Availability
23 Results Found For "104"
Chelegance M-104 HF 4-Band Mobile Antennas
Chelegance M-104 HF 4-Band Mobile Antennas are an excellent choice for mobile HF operations, including popular activities like POTA and SOTA. This compact and lightweight antenna kit is designed for easy setup and delivers great performance across the 40-10 meter bands. With the included 3/8-24in. threaded hex nut, the M-104 can also be used on the 2m/70cm bands. Assembly is easy, simply install one of the included coils for your desired band, then adjust the telescopic whip for optimal SWR. The M-104 provides exceptional reliability thanks to its robust construction and high-quality materials, ensuring durability in various outdoor weather conditions. Additionally, its portable design makes it easy to carry and deploy.
Not Yet Reviewed
$133.99
DX Engineering 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies
What if two RF devices – the radio, switch, meter, lightning protector, choke, balun or the antenna – have opposite female connectors, one type-N and the other SO-239? This dilemma is solved with the uniquely helpful DX Engineering 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies, the perfect alternative to questionable straight adapters. Made for any job (HF, VHF and UHF) and especially for outdoors, one top-quality silver plated Type-N male connector and one patented* Next Generation PL-259 (UHF male) connector terminates our premium, low-loss 400MAX coaxial cable to create these very useful Adapter Cable Assemblies. DX Engineering 400MAX coax features a waterproof jacket made with a highly UV-resistant, Type III-A polyethylene which is ideal for all outdoor feedline applications, including direct-bury installations. With a large 10 AWG stranded copper center conductor, 400MAX NX Series low-loss assemblies are perfectly suited for short or long cable runs and low or high-power level operations. Our 400MAX coaxial cable also features modern, gas-injected foam polyethylene dielectric that cannot absorb moisture and has complete shielding with 100 percent coverage bonded aluminum tape covered by minimum 95-percent coverage tinned copper braid. Regarded in the industry as a top quality low-loss feedline, DX Engineering 400MAX Coaxial Cable is custom made to provide the highest performance and excellent longevity. Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. Note: DXE-400MAX is not recommended for use in repeater applications, VHF/UHF duplex, or for a beam antenna rotator loop. DX Engineering 400MAX PL-259 NX Series Coaxial Adapter Cable Assemblies are terminated at one end with the N-Type male connector and the other end with our custom-designed DX Engineering PL-259 (UHF male) connector. Both silver plated connectors feature machine-crimped shields with 360 degrees of complete mechanical and electrical contact for maximum reliability. PL-259 center pins are hand-soldered, and Type-N center pins are machine-crimped by trained assembly techs to assure a proper connection. Next Generation PL-259 connectors feature: * Full diameter, full-length soldered center pins that snugly fit even worn SO-239s * Spacious center pin inside diameter that accepts large conductors and allows generous solder flow * Deep, double-knurled threaded shells for secure finger tightening These high-quality PL-259s have all silver-plated brass shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. Every assembly is continuity and Hi-Pot tested and then heat-shrink weather-sealed for the ultimate service longevity. You won't find this level of cable assembly quality anywhere else! 400MAX Type-N to PL-259 Low-Loss 50-ohm Coaxial Adapter Cable Assemblies are available in selected lengths and at any length in the Custom Cable Builder, only from DX Engineering! *U.S. Patent D745849
( 8 )
$281.70
AirBedz Original Truck Bed Air Mattresses
AirBedz Original Truck Bed Air Mattresses offer extreme comfort for extreme people. Outdoor enthusiasts and portable station operators will love the rugged durability, ease of use, and, most especially--the comfort! AirBedz original truck bed air mattresses are crafted from heavy-duty cloth construction with superior puncture resistance and are designed to go around and over your truck bed wheel wells. Plus, they feature an integrated air coiled system that evenly distributes weight across the thick mattresses. That means more room, for a more restful sleep! Available in sizes to fit midsize and full size trucks with long or short beds, these original mattresses include a built-in, rechargeable pump that inflates and deflates the mattress with the flip of a switch. Are you planning a quick SOTA activation? What about Field Day? If you are taking QRP equipment into the field you need to consider your own comfort. Do you need someplace comfy and quiet for a quick nap? Playing--and resting--in the field just got better, thanks to AirBedz Original Truck Bed Air Mattresses!
Not Yet Reviewed
$299.99
La Crosse Technology Indoor/Outdoor Thermometers
La Crosse Technology Indoor/Outdoor Thermometers are available in a wide range of sizes, colors, and capabilities. Choose them for their temperature functions, humidity, solar power, clock, or daily minimum and maximum recorded values. Wireless outdoor sensors provide the ultimate in installation convenience! You may choose a unit with a monochrome or color display to track your indoor and outdoor comfort levels. Whatever your desire for home-based comfort data may be, La Crosse Technology Indoor/Outdoor Thermometers from DX Engineering can help you decide what to wear!
