Availability
20 Results Found For "in-line"
Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines
Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines are constructed from tough Aramid fiber. Aramid fiber features excellent dielectric properties and a strength-to-weight ratio five times greater than steel guy wire! Add to that their low-stretch and low-creep characteristics—and you have an ideal material for broadcast tower guys. Today's Phillystran tower guying systems based on Aramid fiber are the result of many years of real-world experience. Phillystran HPTG-I systems eliminate the problems associated with EHS steel cable, such as electromagnetic interference (EMI), radio frequency interference (RFI), signal suppression, directional irregularities and white-noise arcing. You may not have a broadcast tower, but your Amateur Radio tower can benefit by using Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines from DX Engineering!
( 23 )
$0.99
—
$3.75
QuickCar In-Line ATC Fuse Holder Kits
QuickCar In-Line ATC fuse holder kits include holder and ATC fuses. Install in a power wire to protect valuable electrical components. Includes 12-gauge in-line fuse holder and one each: 5 amp, 10 amp, 15 amp, 20 amp, 25 amp, 30 amp fuses.
Not Yet Reviewed
$6.95
Loos Guy Line Clamp Kits
Loos Guy Line Clamp Kits are designed for use EHS steel guy lines. They are manufactured from durable forged steel and have a galvanized finish for protection against the outside elements. These kits include six individual clamps. In normal usage, six clamps is the number required to secure both ends of a single guy line. Order Loos Guy Line Clamp Kits from DX Engineering. NOTE: Phillystran for Yagi boom support, typically HTPG-1200I, may be clamped with this type of hardware. Phillystran that is used for tower guying, HTPG-2100I and larger, must be properly terminated with Guy Line Big Grips.
( 3 )
$8.65
Preformed Line Products Big Grip End Sleeves
Preformed Line Products Big Grip End Sleeves are used to finish the application of a dead end on a guy line. The End Sleeves, also known and "Grip Clips" or "Ice Clips" secure the grip tail ends and prevent them from opening or unraveling from ice intrusion or vibration. Be sure to select the proper size for the application.
Not Yet Reviewed
$7.29
—
$8.29
DX Engineering 450 Ohm Ladder Line
DX Engineering 450 Ohm Ladder Line is a transmitting grade low-loss parallel-wire RF feedline featuring a strong, waterproof, UV black polyethylene insulation. To maintain the wire spacing between the conductors while reducing losses, the integral flat plastic material alternates with rectangular openings, which explains the "Window Line" nickname. Capable of handling over 3 kW of RF power, DXE-LL450 is a very low-loss transmission line across HF. It is ideal for exceptionally long feedline runs and for low band wire antennas operated on multiple bands on which the feedpoint impedance can vary significantly, causing mismatch and elevated SWR. Unlike coaxial cables, DX Engineering DXE-LL450 Ladder Line maintains low RF losses at frequencies where antenna feedpoint impedance mismatches cause high SWR. It can provide significantly higher efficiency than coaxial cable when feeding non-resonant antenna systems that are matched with a wide impedance range antenna tuner. DXE-LL450 450 Ohm Ladder Line is a high-quality flat RF feedline, about 0.938 in. wide (15/16") with two 16-gauge copper-clad steel wire conductors (29 AWG x 19 strands) that provide the strength to hold up for long spans between supports without twisting. It exhibits a nominal impedance of around 400 Ohms and a nominal Velocity Factor of 91 percent. For proper performance, LL450 Ladder Line must be installed suspended through the air supported by insulators every 25 ft. or less, kept at right angles and several inches away from other wires, and at least one foot away when run parallel to the earth or large metal surfaces. Installing with an axial twist of one turn per 10 ft. can reduce wind, rain and ice loading, RF coupling and RF noise. DXE-LL450 can be mounted with insulators and suspended on metal or wood posts or run along a wood fence line, only if the fence has no wires or metal mesh that couples RF noise or unbalances the feedline. Often used for non-resonant wire doublet antennas, DXE-LL450 can be more easily terminated outdoors to a DXE-MC20-C4-1 4:1 Balun or a DXE-MC20-1-1T 1:1 Balun. Then, with no inline switches or relays, directly connect the antenna system to a typical indoor wide range antenna tuner using a solid dielectric coax, not foam dielectric, to handle high voltage at high SWR. DXE-213U or DXE-214 Coaxial Cable Assemblies 12 or 18 ft. with PL-259s are perfect for this method, which eliminates the need for a special balanced tuner, and avoids the losses and detuning effects caused by unbalancing when ladder line is routed indoors near wires and ducts. DXE-LL450 is sold by the foot, previously sold as DXE-LL450-CTL, this is the same ladder line with a new part number. It is also available in spools of 500 ft. DXE-LL450-5C and 1,000 ft. DXE-LL450-1K, which are specified for DX Engineering Reversible Beverage System Antennas. NOTE: This type of feedline is intended for MF and HF use and is not suitable for use above 54 MHz. Also consider DX Engineering 300 Ohm Ladder Line, DXE-LL300, an excellent alternative low-loss HF feed line that reduces impedance extremes on non-resonant HF multiband antenna systems.
