Availability
478 Results Found For "in-line"
Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines
Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines are constructed from tough Aramid fiber. Aramid fiber features excellent dielectric properties and a strength-to-weight ratio five times greater than steel guy wire! Add to that their low-stretch and low-creep characteristics—and you have an ideal material for broadcast tower guys. Today's Phillystran tower guying systems based on Aramid fiber are the result of many years of real-world experience. Phillystran HPTG-I systems eliminate the problems associated with EHS steel cable, such as electromagnetic interference (EMI), radio frequency interference (RFI), signal suppression, directional irregularities and white-noise arcing. You may not have a broadcast tower, but your Amateur Radio tower can benefit by using Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines from DX Engineering!
( 23 )
$0.99
—
$18,750.00
bhi DSP Noise Cancelling In-Line Modules
bhi DSP Noise Cancelling In-Line Modules eliminate noise and interference to let you hear more clearly! This new audio DSP unit cleans up noisy signals and works on most radios and receivers. It comes with the latest bhi DSP noise cancelling technology—which brings improved audio quality to the listener when operating in noisy conditions across all radio bands. The audio is clearer and more intelligible as a result. It's very easy to connect the In-Line Module between your radio and external speaker with the included 3.5mm male mono patch cable. This model delivers plenty of clean, noise-free audio with its 5W audio amplifier. The speaker output is muted when headphones are connected to the mono headphone output jack. When the unit is switched off, the audio bypass feature routes the signal directly through to the loudspeaker. bhi In-Line Modules provide simple control of all features. Their three-position switch turns the unit on and switches the noise cancellation on and off. The "Status" LED illuminates red when power is applied and changes to green when the noise cancellation is active. Set the radio AF gain to provide an audio input level that does not flash the overload LED. An audio output control adjusts speaker or headphone levels. Also included are a User Manual and four small rubber feet, plus the previously mentioned 3.5mm male mono patch cable for connection to your radio and a fused 2.1mm DC power lead. This unit may be powered by a user-provided 10 to 16V DC power supply or optional wall supply, BHD-PSU12-2A-WW. bhi In-Line Module features and specs: - Eight noise cancelling levels, 8 to 40dB - Tone reduction up to 65dB - 5W audio amplifier - Audio input overload indicator - Status LED indicates power and DSP operation - Audio bypass feature when switched off - Speaker output connection 3.5mm mono jack - Headphone 3.5mm mono jack - DC Input: 2.1mm center positive, requires 10 to16V DC @ 500mA min. - Dimensions, WHD: 5.315 x 2.559 x 1.811 in. (135 x 65 x 46mm) - Weight: 10.6 oz. (0.3kg)
( 13 )
$275.99
PackTenna Mini In-Line RF Feedline Chokes
PackTenna Mini In-Line RF Feedline Chokes are designed to suppress RF interference caused by common mode current flowing from the antenna feed point back to the radio. This type of current can disrupt radio performance and affect nearby equipment. In-line chokes are recommended for all end-fed antennas when operating above 20 watts. While you may not experience issues immediately, RF interference can occur as you increase power, change bands, adjust coax length, or reposition the antenna.
( 1 )
$75.00
QuickCar In-Line ATC Fuse Holder Kits
QuickCar In-Line ATC fuse holder kits include holder and ATC fuses. Install in a power wire to protect valuable electrical components. Includes 12-gauge in-line fuse holder and one each: 5 amp, 10 amp, 15 amp, 20 amp, 25 amp, 30 amp fuses.
Not Yet Reviewed
$6.95
bhi Dual In-Line Mounting Stand
The bhi DL-STD1 Dual In-Line Mounting Stand is made from quality high-impact clear acrylic and is ideal for mounting the Dual In-Line noise cancelling In-line Module. The module simply sits horizontally in the stand allowing you to see and operate all the controls more easily. The audio and power cables can be routed from the top and to the rear for a neat installation. The headphone socket on the Dual In-Line is easily accessible from the side of the unit. The bhi DL-STD1 Dual In-Line mounting stand is made from quality high-impact clear acrylic and is ideal for mounting the Dual In-Line noise cancelling In-line Module. The module simply sits horizontally in the stand allowing you to see and operate all the controls more easily. The audio and power cables can be routed from the top and to the rear for a neat installation. The headphone socket on the Dual In-Line is easily accessible from the side of the unit. The stand comes boxed with Velcro for fixing the unit more securely to the stand.