( 3 )
$5.99
—
$19.99
La Crosse Technology Outdoor Thermometers
La Crosse Technology Outdoor Thermometers are available in a wide range of sizes, colors, and capabilities. Choose them for their temperature functions, clock, Solar Power, convenience, or daily minimum and maximum recorded values. Whether you choose window units or garden types with their own support poles, whatever your desire for outdoor comfort data may be, La Crosse Technology Outdoor Thermometers from DX Engineering will supply you with the information!
( 2 )
$11.99
LDG Electronics Antenna Tuner Radio Interface Cables
LDG Electronics Antenna Tuner Radio Interface Cables can make life in the ham shack so much easier! With these cables linking your radio and antenna tuner, you can be sure to have the absolute best antenna match, regardless of frequency changes, for all of the bands that they cover. All that's necessary is to pair your radio to your LDG Tuner and link them with the appropriate cable. Available cables can link particular Alinco, ICOM, Kenwood and Yaesu radios directly to specific LDG tuners. We have kept the hamfest and flea market folks in mind by listing some LDG tuners that are no longer in production. You may be pleasantly surprised to find that the bargain hamfest antenna tuner you picked up has an available cable to interface to your base or mobile rig! We've done a lot of the homework for you, but please remember that we are not the last word on radio/antenna tuner combinations. There are possibly some pairings that we have missed. That said, these cables offer you the ability to interface your radios and antenna tuners for maximum convenience in achieving full transmitted signal. As the ultimate matchmaker, you'll fall in love with these LDG Electronics Antenna Tuner Radio Interface Cables! Get yours today!
( 140 )
$14.95
PanaVise InDash Custom Dash Mounts
PanaVise InDash Custom Dash Mounts from DX Engineering are vehicle-specific and are carefully engineered in the PanaVise factory in Reno, Nevada. Ergonomically designed, PanaVise InDash mounts will not interfere with gauges or air bag deployment. Specialized mounts are available for passenger vehicles, SUVs, pickup trucks, crossovers, vans, light and medium-duty trucks, and semis. PanaVise InDash-Custom Dash Mounts are an excellent choice for a wide variety of mobile electronics, including amateur radio equipment, satellite radios, GPS units, mobile video screens, cell phones, and so forth. A full range of mounting accessories is available for the perfect installation of any electronic devices with AMPS-compatible mounting patterns! PanaVise provides a wide range of specialty plates and adapters to make every PanaVise InDash installation the perfect mounting choice. Whether you need a surface moved slightly to the right or left, up or down, or just want a little more adjustability, their extensive equipment selection will satisfy the most demanding customer. Made from high-grade steel for maximum strength and then powdercoated for scratch and corrosion resistance, every PanaVise InDash vehicle mounting solution comes complete with installation instructions. A quality screw and hardware kit is included (if required) with every mount. For custom mounting solutions where you must match the make and model of the vehicle very carefully, Shop DX Engineering today for PanaVise InDash-Custom Dash Mounts!
( 7 )
$38.49
Heil Sound Replacement Parts
Heil Sound Replacement Parts are available here to help repair or restore your Heil Sound product and make it like new again. Or you may choose to build a custom assembly. Many of these parts may be used for your own microphone or headset project. Choose from cable mount XLR and Foster microphone connectors, ear pads, large and small windscreens, headset cords, mic switches, shock mount bands and other parts available for current and legacy models. However, please note that not all parts for all models are available, so if you don't see it here, chances are, it cannot be ordered. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 99 )
$69.00
Chelegance BT60 Mobile Antenna Mounts
Chelegance BT60 Mobile Antenna Mounts are stainless steel vehicle mobile antenna mounts that give you the flexibility needed for your desired antenna mounting location, including trunk lid, hatchback, hood, and more. The BT60 antenna mount features a silicone pad designed to prevent scratching the vehicles paint when installed.
