Availability
82 Results Found For "never"
DX Engineering Regular Grade Never-Seez
DX Engineering Regular Grade Never-Seez is an anti-seize and lubricating compound that protects metal parts against rust, corrosion and galling. Anti-seize should be used before parts are assembled to prevent galling (cold welding) and assist in achieving proper hardware torque. It is highly recommended for use on steel, and especially stainless steel, hardware. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Regular Grade Never-Seez is long-lasting and is perfect for use wherever and whenever a metal hardware lubricant is required to prevent galling and seizing. It's perfect because it works before and after assembly.
( 4 )
$25.99
DX Engineering Mariner's Choice Never-Seez
DX Engineering Mariner's Choice Never-Seez is a heavy duty marine grade lubricant and sealant used to help protect against salt-water and salt-air contamination. This formula is for use in high moisture environments, preventing galling and galvanic corrosion. It protects against seizure, galling and corrosion in fresh and salt water environments with unparalleled resistance to water washout. Use DX Engineering Mariner's Choice Never-Seez on hardware wherever a seizing or galling protective lubricant is required.
Not Yet Reviewed
$36.99
Instant Rebate
Yaesu FT-65R 144/430 MHz Dual-Band HTs
Yaesu FT-65R 144/430 MHz Dual-Band HTs are very compact, ruggedly constructed handheld VHF/UHF rigs with three selectable power settings of 5W, 2.5W, or 0.5W. Their big front panel speaker provides a full 1 watt of crisp, clear audio. These units come supplied with a 1950mAh Li-ion battery pack capable of providing over 9 hours of operation. An optional, higher-capacity 2500mAh Li-ion battery is available for over 11.5 hours of operating time. A 2.5 hour rapid charger comes standard, making the transceiver ready to operate at any time. Yaesu's newly designed large, white LED displays are vibrant and highly visible. Four Quick Recall Keys (QRK) are user programmable to instantly recall favorite channels with just the push of a button. Other useful features include: versatile scanning capabilities, such as Programmable VFO Scan, Memory Scan, Priority Channel Scan, and Weather Alert Scan; WX Channels with "Severe Weather" Alert, PC Programming, Transceiver-to-Transceiver Cloning, FM Broadcast Receiver, Automatic Range Transponder System (ARTS), CTCSS/ DCS Operation, Busy Channel Lockout (BCLO), Automatic Power Off feature, and Transmitter Time Out Timer (TOT). VOX operation is available with the optional Earpiece Microphone SSM-512B. * Commercial Grade VHF / UHF: FT-65R transceivers are built to commercial grade standards, including their IP54 Rating for Dust and Water protection. MIL-810-C, D and E standards make these radios suitable for operation in the harshest of environments. * Powerful Output: With 5 Watts of reliable RF output power, this radio is sure to be heard. Never miss a call with One Watt of crisp, clear audio output from the oversized front panel speaker. * High Capacity Li-Ion battery: FT-65R transceivers are packaged with a powerful 1950 mAh Li-Ion battery pack, providing the radio with over 9 hours of operating time. Or upgrade to the optional high-capacity 2500 mAh Li-Ion battery pack for over 11.5 hours of extended operating time. To ensure minimal down time, FT-65R transceivers also come packaged with a 3.5-Hour rapid charger. * QRK (Quick Recall Key): Four Dedicated User-programmable Keys serve as shortcut keys to preferred menu options, or use the four dedicated recall keys to easily store and recall desired frequencies. * Versatile Scanning Capabilities: Programmable VFO Scan scans all channels in the desired frequency range; Memory Scan allows scanning of user selectable frequencies; Priority Channel Scan can be used to scan memory channels while making one channel a priority. Weather Alert Scan alerts the user when severe weather is approaching. * PC Programmable: These radios are capable of being programmed directly from a PC, making all of the advanced setup features a breeze! Use the optional software and SCU-35 programming cable to make programming a snap. * More advanced features: Tons of advanced features are loaded into this compact radio, including: Transceiver to Transceiver cloning with the optional SCU-36 clone cable, FM Band receiver equipped, ARTS (Automatic Range Transponder System), DTMF operation, CTCSS/DCS operation, TOT (time out timer), and more. Note: For additional information, please look at the files under the "Documentation" tab. For really versatile dual-band FM operation, consider one of these Yaesu FT-65R 144/430 MHz Dual-Band HTs from DX Engineering!