Not Yet Reviewed
$17.99
Tower Guy Line Galvanized Turnbuckles
Tower Guy Line Galvanized Turnbuckles provide tension adjustments for metallic or non-metallic guy line tower support systems. These are hot-dip galvanized heavy-duty cast metal turnbuckles that have threaded casings with "E&J" Eye and Jaw or "J&J" Jaw and Jaw screw bolts at opposite ends. They are available in various sizes to provide the correct turnbuckle load capacity which is selected to exceed each guy line load rating required for the tower. With the exception of concrete and rebar, virtually every item that is required for your tower project is available from DX Engineering.
( 1 )
$38.99
—
$67.99
Preformed Line Products Big Grip Dead Ends
Preformed Line Products Big Grip galvanized Dead Ends are available in multiple sizes to facilitate the guy line installation of your tower. Using genuine Preformed Line Products Dead Ends will give you an added sense of security, knowing that the investment you've made in your tower is stable and safe.
( 5 )
$10.79
—
$109.99
DX Engineering Control Line Terminal Boards
DX Engineering Control Line Terminal Boards are designed to provide a flexible and simplified approach to control line surge protection. The DXE-CLTB is a small, 3 inch square printed circuit board (PCB) with four ten-wire compression screw terminal blocks that handle from 14 to 26 AWG conductors and up to 10A. The two outer terminal blocks are for input and output of the control wires and the two 45 degree angled ten-wire compression screw terminal blocks are for connecting the required number of individual electronic surge protection components. This provides for the choice of components to install between the control line and ground for shunt protection. Metal Oxide Varistor (MOV), Gas Discharge Tube (GDT), EMP Suppressor TVS Diodes, RF Bypass Capacitors and other wire lead components are easily connected between each control line conductor and ground with the DXE-CLTB. This open-board, no-chassis concept allows easy mounting on a single point grounding panel, to support simplified inspection and exchange of control line electronic surge protection components that should be done on a regular basis. For effective protection wherever electronic devices are used as a shunt to ground, a low impedance ground is crucial. The DXE-CLTB Control Line Terminal Board has four corner ground plane screw holes. It includes a hardware kit of four self-tapping screws, spacers and external tooth washers, for mounting the PCB on a metal grounding panel inside an enclosure. The DXE-CLTB-M Control Line Terminal Board also includes a 10-pack of MOVs. The following components are available separately for a variety protection projects: DXE-MOV-82VDC-10 Metal Oxide Varistor, Surge Protector, max. 82VDC/50VAC Pack of 10 DXE-GDT-4KV-5 Gas Discharge Tube, Surge Arrestor, 4kV, Pack of 5 DXE-TVS-1500-10 ESD Suppressor, TVS Diode, Bidirectional, 17VDC max., Pack of 10 DXE-CAP-PT1UF-10 Capacitor, Ceramic, 0.1uf, 1kV DC, RF Bypass, Pack of 10
Not Yet Reviewed
$62.99
—
$69.99
DX Engineering Guy Line Guards
DX Engineering Guy Line Guards are used on towers to prevent damage to coaxial cable rotator loops from rubbing directly on metal guy lines or dead ends. Guy Line Guards are a high visibility yellow poly plastic tubing material that is split lengthwise for easy installation on existing guys. Each Guard features a single hole for the included zip-tie to secure it in place. For coax protection they are mounted at the top of the guy lines and, since they are yellow in color, Guy Line Guards may also be mounted at the bottom of the guy lines to warn people that the guy line is present. Guy Line Guards are approximately 45 inches (1.14 m) in length and come in a set of three.
( 4 )
$35.99
Loos Professional Guy Line Tension Gauges
Loos Professional Guy Line Tension Gauges offer a series of instruments to accurately measure the tension in steel guy cables from 3/32 up to 3/8 in. diameter. These gauges are designed for setting the proper tension in applications such as supporting cables for Amateur Radio towers, professional radio towers and the standing rigging of sailboats. They are also handy for tensioning steel cables on large tents and other structures. These "Professional Models" provide higher durability, accuracy and convenience of use when compared to other brands. Manufactured of rugged anodized aluminum, these gauges are corrosion resistant and will give many years of quality service. You may hook these gauges be on the wire and they will remain in position while the tension is adjusted. "Just watch the pointer move." Detailed operating instructions are included with each tension gauge. Click on "More Detail…" for information on the size of gauge you'll need. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Do you want to easily balance your guy-line tension? Take the slack out of your guy lines! Order one of these Loos Professional Tension Gauges from DX Engineering.