( 63 )
$1.18
DX Engineering 300 Ohm Ladder Line
DX Engineering 300 Ohm Ladder Line is a transmitting grade low-loss parallel-wire RF feedline featuring a strong, waterproof, UV black polyethylene insulation. To maintain the wire spacing between the conductors while reducing losses, the integral flat plastic material alternates with rectangular openings, which explains the "Window Line" nickname. Capable of handling over 2.5 kW of RF power, DXE-LL300 is a very low-loss transmission line across HF that is ideal for long feedline runs. It is an excellent feedline choice for a low band non-resonant wire antenna operated on multiple bands on which the impedance varies significantly, causing mismatches and elevated SWR. Unlike coaxial cables, DX Engineering DXE-LL300 Ladder Line maintains low RF losses at frequencies where impedance mismatches cause high SWR. The lower impedance of DX Engineering 300 Ohm Ladder Line is actually better suited than 450 ohm ladder line for limiting the impedance extremes of non-resonant multiband antennas. It can provide significantly higher efficiency than coaxial cable for feeding non-resonant antenna systems that are matched with a wide impedance range antenna tuner. DXE-LL300 Ladder Line is a flat, high-quality RF feedline, about 0.438 in. wide with two 18-gauge copper-clad steel wire conductors that provide the strength to hold up for long spans between supports without twisting. It exhibits a nominal impedance of 275 Ohms and a nominal Velocity Factor of 88 percent. For proper performance, LL300 Ladder Line must be installed suspended through the air supported by insulators every 25 ft. or less, kept at right angles and several inches away from other wires, and at least one foot away when run parallel to the earth or large metal surfaces. Installing with an axial twist of one turn per 10 ft. can reduce wind, rain and ice loading, RF coupling and RF noise. DXE-LL300 can be mounted with insulators and suspended on metal or wood posts or run along a wood fence line, only if the fence has no wires or metal mesh that couples RF noise or unbalances the feedline. Most often used for non-resonant wire doublet antennas, dipoles, and inverted-vees, DXE-LL300 can be more easily terminated outdoors to a DXE-MC20-1-1T 1:1 Balun. Then, with no inline switches or relays, directly connect the antenna system to a typical indoor wide range antenna tuner using a solid dielectric coax instead of foam dielectric, to handle high voltage at high SWR. DXE-213U or DXE-214 Coaxial Cable Assemblies 12 or 18 ft. with PL-259s are perfect for this method, which eliminates the need for a special balanced tuner, and avoids the losses and detuning effects caused by unbalancing when ladder line is routed indoors near wires and ducts. DXE-LL300 is sold by the foot, previously sold as DXE-LL300-CTL, this is the same ladder line with a new part number. It is also available in spools of 500 ft. DXE-LL300-5C and 1,000 ft. DXE-LL300-1K. NOTE: This type of feedline is intended for MF and HF use and is not suitable for use above 30 MHz.
( 25 )
$0.77
Gripple Logo Setting Keys
These Gripple Logo Setting Keys are used to release the internal wedges that clamp guy line cables in place. Simply insert one of these keys into the cable-grip and push! You will separate the wedges and relieve the pressure. A must for re-tensioning cables or for removing the grips, these Gripple Logo Setting Keys are your key to success!
Not Yet Reviewed
$6.69
Gripple Lockable Release Keys
These Gripple Lockable Release Keys are used to release the internal wedges clamping guy line cables in-place. Simply insert one of these keys into the cable-grip and push! You will separate the wedges and relieve the pressure. A must for re-tensioning cables or for removing the grips, these Gripple Lockable Release Keys are your key to success!