( 103 )
$119.95
Manufacturer Rebate
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers build upon its popular predecessor (ID-52A) and brings with it updated features that will delight amateur enthusiasts both at home and in the field. This upgraded handheld transceiver now features Enhanced Bluetooth® connectivity, which will allow you to connect to an Android device in Terminal and Access Point Modes, Dual operation of Terminal Mode and simplex/repeater operations and finally, an Updated USB-C charging/data port for faster connections and charging. This feature packed transceiver will allow you to enjoy portable operations like you've never seen before. The large 2.3 in. 230 X 280 pixel color display offers more information, an improved interface, with an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750mW of output so you never miss a contact. Additionally, the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. New Features: - Enhanced Bluetooth® – Connect your Android™ in Terminal and Access Point Modes - Dual operation of Terminal Mode and simplex/repeater operations - Updated USB-C charging/data port for faster connections and charging
( 6 )
$749.95
DX Engineering Coaxial RF Connector Adapters
DX Engineering Coaxial RF Connector Adapters feature a wide selection of high-quality coaxial adapters. These adapters are used for changing connectors to different types and genders as well as connecting RF cables and equipment with different types of connectors. Type N, UHF Male (PL-259), UHF Female (SO-239), BNC, Type F and mini-UHF adapters, DX Engineering Coaxial RF Connector Adapters are available to complete your RF connections. You never know when you will need one, so order several today!
( 233 )
$5.49
—
$63.99
Yaesu Handheld Li-Ion Battery Packs
Fast charging and lightweight, Yaesu Handheld Li-Ion Battery Packs are original equipment versions that look identical, and they fit and run your HT as designed. These Li-Ion packs are longer lasting than cheap substitutes and keep you on the air. Keep an extra pack charged up and on hand for those special event days with long hours of HT operations. You never know when that emergency will occur. When you need your handheld to work at full power, only trust original Yaesu Handheld Li-Ion Battery Packs from DX Engineering.
( 50 )
$49.99
—
$139.99
DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas
DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas are 43 ft. tall, high performance, 160 through 10 meter vertical antennas - designed from the ground up to offer ease of use, reliability and performance! New design and materials technology are used throughout. The patented* and massive SAF-T-TILT™ 3/8 in. thick rugged aluminum base allows easy, safe tilt action without the unsafe removal of mounting hardware -- as with some competitors' antennas! Now - using our ground-mounted vertical, you'll work DX as you never could with a low horizontal-dipole antenna! DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas require a special DX Engineering DXE-UN-43 UNUN with 150 ft. of RG-213 coax feed and your wide-range tuner - OR a automatic tuner at the base of the antenna without the UNUN.. These MBVE-5A verticals feature: * High strength Delrin® thermoplastic insulator that won't crack, splinter, peel or fail from exposure * Rugged structural grade type 6063-T832 drawn aluminum tubing radiator - the best alloy for high-strength, long-lasting antenna applications * New, massive, patented* SAF-T-TILT™ base allows safe raising and lowering of antenna without removal of fastening hardware * The fast taper antenna element provides the lowest wind resistance * Free-standing to 92 mph wind speeds * All Stainless Steel hardware - very durable and attractive MBVE-5A verticals include the antenna element, mounting plate with insulator, exclusive Patent Pending SAF-T-TILT™ Base, stainless steel hardware and clamps. Like any HF vertical, MBVE-5A verticals require a good ground radial system. 32 radials, 65 feet long are recommended. Fewer or shorter radials will work, but with some diminished results. For proper installation, additional materials are needed, but not supplied. You will need: * Mounting pipe--steel pipe that has 2.0 in. O.D. with 0.25 in. wall thickness, 4 ft. long -- standard 1-1/2 in. galvanized water pipe (with its 1.9 in. OD) is fine * Quick-Set or other concrete for mounting pipe installation * Radial wire and wire lugs--must use 14-gauge, stranded copper wire with PVC insulation. A minimum of 20 radials, each 32 feet long, should be used. * Penetrox A -- to ensure good connection between aluminum hardware and in-between aluminum tubing sections * Anti-seize compound, which should be used on the threads of all the stainless steel hardware to prevent galling Consider these new, cost-effective DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas and packages now available for your application: -- DXE-MBVE-5A 43 Ft. Antenna only -- DXE-MBVE-5A-4P Antenna Package with Radial Plate -- DXE-MBVE-5A-4UP Antenna Package with UN-43 UNUN -- DXE-MBVE-5A-4UPR Antenna Package with Radial Plate and UNUN Packages with Radial Plates include two extra hardware kits for a total of 60 possible radial wire connections. Packages that include the UNUN also include the UNUN mounting bracket. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *US Patents D654,063 and D654,064 DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas are high-performance verticals and antenna packages that allow you to access all HF bands with only one antenna solution. Order one of these premium-quality all-band HF verticals from DX Engineering and roam HF… freely!