Not Yet Reviewed
$36.99
ACOM 1200S Solid State HF + 6 Meter Amplifiers
ACOM 1200S Solid State HF + 6 Meter Amplifiers cover the amateur bands from 1.8 through 54MHz. They provide 1000W output power (PEP or continuous carrier) with less than 50W of drive on 240VAC (max. 500W out on 25W RF input on 120VAC). All operational conditions are visible on a multi-function high-resolution color display. Note: To install your own power plug, order AOM-1200S (you remove the European plug) For a 120 Volt plug (NEMA 5-15P), order AOM-1200S-120 (500 watts) For a 240 Volt plug (NEMA 6-15P), order AOM-1200S-240 (1,000 watts) All part numbers include a power cable. Features include: * Five-inch (5 in.) (108x65mm) high resolution color display, 800x480 pixels and 24-bit color * Final stage uses rugged LDMOS transistor - BLF188XR or equivalent. * Compatible with all transceiver models available on the market - does not need any special signals: "ground on transmit" (PTT out) and typically less than 50W of RF drive power is sufficient for full power on 240VAC; a maximum of 25W input on 120VAC. * Broadband input circuit provides a perfect transceiver load with SWR below 1.2:1 (typically 1.1:1), with no amplifier tuning, throughout the frequency range 1.8 to 54MHz * The overall operation of ACOM 1200S is extremely simplified: the screen menus are intuitive and easy to follow * Optional automatic control – when connected to a transceiver with a CAT interface, the amplifier monitors constantly, follows the operating frequency, and changes the bands accordingly * If NOT CONNECTED with CAT interface, the amplifier monitors the RF input with a built-in frequency counter and automatically switches bands * Remotely controlled by RS232 interface * Protects itself during operation due to continuous protection circuits in all modes * The user can monitor more than 10 parameters * Easy maintenance – detailed data (55 parameters) about each of the last 28 protection trips is stored in the amplifier's nonvolatile memory * Convenient field operation: extremely compact and lightweight construction, extended mains voltage range (93V to 265V), limited inrush current and Power Factor Correction (PFC) – all significant parameters in operation from unstable mains, generators etc. features achieved thanks to the built-in switching mode power supply (SMPS) a) Rated output power: 1000W plus/minus 0.5dB, PEP or continuous carrier (1200W PEP max.). b) Intermodulation distortions (IMD3): better than 30dB below the rated PEP output. c) Harmonic and parasitic emissions output suppression: better than 60dB (65dB typically). d) Input and output impedances: nominal value: 50 Ohm unbalanced, UHF (SO-239) type connectors; * Input circuit: broadband, SWR below 1.2:1 (1.1:1 typically); 1.8 – 54 MHz continuous range without retuning or switching * Admissible SWR at the output load (the antenna): up to 3:1 with proportional power reduction and up to 1.5:1 for full output power e) RF power gain: 13dB plus minus 1dB f) Automatic AC voltage Input Handling: 93 to 265VAC (no internal wiring change needed) g) AC Input power consumption at full output power: 2000 VA or less with a power factor of 0.95 or higher h) AC mains power consumption in Low Energy (waiting) mode: less than 1VA i) Complies with EU safety regulations and electromagnetic compatibility standards, as well as with the US Federal Communications Commission (FCC) rules j) Environmental * Temperature range: -10 C to +40 C (14 F to 104 F) * Relative air humidity: up to 95 percent at 35 C (95 F) k) Dimensions and weight: (D x W x H) 418 x 372 x 162 mm (16.46 x 14.65 x 6.38 In); 14.5 kg (31.97 lbs.) Supplied with: - A power cord - A manual with a CE declaration of compliance; - Two 10A fuses for operation on 200-240VAC or 100-120VAC mains. These amplifiers offer fully automatic operation and superior solid state performance. To upgrade your station, order ACOM 1200S Solid State HF + 6 Meter Amplifiers from DX Engineering.
( 29 )
$4,750.99
ACOM 700S Solid State 1.8-54 MHz Linear Amplifiers
ACOM 700S Solid State 1.8-54 MHz Linear Amplifiers are state-of-the art amplifiers that cover all amateur bands from 160 through 6 Meters. These amps provide 700 W output power (PEP SSB or CW modes). Working parameters of the amplifier are indicated on a multi-function, high-resolution 5 inch color display. Amplifier control is accomplished with only six buttons on the front panel or directly by CAT interface from the transceiver or remotely by RS232 interface. ACOM 700S amplifiers are compatible with all transceiver models available on the market. The broadband input matches to the transceiver with low SWR over the entire range of 1.8-54 MHz. Full output operation only requires a maximum of 40 watts drive and the typical "ground on transmit" (PTT) keying with no special signals required. The overall operation of ACOM 700S amplifiers is extremely simplified. Screen menus are intuitive and easy to follow and no special skill is required from the operator when changing frequency bands. The amplifier monitors the frequency of the input signal through the built-in frequency counter and automatically switches bands. A band data or CAT interface connection from the transceiver is NOT required for automatic band changing. These amplifiers take care of themselves during operation, due to the continuously-working protection circuits in all modes. The operator can digitally monitor more than 10 parameters concerning the working conditions of the amplifier. Detailed data (55 parameters) about each of the last 28 hard-fault protection trips is stored in the amplifier's nonvolatile memory. ACOM 700S amplifiers are perfect for DXpeditions and field operation. They are extremely compact and employ light-weight construction thanks to the built-in switching-mode power supply. They operate on an extended mains voltage range** (100-120VAC and 200-240VAC) by changing only the main fuses - no internal switching is required. Please read the SPECIAL NOTE at the end of the specifications. ACOM 700S Solid State HF/6-Meter Amplifiers are among the finest and most modern linear amplifiers available anywhere in the world. These outstanding amplifiers are available from DX Engineering! ACOM 700S Solid State Linear Amplifier Specifications: * Rated output power: 700W PEP SSB or CW * Intermodulation distortion (IMD3): Better than 31dB below rated PEP output * Harmonic and parasitic emissions suppression: Better than 60dB (65dB typical) * Input and output impedances: SO-239 UHF female connectors; 50 ohm unbalanced output; * Input circuit: broadband, SWR below 1.2:1, 1.8 to 54 MHz continuous without retuning or switching * RF power gain: 14dB +/- 1dB * Complies with US Federal Communications Commission (FCC) rules and the EU safety regulations and electromagnetic compatibility standards * Temperature range: 14 degrees F to 104 F (-10 C to +40 C) * Relative humidity: up to 95 percent at 95 F (35 C) * Dimensions (WHD): 12.8 x 5.6 x 14.2 in. (326 x 143x 365 mm) * Weight: 26 lbs. (11.8 kg) **Mains supply voltage: 100-240V, 50-60 Hz, single phase, automatic switching supply; no internal change required for either mains voltage; European style 5x20mm fuses rated for 250VAC for correspond mains: 10A fuses for operation from 200-240VAC, 16À fuses for operation from 100-120VAC. SPECIAL NOTE: Due to power efficiency the use of 240 Vac service is highly recommended. -AOM-700S-240 is pre-wired with NEMA 6-15P USA plug for 240 volt operation. - AOM-700S-120 is pre-wired with NEMA 5-15P for 120 volt operation. - AOM-700S has NO PLUG; order this model to wire your own AC plug for either voltage. * AC load: 1,350VA or less with a power factor of 0.95 or higher * AC load in Low Energy (standby) mode: less than 1VA For additional information, please check the "Documentation" tab.
