Availability
161 Results Found For "telescoping"
DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits
DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits bring together high quality and innovation for the Amateur Radio antenna experimenter and portable operator. Here are the latest telescopic tubing and clamp kits, offered in four sizes to satisfy the needs of almost any ham for temporary and portable antenna support, with speed and convenience in mind. Now, with shorter fiberglass tubing, transporting is much easier and shipping costs are reasonable once again! These Complete Kits include the all new DX Engineering Telescoping Fiberglass Tubing. They are made from high quality, pultruded fiberglass tubing with a nominal 0.120 in. wall thickness and a smooth finish for long term use. The two shorter sets have 48 in. sections; the four piece set can extend to 15 ft., and the seven piece set can telescope to 25 ft. The two sets that can extend to 46 ft. tall consist of seven 90 in. sections. The standard set starts with a 2 in. OD base and the Heavy Duty 46 ft. model features a massive 3 in. OD bottom section. DX Engineering Cam Lock Clamp Kits provide fast and easy operation of these portable telescopic fiberglass masts. Multiple clamps are included with each kit, and are the type that permanently mount on the lower tube and allow fast telescopic mast extension and collapsing using the integral Cam Lock Lever that secures the smaller inside tube. Each Cam Lock Clamp kit includes a 3mm Allen wrench that fits all three cap screws, two for the lower tube mounting clamp and one on the upper lever adjustment. Once properly adjusted, the closed lever of the Cam Lock Clamp will hold the upper tube in place very securely. A vinyl cap is included to cover the top of the smallest fiberglass tube being clamped. See all of the included clamps and tubing sizes in the chart, at each kit's images and at the "More Detail" link. Rope for the required guying of telescopic fiberglass masts is sold separately. DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits are the all-new 4 ft. and 7.5 ft. sets of sturdy tubing and easy-to-use clamps for your antenna project, and they ship at low cost! Order yours today!
( 149 )
$122.98
—
$281.98
DX Engineering Premier Telescoping Carbon Fiber Masts
DX Engineering Premier Telescoping Carbon Fiber Masts are the superior choice for portable and temporary antenna supports. These very high-strength and lightweight carbon fiber masts are available in four extended length versions; 24 foot, 33 foot, Heavy-Duty 33 foot and 49 foot. Their short section lengths allow easy transport and low cost shipping. The longest 49 foot model has a closed length of 81 inches; the other three models slide down to an amazing 69 inches! Surpassing the competition and fiberglass, these black UV resistant carbon fiber tubing masts are super lightweight and ultra-portable. Included lever-action cam-lock clamps secure the next smaller tube in place. Clamps are removable for placement of optional guy rings, and their lever grip is adjustable, both with the included 3mm Allen wrench. Each different size clamp mounts securely on a lower tube and its integral cam lock lever allows fast and easy telescopic mast raising and lowering. DX Engineering Premier Carbon Fiber Masts are lighter than aluminum and fiberglass and stiffer than steel of the same thickness. Their resistance to corrosion and breakdown is the best of these four temporary mast materials. Each section features a red color at the bottom to indicate minimum overlap when extending. Click on each model for specific dimensions and number of sections and clamps. These are the ultimate quality carbon fiber masts for portable and temporary antenna supports. Wherever you go and however you get there, DX Engineering Premier Telescoping Carbon Fiber Masts are the absolute best choice for your next portable antenna adventure.
