Get All the Fuel Flow Your High Performance Vehicle Needs with FUELAB Fuel System Components

It doesn’t matter if it’s winning races or just making gobs of power that drives you, FUELAB has your fueling needs covered. Their efficient, high-flow fuel pumps, filters, and fuel pressure regulators deliver the reliability and consistency needed to keep your engine running at peak performance. 

2800 Series SAE Flange Twin Screw In-Tank Brushless Fuel Pump
Put the same fuel pump to work on your car that racers count on to put them in the winner’s circle week after week. The FUELAB 2800 Series SAE Flange Twin Screw In-Tank Brushless Fuel Pump flows as much as 291 GPH/1,100 LPH at 45 PSI to feed engines making up to 2,800 horsepower. Its design allows it to be easily installed in fuel cells with fabricated reservoirs using the popular flange-style SAE 10-bolt mounting pattern. Features include:

• Billet aluminum construction with MIL-A-8625 Type II matte black anodized finish
• Compact design with low 2.5 pound overall weight
• 125 PSI maximum operating pressure
• Super-efficient DC brushless motor with Neodymium rare earth magnets for low current draw
• Long life, multi-fuel compatible fluorosilicone static seals
• Accepts -8 AN standard and port-style male fittings
• Works with 12- to 16-volt electrical systems
• Limited lifetime warranty

The FUELAB 2800 Series SAE Flange Twin Screw In-Tank Brushless Fuel Pump is compatible with most aftermarket ECUs with PWM output frequencies in the 100-5,000 Hz range. It can be used with gasoline, diesel, methanol, and ethanol fuels. FUELAB recommends using the pump with their 595 Series Fuel Pressure Regulators or others regulators with .328-inch or larger orifices for best performance. 

FUELAB also has other electric fuel pumps with the same fuel flow as the 2800 Series:

• The FUELAB In-Tank Twin Screw Brushless Fuel Pump Kit can be remotely mounted in standard-type fuel cells
• The FUELAB High Efficiency EFI In-Line Fuel Pump is the one you want for external mounting in the trunk or along the chassis.

PRO Series Extreme Flow In-Line Fuel Filters
A massive 10 GPM flow capacity with reduced pressure drop and significantly increased filtration make FUELAB PRO Series Extreme Flow In-Line Fuel Filters a rockstar in the fuel filter world. Features include:

• Billet aluminum construction with MIL-A-8625 Type II matte black anodized finish
• 200 PSI maximum operating pressure
• Cleanable 100 micron stainless steel element that prevents pump cavitation when the filter is used as a fuel pump pre-filter
• Reduced maintenance frequency
• Available with -10 AN and -12 AN male inlets and outlets
• Limited lifetime warranty

FUELAB PRO Series Extreme Flow In-Line Fuel Filters can be used with gasoline, diesel, methanol, and ethanol fuels. They include stainless steel T-bolt style mounting brackets. 

PRO Series Extreme Flow Spur Gear Fuel Pump
Get power and proficiency at its best with a FUELAB PRO Series Extreme Flow Spur Gear Fuel Pump. Compatible with gasoline, diesel, ethanol, and methanol fuels, this high-precision spur gear fuel pump flows seven GPM of fuel at 45 PSI to supply engines making up to 4,800 horsepower. Other features include:

• No add-on voltage regulators or pump controllers required
• Compact design
• 100 PSI maximum operating pressure
• Super-efficient DC brushless motor reduces current draw
• Low mass rotor for high speed reaction to changes in fuel speed and flow
• Round billet aluminum housing with MIL-A-8625 Type II matte black anodized finish
• Long life, multi-fuel compatible fluorosilicone static seals
• -12 AN inlet and -10 AN outlet ports
• Works with 12- to 16-volt electrical systems
• High-quality T-style mounting brackets included
• Limited lifetime warranty

The FUELAB PRO Series Extreme Flow Spur Gear Fuel Pump can accept PWM input for speed control, if desired. It must be used with a regulator with a return capacity of 10 GPM minimum, such as FUELAB 565 Series Fuel Pressure Regulators.