( 35 )
$4,367.99
DX Engineering Mobile Whip Antennas
DX Engineering Mobile Whip Antennas are the classic 102 in. whip made from the finest heat treated 17-7 PH tapered stainless steel, which resists bending and kinking. 17-7 PH is a precipitation-hardening stainless steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, and minimum distortion upon heat treatment. These stainless steel whip antennas are tough. Dissipation tips reduce unwanted static buildup and they fit all 3/8-24 in. threaded mounts. The WP-102 is the standard 102 in. whip, shipped in a 104 in. tube. They resist bending and kinking and are ideal for mobile and portable operations and for Active Receive Antenna Systems. They are also great for use with mobile antenna tuners. No matter what your HF whip antenna application may be, get your stainless steel Mobile Whip Antennas from DX Engineering!
( 19 )
$49.99
On Sale
Alinco DR-06TA 6 Meter FM Mobile Transceivers
Alinco DR-06TA 6-Meter FM Mobile Transceivers are capable, compact 6-Meter, 50 watt FM rigs. With the DR-06TA you will discover excitement working worldwide "Magic Band" communications! Working DX is possible over thousands of miles when taking advantage of unique propagation such as Sporadic-E, F2 reflection and meteor scatter, just to name a few. Of course even without favorable propagation conditions, 6 meter repeaters will keep you communicating with friends as well. When the Magic Band opens, the world is within your reach with just a few watts. Be part of the fun! These compact, affordable, easy-to-use mono-band rigs will make your QSOs more enjoyable at home or on the road, so take a closer look at 6m FM and Alinco! Features of Alinco DR-06TA 6-Meter FM Mobiles: * 100 alpha-numeric memory channels * CTCSS, DCS encode plus decode, DTMF encode and Tone-burst are all standard * Ten autodial memories * Clean, clear Alinco audio * Super-wide 7 character alphanumeric display * Wide and narrow FM modes * Theft alarm feature * A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more! * Stays in mode you select (even voice/packet) through power-off cycles * Revised NEW manufacturing to be compliant to RoHS/lead-free order in the EU. Specifications: * Frequency range: TX: 50 to 53.995 MHz RX: 40 to 69.995 MHz * Operating modes: FM=16K0F3E * Channel steps: 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 kHz * Memory: 100 channels plus 1 quick recall * Antenna impedance: 50-ohm unbalanced (SO-239) * Frequency stability: Plus/minus 7 ppm * Power supply: 13.8V Nominal, 11.7 to 15.8 volts * Current drain: TX High 11.0 amps, RX 0.6 amps maximum * Usable temperature range 14 degrees F to 140 F (-10 degrees C to 60 degrees C) * Dimensions (WHD, w/out projections): 5.59 in. x 1.57 in. x 6.85 in. (142 mm x 40 mm x 174 mm) * Weight: 35.3 oz. (approx. 1 kg) * CTCSS tone encoder/decoder: 39 tones * Digital Coded Squelch encoder/decoder: 104 codes Transmitter: * Output power: Approximately 50W (HI) 20W (MID) Approx. 5W (LOW) * Modulation system: Variable reactance frequency modulation * Spurious emission: Less than -60 dB * Maximum frequency deviation: (FM) plus/minus 5 kHz / (NFM) plus/minus 2.5 kHz Receiver: * Receive system Double-conversion Super-heterodyne * Sensitivity (-12dB SINAD) Less than -12.0dBu * Intermediate frequency 1st IF 10.7 MHz, 2nd IF 450 kHz * Selectivity: (FM) -6dB plus/minus 12 kHz or more, -60dB plus/minus 28 kHz or less, (NFM) -6dB plus/minus 6 kHz or more, -60dB: plus/minus 16 kHz or less * Audio output power More than 2 W (8-ohms at 10 percent THD) Note: For additional information, please look at the files under the "Documentation" tab. Included accessories: * Instruction manual * EMS-57 DTMF Microphone * Mounting Bracket w/screw kit * DC Power Cable (ADUA38) * Mobile microphone holder * Alarm Cable Optional Accessories: * Microphones EMS-53 non-keypad microphone * ADUA38 - Spare DC Power Cable * ADFM78 – Spare Mounting Bracket * DM330MVT - DC Power Supply, 120 VAC In, 13.8 VDC Out at 30A, switching * EJ-41U internal TNC board is available as an option for 1200/9600bps packet; no need to remove mic for packet operation Operating 6-meter mobile can be a great way to pass travel time. After all, it's the Magic Band! Whether it's FM Sporadic-E DX or local repeaters, one of these Alinco DR-06TA 6-Meter FM Mobile Transceivers, from DX Engineering, offers some real mobile fun!