( 6 )
$162.99
—
$329.99
DX Engineering Guy Line End Caps
DX Engineering Guy Line End Caps are designed to work with silicone sealer to cap off and seal your cut Phillystran guy line. The end caps are manufactured from high quality vinyl material and are available in different sizes to fit your specific guy line diameter.
( 9 )
$19.99
Phillystran PLP Big Grip Dead-Ends
Phillystran has answered the call for field-installable nonmetallic guy systems with their PLP Big Grip Dead-Ends. Designed for use with Phillystran HPTG-I Aramid fiber guy lines, PLP Big Grip Dead-Ends will ensure a stable installation for all of your antenna or tower projects. Features include: * Grips designed to match rope twist * Galvanized steel and "C" coat construction * Cross-over marks that indicate a starting point for installation * Color-coded for easy identification of strand size * Short-leg/long-leg design so installer always knows which leg should be started Designed for use with Phillystran guy line strands, PLP Big Grip Dead-Ends from DX Engineering will ensure a stable installation for all of your antenna or tower projects.
( 7 )
$15.99
—
$35.99
Loos Guy Line Clamp Kits
Loos Guy Line Clamp Kits are designed for use EHS steel guy lines. They are manufactured from durable forged steel and have a galvanized finish for protection against the outside elements. These kits include six individual clamps. In normal usage, six clamps is the number required to secure both ends of a single guy line. Order Loos Guy Line Clamp Kits from DX Engineering. NOTE: Phillystran for Yagi boom support, typically HTPG-1200I, may be clamped with this type of hardware. Phillystran that is used for tower guying, HTPG-2100I and larger, must be properly terminated with Guy Line Big Grips.
( 3 )
$8.65
Preformed Line Products Big Grip End Sleeves
Preformed Line Products Big Grip End Sleeves are used to finish the application of a dead end on a guy line. The End Sleeves, also known and "Grip Clips" or "Ice Clips" secure the grip tail ends and prevent them from opening or unraveling from ice intrusion or vibration. Be sure to select the proper size for the application.
Not Yet Reviewed
$7.29
—
$8.29
DX Engineering Phillystran Steel Tail Kits
DX Engineering Phillystran Steel Tail Kits provide the appropriate transition from non-metallic to metallic guying cable at the ground end of tower guying systems. Steel Tail Kits are available for Phillystran HPTG-4000I, -6700I and 11200I Guy Lines. What is the function of the steel tail? Here is the recommendation by Phillystran, the manufacturer of HPTG-I High Performance Tower Guy non-metallic guy lines: A steel tail is a length of EHS (Extra High Strength) steel guy line connecting the HPTG-I assemblies to the turnbuckle or guy anchor. The steel tail protects the HPTG-I assemblies from damage due to brush fires, lawn maintenance equipment or vandals. The steel tail length should be sufficient to get the bottom end of the HPTG-I assembly above arm's reach, or above brush tops (if located in a marsh or tall brush area). The HPTG-I should never pass through tree limbs or be allowed to rub against poles or trees. The steel tail allows for easier guy length calculations and serves as a guy tension monitoring point, as well as a safer area to attach guy grips during guy line installation and tensioning. Eliminating the hassle of buying a length of steel cable and obtaining a special tool to cut it, DX Engineering Phillystran Steel Tail Kits provide everything needed to isolate your tower's non-metallic guy cable from harm. Three different size kits are available for different tower guying requirements provided by Phillystran guy cables 4000I, 6700I and 11200I. Here are the items included in these innovative Steel Tail kits: - 12 ft. EHS steel guy line, Galvanized, in three kit sizes, 3/16 in., 1/4 in. or 5/16 in. - Porcelain Guy Line Strain Insulator, 502 or 504 depending upon kit size - Galvanized Steel Preform Dead End Big-Grips for EHS steel guy line, two per line - Heavy Duty Thimble, galvanized steel, appropriately sized for each kit - Cable Ties, UV protected Black, four, to secure installed Big-Grip ends Note: Phillystran guy line and Preform Dead End Big-Grips for Phillystran are not provided in this kit and must be ordered separately. DX Engineering Phillystran Steel Tail Kits provide Porcelain Guy Line Strain Insulators for the top end of the Steel Tail so that the galvanized steel Big-Grips for the Phillystran and for the EHS Steel Guy Lines do not touching and make RF noise. For three different size Phillystran guy line, HPTG-4000I, -6700I and -11200I, these kits are available exclusively from DX Engineering in 3-packs for each level of tower guying.
