CDE HAM-series and T2X (Tailtwister) rotators. However, they are easy to setup for all other rotator units because they are field programmable with convenient, internal, solderless jumpers. You can add these great features to your existing rotator unit without even climbing the tower! * Pre-programmed for Hy-Gain and CDE rotator systems * New high-visibility green vacuum fluorescent display with adjustable brightness * Custom black front panel * Fully versatile controls for point-and-shoot or manual push button operation plus presets * Automated rotator computer control through RS-232 or USB * PWM (pulse width modulated) variable-speed control * Start and stop ramping to reduce tower and antenna stresses * Precision heading accuracy up to 1/10 degree * Fully support side mounted antennas, soft limits prevent running into tower * Allow over-travel up to 720 degrees total * Offset control allows center of rotation at any heading, allows N and S center on same mast, and compensates for slipped mast * Fully user-programmable, reversal and brake delay, speed minimum and maximum, limits, ramps, and much more * Master/slave for stacked arrays, turn together or separately * Counter-rotation, install rotor above rotating tower * Easy front panel setup and setup utility software Green Heron RT-21D-CDE Deluxe Universal Digital Rotor Controllers will get your antenna system operational again or add advanced features your old controller lacked. Order from DX Engineering… today!
Not Yet Reviewed
$759.00
Green Heron RT-21D-M2 Deluxe Universal Digital Rotor Controllers
Green Heron RT-21D-M2 Deluxe Universal Digital Rotor Controllers have a new green vacuum fluorescent display and a black front panel. The new deluxe version builds upon the excellent design of the RT-21 with higher resolution when using the Point and Shoot Knob. Offering the ultimate in operational capabilities, Green Heron RT-21D-M2 deluxe universal digital rotor controllers are the best controllers available for your new or existing directional antenna rotor unit or rotation systems. Replace your old-fashioned rotator controller with a modern, state-of-the-art digital controller! Green Heron RT-21D-M2 Deluxe Universal Digital Rotor Controllers from DX Engineering are pre-programmed specifically for M2 Antennas rotators. However, they are easy to set up for all other rotator units because they are field programmable with convenient, internal, solderless jumpers. You can add these great features to your existing rotator unit without even climbing the tower! * Pre-programmed for M2 Antennas rotator systems * New high-visibility green vacuum fluorescent display with adjustable brightness * Custom black front panel * Fully versatile controls for point-and-shoot or manual push button operation plus presets * Automated rotator computer control through RS-232 or USB * PWM (pulse width modulated) variable-speed control * Start and stop ramping to reduce tower and antenna stresses * Precision heading accuracy up to 1/10 degree * Fully support side mounted antennas, soft limits prevent running into tower * Allow over-travel up to 720 degrees total * Offset control allows center of rotation at any heading, allows N and S center on same mast, and compensates for slipped mast * Fully user-programmable, reversal and brake delay, speed minimum and maximum, limits, ramps, and much more * Master/slave for stacked arrays, turn together or separately * Counter-rotation, install rotor above rotating tower * Easy front panel setup and setup utility software Green Heron RT-21D-M2 Deluxe Universal Digital Rotor Controllers will get your antenna system operational again or add advanced features your old controller lacked. Order from DX Engineering… today!
Not Yet Reviewed
$759.00
DX Engineering TW Antenna 80 Meter Solo Explorer Packages
Preserving and building upon the legacy of this premier portable HF antenna line, DX Engineering is now the manufacturer of TW Antennas!* DX Engineering's acquisition of the products and designs of these unique HF portable and stealthy antennas brings easy access and simplified ordering to this antenna line formerly known as Transworld. DX Engineering TW Antenna 80 Meter Solo Explorer Packages include everything you need to go portable! The package is comprised of the basic antenna structure, an expanded band box to contain the large 80 meter matching coils and an antenna stand. You supply the coax and your own powered transceiver. It's a great antenna for portable Low-Band QRP! Naturally stealthy, these compact HF vertical-dipole TW antennas feature a black powder-coat finish that is excellent for antenna use in HOAs. Use them where "CC & R" antenna restrictions preclude the installation of towers or easily-visible HF antennas. Simply unfold the DXE-TW-BAS-BLK Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the antenna stand and operate! No radials are needed with these 80-meter vertical dipoles! Ideal for portable use, the lightweight Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Think about special operating events like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air). For general camping and travel, a convenient and durable carrying case, DXE-TW-DXBAG, is OPTIONALLY available to make transporting these antennas in your car or RV a snap! Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antenna available. Note: Although a permanently-installed mount is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering TW Antenna 80 Meter Solo Explorer Packages are here to help you enjoy working stealthy HF at home or… anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
Not Yet Reviewed
$898.96
Mastrant Antenna Support and Guy Line Ropes