( 9 )
$601.98
—
$989.61
DX Engineering Tilt Base Antenna Mounting Systems
The patented* DX Engineering Tilt Base Antenna Mounting Systems enable an operator to raise or lower an antenna in seconds, while leaving the base of the antenna securely attached to the mounting plate and post. DX Engineering Tilt Bases make it easy to tune your vertical, repair, or simply lower your antenna to a safe horizontal position long before bad weather hits. One person can install, raise and lower, and service their vertical antenna with our stainless steel Tilt Base; just walk it up or down. The Tilt Base prevents potential accidents when climbing a step ladder to tune the antenna, especially on soft ground. This is an essential tool that has helped countless hams eliminate the possibility of personal injury and damage to their ground-mounted vertical antenna. There is no need to remove brackets from the support posts and you will never again have to lift the entire weight of the antenna in order to tilt it down or tilt it up. Nearly two decades of customer comments about DX Engineering Tilt Bases (and the Radial Plate) have included "it's a work of mechanical art" and another exclaimed "...it's so gorgeous I don't want to mount it outside, I want to hang it on the wall!" Year after year, users are thankful for the amazing ease of the Lift, Slide and Tilt action of this antenna mount for making antenna adjustments simple. Recently, DX Engineering customer Michael, KO4VVH, said "I wondered why this bracket had a cost over $60, but when it arrived today I was blown away. Heavy duty doesn't do this beast justice. Heavy plate stainless steel and it is one of the best mounts I've ever owned. It's big and heavy... Ultra heavy duty. I will mount it up to my Hustler 5BTV HF antenna so I can drop it to ground level for maintenance, adjustments and SWR tweaks. Thank you!" Precision-cut from 3/16 in. 304 stainless steel, these Tilt Base Antenna Mounts are virtually indestructible. They conveniently mount to the same ground pipe or tubing that you use for the antenna and Radial Plate. You could use lag screws or carriage bolts to mount the Tilt Base and the Radial Plate to a wood post, but typically they are securely mounted to a 2 in. max. OD pipe using optional SSVC-2P saddle clamps, displayed in "Required Parts". There are five versions of the DX Engineering Tilt Base Antenna Mounting Systems kit designed for a variety of HF antenna types: DXE-TB-3P: Specifically designed with included stainless steel hardware to mate with the antenna mounting bracket of the Hustler 4, 5 or 6 BTV vertical antennas. DXE-TB-4P: This Tilt Base model provides a mounting plate and clamps for tilting a customer supplied antenna support mast up to 1.75 in. OD and 10 ft. tall, for mounting elevated no-radial vertical antennas that weigh less than or equal to 20 pounds, and have a height of no more than 28 ft. The Vertical antennas and mast assemblies must be adequately guyed. Precautions must be taken when raising or lowering to avoid undue lateral stress on the tilt mechanism. The TB-4P is the tilt option for legacy DX Engineering vertical antenna models DXE-30VE-1, DXE-40-VE-1 and DXE-40VA-1. See the DXE-TB-7P below for the replacement COM-30VA and COM-40VA Monoband Vertical Antennas. DXE-TB-6P: Is specifically designed to mate to the antenna mounting bracket of the Hy-Gain AV-14AVQ (HGN-AV-14AVQ). This special tilt base mounting system includes stainless steel hardware that allows the AV-14AVQ to be closer to ground level for maximum performance. DXE-TB-7P: Is specifically designed to mate to the COMTEK 30 Meter (COM-30VA) and 40 Meter (COM-40VA) Vertical Antennas. DXE-TB-8P: Is specifically designed to mate to the COMTEK 20 Meter Vertical Antennas (COM-20VA) which may be tuned to resonate on one band, 20, 17, 15, 12, or 10 meters. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *U.S. Patent 7,432,875
( 60 )
$83.99
—
$163.98
DX Engineering Ladder Line Surge Protector
Built by popular demand, the DX Engineering Ladder Line Surge Protector is ready to be placed in line with your balanced feedline antenna system! For many years, hams have asked us for a surge protector for use with their 300 ohm and 450 ohm ladder line fed antennas. Decades ago automotive spark plugs or arc gaps were used for shunting lightning pulses from balanced feeders to ground. But, you never really knew if they were going to work, if they really were continuing to work or if they were affecting the tuning. Here is the modern approach to providing surge protection for ladder line fed antennas. Made with components similar to those used in coaxial protectors, the DXE-LLSP uses much larger capacitors, resistors and gas discharge tubes on each leg of the ladder line to offer excellent surge protection capabilities at high SWR. These components are rated to handle 5 kW, so this protector will easily handle well over legal limit RF power at the high standing wave ratios expected on balanced line. Plus, the Ladder Line Surge Protector bleeds off the static charge that is collected on your antenna from wind driven sand, rain and snow! The DXE-LLSP Ladder Line Surge Protector is built to sustain multiple minor surges. As with any surge protector, there is no guarantee that a direct hit from lightning will be stopped. A replacement parts kit is also available to refurbish your pulse damaged protector: DXE-LLSP-RP Features of the DX Engineering Ladder Line Surge Protector: • Standard size NEMA enclosure; 4 x 4 x 2 in. nominal box dimensions; mounting tab holes on centers: 4.625 x 2.125 in. • Works with 450 ohm or 300 ohm Ladder Line and 600 ohm open-wire feeder • Internal Gas Discharge Tubes, Capacitors and Resistors • Can withstand multiple minor surges and shunts them to ground • Bleeds off static charge collected from wind driven snow, rain and sand • Weep holes allow any buildup of internal moisture to drain out • Handles well over legal limit at high SWR as expected on balanced line NOTE: The DXE-LLSP is an RF only device that does not carry DC voltage. Therefore it cannot be tested with a multimeter. It must be tested with an analyzer and a 300 ohm resistor, or by connecting an antenna feedline. If there is infinite SWR or no receive, the components have been damaged by lightning pulse energy and need to be replaced with the DXE-LLSP-RP Ladder Line Surge Protector Replacement Parts Kit. Order the DX Engineering Ladder Line Surge Protector for your balanced feedline antenna system today!