( 2 )
$79.99
—
$239.99
DX Engineering Bent Pin Shackles
DX Engineering Bent Pin Shackles are used for guy line attachment to towers for Amateur Radio and commercial applications. Also known as a clevis in the power industry, these shackles are specially designed with a removable bent bolt and locking nut to go through the outer hole of the matching guy strain insulators commonly known as the "502" or the "504" in ham radio tower work. Forged from 1/2 in. steel and hot dip galvanized, these Bent Pin Shackles have a minimum ultimate strength of over 12,000 lbs. and have a rounded end large enough to be used around a tower leg. However, they are typically connected to a guy attachment tower ear or guy bracket, with a screw pin shackle used as a link. The insulators that fit inside of this shackle accept the guy line big grips from either metal or non-metallic guy lines. For those who already have insulators, Bent Pin Shackles are offered in a set of three for each level of guying. We sell the matching DXE-502 and DXE-504 insulators in sets of three. Also available are two kits that include three Insulators of either size and three Bent Pin Shackles. Look to DX Engineering for the unique tower hardware that you need.
Not Yet Reviewed
$231.99
ROHN Turnbuckles
ROHN Turnbuckles are constructed with a steel sleeve surrounding internal steel screws used to pull anchor points closer together by turning the turnbuckle body. They are ideally suited for tensioning mast or tower guy lines. These turnbuckles are galvanized for weather resistance and long life. Working load for these turnbuckles starts at 1,200 lbs. and then goes up. Break strength, also known as ultimate strength, is 6,000 lbs. and up. If you are raising a new mast or tower, or just performing maintenance on your existing installation, these ROHN Turnbuckles from DX Engineering will take the strain, year after year after year!
Not Yet Reviewed
$116.99
DX Engineering 450 Ohm Ladder Line
DX Engineering 450 Ohm Ladder Line is a transmitting grade low-loss parallel-wire RF feedline featuring a strong, waterproof, UV black polyethylene insulation. To maintain the wire spacing between the conductors while reducing losses, the integral flat plastic material alternates with rectangular openings, which explains the "Window Line" nickname. Capable of handling over 3 kW of RF power, DXE-LL450 is a very low-loss transmission line across HF. It is ideal for exceptionally long feedline runs and for low band wire antennas operated on multiple bands on which the feedpoint impedance can vary significantly, causing mismatch and elevated SWR. Unlike coaxial cables, DX Engineering DXE-LL450 Ladder Line maintains low RF losses at frequencies where antenna feedpoint impedance mismatches cause high SWR. It can provide significantly higher efficiency than coaxial cable when feeding non-resonant antenna systems that are matched with a wide impedance range antenna tuner. DXE-LL450 450 Ohm Ladder Line is a high-quality flat RF feedline, about 0.938 in. wide (15/16") with two 16-gauge copper-clad steel wire conductors (29 AWG x 19 strands) that provide the strength to hold up for long spans between supports without twisting. It exhibits a nominal impedance of around 400 Ohms and a nominal Velocity Factor of 91 percent. For proper performance, LL450 Ladder Line must be installed suspended through the air supported by insulators every 25 ft. or less, kept at right angles and several inches away from other wires, and at least one foot away when run parallel to the earth or large metal surfaces. Installing with an axial twist of one turn per 10 ft. can reduce wind, rain and ice loading, RF coupling and RF noise. DXE-LL450 can be mounted with insulators and suspended on metal or wood posts or run along a wood fence line, only if the fence has no wires or metal mesh that couples RF noise or unbalances the feedline. Often used for non-resonant wire doublet antennas, DXE-LL450 can be more easily terminated outdoors to a DXE-MC20-C4-1 4:1 Balun or a DXE-MC20-1-1T 1:1 Balun. Then, with no inline switches or relays, directly connect the antenna system to a typical indoor wide range antenna tuner using a solid dielectric coax, not foam dielectric, to handle high voltage at high SWR. DXE-213U or DXE-214 Coaxial Cable Assemblies 12 or 18 ft. with PL-259s are perfect for this method, which eliminates the need for a special balanced tuner, and avoids the losses and detuning effects caused by unbalancing when ladder line is routed indoors near wires and ducts. DXE-LL450 is sold by the foot, previously sold as DXE-LL450-CTL, this is the same ladder line with a new part number. It is also available in spools of 500 ft. DXE-LL450-5C and 1,000 ft. DXE-LL450-1K, which are specified for DX Engineering Reversible Beverage System Antennas. NOTE: This type of feedline is intended for MF and HF use and is not suitable for use above 54 MHz. Also consider DX Engineering 300 Ohm Ladder Line, DXE-LL300, an excellent alternative low-loss HF feed line that reduces impedance extremes on non-resonant HF multiband antenna systems.