Mastrant Antenna Support and Guy Line Ropes are available in several sizes and strength ratings, perfect for support of wire antennas, vertical antennas and antenna masts, as well as support of Yagi booms and elements. Mastrant ropes are of the highest quality for strength and are UV-protected for extended longevity. MASTRANT-O is a highly reflective rope (bright orange plus braided reflective tape) based on long-term proven Polyester (Dacron) product line. It is designed for maximum visibility in public places such as Field Day and POTA activities. Like all Mastrant ropes, it is UV stable and resistant to all weather conditions. It has low weight, great abrasion resistance, great durability and is nonconductive (no effect whatsoever on your antenna). Moreover, in contrast to ropes made from aramid fibers (Kevlar, Vectran, Technora, Twaron), it has knot strength about 60 %. Mastrant-P and Mastrant-R Ropes are stronger than other synthetic ropes of the same size, made from proven modern polyester. Mastrant-Q is a new rope made from a blend of polyester and polypropylene, designed specifically for guying applications. It offers an excellent performance-to-price ratio and has a knot strength of approximately 60%. It replaces Mastrant-P in diameters of 6 mm (1/4 in.) and larger. Mastrant-S is a similar polyester/polypropylene rope, distinguished by its highly reflective strands for increased visibility. Mastrant-M is their highest strength rope with the Dyneema® DM20 core, a superior synthetic rope offering high performance at an affordable price. Very high strength, negligible elongation, very low weight, and great abrasion resistance are all attributes that make Mastrant-M the best rope for guying. Larger, stronger sizes of Mastrant-M are used in Europe and other parts of the world for tower guying. Durability and safety are of prime concern to ensure that an antenna installation remains fully operational for a long time. Antennas and guy lines are exposed to changing weather conditions, mechanical strain, UV radiation, humidity, and more. These non-conductive synthetic fibers have all the necessary qualities: high strength, negligible stretch but good flexibility, long life, low moisture collection, fast drying, a minimum bending radius adding the ability to tie knots, good UV radiation resistance, weather durability and resistance to acids and alkali. Conversely, steel guying wires are heavy, difficult to work with, and their strength deteriorates with time due to corrosion and general aging. Electrical conductivity of steel guys is an undesirable feature, as they interact with the antennas and adversely modify radiation patterns. Thanks to recent developments in synthetic materials, both amateur and professional users are changing over to non-conductive guys and ropes. Mastrant offers these products for a variety of applications, from thin support lines used for wire antennas and beams, to rope guys for supporting small and portable masts and vertical antennas. When you need quality rope to install, replace, or modify your antenna systems, consider Mastrant Antenna Support and Guy Line Ropes, now available from DX Engineering.
( 186 )
$995.99
DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas
New Name...Same Antenna! DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas are designed for low-noise reception of signals within the frequency range of 100-kHz to 30-MHz. Their integral, extra-high dynamic range, low-noise preamplifier is designed for minimum intermodulation distortion in the presence of very high-level signals that would normally overload most preamplifiers. Read more about the exclusive Clifton Laboratories design of the loop's RF-30 preamplifier by clicking "More Details" below. RF-PRO-1B Active Magnetic Loop Antennas, formerly known as the "Pixel Loop" and recently as InLogis, are now manufactured and serviced by DX Engineering. For Amateur Radio operators, AM DXers and Short-Wave Listeners, these active loop antennas are a great way to extend your listening ability. Add DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas to your radios and start hearing more signals with less noise! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 26 )
$809.99
Yaesu M-1 Reference Microphones
Yaesu M-1 Reference Microphones are the ultimate, high-quality, most-innovative desktop microphones and are dedicated to the most discriminating Ham Radio Operators. They feature combined Condenser (Electret) and Dynamic microphone elements. The Condenser Microphone Element produces greater frequency response and a clear, crisp audio characteristic that's perfect for being heard on crowded bands and in big DX pile-ups. The Dynamic Microphone Element delivers the rich low to mid tonalities, much favored for local QSOs and rag chewing. The response of each microphone element may be adjusted independently using the internal, Nine (9) Band, Graphic Equalizer. Each element has a separate gain control for independent adjustment of output levels. The output of each microphone may be selected separately, or they may be combined to produce the most pleasant tonal quality. Both the Condenser Element and Dynamic Element in the M-1 utilize the Nine (9) Band Graphic Equalizer centered at (63Hz, 125Hz, 250Hz, 500Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz). Each element's frequency response is independently adjustable. Two (2) frequency response memories and a "through" (bypass) mode are provided for each element, and are easily switchable by using one-touch buttons on the microphone base. The supplied TBC (Treble Boost Cowling) enhances the voice response around the important 1 to 1.5 kHz range. Attaching the cowling creates a condensed unique tonal texture that is pleasing for many. The PTT key uses three Air Cylinder Tubes which incorporate a contactless magnetic switch that ensures long-life and stable, noiseless operation. Yaesu's M-1 supports a wide range of Yaesu models including the FTDX-101D and FTDX101MP, FTDX10, FTDX-9000 and FTDX-5000 series, FTDX-3000/D, FTDX-1200, FT-2000/D, FT-991A, FT-891 and the FT-450/D as well as many other Yaesu rigs. NOTE: Do NOT use this microphone on the following: FT-2400H / -7400 series, FT-2500 or FT-8500. Damage may result from modular jack wiring incompatibility. Other included features are: * Reversible cabling for 8-pin round or 8-pin modular use * 3-pin XLR output for FTDX-9000 * Record and playback capability (20 seconds), to confirm the audio tonality * Large red TX LED Indicator * Large Graphic Equalizer / Frequency Response Scope LCD Display with anti-reflective coating * Headphone jack * Touch PTT key lock * Built-in low-cut filter to shape the low frequency response * Cannon-type (XLR) output plug connector * Audio output volume control for headphones Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Supplied Accessories: * TBC (Treble Boost Cowling) * Microphone cable * AC adapter * Operating Manual Your Yaesu transceiver features transmit audio circuitry that is some of the best in the world. Tailor the sound reaching that circuitry with Yaesu M-1 Reference Microphones from DX Engineering!
( 16 )
$899.99