Availability
3 Results Found For "day"
ACOM 1500 HF + 6 Meter Linear Amplifiers
ACOM 1500 HF + 6 Meter Linear Amplifiers are user-friendly and look after themselves. They are designed to safely withstand up to 300 watts of reflected power and up to 100 milliseconds duration of drive spikes. These amplifiers also continue to function with "soft" AC mains and will deliver more than half power at only 85 percent of nominal mains voltage. They can withstand voltage drops for up to 10 milliseconds and can tolerate 15 percent mains voltage spikes. This level of tolerance is especially important on Field Day, during DXpeditions, and at portable operating events where emergency power is relied upon. Please see the SPECIAL Note, below. The True Resistance Indicator (TRI) is a powerful tuning aid that helps the operator to quickly and precisely match the antenna impedance to the optimum tube load impedance. The auto-operate function (when enabled) maintains the amplifier in the OPERATE mode, thus avoiding unnecessary manual operations. Your ACOM amplifier will enable you to change antennas virtually instantaneously and allow you to use your antennas over wider frequency ranges. Broadband input matching presents a very good load to the transceiver over the entire spectrum of 1.8-54 MHz. These amplifiers produce virtually-silent QSK. The input bypassing and vacuum antenna relays are virtually silent even in the CW QSK mode; thanks to specially designed mounting hardware. ACOM 1500 amplifiers utilize a single 4CX1000A ceramic and metal radial-beam tetrode vacuum tube with plate dissipation of 1,000 watts. Tube protection includes permanent monitoring and automatic protection of plate and grid voltages and currents, as well as the exhaust air temperature. These pieces of data are essential to indicate 4CX1000A operating conditions. All ACOM 1500 amplifier status indications are explained via detailed text displayed on the dot matrix, high brightness, vacuum fluorescent display (VFD). LED indicators are provided for Power, Operate mode, Attenuation-on, Transmit, Selected antenna output, and ON/OFF conditions. * Frequency Coverage: 1.8-54 MHz * Power Output: 1,500W PEP, 1,200W continuous carrier; for continuous carrier transmissions longer than 15 minutes the external auxiliary fan must be installed * Intermodulation Distortion: Better than 35dB below PEP rated output * Hum and noise: Better than 40dB below rated output * Harmonic Output Suppression: 1.8-21.5 MHz; 50dB below rated output, 24-54 MHz; 66dB below rated output * Input and Output Impedance: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-54 MHz (no tuning, no switching); Bypass path: VSWR less than 1.1:1, 1.8-54 MHz continuously * RF Gain: 13dB typically, frequency response less than 1dB (60-85 W drive power for rated output) * Primary Power: 100-264V (100, 110,120, 200, 210, 220, 230 and 240V nominal taps), 50-60Hz, single phase, 3500VA consumption at rated output * SPECIAL Note: Order part number AOM-1500 to wire the AC plug yourself; order part number AOM-1000-240 for pre-wired 240 volt operation * Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations * Size: 16.6 x 14 x 7.7 in. * Weight 58.4 lbs. * Operating environments: Temperature range 0 to 50 degrees C, Humidity up to 95 percent at 35 C * Altitude: up to 3,000m (10,000ft) above sea level without output deterioration Note: For additional information, please look at the files under the "Documentation" tab. Why not allow yourself to enjoy the finest amplifier? Order one of your own ACOM 1500 HF + 6 Meter Legal Limit Linear Amplifiers from DX Engineering and give your signal a nice boost! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.
