Availability
8 Results Found For "field"
Clearance
2026 ARRL Field Day Stickers
Show your pride in ARRL Field Day with this vibrant red, white, and blue vinyl sticker featuring the 2026 theme "Amateur Radio: A National Resource." Designed with a durable matte finish, it's ideal for laptops, tumblers, suitcases, notebooks, and other smooth surfaces. Printed on thick, high quality vinyl, this sticker adds a bold splash of color while standing up to everyday use. Whether you're attending an ARRL Field Day event in person or participating remotely, it's a simple and eye catching way to celebrate Field Day weekend and show your support for amateur radio.
( 2 )
$2.00
$1.20
DX Engineering RG-6U 75-ohm Flooded Quad Shield Coaxial Cable
DX Engineering RG-6U 75-ohm Flooded Quad Shield Coaxial Cable is our top-of-the-line, direct-bury RG-6. It has low RF signal loss and provides greater protection against electromagnetic interference. Available cut-to-length by-the-foot or in 1,000 ft. spools, this is the best ultra-high quality RG-6/U self-healing quad-shield cable solution. This cable may be terminated in the field with black EX6XL Type-F Universal Compression Connectors, also available from DX Engineering. DXE-RG-6UFQ cable is ideal for many receiving applications including active or passive HF Amateur Radio and SWL receive antenna arrays and systems, LW and MW magnetic loop antennas, Beverage antennas, over-the-air TV, AM and FM broadcast reception, CATV systems and video distribution and satellite radio installations such as Sirius/XM. In fact, the low-loss characteristic of our RG-6 cable is excellent for digital audio up through microwave frequencies of satellite radio systems! Our RG-6 flooded quad shield cable has gas-injected polyethylene foam dielectric for the lowest loss and maximum moisture resistance. With an 18 AWG copper-clad steel center conductor it is extremely strong and durable. Two foil shields plus two high-density aluminum braids provide ultimate four-layer RF shielding. The waterproof UV protected black jacket is made with a tough and flexible polyethylene (PE). This cable is infused with a flooding compound that provides a permanent barrier to moisture and is self-healing to minor cuts. The nominal impedance of DXE-RG-6UFQ cable is 75 ohms with a nominal Velocity Factor of 82% (VF = 0.82). The minimum bend radius is 2.500 in. Beware of cheaply made cable with unknown impedance and loss characteristics. If some other cable is substantially less expensive, that should tell you something, right? DX Engineering RG-6U 75-ohm Flooded Quad-Shield Coaxial Cable is absolutely the best RG-6 quad-shield cable available and it is RoHS compliant! Check these super low attenuation figures! 5 MHz: 0.6 dB/100 ft. 30 MHz: 1.1 dB/100 ft. 55 MHz: 1.6 dB/100 ft. Losses at 1.8 MHz are virtually insignificant over several hundreds of feet of this coaxial cable. It can be used for low band receive antennas and arrays without the complications of using a preamp at the antenna. Are you installing or upgrading a Low Band receiving antenna or a CATV or satellite video distribution system that uses RG-6/U Quad cable? If so, then order the new benchmark in RG-6 cable: DX Engineering RG-6U 75-ohm Flooded Quad Shield Coax. Your efforts will be rewarded with the results that you expect, using the best cable from DX Engineering.