( 19 )
$85.99
Heil Sound's iCM Microphones
Heil iCM microphones are high performance mics specially designed for owners of earlier ICOM transceivers that exhibit low gain in the microphone amplifier stage. Two models are available: the original Silver version and the new Black and Gold version. Not cheap electret microphones, the iCMs utilize a high-quality condenser element with a broad frequency response (35 Hz to 12 kHz) and high output that is crafted for compatibility with the ICOM transceivers. The iCM microphones were designed in close collaboration with ICOM's engineering team and are housed in a beautiful platinum-finish enclosure, making them ideal for hand-held use or for mounting on a boom or desk stand. The iCMs are shipped with microphone clips compatible with Heil Sound base stands and booms. The iCMs are fitted with an 8 ft. length of Heilwire cable terminated in an 8-pin round mic connector that's wired for the ICOM transceivers. A 1/4 in. inline phone jack accepts PTT input from a foot switch or hand switch. A "light touch" PTT switch is mounted on the body of the iCMs. Make your ICOM rig "sing" like never before with Heil iCM microphones.
( 38 )
$149.00
DXPatrol v3.0 GPS Disciplined Oscillators
DXPatrol v3.0 GPS Disciplined Oscillators (GPSDO) deliver laboratory grade frequency precision by disciplining a high quality OCXO with continuous GPS correction. Designed for applications where absolute accuracy and long term stability are essential, this third generation model provides exceptional performance in a compact, easy to deploy package. A GPSDO ensures its output never drifts over time, which is crucial for RF, timing, measurement, and synchronization tasks across both amateur and professional environments. Using a U Blox 7N GPS reference driving a 10MHz CTI OCXO (0.05 ppb* stability), the DXPatrol v3.0 generates up to four programmable independent LVCMOS outputs from 350kHz to 350MHz, giving engineers and radio operators the flexibility to feed multiple devices from a single, ultra stable source. The clear OLED display provides instant visualization of position, satellite lock status, and time information. Multi constellation support—GPS, GLONASS, and Galileo—ensures strong reception and rapid lock in under challenging conditions. For users who need highly accurate system time without relying on the Internet, the DXPatrol GPSDO v3.0 can act as a standalone precision time source. Operators can synchronize a PC directly to the GPSDO, making it ideal for isolated networks, secure installations, DXpeditions, remote stations, and any environment requiring dependable, offline timing for digital modes such as WSJT. Accessing the GPSDO is simple: scan the on screen QR code with a smartphone and instantly connect via Wi Fi to a built in configuration and status webpage. The unit operates from any 6–14VDC supply via a standard 5.5/2.5mm barrel connector, drawing 350mA during initial warm up and stabilizing at approximately 270mA. The DXPatrol GPSDO v3.0 is ideal for amateurs working with weak signal digital modes (FT8, WSPR, JT9), microwave and millimeter wave bands, SDR systems, and beacons, where even small frequency drift can degrade performance. Its stable 10MHz reference ensures precise tuning for high frequency transverters, consistent calibration for test equipment, and reliable synchronization in remote or Internet isolated stations. From EME enthusiasts to portable microwave rovers, the GPSDO v3.0 provides the rock solid frequency foundation advanced operators depend on.
Not Yet Reviewed
$275.99
Comet Mobile Antenna Springs
Comet CA-SPR Mobile Antenna Springs are a must if you are a first responder using one of their Comet CA-2x4SR or CA-2x4SRNMO search and rescue antennas. They are also great for non-emergency off-road use or in areas where a flexible antenna would be a better choice. These spring kits replace the lower antenna rod with a shortened rod and a flexible, durable spring to protect your mobile antenna from the many hazards that would otherwise cause antenna damage. You never know what terrain you'll be traveling next. Get one of these Comet CA-SPR Mobile Antenna Springs, now available from DX Engineering, and give your search and rescue antenna a little more protection!