( 3 )
$255.95
$249.95
Toptek Communications Power Amplifier Remote Control Panel
Toptek Communications Power Amplifier Remote Control Panel is designed specifically for the PA-350V 144 MHz the PA-150U 430 MHz Amplifiers. This user interface duplicates the LCD display and push-button keypad operation of the front panel of the connected amplifier. The easy-to-read green backlit Alphanumeric LCD displays simultaneous digital input power, output power and SWR readings. Both the Amplifier front panel and the Remote Control Panel are connected in parallel, so both display identical information, and the operator may control, select functions, and monitor the amplifier with either panel simultaneously. Push-button functional selections and specialized, user-defined functions and menu selections are all remotely displayed, including incremental power output settings. Hot swapping is supported; whether the amplifier is powered on or off, the Remote Control Panel may be plugged in or unplugged any time. The bottom of the Remote Control panel features a 3.5mm female external PTT jack to support SSB, CW and Digital operations. The Remote and the Amplifier each have a 4-pin mini-DIN jack, and the included 16.4 ft. (5m) 4-pin mini-DIN cable connects the amplifier and powers the Remote. Toptek Communications Power Amplifier Remote Control Panel is easy to locate on the desk or in the vehicle. The Remote dimensions are (WHD) 4.507 in. x 4.094 x 1.300 in. (117 x 104 x 33 mm) and it weighs 6 oz. (170 g). Applicable model VHF and UHF Solid State amplifiers are NOT compatible with DMR and P25 modes.
Not Yet Reviewed
$169.99
Alinco DR-03T 10 Meter FM Mobile Transceivers
Alinco DR-03T 10 meter FM mobile transceivers are capable, reliable, easy-to-use, compact 10 meter transceivers. With Alinco DR-03Ts, you will discover exciting 10 meter FM communications! Working DX is possible over thousands of miles by taking advantage of unique Solar Cycle propagation. Of course, even without favorable propagation conditions, ground wave simplex and local 10 meter repeaters will keep you communicating with friends. General features of DR-03T transceivers: * Wide and narrow FM modes * Super-wide 7 character alphanumeric display * 100 memory channels * CTCSS, DCS encode and decode, DTMF encode and Tone-burst are all standard * Ten autodial memories * Clean, clear, quality audio * Theft alarm feature * Includes a large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory/VFO, plus more * Stays in mode you select (voice/packet) even through power/off cycles * Compliant to RoHS as a lead-free product Transceiver specifications: * Frequency range TX and RX: 28 to 29.695 MHz * Channel steps 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 kHz * Memory: 100 channels plus 1 quick recall (CALL) * CTCSS tone encoder/decoder 39 tones * Digital coded squelch encoder/decoder 104 codes * Antenna impedance: 50 ohms unbalanced (SO-239) * Frequency stability: Plus/minus 7 ppm * Power requirement: 13.8 V nominal, 11.7 to 15.8 V * Supply polarity: Negative ground * Current drain: TX High 3.0 amps, RX: 0.6 amps maximum * Usable temperature range: 14 to 140 degrees F * Dimensions (w/o projections) 5.59 in. (W) x 1.57 in. (H) x 6.85 in. (D) * Weight: 35.3 oz. Transmitter details: * 10 watts, selectable medium 5W, and low 2W, power settings * Modulation system: Variable-reactance frequency modulation * Spurious emission: Less than -40 dB * Maximum frequency deviation: Plus/minus 5 kHz (FM), Plus/minus 2.5 kHz (Narrow FM) Receiver details: * Receive system: Double-conversion Superheterodyne * Sensitivity: -12dB SINAD, less than -12.0 dBu * Intermediate frequency 1st IF 10.7 MHz, 2nd IF 450 kHz * Selectivity: FM -6dB: plus/minus 12 kHz or more, -60dB: plus/minus 28 kHz or less; NFM -6dB: plus/minus 6 kHz or more, -60dB: plus/minus 16 kHz or less * Audio output power: More than 2 watts (at 8 ohms, 10 percent THD) Note: For additional information, please look at the files under the "Documentation" tab. Included accessories: * Instruction manual * EMS-57 DTMF microphone * Mounting bracket with screw kit * DC power cable * Mobile microphone holder * Alarm cable Optional accessories: * Microphone: EMS-53 plain, no keypad * Digital voice unit: EJ-47U * DC switching power supply: DM330MVT (120 VAC) 30 amp Operating 10 meter FM mobile can be a great way to enhance your travel. Whether it's FM DX, ground wave or local repeaters, one of these Alinco DR-03T 10 meter FM mobile transceivers available from DX Engineering will offer local and DX 10 meter FM mobile fun!