( 24 )
$449.99
—
$1,211.99
Chameleon Antenna CFM-34 Heavy Duty Carbon Fiber Telescopic Masts
Chameleon Antenna CFM-34 Heavy Duty Carbon Fiber Telescopic Masts are compatible with all Chameleon's portable wire and MPAS Ready antennas. This mast is self-supporting and generally does not require guying, although some situations may require the mast to be guyed (especially with a large or heavy antenna or during windy conditions). The CFM-34 HD is especially useful in places where there are no trees or where putting wire antennas in trees is not permitted. A unique feature of the mast is the 3/8-24 stud at the base, enabling it to be mounted on the long ground spike mount (CHA SPIKE MOUNT [21 in.]), a surveyor tripod with the CHA SURVEYOR-A adapter, or no mount at all with the Protective Cap -- giving you a variety of options for installation of the mast. The CHA CFM-34 HD offers exceptional strength, lightweight construction, and the capability to retract to under six feet, rendering it an ideal portable mast for various outdoor radio activities such as Parks on the Air (POTA), camping, and recreational vehicle use. Its carbon fiber composition and secure locking sections provide both durability and a stealthy profile, suitable for emergency communications (EMCOMM). Additionally, the mast's unobtrusive design, coupled with its ease of deployment and relocation, make it well-suited for use on properties governed by Home Owners Associations (HOA).
( 1 )
$465.00
Chameleon Antenna CHA CFM Carbon Fiber Portable Telescopic Masts
Chameleon Antenna CHA CFM Carbon Fiber Portable Telescopic Masts are an ideal solution when there are no trees to hang your wire antenna—or when regulations prevent it—the CHA CFM-16 and CHA CFM-34 Carbon Fiber Masts from Chameleon Antenna deliver the perfect adventure-ready portable solution. Designed for rugged performance and maximum convenience, these self-supporting telescopic masts require no guying, making deployment fast and effortless. Engineered for radio operators who demand mobility and reliability, the CHA CFM series combines incredible strength with minimal weight. These masts can handle the toughest field conditions while maintaining the stealth and portability needed for discreet or tactical operations. Whether used as a manpack EMCOMM mast or a portable wire antenna support, the CHA CFM-16 and CFM-34 are ready for any mission.
( 5 )
$125.00
—
$175.00
DX Engineering Nomad Portable Telescopic Masts
DX Engineering Nomad Portable Telescopic Masts are unique, high-quality lightweight fiberglass portable masts designed for rugged conditions. Specifically intended for POTA (Parks On The Air), SOTA (Summits On The Air) and JOTA (Jamboree On The Air), Nomad masts are readily available for fast and simple deployment in any backpack or portable operation. Nomad Portable Telescopic Masts are available in four versions - Red or Black and 19 ft. or 23 ft. extended heights and they collapse small enough, and are light enough, to take on a backpack "hike-pedition" like SOTA, or to elevate a lightweight antenna for any portable or temporary operation, such as POTA (Parks On The Air). Features of DX Engineering Nomad Portable Telescopic Masts: * High-gloss fiberglass sections with a great combination of high strength and light weight * Non-conducting low-loss fiberglass construction *Friction Lock: Pull each section up with twisting motion to lock. When extending, start with the smallest section. When collapsing, start with the largest section. * Super short collapsed length for easy transport * Two distinct colors for different visual purposes; Stealth Black and High Visibility Red * Removable base cap to allow field repairs and sections to be removed, if desired * Hollow top-section allows wires to be fed through for a full length wire antenna * Perfect for use with DX Engineering Low Power Portable Dipole and Winder Kit Antennas Specifications: Nomad23 -Large mast * Extended length: 23 ft. (7 meters) * Packed length: 23 in. (58.4 cm) * Base with cap is 2-3/8 in. * Bottom Tube 1-15/16 in. * Top Tube - 1/8 in. * Weight with bag 3.11 lbs. Nomad19 - Small Mast *Extended 19 ft. (5.8 meters) * Packed length: 22 in. (55.9 cm) * Base with cap is 1-3/4 in. * Bottom Tube 1-7/16 in. * Top Tube - 1/8 in. * Weight with bag 1.72 lbs. * Mast Material: Medium-duty fiberglass (non-conducting) NOTE: All dimensions approximate.