( 10 )
$29.95
Chelegance Type-N/UHF Coaxial RF Connector Adapters
Chelegance Type-N/UHF Coaxial RF Connector Adapters feature a selection of high-quality Type-N/UHF coaxial adapters useful for changing RF connectors and cable assemblies from Type-N male/female to UHF female SO-239 or male PL-259. Chelegance Type-N/UHF Coaxial RF Connector Adapters are good for keeping on hand in your toolbox. You never know when you will need one, so order a set from DX Engineering today! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. -Includes- 1 - UHF male PL-259 to Type-N, male Straight Adapter 1 - UHF male PL-259 to Type-N, female Straight Adapter 1 - UHF female SO239 to Type-N, male Straight Adapter 1 - UHF female SO239 to Type-N, female Straight Adapter
( 3 )
$21.99
DX Engineering Vertical Antenna Guying Kits
Some vertical antenna manufacturers indicate that their antennas do not need guying. During times of high winds or ice loading, however, some of these vertical antennas may sustain damage or fail altogether. With the small amount of effort needed to install one of these DX Engineering Vertical Antenna Guying Kits, the risk hardly seems worth taking. They feature a 4-point guying scheme that provides the best mechanical advantage to prevent wind stress, regardless of direction. The guying is intended for stability only and should never be depended on for primary support. DX Engineering Vertical Antenna Guying Kits are especially recommended for use with DX Engineering tilt bases, because just one of the guy ropes has to be loosened when you tilt the vertical down. The remaining guys help to stabilize the vertical in three directions when being raised. These kits have been designed to be used with ground-mounted quarter-wavelength vertical antennas, such as DX Engineering monoband and multiband verticals and the Hustler 4, 5, and 6-BTV models. Using the DX Engineering vertical antenna guying kits, you can install four guy ropes approximately halfway up the vertical antenna system to ground level and angled at approximately 45 degrees. Guying should be tightened just enough to permit the antenna to swing a few inches. The ends of the ropes are tied to the earth anchors that are screwed into the ground at about the same angle as the ropes. Tie the other ends of the ropes to the vertical antenna just above one of the antenna element clamps or traps (a guying ring is not required). Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. The DX Engineering Vertical Antenna Guying Kits are available in different lengths to fit your varying vertical antenna needs.
( 9 )
$61.55
—
$126.95
Chelegance JNCRadio All Gender SMA Adapter Kits
Chelegance JNCRadio All Gender SMA Adapter Kits provide useful combinations of four different adapters in each gender version. Choose SMA to either UHF(PL-259 and SO-239), or BNC, or Type-N. Connect any source to your VNA or SDR. Order all three sets to keep on hand, you never know what you will want to connect someday!
( 19 )
$14.99
—
$20.99
Clearance
ICOM ID-52A VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A VHF/UHF Multi-Function D-Star Hand-Held Transceivers allow you to enjoy portable operations like you've never seen before. The large 2.3 in. color display offers more information, an improved interface, and an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750 mW of output so you never miss a contact—and the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. * Key Features: - Integrated GPS - Micro USB port for PC connectivity and battery charging - Micro SD card slot - DR mode for D-STAR operations - Dualwatch with new DV/DV mode - IPX7 submersible rating - Transflective screen layer for improved visibility in direct light - VHF/UHF Airband and FM broadcast receive - Improved heat dissipation efficiency - QSO log in CSV data format - Voice recorder function Larger radio, larger color display, and louder audio. The ID-52A is much more than a replacement to the ID-51A, it's a new way of communicating! An industry-first, a hand-held with a full color waterfall display and the ability to send photos over the D-STAR network. The ID-52A continues to support D-STAR functions with DR mode for easy access to local repeaters based on the internal GPS information, as well as Terminal and Access Point modes. Additionally, the radio weighs a mere 10.4 oz. (295g) and has an 80 percent increase in overall volume to hear in loud conditions. Receive Modes - Dualwatch allows for the monitoring of two frequencies or bands simultaneously. VHF/VHF, UHF/UHF and VHF/UHF monitoring are all supported along with the new ability to decode two DV signals simultaneously. Quickly call from either the main or sub bands on the fly. Enhanced UHF capabilities allow for monitoring of Military Air Bands from 225 to 374.995 MHz, and the wideband receiver allows for listening to nearby broadcast FM stations. Bluetooth Enabled Features - The ID-52A incorporates common Bluetooth profiles for audio and data controls, which provide new mobility in the palm of your hand. Icom leads the way by pairing either Icom or third-party headsets for voice communications. The optional VS-3 Bluetooth® headset with the large PTT button allows for hands-free operation. Additionally, users can program 3 buttons to improve operability and mobility. Download the RS-MS1A Remote Control Software on Google Play to change operating frequencies, send texts, and more! Integrated GPS/GLONASS Receiver - With a GPS lock, use the D-PRS mode to send location data, as well as show received station location, distance, and direction. The ID-52A also displays current Grid Square information. This GPS position data can be used for the Position Auto Reply, Near Repeater Search and GPS log functions. Icom ID-52A Specifications (partial, subject to change): * Output Power: 5W / 2.5W / 1.0W / 0.5W / 0.1W * Wideband Receiver Frequencies: 88 – 174 MHz, 225 – 479 MHz * TX Frequencies: 144-148, 440-450 MHz * Channels: 1000 * Bluetooth: Built-in * GPS: Built-in * Waterproof Rating: IPX7