( 63 )
$1.18
—
$792.99
DX Engineering Rotator Control Line Protectors
DX Engineering Rotator Control Line Protectors are custom made surge protectors designed for use on rotator cables - up to 8 conductors. We routinely protect power and antenna cables, why ignore rotator control cables? These protectors are also ideal for control lines of remote antenna switches and any low voltage control system where voltages are normally below 60V DC or AC. External terminals allow convenient connection while the surge devices remain securely protected inside the metal enclosure. DXE-IS-RCT features include: * Weatherproof metal enclosure with cover, mounting stud and terminal gaskets to deter water from entering the enclosure. * Terminal strips to connect up to eight rotator control wires * 1/4 in. x 20 mounting stud allowing multiple mounting configurations * Each line connection has an individual shunt MOV for maximum surge protection * Voltage spikes exceeding 82 Vdc (in either polarity) will be shunted to ground * RoHS compliant construction DXE-IS-RCT protectors are recommended to be installed on a tower leg or ground rod using an optional DXE-J-1 or DXE-J-2 Grounding Clamp or a DXE-UCGC Copper Ground Rod Clamp. The location you choose for your DXE-IS-RCT should provide a good, low-impedance ground connection. The surface to which a grounding clamp is connected should be thoroughly cleaned to a bright-colored surface and then treated with a conductive anti-oxidant coating. This procedure will minimize weather-related complications and improve conductivity for your DXE-IS-RCT. DXE-CCK Copper Cleaning Kits provide cleaning pads and copper paste which is ideal for this application. If a tower or mast is being used and is properly grounded, your DXE-IS-RCT may be connected to the base of that structure just above the grounding point. For best results, follow the installation instructions carefully. As with all electronic equipment, observe proper safety considerations. For example: Do not install your DXE-IS-RCT if there is a storm anywhere in your area. Do not adjust or touch the grounding system equipment when there is a storm anywhere in your area. Make sure all power is removed before making any adjustments or working on any ground system or grounding components. DXE-IS-RCT Specs: Surge Energy: 6500 A or 38 J (Max energy 8/20) Response Time: 10 ns typical, 25 ns max. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For the best protection of your rotator systems, order and install your DX Engineering Rotator Control Line Protectors and keep the voltage surges off of your control lines.