Not Yet Reviewed
$1.09
bhi Ltd Interchangeable DC Power Adapters
bhi Ltd Interchangeable DC Power Adapters are for use with the bhi Compact In-Line Module and converts a 2.1mm male power connector to a 1.3mm female connector for use with any center-positive DC power supply.
Not Yet Reviewed
$8.99
DX Engineering Pocket Pad Notebooks
"I should've written that down." How many times have you said that? Now you CAN write it down with DX Engineering Pocket Pad Notebooks. These pocket-size notebooks are perfect for keeping with you when you are on the go. Things you want to remember for later can go in the book instead of draining from volatile RAM. Of course, they are also good for the XYL's shopping lists, leaving someone a note, your own DX Engineering wish list and other memory-sensitive stuff. These 3 1/2 by 5 1/4 in. shirt-pocket notebooks contain 80 lined pages AND sport the DX Engineering logo. DX Engineering contact information is right on the front cover! Order some of your own DX Engineering Pocket Pad Notebooks today. (Write it down so you don't forget!)
( 6 )
$7.99
PanaVise Mobile Electronics Mounts and Accessories
PanaVise manufactures the most complete line of mobile electronics mounts and accessories in the world! Whether your installation calls for a window mount, pedestal mounts, flex mounts, or convenient mounting accessories, there's an off-the-shelf solution for your mobile device mounting needs. Their powdercoated and corrosion-resistant components ensure long life and durability! With the explosion in mobile electronics - especially satellite radios and GPS units - there's an intense consumer need for a complete line of reliable window mounts. PanaVise has designed a powerful line of window mounts with plenty of flexibility to meet this demand! Pedestal mounts from PanaVise are the industry standard! A wide range of styles and overall installation heights deliver solid, trouble-free performance. PanaVise Flex Mounts have double-wound shafts for maximum rigidity and continuous reliability. The point: They're very durable and stay where you put them! The complete line of PanaVise Mobile Electronics Mounts and Accessories brings a new dimension to customer satisfaction. You may select from a wide variety of accessories that will enhance any installation! Be sure to contact DX Engineering for your PanaVise Mobile Electronics Mounts and Accessories solutions today!
( 1 )
$4.99
—
$8.99
Sunex Tools Internal Star Impact Sockets
Sunex Tools internal star impact sockets can tackle the toughest jobs with a chrome molybdenum alloy steel grip that just won't slip! No doubt the strongest impact socket line around, Sunex Tools impact sockets' solid durability keeps them driving through job after job. Whatever your needs, Sunex Tools offers a wide range of impact socket sizes and styles to fulfill every one.
Not Yet Reviewed
$5.99
—
$7.99
Times Microwave Systems® Bulk Coaxial Cables
Times Microwave Systems Bulk Coaxial Cables are recognized as superior RF cable products. The standard Times Microwave LMR® is a UV-resistant polyethylene jacketed cable designed for 20-year service in outdoor use. Depending upon size, LMR® cable has a solid copper or copper clad solid aluminum center conductor. Their bending and handling characteristics are significantly better than air-dielectric and corrugated hard line cables. LMR-DB® cable has a waterproofing compound to prevent moisture intrusion after a minor abrasion. Times Microwave Systems EZ Series and TC Series connectors are suitable for use on standard LMR® and LMR-DB® cables. Times Microwave Systems LMR® UltraFlex (UF) cables have a stranded bare copper center and a rubber jacket (black thermoplastic elastomer) designed for repeated bending. Times Microwave TC Series crimp connectors are designed for use on LMR® UltraFlex cables. LMR®'s RF shielding is typically 50 dB greater than standard coax. The copper shield and multi-ply bonded foil outer conductor is rated conservatively at greater than 90 dB. That's better than 180 dB isolation between two adjacent cables. A wide variety of connectors are available for LMR cables, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimped outer attachment using standard hex-crimp methods. Times Microwave Systems is a premier supplier of coaxial cable products worldwide. Only Times offers a range of products specifically developed to perform as needed in the most diverse range of environments. Times Microwave Systems has over 60 years of experience in building the highest-quality cables. Order LMR® coaxial cables from DX Engineering and put Times Microwave Systems Bulk Coaxial Cables to work for you! LMR® is a registered trademark of Times Microwave Systems.