( 26 )
$649.95
$589.95
DX Engineering Phillystran Steel Tail Kits
DX Engineering Phillystran Steel Tail Kits provide the appropriate transition from non-metallic to metallic guying cable at the ground end of tower guying systems. Steel Tail Kits are available for Phillystran HPTG-4000I, -6700I and 11200I Guy Lines. What is the function of the steel tail? Here is the recommendation by Phillystran, the manufacturer of HPTG-I High Performance Tower Guy non-metallic guy lines: A steel tail is a length of EHS (Extra High Strength) steel guy line connecting the HPTG-I assemblies to the turnbuckle or guy anchor. The steel tail protects the HPTG-I assemblies from damage due to brush fires, lawn maintenance equipment or vandals. The steel tail length should be sufficient to get the bottom end of the HPTG-I assembly above arm's reach, or above brush tops (if located in a marsh or tall brush area). The HPTG-I should never pass through tree limbs or be allowed to rub against poles or trees. The steel tail allows for easier guy length calculations and serves as a guy tension monitoring point, as well as a safer area to attach guy grips during guy line installation and tensioning. Eliminating the hassle of buying a length of steel cable and obtaining a special tool to cut it, DX Engineering Phillystran Steel Tail Kits provide everything needed to isolate your tower's non-metallic guy cable from harm. Three different size kits are available for different tower guying requirements provided by Phillystran guy cables 4000I, 6700I and 11200I. Here are the items included in these innovative Steel Tail kits: - 12 ft. EHS steel guy line, Galvanized, in three kit sizes, 3/16 in., 1/4 in. or 5/16 in. - Porcelain Guy Line Strain Insulator, 502 or 504 depending upon kit size - Galvanized Steel Preform Dead End Big-Grips for EHS steel guy line, two per line - Heavy Duty Thimble, galvanized steel, appropriately sized for each kit - Cable Ties, UV protected Black, four, to secure installed Big-Grip ends Note: Phillystran guy line and Preform Dead End Big-Grips for Phillystran are not provided in this kit and must be ordered separately. DX Engineering Phillystran Steel Tail Kits provide Porcelain Guy Line Strain Insulators for the top end of the Steel Tail so that the galvanized steel Big-Grips for the Phillystran and for the EHS Steel Guy Lines do not touching and make RF noise. For three different size Phillystran guy line, HPTG-4000I, -6700I and -11200I, these kits are available exclusively from DX Engineering in 3-packs for each level of tower guying.
( 2 )
$79.99
—
$239.99
InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas
InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are an exciting development for the fascinating hobby of long distance (DX) reception of free, over-the-air broadcast FM radio. The OP-DES Yagi directional antennas are specially designed for better gain, great front-to-back and patterns with fewer side lobes, to dramatically improve your reception experience by helping your tuner or receiver achieve a new level of performance. For FM DX enthusiasts who own great FM Tuners and Receivers, pulling in new distant stations at full quieting is thrilling. Capturing a weak station while rejecting an on-channel stronger station can be especially gratifying. Hearing distant fringe and local stations at full fidelity without noise is the ultimate goal for FM audiophiles as well as FM DXers. Even HD Radio enthusiasts can increase their channel count with full sound quality and fewer dropouts. One of the distinctive design features of the OP-DES Yagi Antennas is a low feedpoint impedance that allows either 50 ohm or 75 ohm coaxial cable to be connected directly to the driven element, eliminating the losses of a transformer balun. With several boom lengths available, for the FM enthusiast on a budget, for the casual listener with a treasured vintage receiver, and for the most discerning FM Tuner audiophile, best-ever reception is possible with an InnovAntenna FM Broadcast OP-DES Yagi. InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are available as: IVA-18484-0108 Compact and Space-Saving 8 element, 6.5 ft. boom, 9 to 10 dBi gain, typ. 24 dB f/b IVA-18484-0145 Cost-Effective Performance 11 element 12 ft. boom, 9.8 to 12.6 dBi gain, typ. 25 dB f/b IVA-18484-0110 High Performance 14 element, 18 ft. trussed boom, 10-13 dBi gain, 20 to 42 dB f/b IVA-18484-0112 Ultimate Performance 18-element, 24 ft. trussed boom, 11-14 dBi gain, 20 to 44 dB f/b Choose the InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antenna that is right for you. Immerse yourself in a world of music, news and entertainment and discover a clarity and fidelity that you never heard before on your FM Tuner or Stereo Receiver.
( 2 )
$299.99
—
$735.99
Yaesu Handheld Battery Cases
So the HT battery pack has bitten the dust, but you need to use that radio! Good thing you purchased one of these genuine Yaesu Handheld Battery Cases. Pop in your favorite type of AA cells and get back on the air! Buy almost anywhere in a pinch or stock up and use long shelf-life alkaline batteries in these holders for short term operations until you can recharge your HT battery pack. For some models, a set of AA rechargeable cells fresh from their separate charger may be used in a battery case. Rechargeable cells should only be used to run an HT in an emergency. Note: Never recharge rechargeable cells while in battery case. Some model HTs may not operate on the lower voltage provided by rechargeable cells. Consult your Handheld Transceiver manual. Yaesu Handheld Battery Cases from DX Engineering keep you and your HT ready for anything!