( 9 )
$106.99
—
$142.99
Clearance
WiMo Aluminum Telescoping Masts
WiMo Aluminum Telescoping Masts are convenient for many tasks. Made of a strong yet lightweight weather-resistant alloy, these metric-sized masts are primarily intended for temporary and portable use. They may also be used for long-term installations with the WiMo WMO-23050 Metal Guy Ring Kit. The versatile masts have a range of uses, including vertical antenna construction, installation of weather stations, and mounting of a security camera. They're made of slotted aluminum tubing that can be extended to the desired length. Mast models are available with extended lengths of 5 to 16 meters (16.4 to 52.5 ft.). Each section can be locked solidly in place with the attached clamps. Load capacity of the masts is determined by the clamping length and height; depending on the diameter, weights up to 4 kg (8.818 lbs.) or more are possible. The maximum extension length of each section is limited by a marking ring at approximately 20cm (7.874 in.) above the bottom of the tube. The sizes of the telescoping aluminum tubing are in 5mm (0.197 in.) increments, with a nominal wall thickness of 2mm (0.079 in.).
( 4 )
$379.99
$165.99
—
$799.99
ROHN Telescoping Masts
ROHN Telescoping Masts are available in a variety of heights to suit your specific application. They are manufactured from steel and then galvanized for corrosion protection and come assembled with mounting hardware. All telescoping mast installations must be guyed or bracketed (sold separately) and should be performed by experienced or licensed installers. NOTE: Unless specifically listed as otherwise, these masts are over-weight and over-length for our standard UPS or FedEx free shipping. Freight charges may apply. When you need antenna supports, ROHN Telescoping Masts, from DX Engineering, are the time-tested solution!
( 93 )
$95.99
—
$289.99
Wimo Heavy Duty Fiberglass Telescoping Masts
Wimo Heavy Duty Fiberglass Telescoping Masts are quick and easy to set up, so they are ideal for portable operations such as Field Day, POTA, or a quick activation from a balcony or backyard. These reinforced telescoping masts are rigid, non-conductive and consist of a total of 10 segments. The non-removable bottom cap is flush with the bottom tube, so it does not increase the diameter of the mast. The diameter of the top tube is approximately 0.43 in. with a wall thickness of 0.04 in. and the bottom tube is approximately 1.80 in. with a wall thickness of 0.08 in. and can safely handle wire antennas, a small VHF Yagi, or other small devices.
( 10 )
$229.99
Comet CP-45 Telescopic Aluminum Masts
Comet CP-45 Telescopic Aluminum Masts are collapsible four-section masts. They may be extended to 14 ft., 8 in. and will collapse to a mere 54 in. These masts weigh only 3 lbs. Designed for light duty and stealthy applications, their maximum antenna load is 22 lbs. These masts are a maximum diameter of 1-5/16 in. and a minimum of 7/8 in., and friction-lock with their built-in nylon compression bushings. They incorporate a handy guy-bracket and 45 ft. of guy line. These CP-45 masts are designed to be supported by the companion Comet YS-45 Aluminum Tripods, sold separately. When you need light, portable, or stealthy antenna supports, remember that Comet CP-45 Telescopic Aluminum Masts will provide the special features that you need!