( 8 )
$0.37
DX Engineering RG-6U 75-ohm Standard Quad-Shield Coaxial Cable
DX Engineering RG-6U 75-ohm Standard Quad-Shield Coaxial Cable is our regular RG-6U with a Type II PVC jacket, low loss and greater protection against electromagnetic interference. Available cut to length or in 1,000 ft. spools; this is a high-quality standard RG-6U quad-shield cable. This cable may be terminated in the field with black EX6XL Type-F Universal Compression Connectors, also available from DX Engineering. (Please Note: Also available is our waterproof direct-bury PE jacket RG-6 version: search 75-ohm Flooded Quad Shield, DXE-RG6UFQ-CTL and DXE-RG6UFQ-1000.) DXE-RG-6UQ cable is ideal for many applications, such as active or passive HF Amateur Radio and SWL receive antenna arrays and systems, LW and MW magnetic loop antennas, Beverage antennas, over-the-air TV, AM and FM broadcast reception, CATV systems and video distribution as well as satellite radio installations like Sirius/XM. In fact, the low-loss characteristic of our RG-6 cable is excellent for digital audio up to the microwave frequencies that Satellite Radio systems employ! Our RG-6 quad shield cable has gas-injected polyethylene foam dielectric for the lowest loss and maximum moisture resistance. With an 18 AWG copper-clad steel center conductor it is extremely strong and durable. Two foil shields plus two high-density aluminum braids provide ultimate four-layer RF shielding and the UV protected black jacket is made with a tough, but very flexible, PVC. The nominal impedance of DXE-RG-6UQ cable is 75 ohms, and it has a nominal Velocity Factor of 82%. The minimum bend radius of this cable is 2.50 in. Beware of cheaply made cable with unknown impedance and loss characteristics. If some other cable is substantially less expensive, that should tell you something, right? Please Note: Also available is our direct-bury PE jacket RG-6 version: search 75-ohm Flooded Quad Shield, DXE-RG6UFQ and DXE-RG6UFQ-1000. This DX Engineering RG-6UQ 75-ohm Standard Quad-Shield Coaxial Cable is a Type-II PVC jacket RG-6 quad-shield cable that is RoHS compliant. Check out these low attenuation figures: 5 MHz: 0.6 dB/100 ft. 30 MHz: 1.1 dB/100 ft. 55 MHz: 1.6 dB/100 ft. Losses at 1.8 MHz are virtually insignificant over several hundreds of feet of this coaxial cable. It can be used for low band receive antennas and arrays without the complications of using a preamp at the antenna. Are you installing or upgrading a Low Band receiving antenna or a CATV or satellite video distribution system that uses RG-6/U Quad cable? Order DX Engineering RG-6U 75-ohm Standard Quad-Shield Coaxial Cable.
( 1 )
$0.39
DX Engineering Nomad Guy Ring Kits
DX Engineering Nomad Guy Ring Kits provide a reliable solution for stabilizing DX Engineering NOMAD masts in a variety of operating conditions. Designed as durable guy rings specifically for NOMAD masts, these kits feature precisely placed holes that enable secure 3-way guying for improved support. They are engineered to fit both 0.260 and 0.855 inch outside diameter mast tubes. Each kit includes six convenient hooks for attaching guy ropes. Offered in a 2-pack, these guy ring kits help ensure the stability and performance that operators depend on in the field.
Not Yet Reviewed
$9.99
Digirig Gear Organizer Pouches
Digirig Gear Organizer Pouches keep your Digirig Mobile and accessories neatly stored and ready to go. Designed with just the right dimensions to fit your Digirig interface and connection cables, these compact pouches are perfect for portable and field operations. Inside, a convenient mesh pocket helps separate your USB cable from other components, keeping everything organized and tangle-free. Available in three rugged colors—Special Ops Black, Desert Storm, and Forest Green—they not only protect your gear, but also matches your tactical style. Whether you're heading to the field or just keeping your shack tidy, the Digirig Gear Organizer Pouch is a must-have for every ham on the move.
( 1 )
$9.95
DX Engineering Logo Umbrellas
DX Engineering Logo Umbrellas will help you enjoy your favorite event or errand no matter what Mother Nature is throwing at you. Whether you're out in the rain, sleet, or snow, these sturdy yet attractive DX Engineering umbrellas will help you create the driest spot in the area. Of course, they also show off your support for your favorite Amateur Radio supplier! Their opaque alternating red and black panels are excellent just to grab some shade from the hot summer sun for a bit. Think about all of those 90-degree sunny Field Days! Rain or sun, They have a large 36 in. diameter, you'll even have room for a friend! Be prepared for inclement weather with one of these DX Engineering Logo Umbrellas, exclusively from your friends at DX Engineering!
( 2 )
$9.99
Firestik Antenna Company Hobby Hubs
Firestik Antenna Company Hobby Hubs allow for the user to experiment with counterpoise layouts, or to design a discone antenna. This hub is made from a 0.100" thick sheet of steel with a inner diameter of 3.5" and an outer diameter of 5". The hole in the center of the plate is 0.5" to accept standard 3/8-24" stud mounts and there are 8 ears around the outside that are 0.75" away from the center circle. Each of the ears has two 0.170" holes to use #10 machine screws to mount a counterpoise field to the plate.
Not Yet Reviewed
$8.99
ARRL Cycle 25 Flyer
ARRL Cycle 25 Flyer - Our dog-safe neon-orange flying disc is a fun way to celebrate Cycle 25 with your canine or human friends at the beach, park, or in your backyard. Bring one to your next gathering or to Field Day, for your crew to flex their muscles when they aren't on the air!
Not Yet Reviewed
$5.00