( 1 )
$255.95
Eton Odyssey Multi-Band Bluetooth Emergency Radios
Eton Odyssey Multi-Band Bluetooth Emergency Radios are the ultimate companion for your outdoor adventures and emergency preparedness needs. With its comprehensive AM/FM/Shortwave/Weather band coverage, you can stay connected to broadcasts from around the world, ensuring you're never out of touch with the latest news and weather updates. These radios are packed with features to keep you safe and informed during emergencies. It comes equipped with NOAA Weather Alerts, ensuring you're aware of severe weather conditions in your area. Multiple power options are available, including the 2000mAh Rechargeable Lithium-ion Battery and high-efficiency solar panel charging will keep this radio ready when you need it most. You can also use 3 AAA alkaline batteries as a backup power source (not included). The Eton Odyssey offers versatility with a 5V 1.0A USB output for charging smartphones and other devices, ensuring you stay connected in any situation. The safe battery charging feature protects your device and battery life. For ultimate preparedness, the hand crank charging option is available making the Eton Odyssey perfect extended use. Just 4 minutes of hand cranking yields 10-15 minutes of music, weather updates and news, along with 1 minute of talk time. The Safe Battery Charging Protection Chip ensures the longevity of your battery. This emergency radio features a digital tuner and display for precise station selection and tuning. It also includes Bluetooth connectivity, making it an all-in-one entertainment and communication device. The IPX4 weather-resistant design ensures durability in various conditions, while the bright LED flashlight, LED beacon, and siren provide essential visibility and signaling in emergencies. Additional features include a DC power input via the included USB-C cable, an AUX-IN jack, headphone jack, alarm clock, and digital clock. The carabiner allows you to conveniently clip it to your belt or go-bag, ensuring it's always within reach. For added security, the SOS emergency beacon and siren are invaluable tools for getting help when needed. With its impressive array of features, this emergency radio is an indispensable tool for adventurers and a vital component of your emergency preparedness kit. Stay connected, stay safe, and stay informed with the Eton Odyssey Multi-Band Bluetooth Emergency Radios Additional Features and Specifications: Includes: ODYSSEY Radio, USB-C Cable, Carabiner, Owner's Manual - Reception- FM – 76 - 108MHz AM – 520 - 1710kHZ SW – 3.2 - 22MHz WB – 162.40 - 162.55MHz - Audio Output Power: 2W / 4W for Bluetooth - Output Voltage: 5V/1A - Battery: Built-in - 2000mAH 18650 Lithium Ion, or 3 AAA – Not Included - Speaker: 45mm, 4Ohm, 5W - Generator Power: 2.5W - Operating Temperature Range: 32 °F - 104 °F (0 °C – 40 °C)
Not Yet Reviewed
$99.99
Sangean WFR-39 FM-RBDS/Internet/Air Music Digital HD Bluetooth Portable Radios
Sangean WFR-39 FM-RBDS/Internet/Air Music Digital HD Bluetooth Portable Radios allow you to access countless internet radio stations as well as your favorite cloud music sources like Spotify, Amazon Music, Deezer, Napster, Qobuz and TIDAL. Connect to your favorite local radio stations with built-in Smart Local Radio Preference Management and search for stations by city, state, or zip code with no more static or interference. Download the free "Air Music" app and control the WFR-39 from any smartphone or device and stream your favorite programs and music with built-in Bluetooth 5.0 (radio and smartphone must be connected to the same WiFi network). The WFR-39 offers a generous memory bank of up to 250 station presets and a customizable quick-access menu. Choose between 5 different alarm timers; buzzer, melody, internet radio, USB, or Spotify and adjust the sound output with 9 different EQ modes (Normal / Flat / Jazz / Rock / Soundtracks / Classical / Pop/ News / My EQ). Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Additional Features and Specifications: * Built-In High-Quality Speaker * Scheduled Playing * Dual Alarms * Sleep and Nap Timers * Adjustable Dimmer • Weather Information * Speaker - 2.25 in. 8 ohms * Speaker Output Power – 1 Watt * 3.5mm Stereo Headphone Jack * Built-in Lithium-ion Battery 3.65 VDC / 2.6 A * Battery Life: Approximately 7 hours of Listening at Normal Volume Level * USB Power Cable - USB Type-A to Type-C (included) * 5 VDC / 2.4 A Power Adapter Optional (Not included) * Charging time: Approximately 5.5 Hours in Standby Mode / 13 Hours in Power On Mode * Frequency range: FM Band: 87.5-108 MHz * Wi-Fi – 2412 MHz ~ 2472 MHz for 11b / g / n (HT20) / 11n (HT40) 802.11b / g / n (WLAN) Encryption: WEP, WPA, WPA 2 (PSK), WPS * Bluetooth 5.0 Connectivity * Aux-In * Operating Temperature Range – 32 - 104 (0° to +40°C)
Not Yet Reviewed
$189.99
LDG Electronics Z-100A Automatic Antenna Tuners