( 7 )
$184.49
SOTAbeams Carbon-6 Compact Ultra-Light Telescopic Masts
SOTAbeams Carbon-6 Compact Ultra-Light Telescopic Masts extend to 19 ft. and collapse to a handy 17 inches! Their super-lightweight carbon-fiber composition and nested length is perfect for carrying in your backpack. They're light enough to take on any excursion and are easily telescoping for rapid deployment. Ultra-lightweight portable operators, like mountain-topping backpackers, need a special mast to support their antennas. The new Carbon-6 has been designed for exactly this role. The Carbon-6 has been manufactured specifically for SOTABEAMS. Carbon fiber masts are slightly conductive and so extra care must be taken when using them near power lines. These masts are suitable for supporting lightweight horizontal or inverted-vee antennas. Because of their flexibility, we recommend a maximum antenna height of 16 ft. (5 meters). We do not recommend using these masts for supporting the center of dipoles with heavy feedlines or for use to support a vertical antenna. They are perfect for supporting the center of lightweight end-fed wire antennas. This mast is destined to become a popular choice for the portable operator who just wants to travel light and undertake more "extreme" forms of travel. Each section is set by friction lock, pulling each section firmly with a twisting motion for best lock. When erecting always start with the smallest section. When taking down always start with the largest section. Mast sections may be removed by unscrewing the end cap at the bottom of the mast and removing unwanted sections. Detailed Specifications of the SOTA beams Carbon-6 Compact Ultra-Light Telescopic Mast: - Extended length: 19.6 ft. max. (6 meters), approximate - Packed length: 17 in. (43 cm) - Number of sections: 18 - Wall thickness: 0.04 in. (1 mm) bottom - Weight: 10.6 oz. (300 g) - Mast Material: carbon fiber - Tube Diameter: Base 1.2 in. (31 mm), Top 3/32 in. (2.4 mm), - Base cap diameter: 1.25 in. (32 mm) - Tube color: white (base), black (other sections) - Supplied with black carry bag with tie-string
( 24 )
$85.99
I0JXX Aluminum Telescoping Antenna Masts
I0JXX Aluminum Telescoping Antenna Masts are constructed from strong, lightweight, and weather-resistant aluminum tubing, making them ideal for temporary, portable, and semi-permanent installations when properly guyed. These versatile masts are suitable for a wide range of applications, including deploying Amateur Radio antennas, installing weather stations, mounting security cameras, and more. Each mast features telescoping sections that extend smoothly to the desired height, with models available in extended lengths ranging from 23ft. to 49ft. (7–15m). For added stability, every section is secured firmly in place using integrated locking clamps.
( 2 )
$152.99
—
$509.99
SOTAbeams MINI Telescopic Fiberglass Poles
SOTAbeams MINI Telescopic Fiberglass Poles are a high quality fiberglass pole that extends to 13 ft. 6 in. (4.1m), nominal. Ideal for super-light portable ops - especially cycling! Two back to back MINIs can be used to make a loaded dipole. A plastic carry bag is included. Dimensions (approx.): Closed length 51cm = 20 in. Open length 4.1m = 13 ft. 6 in. Typical Weight 300g = 0.67 lb. (10.6 oz.). Dimensions and weight are approximate and will vary. Manufacture and markings varies depending upon source availability.
( 7 )
$60.99
ROHN Telescopic Mast Roof Mounts
ROHN Telescopic Mast Roof Mounts are completely assembled for a quick and easy flat or peaked roof-mount installation. These mounts are sized for antenna masts up to 2.25 inches in diameter. These mounts allow tall masts to be swung up or down along the ridge of the roof. The bottom of the mast inserts into the hinged base and is secured by set screws. This feature permits the user quick and safe access antennas for servicing or replacement. When combined with a guy-wire system or other stabilizing attachments, these ROHN Telescopic Mast Roof Mounts supply the base-support and convenience that your antenna installation needs. Use them to secure the bottom of your mast to decks, flat roofs, peaked roofs, concrete pads, or just about anything! Fixed or telescopic masts are an inexpensive solution to raising antennas! These ROHN Telescopic Mast Roof Mounts, from DX Engineering, are the perfect answer for mast-base support!
( 1 )
$155.99
Moonraker LMA-M 26ft. Portable Telescopic Masts
Moonraker LMA-M 26ft. Portable Telescopic Masts are an excellent choice for those seeking a reliable and lightweight solution for VHF/UHF antennas or similar applications. This mast features a six-section design, extending from a compact 5.5 ft. to an impressive 26 ft., allowing for versatile use in various settings. Constructed from durable aluminum, it offers a diameter range from 2 in. at the base to 1 in. at the top, ensuring stability and strength. Weighing approximately 8.8 lbs., it is easy to transport and set up, making it perfect for both temporary and permanent installations. The inclusion of guy rings enhances its stability, providing additional support in windy conditions. Whether you're an amateur radio operator or a professional, the Moonraker LMA-M 26ft. Portable Telescopic Mast delivers exceptional performance and convenience.