( 14 )
$5,122.99
ACOM 2100 HF + 6 Meter Linear Amplifiers
The ACOM 2100 is a complete and self-contained linear amplifier that covers all Amateur bands from 1.8 through 54 MHz and provides over 1500W PEP or continuous carrier output power, typically at only 40 to 55 watts drive. The 2100 utilizes a single 4CX1000A ceramic and metal radial-beam tetrode vacuum tube with plate dissipation of 1,000 watts. This manually tuned amp features many automatic functions. Tube protection includes permanent monitoring and automatic protection of plate and grid voltages and currents, as well as the exhaust air temperature, essential data that indicates the power tube operating conditions. The 2100 amplifier features virtually silent high-speed break-in CW (QSK). The input bypassing and vacuum antenna relays are virtually silent even in the CW QSK mode; thanks to specially designed mounting hardware. The 2100 is designed to safely withstand up to 400 watts of reflected power and up to 100 milliseconds duration of drive spikes. Additionally, these amplifiers continue to function with "soft" AC mains and will deliver more than half power at only 85 percent of nominal mains voltage. They can withstand voltage drops for up to 10 milliseconds and can tolerate 15 percent mains voltage spikes; especially important on Field Day, during DXpeditions, and at portable operating events where emergency power is relied upon. Be sure to read the SPECIAL Note, below. The True Resistance Indicator (TRI) is a powerful tuning aid that helps the operator to quickly and precisely match the antenna impedance to the optimum tube load impedance. The auto-operate function (when enabled) maintains the amplifier in the OPERATE mode, thus avoiding unnecessary manual operations. Broadband input matching presents a very good load to the transceiver over the entire spectrum of 1.8-54 MHz. Your 2100 will enable you to change between three antennas virtually instantaneously and allow you to use your antennas over wider frequency ranges. All ACOM 2100 amplifier status indications are explained via detailed text displayed on the high brightness OLED display. LED indicators are also provided for Power, Operate Mode, Attenuation-on, Transmit and Selected Antenna output. ACOM 2100 Features and specifications: * Frequency Coverage: 1.8-54 MHz * Power Output: 1,500W PEP, 1,500W continuous carrier; for continuous carrier transmissions longer than 15 minutes the external auxiliary fan must be installed * Intermodulation Distortion: Better than 32dB below PEP rated output * Hum and noise: Better than 40dB below rated output * Harmonic Output Suppression: 1.8-29.7 MHz; 50dB below rated output, 50-54 MHz; 66dB below rated output * Input and Output Impedance: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-54 MHz (no tuning, no switching); Bypass path: VSWR less than 1.1:1, 1.8-54 MHz continuously * RF Gain: 13.5dB typically, frequency response less than 1dB (40-55 W drive power for 1,500 watts output) * Primary Power: 100-264V (100, 110,120, 200, 210, 220, 230 and 240V nominal taps), 50-60Hz, single phase, 3500VA consumption at rated output * Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations * Size: 17.5 x 14.7 x 8.0 in. * Weight 64.6 lbs. * Operating environments: Temperature range 0 to 50 degrees C, Humidity up to 95 percent at 35 C * Altitude: up to 3,000m (10,000ft) above sea level without output deterioration Why not allow yourself to enjoy the finest amplifier? Order your own ACOM 2100 HF + 6 Meter Linear Amplifier from DX Engineering and give your signal a nice boost! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.
( 31 )
$5,687.98
HA8DU DU4000AL Automatic Antenna Tuners
HA8DU DU4000AL Automatic Antenna Tuners offer advanced automation and display features that are truly unique for a 4kW HF antenna tuner, making this unit the modern-day station command center for automatic band, antenna, and memorized tuning selections. An intuitive 5-color, 5 in. touch screen provides complete control, status, and metering functionality for all station operations, including frequency readout, Forward and Reverse Power and SWR, multiple electronically variable Capacitors "TUNE", and an electronic 11- position Inductor "SWITCH" selector. The DU4000AL also features complete tuning memorization of four rear panel antenna ports as well as direct voltage control of an External 8-port Antenna Switch and Stack Match Switching. It interfaces with all types of Amateur transceivers, with the capability to use an RS-232 interface in-line between specific Yaesu, Kenwood, or Elecraft transceivers and the PC. Or, use this tuner's direct Icom "Remote" CI-V input while connecting the transceiver to the PC by USB. To top it off, the DU4000AL can be operated remotely over the Internet via LAN-Ethernet, supported by a Windows application. The DU4000AL is an automatic memory tuner that you initially program for each antenna and every applicable band segment. Subsequent operations on any preprogrammed frequency range, detected continuously by the transceiver interface, will automatically switch to the correct antenna switch position and tuning values, without transmitting, within 1 to 1.5 seconds, making this tuner truly contest- and DX-ready. The bar has been set very high for the competition. The last tuner you will ever need is the HA8DU DU400AL. Specifications of the HA8DU DU4000AL: * Frequency: 1.8 to 30 MHz * RF Input Impedance: 50 ohm * RF Input Power: 4 kW maximum at antenna SWR below 3:1 * RF Input Required: 50 watt minimum to 150 watt maximum during tuning * Programmed Retuning Time: 1 to 1.5 seconds maximum * Width: 13.386 in. (340mm) * Depth: 18.504 in. (470mm) * Height: 6.102 in. (155mm) Menu Settings: * CAT * Antenna Switch * Display * Network * Clear User Settings--Current Band * Clear User Setting--All Bands * Antenna Autoset--On/Off * Blower Set--Temperature, PTT, or Always On
( 1 )
$5,329.99