The LDG Electronics Z-100A Automatic Antenna Tuner comes with a standard DC cable for use with any transceiver, and three of the most popular transceiver interface cables. Z-100A tuners feature LDG's famous 10:1 SWR tuning range that matches Dipoles, Verticals, End-Fed Half-Waves (EFHW), G5RVs and even Off Center Fed dipoles and Windham antennas. Easy integration with dozens of modern transceivers means plug-and-play operation could not be simpler. The updated compact and lightweight tuner goes anywhere with any HF radio—desktop, portable, parks, islands, or tall summits. The Z-100A Automatic Antenna Tuner works with all HF radios up to 125 watts RF output (30 watts digital) and can be interfaced with dozens of modern transceivers. An interface cable isn't required for semi-automatic operation. Whether or not the Z-100A tuner is interfaced with the transceiver, it has an internal frequency counter and 2,000 memories to store each operating frequency with antenna tuning parameters. Memory retuning occurs in only 100 milliseconds, with the initial full tuning cycle requiring an average of only 6 seconds. For use with radios that are not control interfaced, including Elecraft and FlexRadio, supply DC to the Z-100A tuner with the IC-104 cable. Simply key up the radio with a low power carrier, push the TUNE button on the Z-100A, and the built-in frequency counter initiates the tuning cycle. Also included with the LDG-Z-100A are three interface cables that are compatible with many modern Yaesu and Icom transceivers. Here is a listing of interface cables, compatible transceivers and how the tuner functions with each group of transceivers: - Press TUNE Button on Radio or Tuner – Interface keys radio automatically: IC-100 Cable (included) - ICOM AH-3 or AH-4 Compatible (See Navigation at LDG-IC-100 for listing of applicable ICOM models) - Press Button on Tuner – Interface keys the radio at low power automatically: IC-108 Cable (included with LDG-Z-100A) - Yaesu FT-710, FT-891, FT-991A, FT-991, FT-857/D, -897/D, -100/D IC-109 Cable (included with LDG-Z-100A) - Yaesu FTdx10, FTDX-1200, FT-950, FT-450 (10-pin mini-DIN LINEAR Port must be used on these models) IC-115 Cable (optional) - Yaesu FTDX-101D, FTDX-3000 IC-105 Cable (optional)- Alinco EDX-2 Compatible, DX-70, DX-77 - Key Radio (low power carrier) and Press Button on Tuner: IC-106 Cable (optional)- KENWOOD AT-300 Compatible (See Applications tab for all Kenwood models) IC-105 Cable (optional)- ALINCO SR8T, SR9T - Power Only – Key Radio (low power carrier) and Press Button on Tuner for semi-automatic tuning operation with any HF transceiver up to 125W SSB/CW, 30W Digital: IC-104 Cable (Included with LDG-Z-100A) - Power, Ground, Key, Start LDG Electronics Z-100A Automatic Antenna Tuner Specifications: Frequency Range: 1.8 to 54MHz Power: 125W PEP SSB and CW, 30W Digital (including FT8, RTTY, etc.) Input Impedance: 50-ohm Connectors: SO-239/UHF Female Tuning Range: 10:1 SWR, 3:1 on 6M Memories: 2000 Retune Time: Less than 1.0 second Voltage: 13.8VDC +/-15% Current Draw: 500mA tuning, 20mA idle Dimensions (WHD): 6.30 x 1.50 x 6.30in., 160 x 40 x 160mm Weight: 1.50lbs., 680g LDG continues to set new standards for auto-tuners and accessories in amateur radio service. LDG Electronics is a family-owned and operated company dedicated to bringing innovative, quality products to the amateur market. Their focus is anticipating and meeting customer needs and providing world-class support.
( 1 )
$199.99
SSB Electronic DCC-5000PRO Bias-Tee Remote Power Inserter
SSB Electronic DCC-5000PRO Bias-Tee Remote Power Inserter is used to power preamplifiers and converters via the coaxial cable. The RF-compatible DC power design covers 10 MHz through 6 GHz using a ceramic circuit board to guarantee extremely low attenuation. This unit is perfect for providing direct DC power to receive-only LNA and mast-mount preamplifiers, or when used with a sequencer for a RX/TX relay equipped mast-mount preamplifier. Specifications DCC-5000PRO: Frequency Range: 10 MHz through 6 GHz RF Connectors: Type-N female Insertion Loss. Typ.: 10 MHz -150 MHz: <0.10 dB 435 MHz: < 0.13 dB 1300 MHz: <0.35 dB 2400 MHz: <0.50 Db 3400 MHz: <0.68 dB 5600 MHz: <0.85 dB Isolation RF to DC: > 60 dB DC Connector: 2.5mm x 5.5mm, center-positive Maximum DC voltage: 30 VDC Maximum DC current: 500 mA
Not Yet Reviewed
$110.99
SSB Electronic LNA-5000 50–5000 MHz Wide Band Mast-Mount Preamplifiers
SSB Electronic LNA-5000 50–5000 MHz Wide Band Mast-Mount Preamplifiers increase signal sensitivity for scanners, receivers, and measuring devices. They may also serve as a low-power amplifier or buffer amp. Built with a modern MMIC on a low-loss ceramic microwave substrate, it provides approximately 20 dB gain, a low 2 dB noise figure, excellent large-signal handling with IP3 greater than 30 dBm, and input IP values improved by 20 dB over the previous version. An input amplitude limiter helps protect against electrostatic discharge. The LNA-5000 supports up to 160 mW PEP / 20 dBm output, uses Type-N female connectors, covers 50 to 5000 MHz, and operates from a 10–20 VDC supply either directly through the DC Input UHF female connector or remotely through the RF coax using an optional DCC-5000PRO Bias Tee.