( 3 )
$357.99
SOTAbeams Tactical 7000hds Compact Heavy-Duty Telescopic Mast
SOTAbeams Tactical 7000hds Compact Heavy-Duty Telescopic Mast is a unique, high-quality portable mast designed for extreme conditions, which extends to a height of 23 ft. For years, SOTAbeams customers have asked for a heavy-duty telescopic mast of good height that packs small enough for serious portable operation. They wanted something that was up to the task of handling the most extreme conditions nature can muster; a mast that was stiffer than other products. After months of design work with a manufacturer of specialized composites, SOTAbeams is pleased to introduce the Tactical 7000hds (heavy-duty short) mast, available from DX Engineering. Features of the SOTAbeams Tactical 7000hds Compact Heavy-Duty Telescopic Mast: * Heavy gauge pole sections, 14 total—the perfect balance of strength, stiffness and weight for more demanding applications * Super short 23 in. packed length for easy transport * The very best extended length of 23 ft. for tactical use in extreme conditions (23 ft. is 7,000mm, hence its name: "Tactical 7000hsd" * Military colors for low visual signature * Camouflage carry bag with draw string (camouflage pattern may vary from batch to batch) * High impact foam shock absorber built into base * Non-conducting low-loss fiberglass construction * Hollow top-section allows wires to be fed through * Screw-cap base allows field repairs and section swap-outs * Perfect for use with SOTAbeams Band Hopper antennas "Every serious portable operator needs a Tactical 7000hds in their armory" Detailed Specifications*: * Extended length: 7 meters (23 ft.) * Packed length: 59 cm (23 in.) * Wall thickness: 2mm (0.1 in.) bottom, 1.3mm (0.05 in.) top * Weight: 1.65 kg (3.64 lbs.) * Mast Material: heavy-duty glass-fiber composite (non-conducting) * Tube diameter: top 4mm (0.16 in.), base 52mm (2.05 in.) * Base cap diameter: 61mm (2.4 in.) * Tube color: Pantone 19-0622 TPX Military Olive *NOTE: All dimensions approximate. FAQ: * The mast is made of Glass Reinforced Plastic (GRP) = Fiberglass. This is an insulator with excellent RF properties (very low loss). * Friction Lock: Pull each section firmly with a twisting motion for best lock. When erecting always start with the smallest section. When taking down always start with the largest section. * Top sections may be removed by unscrewing the end cap at the bottom of the mast.
( 19 )
$295.99
WiMo Telescoping Fiberglass Masts
WiMo Telescoping Fiberglass Masts are quick and easy to set up, so they are ideal for portable operations such as Field Day, POTA, or a quick activation from a balcony or backyard. These reinforced telescoping masts are rigid, non-conductive, and easy to transport in your car or carry-on luggage. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Features and Specifications: * Extended Length – 19.69 ft. (6M) * Retracted Length – 2.13 ft. (65cm) * Bottom O.D. – 1.57 in. (40mm) * Top O.D – 0.16 in. (4mm)
( 3 )
$155.99
SOTAbeams Tactical Mini Compact Ultra-Portable Telescopic Mast
SOTAbeams Tactical Mini Compact Ultra-Portable Telescopic Mast is small enough to fit in a backpack. It is tall enough to support an antenna, strong enough to withstand the elements and light enough that you can carry it with you anywhere you go! Portable operators need something lightweight and transportable to support their antennas. The Tactical Mini was designed with those features in mind. Even in the most demanding situations the Tactical Mini will not let you down. A great support for the Band Hopper 2 and Band Hopper 3 it is also the perfect support for a ground-plane antenna for 20M, dipoles and end-fed half wave antennas. SOTAbeams Tactical Mini Features: * Heavy gauge pole sections—the perfect balance of strength, stiffness, and weight for more demanding applications * Super short-packed length for easy transport in a backpack * Fits in aircraft carry-on baggage (always check before flying) * The very best extended length for tactical use in extreme conditions * Telescopic - perfect for rapid deployment * Military colors for low visual signature * Camouflage carry bag with draw string * Built-in base shock absorber * Non-conducting low-loss fiberglass construction * Hollow top-section allows wires to be fed through * Screw-cap base allows field repairs and section swap-outs * Perfect for use with the Band Hopper antenna range Detailed Specifications: -- Extended length: 19.6 ft. (6 meters) - Lengths approximate -- Packed length: 22.1 in. (56 cm) -- Number of sections: 11 -- Wall thickness: 0.04 in. (1 mm) bottom and top -- Weight: 1.5 lbs. (0.7 kg) -- Mast Material: heavy-duty glass-fiber composite (non-conducting for best RF performance) -- Tube diameter: Top 0.16 in. (4 mm); Base 1.53 in. (39 mm) -- Base cap diameter: 1.85 in. (47 mm) -- Tube color: Pantone 19-0622 TPX Military Olive -- Mast sections hollow to the top -- Supplied with camouflage carry bag with drawstring -- High impact foam shock absorber built into base. FAQ: -- The mast is made of Glass Reinforced Plastic (GRP) = Fiberglass. This is an insulator with excellent RF properties (very low loss). -- The packed length can be reduced to 21.3 in. (54.2 cm) by removing the top and bottom caps—useful in some airline carry-on bags. The maximum dimension for an airline carry-on bag is typically 22 x 14 x 9 in. (56 x 35 x 22 cm). -- Friction lock: pull each section firmly with a twisting motion for best lock. When erecting always start with the smallest section. When taking down always start with the largest section. -- Mast sections may be removed by unscrewing the endcap at the bottom of the mast, pulling out the shock absorber and removing unwanted sections. Always replace the shock absorber before use.
( 14 )
$190.99
Bushcomm Portable Mast Kits
Bushcomm Portable Mast Kits are not antennas but are lightweight, transportable pole kits for use as a temporary 5-meter tower solution in the field. These are great accessories for Field Day or other portable ops. Not recommended as a permanent base station setup, this is a temporary solution that comes complete in an easy to carry and highly-portable package. These kits are complete with all the necessary tools and hardware for installation, making them a quick and easy answer for temporary, light-duty, portable mast needs. Bushcomm Mast Kit contents: * Carry bag, NATO Green, with snap closures * 5m (8-piece) x 25mm diameter aluminum mast, powder-coated NATO green * Includes spike for securing mast base in one spot * Three guy stakes * Hammer for use with mast spike and guy stakes * Three 7-meter guy sets (winder/tensioner, VB cord, Velcro strap, snap hook) * 15-meters of coax with UHF connectors and UHF to BNC adapter * NOT intended to support rotators, directional antennas or other heavy items More product details: * 5 meter high mast made of 8 swaged sections * Tubing is held together with elastic shock cord for quick assembly * Guy plate sits at approximately 4.5 meters for guy rope attachment * Guy ropes include winder/tensioner for quick rewinding, Velcro strap for secure storage and snag free snap hook for easy attachment and release * Mast has a snap hook at the top for attaching the antenna and has Velcro loops for fastening the coaxial transmission cable If you like working SOTA, SPOTA, portable QRP or other away-from-home activities, then one of these lightweight, compact, portable mast kits may be EXACTLY what you are looking for. Just consider all of the wire-antenna projects you could loft! Order your Bushcomm Portable Mast Kits from DX Engineering, pack up, and get out there!
Not Yet Reviewed
$1,120.99
DX Engineering Telescoping Fiberglass Tubing Sets
DX Engineering Telescoping Fiberglass Tubing Sets are available in four different sets, made from high quality, pultruded fiberglass tubing with a nominal 0.120 in. wall thickness, that is smooth finished for long term use. The two shorter sets have 48 in.. sections, one has four pieces with a 2 in. bottom section that can extend to 15 ft., and the 7 piece set that extends to 25 ft. has a 2.50 in. base. The two sets that extend to 46 ft. tall consist of seven 90 in. sections. The standard set starts with a 2 in. base and the Heavy Duty 46 ft. model features a massive 3 in. bottom section. See the included sizes in the chart at each kit's images and at the "More Detail" link. These "TF" Telescoping Fiberglass Tubing Sets are the only available fiberglass tubing which does not include clamps. These tubing sets plus the DX Engineering "CLC" Cam Lock Clamp Kits are the components of the "TFK" Complete Fiberglass Tubing and Cam Lock Clamp Kits, sold as combinations. DX Engineering Telescoping Fiberglass Tubing Sets are ready to ship at low cost, these all new 4 ft. and 7.5 ft. sets of sturdy tubing are available for any project. Order yours today!