( 106 )
$0.90
—
$6.09
DX Engineering Shielded Control Cable
DX Engineering Shielded Control Cable is a high quality shielded cable that is suitable for indoor or outdoor use. It features nine #24 AWG annealed tinned copper stranded conductors with color coded PVC insulation and aluminum foil shielding, plus a bare #24 AWG stranded tinned copper drain wire. This RoHS compliant cable supports an eight port remote switch with 1-of-8 control lines plus a common ground conductor AND a separate shield conductor. This cable has a thick, durable, chrome-gray PVC jacket. Plus, using a cable that has stranded conductors relieves the worry of breaking one of the conductors; unlike a different type of cable made with solid wire. This shielded control cable is ideal for use with DX Engineering Remote Antenna Switches, Four Square and Phased arrays, and should be considered a great choice for any of your low-current, custom remote switching applications. This cable is excellent for building accessory cable assemblies, RS-232 data cables, switching cables, and for control of low-voltage relays including receiving and transmitting antenna arrays. This cable is not intended for use with rotators or other medium current applications. You may order DX Engineering Shielded Control Cable by the foot in any lengths up to 500 feet and is available in a 1,000 ft. roll. Here are the "specs" on this very useful shielded control cable: Number of stranded conductors: 10 Number of insulated conductors: 9 Insulated conductor AWG (Strands): 24 (7/32) Drain wire AWG (Strands): 24 (7/32) Insulation nominal wall thickness: 0.010 in. Nominal Capacitance (pF/ft.): 30 Jacket nominal wall thickness: .035 in. Nominal outer diameter: 0.240 in. Cable Temperature Range: -20 to 80 degrees C Cable Voltage: 300 V
( 8 )
$2.09
DX Engineering RG-6U 75-ohm Flooded Quad Shield Coaxial Cable
DX Engineering RG-6U 75-ohm Flooded Quad Shield Coaxial Cable is our top-of-the-line, direct-bury RG-6. It has low RF signal loss and provides greater protection against electromagnetic interference. Available cut-to-length by-the-foot or in 1,000 ft. spools, this is the best ultra-high quality RG-6/U self-healing quad-shield cable solution. This cable may be terminated in the field with black EX6XL Type-F Universal Compression Connectors, also available from DX Engineering. DXE-RG-6UFQ cable is ideal for many receiving applications including active or passive HF Amateur Radio and SWL receive antenna arrays and systems, LW and MW magnetic loop antennas, Beverage antennas, over-the-air TV, AM and FM broadcast reception, CATV systems and video distribution and satellite radio installations such as Sirius/XM. In fact, the low-loss characteristic of our RG-6 cable is excellent for digital audio up through microwave frequencies of satellite radio systems! Our RG-6 flooded quad shield cable has gas-injected polyethylene foam dielectric for the lowest loss and maximum moisture resistance. With an 18 AWG copper-clad steel center conductor it is extremely strong and durable. Two foil shields plus two high-density aluminum braids provide ultimate four-layer RF shielding. The waterproof UV protected black jacket is made with a tough and flexible polyethylene (PE). This cable is infused with a flooding compound that provides a permanent barrier to moisture and is self-healing to minor cuts. The nominal impedance of DXE-RG-6UFQ cable is 75 ohms with a nominal Velocity Factor of 82% (VF = 0.82). The minimum bend radius is 2.500 in. Beware of cheaply made cable with unknown impedance and loss characteristics. If some other cable is substantially less expensive, that should tell you something, right? DX Engineering RG-6U 75-ohm Flooded Quad-Shield Coaxial Cable is absolutely the best RG-6 quad-shield cable available and it is RoHS compliant! Check these super low attenuation figures! 5 MHz: 0.6 dB/100 ft. 30 MHz: 1.1 dB/100 ft. 55 MHz: 1.6 dB/100 ft. Losses at 1.8 MHz are virtually insignificant over several hundreds of feet of this coaxial cable. It can be used for low band receive antennas and arrays without the complications of using a preamp at the antenna. Are you installing or upgrading a Low Band receiving antenna or a CATV or satellite video distribution system that uses RG-6/U Quad cable? If so, then order the new benchmark in RG-6 cable: DX Engineering RG-6U 75-ohm Flooded Quad Shield Coax. Your efforts will be rewarded with the results that you expect, using the best cable from DX Engineering.
