Get That Grease Where It Needs to Go with LockNLube Grease Guns and Accessories

Greasing fittings is one of those jobs nobody looks forward to doing but is all-so-necessary. Make sure you get that grease where it needs to go with a LockNLube grease gun, locking coupler, and grease gun fittings.

Original Grease Buster Fitting Cleaning Tool
Getting old, dried-up grease out of greaseable fittings, U-joints, bushings, non-sealed bearings, and other parts was a tough job. But that was before LockNLube created the Original Grease Buster. Simply fill the Grease Buster with a solvent and carefully tap the piston with a regular hammer—the combination of the penetrating fluid and hydraulic pressure will clean and flush out those clogged-up grease fittings quickly and without a fight.

You can make the Grease Buster even more effective by replacing the tool’s piston with the optional pneumatic piston that allows the use of an air hammer. The added force and vibration works the penetrating oil even deeper into a clogged fitting. We also have a hose extension that replaces the installed Grease Buster coupler so you can clean fittings in hard-to-reach spaces. The extension comes with a heavy-duty, four-jaw coupler to attach securely to the Zerks on your fittings.

Professional Dual Mode Grease Guns
The LockNLube Professional Dual Mode Grease Gun features a patented two-piston mechanism that combines the pressure or volume of a lever-style grease gun with the one-handed operation of a pistol grip. Just tap the dual-mode button on the gun body to switch from high pressure to high volume grease delivery.

Other features include top and front discharge ports, a top-mounted air bleed control, and a 20-inch whip hose with an inline swivel. The Professional Dual Mode Grease Gun comes with a rebuild kit and is available with a standard grease coupler or LockNLube’s XL coupler that has a longer reach to get at recessed fittings.

Spin-On Grease Gun Kits
If you use spin-on grease cartridges in your shop, LockNLube has some grease gun kits you will like. Available with lever-style or pistol grips, the guns are easy to use—just uncap the grease cartridge and spin it onto the gun. The pre-installed follower pulls up as you grease and scrapes the cartridge clean with no oily drips or wasted grease.

Other features include:
• Fast and easy reloading without unscrewing the head
• No air pockets or air bleeding required—just push up on the plastic follower
• Robust aluminum diecast head and sturdy lever
• Non-slip textured powdercoated finish for extended service life
• Tube of TRC Paragon 3000 lithium grease included

Locking Grease Gun Couplers
LockNLube’s Locking Grease Gun Couplers make sure the grease gets into the fitting and not splooge all over the place. Compatible with all grease guns and grease fittings, the couplers have a sliding sleeve and four spring-steel jaws that lock onto Zerk fitting to create a leakproof seal. The couplers are rated to 10,000 PSI—once they’re locked on a fitting, they won’t pop off under pressure. And if a fitting becomes pressurized (especially a recessed one), just depress the thumb lever and release the coupler.

LockNLube Grease Gun Couplers are fully rebuildable and come with a rebuild kit. If your coupler starts to leak, simply replace the seal and jaws and it will be as good as new. Your choice of standard-length or extended-reach couplers.

Summit Racing carries many other LockNLube grease guns plus grease fitting kits, quick-connect accessory kits, Colby bolt-on tire valve stems, and other accessories.

SEE LOCKNLUBE GREASE GUNS AND ACCESSORIES AT SUMMIT RACING