Not Yet Reviewed
$284.99
On Sale
RigExpert Antenna Analyzers
RigExpert Antenna Analyzers are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines. Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). Their large, bright LCD screens provide graphic illustration of SWR, impedance; return loss, and much more. Easy to use measurement modes, as well as additional features such as connection to a personal computer (to plot SWR, R, X and Smith charts, etc.); make RigExpert Analyzers attractive for professionals and hobbyists alike. They are compatible with several operating systems, including Windows© 10, 11 and Mac, with software download*. The graphic display of various parameters over a wide frequency range is a key feature of these analyzers. This significantly reduces the time required to adjust an antenna. ZOOM models allow you to zoom-in on graph points for clearer analysis. USB connection allows export of sweep files with Antscope for Android or Antscope2 software to PC or MAC. *(download from the manufacturer https://rigexpert.com/products/software/). Many models have Bluetooth for direct file transfer for galvanic isolation without a USB cable, which provides the most accurate measurements. RigExpert Antenna Analyzers are available in several models with greater frequency range of operational features. Some have SO-239 UHF female connector, except for most models that operate at 230 MHz and above that have a Type N female connector. An array of options are available to cover almost any need for the professional and the Amateur. The following tasks are easily accomplished by using RigExpert Antenna Analyzers: * Rapid check-out of an antenna * Tuning an antenna to resonance * Antenna SWR and impedance measurement and comparison before and after a specific event (rain, hurricane, winter, etc.) * Making coaxial lines or measuring their parameters * Cable testing and fault location * Measuring capacitance or inductance of reactive loads *Send data to laptop for larger graphical display and further analysis. Note: For additional product information, please look at the files under the "Documentation" tab. When you need a versatile antenna analyzer for Amateur Radio or professional use, you'll find that one of these RigExpert Antenna Analyzers, from DX Engineering, will be well suited to the task!
( 513 )
$479.95
$319.99
—
$439.95
Georgia Copper Flexible Ground Strap Jumpers
Georgia Copper Flexible Ground Strap Jumpers are excellent for low impedance outdoor grounding and HF antenna feedpoint and radial system connections. Even weathered to a dull patina, copper strap does not lose its low impedance advantages over wire or cables, for DC and AC through HF and VHF. Plus, flexible copper strap is far superior to tinned copper braid, which holds moisture and disintegrates which causes a undesirable increase in connection impedance over a relatively short time. Flexible SOLID Copper Strap Jumpers come in pre-cut lengths at 1 in. or 3/4 in. widths and 0.022 in. thickness, punched with 0.280 in. holes at each end, to accommodate 1/4 in. bolts. They're available in two-packs at six different lengths, 6 in., 12 in., 24 in., 36 in., 48 in., 72 in. and also in a variety pack that contains one piece of all six lengths. Order and use any of these specific length straps for your project. Or, use your tin snips and your imagination to make all types of low impedance connections for surge protection grounding boxes and panels, protectors, equipment racks, vertical antenna feedpoints, radial system connections and antenna feedpoint connections from a bolt terminal balun to the driven elements. This pre-cut copper strap may also be used as a shack ground bus or for the bus bar connection to the station ground rod or rods. Hobbyists and Electricians order extra copper straps to have on hand and be ready for those grounding and antenna connection projects that come up. Georgia Copper Ground Strap Jumpers are here at DX Engineering, ready for your needs.
( 10 )
$45.99
bhi Ltd Six Way Switch Box
Don't keep disconnecting cables...get a switch box! If you need to connect more than one piece of equipment to your bhi Noise Eliminating Speaker or In-Line Module, the Six Way Switch Box is the answer. It allows up to 6 pieces of equipment to be connected to a noise eliminating speaker, in-line module or extension speaker. The Six Way Switch Box features: * Three inputs loaded at 8 Ohms * Three un-loaded inputs for low level microphone signals * Dimensions (WHD): 4.13 x 1.57 x 2.95 in. (105 x 40 x 75mm) * Supplied with two 4 ft. audio cables with 3.5mm mono plugs Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. You like your DSP stuff. Switch it up! Order a bhi Ltd Six Way Switch Box from DX Engineering and process all that audio!
( 2 )
$55.99