( 49 )
$78.99
—
$210.99
DX Engineering Stainless Steel Telescopic Whips
DX Engineering Stainless Steel Telescopic Whips combine rugged durability, corrosion-resistant stainless-steel construction, and a compact collapsible design. Engineered for portable HF operation, these versatile whips are ideal for POTA, SOTA, DXpeditions, EMCOMM, and other field deployments, delivering reliable performance wherever your operating adventures take you.
( 1 )
$59.99
—
$79.99
Chameleon Antenna CHA SS25 Stainless Steel Telescopic Whips
Chameleon Antenna CHA SS25 Stainless Steel Telescopic Whips are a rust-resistant, 14-section stainless-steel whip that extends to 25 feet and collapses down to approximately 27 inches. Its premium stainless steel telescopic sections make it an ideal choice for building collapsible multi-band dipoles, mobile, portable, and base antennas. NOTE: Cannot be used with the CHA TDL (Tactical Delta Loop)
( 31 )
$100.00
REZ Antenna Systems Z-17CSS Compact Telescoping Whips
REZ Antenna Systems [Z]-17CSS Compact Telescoping Whips are compact, travel-optimized 17.5-foot telescopic stainless steel whip antennas designed for operators who need serious performance in a more packable form factor. With a shorter collapsed length and a full extra 6 inches of extended height over traditional 17' whips, the [Z]-17CSS provides enhanced tuning flexibility when external factors—like ground conditions, coil loading, or terrain—call for just a bit more whip. When paired with the Scout base, the Z-17CSS is resonant as a ¼-wave vertical from 20 through 6 meters. It can also be loaded for 40 meters using the Scout 4017 coil, Recon 40, or Ranger 80 systems—making it a highly versatile whip for portable HF operation. The [Z]-17CSS uses a riveted base rather than a cross pin—an upgrade that ensures the internal wall of the tubing is tightly clamped to the threaded base for excellent mechanical strength and consistent electrical contact. With 17 telescoping sections and a 1,000-watt PEP rating, the [Z]-17CSS is the ideal whip for operators who prioritize minimal pack size without sacrificing performance or ruggedness in the field.
( 7 )
$75.00
Chelegance Portable Telescoping Antenna Tripods
Chelegance Portable Telescoping Antenna Tripods are versatile and portable antenna tripods designed to support antennas like the MC-599 and JPC-7, making them ideal for various portable operations such as EMCOMM, POTA, and SOTA. Constructed from lightweight yet durable aluminum alloy, these tripods offer both stability and ease of transport. Additionally, they feature 5 adjustable sections, enabling flexible height adjustment from 4.6 to 15.75 feet and include a 5/8-inch diameter mounting stud with 1/4-20 inch threads on top. The tripod legs fold out to a diameter of approximately 4 feet, providing a solid foundation for antenna deployment. With a weight capacity of 19.62 pounds and a total tripod weight of just 9.0 pounds, the Chelegance CH0030029-O2 combines strength and portability, making it a reliable choice for amateur radio enthusiasts and professionals alike.
( 6 )
$125.99
DX Commander Vertical Antenna Replacement Telescoping Masts
DX Commander Vertical Antenna Replacement Telescoping Masts are identical to the telescoping masts that are supplied with each of the DX Commander Vertical Antenna kits. These telescoping masts share the same specifications as the original masts and serve as direct replacements.
( 53 )
$60.00
—
$320.00