( 16 )
$24.99
—
$59.99
InnovAntennas DXR Series Multi-Band HF Beams
InnovAntennas DXR Series Multi-Band HF Beams have short booms with full-size elements or capacity-loaded shortened elements, all with excellent performance, making them very popular internationally. The DXR Series interlaced-element antennas, optimized by G0KSC over a long period of time, achieve the best possible balance between compact size and performance. For the DXR Series Multi-band Yagis, equal attention was paid to a very solid construction and sufficiently small component and packaging size, to keep shipping costs within reasonable limits. Click on any model listed for specific details and specifications. InnovAntennas DXR Series Multi-Band HF Beams are available exclusively from DX Engineering in North America. Important features of InnovAntennas DXR Series Multi-Band HF Beams: * No traps, matching links, or hairpins * Only one feed line for all bands * Careful selection of materials without regard to cost * Very robust construction with still manageable package size The DXR Series beams use a 1.97 x 1.97 in. (50 x 50 mm) square boom with 0.078 in. (2 mm) wall thickness. A square boom has the advantage that the elements cannot twist in the plane. On the other hand, it is slightly heavier than a round boom of the same stiffness. The DXR Yagis do not require any bracing of the boom. The longest elements are 1.378 in. (35 mm) diameter in the middle and taper relatively quickly to achieve a good compromise between weight and strength. This construction also helps to avoid constant vibration even in light winds. With these multi-band Yagis, care has been taken to ensure that there are never more than the elements of three bands nested within each other. This is because each additional element for one band can cause interference on another band. This negative effect was avoided by careful manual optimization. The result is the best possible matching over a wider band range than other antenna designs. In most cases, no tuner is necessary; the SWR minimum can be precisely set by adjusting the element lengths. Due to the robust construction and the absence of moving or electrically active components such as coils, traps, hairpins, etc., an InnovAntennas DXR beam is maintenance-free for many years. The insulators are UV-resistant and designed for a wide temperature range. The mounting hardware uses sea-water resistant stainless steel and the aluminum is type T6 6066/6082, which is also used in aviation. It is nice not to have to climb the mast every year to maintain the antenna. The DXR Series Multiband beams are designed to require only one feed line. This makes installation on a mast with a rotor very easy. And the use of modern SDR transceivers, which allow the observation of several bands at the same time, becomes really useful. The one feed line is connected directly to the solid distribution rails of the fed elements. By avoiding baluns, matching elements, traps, or hairpins for tuning, transmit power is only limited by the coaxial cable and connectors. Note: Front-to-back ratio (F/B) and SWR bandwidth data for the DXR Series will be added as it becomes available. Many models of the DXR Series are available as a "super-compact" version, on which the longest elements have been shortened with capacity hats, thus reducing their turning radius considerably. The installation of these impressive antennas is possible even where space is limited.
( 4 )
$1,439.99
—
$2,097.99
DX Engineering TWIG QRP 9:1 UNUNs
The DXE-TWIG-9-1 QRP UNUN (Unbalanced-to-Unbalanced transformer) matches a high-impedance, non-resonant end-fed/random wire antenna (33 to 84 feet long) to the 50-ohm unbalanced load required by amateur radio transceivers. The DXE TWIG-9-1 covers 1.8–30 MHz and is ideal for portable (QRP) or HOA-restricted antennas. The connector on the DXE-TWIG-9-1 is a BNC female to mate with the recommended 35 to 50 feet of coax cable, which is used as the counterpoise. In some cases, an external wide range tuner may be needed. This UNUN may not provide a perfect 1:1 SWR on all bands without an additional tuner and may experience heating at higher power due to impedance mismatches. Typically, 9:1 UNUNs are used for: • Random Wire Antenna: Long wires of specific non-resonant lengths (e.g., 29, 35.5, 41, or 71 feet) designed to avoid an electrical half-wave, or multiple of a half-wave, on any amateur band. • End-Fed Long Wire: General-purpose long wire used for wideband receiving or multiband transmitting where an antenna tuner is available. • Inverted "L" or Sloper Configuration: When these are fed as non-resonant wires rather than resonant half-wave radiators. Tips on How to Use the 9:1 QRP UNUN as a Random Wire Antenna 1. Select a "Random" Length: Do not use resonant half-wave lengths. Popular lengths that avoid resonance on amateur bands include e.g., 29, 35.5, 41, or 71 feet. 2. Connect the Antenna Wire: Attach your long wire to the element wire terminal of the UNUN. 3. Use an Antenna Tuner: Because a random wire is never perfectly resonant, you may have to use an internal or external antenna tuner to achieve a low SWR for your transceiver. 4. Placement: Mount the UNUN near the ground or on a short support and run the element wire as high and clear of obstacles as possible. The antenna shown in this manual was tested using the optional 24 or 26 AWG wire such as CEW-VIZ24-YEL100 stranded copper, PVC insulated, high visibility yellow antenna wire. The coax cable (with BNC connectors) is recommended to be 35 to 50 feet in length since the coaxial cable shield is used as the counterpoise. The antenna can be installed in different configurations. Wire lengths will vary depending on the installation and antenna design chosen. This is a low power (QRP) antenna system impedance matching UNUN which handles 25 Watts on SSB, 10 Watts on CW and 5 Watts on digital mode when the antenna SWR is less than 2:1 without the use of an antenna tuner.