( 8 )
$0.37
DX Engineering Shielded CAT5e Control Cable
DX Engineering Shielded CAT5e Control Cable is a high-quality, shielded outdoor FTP (Foil Twisted Pair) CAT5e cable. It features four twisted pairs of 24 AWG solid wire with aluminum foil shielding, plus a solid tinned copper drain wire, providing a total of 9 conductors for low voltage AC or DC switching applications. The durable polyethylene jacket is rated for direct burial. Another feature of DX Engineering Shielded CAT5e Control Cable is the "rip cord," which allows for easy stripping of the heavy jacket without worry about nicking or accidentally cutting the conductors. DX Engineering Shielded CAT5e Control Cable is an excellent choice for use in all outdoor applications, including switching, networking, data transfer, and phone lines. As a data transfer line, it supports 10/100/1,000 Mbps.
( 1 )
$0.78
DMV Y-Adapter Stereo Separation Cables
DMV Y-Adapter Stereo Separation Cables have a versatile length of 5 ft. 10 in. with one stereo male 3.5mm TRS plug and two independent RCA phono male plugs. The 3.5mm TRS plug is wired as Tip=Left=Red phono and Ring=Right=White phono, atypical for audio. Of course, the common shield of the 3.5mm plug goes via the shield of the cables to both RCA phono shields. For use on TopTek Amplifiers the 3.5mm plug tip is connected to the Red phono plug center that needs to be grounded by the transceiver amplifier keying line when the radio PTT is keyed. When used for an Icom IC-705 Transceiver, this cable splits amplifier keying SEND and ALC. The Red phono plug connects to the "Relay" or "PTT IN" connection on an amplifier and the White phono plug center that is connected to the ring of the 3.5mm TRS is an ALC input provided for convenience. However, an ALC output isn't provided on most intermediate amplifiers that would be used with the IC-705. So that connector can be ignored. Yes, this stereo audio Y-adapter can be used as an "AUX" Cable to connect a 3.5mm stereo source, like a mobile device, to the AUX or other line level input of a stereo audio amplifier, but not a "phono" input. In some audio devices, this cable would provide "reversed" stereo if connected normally, because on this cable the Red plug is Left Channel and White plug is Right Channel, opposite from the way RCA phono patch cables are usually connected. That's not really a problem... just reverse them and rock on!
( 1 )
$5.99
Clearance
NTE Electronics Electrical Fuses
NTE Electronics electrical fuses represent an extensive line of quality fuses that are designed for replacement situations, as well as original equipment use. They are ideal for use in worldwide electronic, electrical power and automotive markets. Additionally, they are ideally suited for industrial motor protection and telecommunication network equipment. All NTE Electronics Electrical Fuses are RoHS compliant and most are UL/CSA approved. DX Engineering carries NTE Electronics Electrical Fuses in available blister packaging or convenient clamshell packs. Simply check for your size requirement and order yours today!
( 4 )
$6.99
$1.05
—
$3.50
Alinco Handheld Radio Accessories
Alinco Handheld Radio Accessories allow you to add the products you want to make your handheld radio more functional and personalized. Choose from battery packs, carrying cases, drop-in chargers and more. All of the accessories you want are available for your handheld radio. Whether a transceiver or general coverage receiver; VHF, UHF, dual or tri-band HT, Alinco's full line of accessories allow you to make your radio more handy and convenient to use. Order your Alinco Handheld Radio Accessories from DX Engineering… today!
( 53 )
$3.60
—
$9.99
West Mountain Radio DC Power Cables
West Mountain Radio DC Power Cables are ready to connect your equipment with a variety of DC connectors, including Anderson Powerpoles. They provide the user with a multitude of options for connecting RIGrunners or other West Mountain Radio DC power products to Amateur Radio equipment or other DC electronic devices. You'll find convenient cables to connect power from RIGrunners and other equipment. There is also an assortment of DC cables used to power HF transceivers, FM transceivers, and various electronic gadgets from Powerpole-equipped power sources. Many have Powerpoles already installed at one end! Connector types include HF-radio 6-pole connectors, alligator clips, coaxial power connectors, blade connectors, ring terminals, and more. It's clear that when you want to connect DC to just about anything else, you need to order from DX Engineering to get your West Mountain Radio DC Power Cables!
( 25 )
$9.95