( 10 )
$189.99
DX Engineering 300 Ohm Ladder Line
DX Engineering 300 Ohm Ladder Line is a transmitting grade low-loss parallel-wire RF feedline featuring a strong, waterproof, UV black polyethylene insulation. To maintain the wire spacing between the conductors while reducing losses, the integral flat plastic material alternates with rectangular openings, which explains the "Window Line" nickname. Capable of handling over 2.5 kW of RF power, DXE-LL300 is a very low-loss transmission line across HF that is ideal for long feedline runs. It is an excellent feedline choice for a low band non-resonant wire antenna operated on multiple bands on which the impedance varies significantly, causing mismatches and elevated SWR. Unlike coaxial cables, DX Engineering DXE-LL300 Ladder Line maintains low RF losses at frequencies where impedance mismatches cause high SWR. The lower impedance of DX Engineering 300 Ohm Ladder Line is actually better suited than 450 ohm ladder line for limiting the impedance extremes of non-resonant multiband antennas. It can provide significantly higher efficiency than coaxial cable for feeding non-resonant antenna systems that are matched with a wide impedance range antenna tuner. DXE-LL300 Ladder Line is a flat, high-quality RF feedline, about 0.438 in. wide with two 18-gauge copper-clad steel wire conductors that provide the strength to hold up for long spans between supports without twisting. It exhibits a nominal impedance of 275 Ohms and a nominal Velocity Factor of 88 percent. For proper performance, LL300 Ladder Line must be installed suspended through the air supported by insulators every 25 ft. or less, kept at right angles and several inches away from other wires, and at least one foot away when run parallel to the earth or large metal surfaces. Installing with an axial twist of one turn per 10 ft. can reduce wind, rain and ice loading, RF coupling and RF noise. DXE-LL300 can be mounted with insulators and suspended on metal or wood posts or run along a wood fence line, only if the fence has no wires or metal mesh that couples RF noise or unbalances the feedline. Most often used for non-resonant wire doublet antennas, dipoles, and inverted-vees, DXE-LL300 can be more easily terminated outdoors to a DXE-MC20-1-1T 1:1 Balun. Then, with no inline switches or relays, directly connect the antenna system to a typical indoor wide range antenna tuner using a solid dielectric coax instead of foam dielectric, to handle high voltage at high SWR. DXE-213U or DXE-214 Coaxial Cable Assemblies 12 or 18 ft. with PL-259s are perfect for this method, which eliminates the need for a special balanced tuner, and avoids the losses and detuning effects caused by unbalancing when ladder line is routed indoors near wires and ducts. DXE-LL300 is sold by the foot, previously sold as DXE-LL300-CTL, this is the same ladder line with a new part number. It is also available in spools of 500 ft. DXE-LL300-5C and 1,000 ft. DXE-LL300-1K. NOTE: This type of feedline is intended for MF and HF use and is not suitable for use above 30 MHz.
( 25 )
$0.77
—
$496.99
Yaesu FGPS-5 Plug-in GPS Modules
Product Line Title: Yaesu FGPS-5 Plug-in GPS Modules Yaesu FGPS-5 Plug-in GPS Modules are optional GPS modules designed specifically for the FTX-1, significantly expanding the transceiver's functionality in mobile use. This compact accessory provides accurate position data such as latitude, longitude, direction, speed, and altitude, making it ideal for APRS (Automatic Packet Reporting System) applications. Its lightweight and rugged design ensures it does not interfere with the mobility of the FTX-1 and is optimized for use in various conditions to maintain a stable GPS connection. The seamless integration of the FGPS-5 is evident in its easy installation and operation, enhancing the mobile and portable use of the radio. It is a reliable choice for radio amateurs who want to share their position or navigate efficiently.
( 5 )
$79.99
Preformed Line Products Economy Guy line Markers
Preformed Line Products economy guy line markers help to mark and identify down guys or other wire and cable installations where anchoring devices are exposed to pedestrian and/or vehicular traffic. Do not let the word "Economy" fool you—they feature the same quality, UV-stabilized polyethylene material as their classic guy markers. The simplified design helps create a more streamlined manufacturing process. The PLP corporation is recognized as a global leader dedicated to innovating products uniquely suited to meet the needs of their customers, and their selection of Preformed Line Products economy guy line markers are proof. Additional features and specifications include: * Lightweight one-piece design * High visibility orange and yellow colors available * Dimensions – 1 1/4 in. diameter x 8 ft. long * Easily attached with a choice of 14 in. nylon universal cable ties (UCT), patented LOOP LOCK pins, or no attachment device (application dependent) * Fits on cable strands ranging from 3/16 in. to 1/2 in. (4.7mm to 12.7 mm) diameter * Installs on down guys in seconds
Not Yet Reviewed
$20.99
ICOM Transceiver Plug-In Modules
ICOM transceivers have a plethora of built-in features. But, the fun doesn't have to stop there, with their line of Transceiver Plug-In Modules that add additional capabilities, including, Bluetooth Units, voice synthesizers, decoders, and D-STAR digital units.
( 13 )
$76.49
—
$101.99
Gripple Logo Setting Keys
These Gripple Logo Setting Keys are used to release the internal wedges that clamp guy line cables in place. Simply insert one of these keys into the cable-grip and push! You will separate the wedges and relieve the pressure. A must for re-tensioning cables or for removing the grips, these Gripple Logo Setting Keys are your key to success!
Not Yet Reviewed
$6.69