Not Yet Reviewed
$49.99
Summit Racing™ Roll-Up Tool Bags
Never travel without tools. Summit Racing™ roll-up tool pouches are handy, durable, and nice looking must-have accessories that easily go with you wherever it is the road takes you. The hard-wearing nylon constructed pouches unroll to reveal four large and two smaller zip pockets to contain tools and items necessary for your journey. On the outside, the bags roll and secure with adjustable latches creating a compact, snug pack that will fit most anywhere in your vehicle or on your off-road machine. The roll-up tool pouches feature the Summit Racing Equipment® logo.
Not Yet Reviewed
$41.99
Milwaukee M18 ROCKET Dual Power Tower Lights
Milwaukee M18 ROCKET dual power tower lights provide 25 percent more light and all day operation on the job site with 2,500 lumens of TRUEVIEW High Definition Output. The LED light towers have dual power capability and can be powered by Milwaukee's M18 batteries or by an extension cord. The tower light head can extend from 4 to 7 feet to light overhead work or minimize shadows when casting light downward. The LED light tower is capable of filling large areas with light and provides 2,500 lumens of TRUEVIEW High Definition Output in high mode, 1,100 in medium, and 700 in low. When combined with the M18 REDLITHIUM XC 5.0 battery pack, they can run for up to 13 hours. Milwaukee's TRUEVIEW High Definition Output provides neutral white color and a high color rendering index with a reflector that produces an even beam pattern. The portable light towers reinforced legs are impact-resistant, and a low center of gravity provides a stable base. The LED light head is protected by an impact-resistant lens and bezel, nested in a protective shroud for secure transport and storage. High-quality LEDs never need to be replaced and are backed by Milwaukee's limited lifetime warranty. The combination of these technologies offers professionals the highest quality LED lighting solutions, both on and off the jobsite. Key features: * Dual Power: powered by M18 REDLITHIUM battery or extension cord * 2,500 Lumens of TRUEVIEW High Definition Output * TRUEVIEW High Definition Output provides neutral white color and produces an even beam pattern for clearer visibility * Supply both task and area lighting as well as provide light overhead to reduce shadows in the workspace * M18 ROCKET tower lights deploy in seconds (5 second setup, 7 foot extension) * Built to adapt to any job site environment * Impact-resistant, reinforced legs * 3 output modes for optimal brightness and run-time * Powered by M18 REDLITHIUM battery or extension cord * Protective guard to secure head and lens during transport and storage * Compact footprint, low center of gravity * Low battery indicator * LED limited lifetime warranty by Milwaukee—the LEDs never need to be replaced
Not Yet Reviewed
$249.99
Moonraker Whizz Whips
With Moonraker Whizz Whips you may operate your QRP HF/VHF/UHF portable transceiver across the spectrum! Whizz Whips are completely self-contained, all-band 51-inch telescoping whip antennas with an integrated tuner. They are super-convenient antennas for receiving and transmitting that mount right to your radio. These adjustable telescopic whips free your rig from coax cables, mounts, tripods, masts and trees, and give you remarkable performance from desktop to picnic table, with no ground required. Now that's portable! Imagine - finally you can take your go-anywhere rig anywhere you want to go! Whizz Whips enable you to transmit from 3.5 to 450 MHz. On HF, the integrated tuner will generally provide an excellent match (better than 2:1) and permit loading the antenna perfectly. You may operate the Whizz Whip in different phased modes on VHF and UHF, such as 1/4 wave, 5/8, 3/4 or even 1-1/4 wavelengths, depending on frequency. This makes the Whizz Whip the only HF portable antenna that not only operates VHF and UHF, but does it with gain! Some Whizz Whip details: * Loading: Base, multi-tap * RX coverage: 0.6 to 500 MHz * TX Coverage: 3.5 to 460 MHz * Power Handling: 10 watts; all modes * Antenna Length: 130cm / 51.2 in. * RF Connector on integrated tuner box: UHF male / PL-259 With the same antenna, you can work a SSB or CW station overseas on 10, 15 or 20, check in to the local forty-meter swap net, use two meters or 440 for a chat on the local repeater, catch the last of the game on MW broadcast, and wrap up the evening with the BBC World News - all with the same, super-portable antenna. With its shirt-pocket size and incredible convenience, you'll never be without an antenna again. Go portable! Get out there! Try one of these Moonraker Whizz Whips.
( 4 )
$209.99